I am new to the smartphone world. maybe this is a stupid questions. I have rooted my phone and flash the overstock 1.5 kernel. I also download the BLN app to enable the BLN. But when i have a missed call, my LED keys still do not light up. what else do I need to do to enable the led notification for missed calls? Thanks.
Related
I can't get my led notification to work in any SC 2.X
I know that led control is supported by kernel.
I'm currently on SC 2.8, I tried all the led control app from the market but still a no-go.
Anyone found a way around this?
If by LED control, you mean Backlight Notifications, where the soft keys light up on certain events, then no. We don't have kernel sources so we can't build a kernel with BLN built-in to do so.
The Fascinate doesn't even have an LED (I WISH!!)
deaffob said:
I know that led control is supported by kernel.
Click to expand...
Click to collapse
That's your problem.
We don't have the source code for this rom yet, so this no BLN or high fidelity audio fix from super curio...
misses my voodoo sound fix :-/
I tried all three kernels currently available for GB, none of them supports blinking LED. Then I tried to install BLN control and blinky, but unfortunately BLN control complaints about kernel not supported. Are the folks on GB out of luck for now?
TIA!
cohomology said:
I tried all three kernels currently available for GB, none of them supports blinking LED. Then I tried to install BLN control and blinky, but unfortunately BLN control complaints about kernel not supported. Are the folks on GB out of luck for now?
TIA!
Click to expand...
Click to collapse
The Fascinate doesn't have a notification LED...unless you are referring to the camera LED..If you want that to flash, try a flashlight app or something similar, but I don't think there is a way to make the camera LED flash for notifications, although would be kinda a cool..
alright whatever you call them. I really mean the softkeys that can be used as notifications. Blinking can be done by using BLN control pro or blinky, as long as kernel is supported. However, BLN control does not seem to like any of the kernels GB has....
speedingcheetah said:
The Fascinate doesn't have a notification LED...unless you are referring to the camera LED..If you want that to flash, try a flashlight app or something similar, but I don't think there is a way to make the camera LED flash for notifications, although would be kinda a cool..
Click to expand...
Click to collapse
The BLN built into JT's kernel, nemesis2all's, and Tk-Glitch's isn't BLN its something else. That's why they work but can't be controlled by BLN or blinky. Tk-Glitch has a good write up on what he uses for his kernel and his plan to impliment BLN control. Check here.
As we all know, the sgs2 doesn't have notification leds. However, we do have leds under the menu and back buttons. I was wondering if anyone knows of any app that takes advantage of this. I want to use the menu and back button led as a notification led. Periodically flashing would be extremely helpful. I know there is NoLed on the market but that isn't the most elegant solution. Perhaps even using camera flash on minimum minimum brightness could be doable.
You need BLN for that. (Back Light Notification)
1- You have to flash BLN compatible kernel for that. For example- Ninphetamine.
2- You need to have liblights.zip installed. You can find it from Jame Bond thread.
3- You need to install BLN Control Pro for that, free version wont work for Missed calls and stock SMS/MMS app.
4- If you want notification for stock SMS/MMS app then you have to install 'Light Flow Lite' from market.
I was recently using it with that kernel, but I don't like that kernel at all.
Besides flashing too many things for just a simple light notification is very kiddish. Got rid of BLN and back to CF. No intention of getting it unless it start supports all kernels.
Regards.
Im running the villainROM 2.4.2 with ninphetamine kernal and XXKG6 installed.downloading the BLN app from the market you get that.
http://forum.xda-developers.com/showthread.php?t=1198334
Has anyone noticed the red light that appears at the top of the phone next to the front camera and sensor? I've only really noticed it once the phone has been fully charged.
Perhaps this could be used to indicate a notification, assuming there isn't an app that already uses this light?
Lol, thats the Proximity sensor taking effect dude.
Sent from GT-I9100
Well whatever it is, could it not be used as a notification indicator if it hasn't already been?
Sent from my GT-I9100
No sir, it can only be used in a call when you put your phone near your face/ear it helps to turn off the screen.
Regards.
Wait, so that really is an led light?! I've never seen it go off, it would be sweet to have a red notification led, just like my old Blackberry... BLN works okay for now, though is is NOWHERE as bright as the led on the blackberries.
I started using NoLED, coming from a Desire I was a bit disappointed. I like NoLED but I'm concerned about the impact it has on battery even though I have mine set to 1% brightness and I rather have the standard icons on screen rather than the custom icons to be honest.
ithehappy said:
You need BLN for that. (Back Light Notification)
1- You have to flash BLN compatible kernel for that. For example- Ninphetamine.
2- You need to have liblights.zip installed. You can find it from Jame Bond thread.
3- You need to install BLN Control Pro for that, free version wont work for Missed calls and stock SMS/MMS app.
4- If you want notification for stock SMS/MMS app then you have to install 'Light Flow Lite' from market.
I was recently using it with that kernel, but I don't like that kernel at all.
Besides flashing too many things for just a simple light notification is very kiddish. Got rid of BLN and back to CF. No intention of getting it unless it start supports all kernels.
Regards.
Click to expand...
Click to collapse
Wooaaa.....
why such hassle?
i thought android suppose to be the smarted OS. :-(
back when i was using symbian, light signal plus, a simple app can make softhey LED lit up.
i was hoping theres a widget or app in android that can do the same thing.
rooting or flashing for such small function seems overkill. :-(
Ray1 said:
Wooaaa.....
why such hassle?
i thought android suppose to be the smarted OS. :-(
back when i was using symbian, light signal plus, a simple app can make softhey LED lit up.
i was hoping theres a widget or app in android that can do the same thing.
rooting or flashing for such small function seems overkill. :-(
Click to expand...
Click to collapse
Android is the smartest OS but it isn't the simplest one. And as an user, not a dev, I don't like that too.
I also remember about Light Signal Plus when I had 5800XM.
Regards.
I was wondering how these worked, right now I have it enabled. Whenever I miss a call the bottom buttons on the bottom light up (menu, home, back...) and they do not go away until I clear the missed call notification. I was wondering if this is the way it is supposed to work? all there is to it? are there any settings where I can make them blink? I was thinking it would be more like the app noLED.
I'm sorry if this is a N00b question with an obvious answer, I have searched but can't find the answer.
thanks for any/all replies!
That's referred to as BLN (BackLight Notification). Its supposed to light up for missed calls, texts, emails, or any other notification. Its suppoed to state lit up til you clear it. What you are describing is expected behavior. There is an app in the market called BLN something, to manage it, built for the Captivate. There is also an app called blinky that worked on the captivate to make them blink.
In theory it should work better than NoLED, it should take less battery and processor. It hasn't been implemented in the stock based ROMs (for the S II) because it causes the phone to not enter deep sleep mode (as does noLED). It must be new to CM7. Hopefully if it doesn't cause a wake lock in CM7 it can be ported back to stock based ROMs. This is the last feature I was looking for in the custom ROMs for this phone.
Sent from my Galaxy S II (i777)
Yes what he said above except Blinky and BLN APP will not work for cm7 on the SGS2. Cm7 has its own setting to control it. You can disable them if you don't want to use led notifications from with the settings or CyanogenMOD settings.
Yes it creates a wakelock until you clear the message, missed call, etc. Then the wakelock goes away. Also there is a timeout for the led notification that can be controlled also.
Sent from My KickAss CM7 Captivate
Hey guys,
I recently changed my i9100 SGS2 from stock firmware to CM11m7. I have to say, I am really impressed with the increase in speed and the new options it gives me. One of those options that I just found out about is BLN. Since the SGS2 has no notification led, and NoLED draws quite some battery, this seems like a nice feature.
Of course I figured out that BLN is not supported by the CM11 kernel. So I upgraded to the kernel from Gustavo_s (the newest build from 06/21). As of yet, I am not really sure though which software or settings I need to get BLN running! What I've done so far is that I installed STweaks. This recognizes that my kernel supports BLN. When I switch to the BLN tab in STweaks, I am able to configure BLN to my liking, and also the test works fine (Click on Test BLN, switch off screen with power button, touchkeys get illuminated).
However, I have not understood yet how I can make my applications put a notification to be shown by those leds. WhatsApp for example has a setting to show notifications with the led. But it doesn't show anything. Then, most of the stock apps seem to just have no such option, since notification led is no feature of SGS2 (but I thought that the BLN mod inside Gustavo_s' kernel would take care at least for the apps that have such setting).
So I thought that maybe the much used app BLN control might do the trick. Upon starting, this gives me the message that my current liblights does not support BLN. No idea what to do with this. If I can upgrade, if I need another kernel. Simply no idea. And the app's homepage doesn't give me any hint. Another thing I tried was Light Flow. Here I have two extra options in the LED setting, one being sec_touchkey and the other being touchkey panel. Activated both. Also activated root mode. No chance. Even the notification test in Light Flow doesn't light any of the two touchkey leds.
Has anyone any idea, what I need to do? Can I upgrade liblights? Is it a thing of the kernel? Any suggestions maybe for another kernel to use (Dorimanx maybe?).
Any help is much appreciated!
treysis said:
Hey guys,
I recently changed my i9100 SGS2 from stock firmware to CM11m7. I have to say, I am really impressed with the increase in speed and the new options it gives me. One of those options that I just found out about is BLN. Since the SGS2 has no notification led, and NoLED draws quite some battery, this seems like a nice feature.
Of course I figured out that BLN is not supported by the CM11 kernel. So I upgraded to the kernel from Gustavo_s (the newest build from 06/21). As of yet, I am not really sure though which software or settings I need to get BLN running! What I've done so far is that I installed STweaks. This recognizes that my kernel supports BLN. When I switch to the BLN tab in STweaks, I am able to configure BLN to my liking, and also the test works fine (Click on Test BLN, switch off screen with power button, touchkeys get illuminated).
However, I have not understood yet how I can make my applications put a notification to be shown by those leds. WhatsApp for example has a setting to show notifications with the led. But it doesn't show anything. Then, most of the stock apps seem to just have no such option, since notification led is no feature of SGS2 (but I thought that the BLN mod inside Gustavo_s' kernel would take care at least for the apps that have such setting).
So I thought that maybe the much used app BLN control might do the trick. Upon starting, this gives me the message that my current liblights does not support BLN. No idea what to do with this. If I can upgrade, if I need another kernel. Simply no idea. And the app's homepage doesn't give me any hint. Another thing I tried was Light Flow. Here I have two extra options in the LED setting, one being sec_touchkey and the other being touchkey panel. Activated both. Also activated root mode. No chance. Even the notification test in Light Flow doesn't light any of the two touchkey leds.
Has anyone any idea, what I need to do? Can I upgrade liblights? Is it a thing of the kernel? Any suggestions maybe for another kernel to use (Dorimanx maybe?).
Any help is much appreciated!
Click to expand...
Click to collapse
U can try Dori (the 10.Xx branch) along with 'Stweaks' and see
treysis said:
So I upgraded to the kernel from Gustavo_s (the newest build from 06/21). As of yet, I am not really sure though which software or settings I need to get BLN running!
Click to expand...
Click to collapse
The post of Gustavo_s clearly say:
KNOWN PROBLEMS
- Stweaks is not working at the moment, and i can't work to fix it because of reasons above.
Still, however, there is a workaround
Install Gustavo_s Kernel's from 21/4 (search for it) + STweaks
Really, its my config.
Cheers
Im speak spanish, sorry.
Or use Gustavo_s Kernel's with synapse.