I recently installed the 2.2 Froyo rom from Wolf running with 58 baseband
http://forum.xda-developers.com/showthread.php?t=945264
It was working perfectly fine at first.
Then I installed some apps/games then I turned off phone and charged it.
Now whenever my phone is turned on, pops up saying process is not running, force close or wait. Even when I press force close or wait, nothing happens.
For some reason, it cannot even pick up my sim card and when I connect my phone to the computer, my computer picks it up but my phone does not.
It keeps doing this, I need help. :S
How do I fix this? :S
Have u tried reflashing wolf's rom? that might do it. Remember to wipe phone, all caches, and battery stats before hand in xrecovery. Try that first then post weather or not that worked. I have other ideas if that doesnt work.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
if i recall correctly you must not charge the phone while it's OFF, that's when this will start to happen
reflash/restore and all will be ok
Okay I will try. I doubt I can reflash because it doesn't seem to pick up my SD card and Sim card.
Voelker45 said:
Have u tried reflashing wolf's rom? that might do it. Remember to wipe phone, all caches, and battery stats before hand in xrecovery. Try that first then post weather or not that worked. I have other ideas if that doesnt work.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Click to expand...
Click to collapse
Yup, I did all that, I went through the Wolf's instructions. Gahhh. Dx I can't reflash because it doesn't seem to pick up my SD card anymore including my SIM card. T_T. :S
Astral07 said:
if i recall correctly you must not charge the phone while it's OFF, that's when this will start to happen
reflash/restore and all will be ok
Click to expand...
Click to collapse
I would if I could since process system does not respond I can't access my SD card, because it won't pick it up and also my SIM card.
I have a few other solutions. U should first try flashtool and totally start over with the ROM flashing.
The flashtool link is in the x10 android development section. I use the 54 baseband for me
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Voelker45 said:
I have a few other solutions. U should first try flashtool and totally start over with the ROM flashing.
The flashtool link is in the x10 android development section. I use the 54 baseband for me
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Click to expand...
Click to collapse
So is it actually possible to flash the rom through flashtool instead of xrecovery?
As in the Froyo rom.
Plus what is the difference between baseband 54 and 58?
I am trying something right now. I flashed it back to version 2.1. It worked! Now I'm gonna try and install the baseband 54 then Froyo 2.2
EDIT: It seems to work flawlessly now! Let's see what happens. :S
Wow, 2.2 Froyo works fine now, no process.system fail but now it cannot pick up SIM card. I went to dev tools, bad behaviour, crash system server. It did nothing. I factory reset phone it did nothing. Plus now for some reason, it says unknown baseband and I tried both 54 and 58 baseband. Gosh. T_T
EDIT: I rooted it, installed apps/games on flashtool. APK files done. Now when it starts up, it's stuck on the Sony Ericsson title. Ohhh, come on. T_T
i guess you have to start over from scratch... make sure all steps are done correctly.
rjumonong said:
i guess you have to start over from scratch... make sure all steps are done correctly.
Click to expand...
Click to collapse
I'll try again, maybe another 2.2 Froyo rom, who do you recommend? Link me and I will try it.
Froyo 2.2 rom from Wolf works fine now except for Market which I downloaded and flashed into phone. Pops up when I open Market with.
"Sorry! The application Market (process com.android.vending) has stopped unexpectedly. Please try again".
How do I fix this?
EDIT: Well, I went yo charge phone while it was on, pops up with process.system is not responding again. T_T
Hey im having the exact same problem, how did you fix it?
Can someone send me a link to another Froyo 2.2 rom that they would recommend?
EDIT: Turns out that newmarket.zip is the problem coursing tee process.system crash. Took me a while to figure it out. T_T
EDIT2 : I don't know anymore... T_T
I do not get this at all. I used xrecovery on CM 6.1.3 [v05].zip and CM Update v053.zip and works fine at first, once I turn off or reboot it pops up with process.system is not responding. ARGH.
Related
Hello:
I can't get the new market to work in freex10 beta 4. Everythings is perfect, no FC, and the old market list all my installed apps, but i can not install the new market. I tried de vendind.apk version 2.2.11 but when i try to install i get an error!
What am i doing wrong??
Tks guys!
maybe try the neon market?
is awesome.
Ok, i'll try. But i really want the new market to work, for my updates and the new stuff that you can intall apps direct from you pc.
help please
hi im new here
i have tryed to upload my x10 to 2.2 freex10 beta 4 and can get it to run
but it loads up and keeps restarting and says no signal....
i have followed the guide but cant find any help to sort this problem
i have put my backed 2.1 back on phone and stick with that till get the help
thanks lee
Use my guide here
http://forum.xda-developers.com/showthread.php?t=939812
It's fool proof
Sent from my x10i GreenGlow 2.2
Try this to fix your market http://forum.xda-developers.com/showthread.php?t=937527&page=24 download the newmarket link and flash with xrecovery POST#233
ratmkickass: It worket man! Tks
No prob...
I installed Beta4 FreeX10, everything works ok, Market finds application, I give the order to install and Market does not download anything at all, remains in initiating downloads. Now I can not even install a file browser ... I returned to the factory ROM but the problem persists.
try my tutorial ^^
skyracer2006 said:
I installed Beta4 FreeX10, everything works ok, Market finds application, I give the order to install and Market does not download anything at all, remains in initiating downloads. Now I can not even install a file browser ... I returned to the factory ROM but the problem persists.
Click to expand...
Click to collapse
If things get stuck at downloading its normally a problem at goods end not yours. Have you tried going to settings/manage applications/all applications/market and clean clear the cache and force close it and then rebooting to solve your problem. This works most of the time
Sent from my x10i GreenGlow 2.2
steve.adams.x10 said:
If things get stuck at downloading its normally a problem at goods end not yours. Have you tried going to settings/manage applications/all applications/market and clean clear the cache and force close it and then rebooting to solve your problem. This works most of the time
Sent from my x10i GreenGlow 2.2
Click to expand...
Click to collapse
Yes, i tried.
- Begin with my X10 in 2.0.2.A.0.24
- I installed first the baseband with your "Baseband 2.1.54, A beginners guide for x10I / x10a"
- BusyBox and xRecovery installed an works ok.
- Flash Beta4 with xRe3covery and all ok, except by this problem with market.
- Restore full backup and the Oficial ROM works ok, except again with market.
- Recovery with SE PC Companion, and all works except by Market. Curiosly... xRecovery doesn't work (Back key after Sony Ericson logo), it's possible that PC Companion erase it.
- I flash the ROM X10i_2_0_A_0_504_GLOBAL
- With SuperOneClick, i rooted again my X10
- With FlashTool, install BusyBox and xRecovery (by Advanced), but xRecovery don't load.
- At this moment, i have a X10 with:
Model: X10i
Firmware: 2.1-update1
Baseband: 2.0.46
Kernel: 2.6.29 [email protected]#1
Build Number: 2.0.A.0.504
Without any posibility of install any app!!! My X10 return to a single Nokia 1100 state
You need to root your device with the flash tool and install xrecovery with it too and then go back to my guide
Sent from my x10i GreenGlow 2.2
Same problem occurs with me...but solved after changing network operator. I have two sims, works fine on one and does't download on another. I think its network setting problem.
Sent from my X10i using XDA App
skyracer2006 said:
I installed Beta4 FreeX10, everything works ok, Market finds application, I give the order to install and Market does not download anything at all, remains in initiating downloads. Now I can not even install a file browser ... I returned to the factory ROM but the problem persists.
Click to expand...
Click to collapse
I have the same problem with the old market. To install anything you just have to wait, after a while you will see selected app downloading and installing. If it takes more then 4 minutes just cancel your download, start it again and wait. That's why i have to use new market.
Sent from my X10i using XDA App
geordieboy2011 said:
hi im new here
i have tryed to upload my x10 to 2.2 freex10 beta 4 and can get it to run
but it loads up and keeps restarting and says no signal....
i have followed the guide but cant find any help to sort this problem
i have put my backed 2.1 back on phone and stick with that till get the help
thanks lee
Click to expand...
Click to collapse
I had the same problem, it's an issue of baseband. You just have to install new baseband (2.1.54) using flasher(not sure if it's the right name of this program). If you want to install new rom, you won't be able to recovery the old android 2.1 because the old baseband is not available on the internet. Think about that! Because it's akready to late for me
Sent from my X10i using XDA App
My x10 is stuck in a boot loop after I flashed the ROM.
How do i stop this from happening? I really like the look of the ROM over my current one.
Please help.
EDIT: Managed to get freex10 ROM running. So I have a useable phone now.
flash baseband which is included in the package and you should be fine
what bb are you using?
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
Same Issue I think
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
You probably need to use flashtool to flash the .52 baseband fix. Unless you have .52 already.
If that doesnt work, try flashing 2.1 totally over again with flashtool.
Sent from my X10i using XDA Premium App
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
ChrisDude70 said:
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
Click to expand...
Click to collapse
Will send you some links on a second. Will post them here with guides too.
Flashtool:
http://forum.xda-developers.com/showthread.php?t=920746
The flashtool guide:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Sent from my X10i using XDA Premium App
To get out of the bootloop just flash back to 2.1 and start over again. And make sure to follow the instalation instructions given by the dev when flashing the rom.
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
ChrisDude70 said:
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
Click to expand...
Click to collapse
The file you use in flashtool is an .ftf file
Sent from my X10i using XDA Premium App
Then what do I do with a .zip?
yes, you DO flash the .zip file with xrecovery. step one, flash bb with flashtool, step two, start phone in xrecovery and flash .zip, reboot, and it should work.
Sent from my X10i using XDA Premium App
drearystate said:
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
Click to expand...
Click to collapse
first try SEUS that comes on your ROM( left click SE icon in 'my computer' install) if that one doesn't work, uninstall and install SEUS from SE site, but one of them will say 'repair'
Sent from my X10i using XDA Premium App
ps: make sure your phone is fully charged
Sent from my X10i using XDA Premium App
Yeah, that's what I did the first time.
I just tried it again. Same problem.
Phone turns on, boots, sits on home screen for a few seconds then restarts.
Why would this happen?
EDIT: I managed to check the baseband version int he few seconds the phone was on, it says it is unknown. Would this cause this problem?
http://forum.xda-developers.com/showthread.php?t=928343
The ftf files you need are on the second post. Just put the ftf file in the firmware section of the flashtool then flash it and follow the on screen instructions.
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
I tried that, It keeps telling me I have my old Cyanogen mod for 2.2 installed when I do it.
In the process of running SEUS, hopefully it puts me back to 2.1
Chris603 said:
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
Click to expand...
Click to collapse
Could that stop the rebooting?
ChrisDude70 said:
Could that stop the rebooting?
Click to expand...
Click to collapse
No, i dont think that is the cause of the rebooting cause ii get that a lot but the phone never reboots on me, what kernel are you on. Cause a lot of the custom kernels reboot when the screen is off or when you have the cpu up too high.
Guys im freeeaakiin ouut my phone isnt charging anymore wtf??
What i did is install the new firmware whit the baseband .67 and then i moved on whit wolfbreak v006 and the tw patch and i saw that it wasnt charging so i just simply rebooted didnt help then i tried another wall didnt work tried my pc it still didnt work then i went back onto the new firmware and still couldnt charge?!?! I think im gonna have to buy a new extended battery ? But i know my usb port isnt broken it was working all good before that :'( pleease help asap i ran out of charge actually what it does is when i plug in it boot up for a second it then just shut down and it keeps doing it over and over ?!?!!?
I think I know you've done...you may have actually deleted(full wipe) everything via xrecovery,
I did that once and it kept doing what you described.
Just connect to Sony Ericsson Update Service (SEUS)and reinstall firmware.
Sent from my X10i using XDA App
Also then leave your phone alone, on charge on wall for a while
Sent from my X10i using XDA App
jayman1986 said:
I think I know you've done...you may have actually deleted(full wipe) everything via xrecovery,
I did that once and it kept doing what you described.
Just connect to Sony Ericsson Update Service (SEUS)and reinstall firmware.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
well i backed up the firmware whit xrecovery now it doesnt even have that but in order to do what you said i need to make my phone charge right? well my phone doesnt even do that ! :O
flash bb .54 first, wipe in xrecovery, after that reinstall Wolfbreak TW7.
if it can not fix your problem, try to using another charger (with the same micro usb port like original charger).
hope this help
Never mind. Just repaired everything.
(Mod, please delete this thread.)
shahkam said:
well i backed up the firmware whit xrecovery now it doesnt even have that but in order to do what you said i need to make my phone charge right? well my phone doesnt even do that ! :O
Click to expand...
Click to collapse
Just leave it connected on wall charger for about 45 minutes coz you'll probably know SEUS won't do anything if battery is below 50%. Then do what I said.
I reckon it IS still charging, so even though it keeps rebooting it should still charge.
Finally after leaving on charge you'll need to pull the battery out to turn phone off. Then connect to SEUS in flash mode like normal.
Worth a try, like I said I had something familiar.
Sent from my X10i using XDA App
shahkam said:
Never mind. Just repaired everything.
(Mod, please delete this thread.)
Click to expand...
Click to collapse
How did u do it?
Also No need to delete thread it can be useful for other people if they need help.
Sent from my X10i using XDA App
He ran his battery down completely and then freaked out cuz it would not switch on.
But if you just leave the phone charging for a hour it will charge and it will switch on.
Not really.. I've actually just tried what he did. I tried to flash bb67, and got a bootloop as he did. I'm using wolfbreaks Rom and it doesn't load up the Rom.
I fixed it by pulling the battery out and then reflashing bb49 which was what I was on before.
Confused..is anyone else managed to get bb67 on wolfbreaks?
Sent from my X10i using XDA App
jayman1986 said:
Not really.. I've actually just tried what he did. I tried to flash bb67, and got a bootloop as he did. I'm using wolfbreaks Rom and it doesn't load up the Rom.
I fixed it by pulling the battery out and then reflashing bb49 which was what I was on before.
Confused..is anyone else managed to get bb67 on wolfbreaks?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Do you have a X10a?
I have a x10i BB.67 wolfbreaks rom and it's perfect no bugs or problems.
OmegaRED^ said:
Do you have a X10a?
I have a x10i BB.67 wolfbreaks rom and it's perfect no bugs or problems.
Click to expand...
Click to collapse
No, I'm 10i as well. Mine is actually an original unbranded model as well.
Did you have to do a clean install?
Sent from my X10i using XDA App
Flash clean stock.
Flash BB.67
Flash WB rom.
Reboot a few times or crash system server.
Flash 007 update
OmegaRED^ said:
Flash clean stock.
Flash BB.67
Flash WB rom.
Reboot a few times or crash system server.
Flash 007 update
Click to expand...
Click to collapse
Yeah I had a feeling about clean install, to be honest I can't be bothered to do clean install again..I've done it so many times. It takes too long to set up my phone again to the way I like it.
Sent from my X10i using XDA App
Okay last week i use the superoneclick method to root my device, and have since been reading up on installing roms etc etc.
so i followed a tutorial that got me to instal busybox then xrecovery, i backed up the system before installing Bitsnacker 2.1, when it installed it started just fine, however when i opened my browser it would not close, so i rebooted the phone, it started just fine but my home screen was inexistant, it was completely black. so i figured another reboot was in order, this time i used xrecovery to reboot the phone, this just caused the phone to boot infinitely.
so i reinstaled Bitsnacker 2.1from scratch, its now working fine again, however my phone will not transmit any data, it cant connect using 3g or anything so im having to use my wifi, which is fine apart from when im out and about.
so is there nything i can do to fix this or is this a known bug in the rom? ( i couldnt find anything in the thread for Bitsnacker 2.1)
Did you wipe everything in xrecovery before you flashed the bitsnacker ROM?
Do you have the .54 baseband?
Sent from my Atrix 4G with XDA Premium App
no i didnt wipe everything, yeah i do have the .54 baseband.
the second install is still working well and is very stable anyway
cosmicbluebeard said:
no i didnt wipe everything, yeah i do have the .54 baseband.
the second install is still working well and is very stable anyway
Click to expand...
Click to collapse
If it happens again, wipe everything with xrecovery then reflash the ROM.
Sent from my Atrix 4G with XDA Premium App
Hey,
I have an Sony Ericsson Xperia X10. I had Wolfbreaks TW Gingerbread V5 on it. When i tried to upgrade it to V6 it went wrong... After i flashed it and tried to reboot my phone, my phone didn't startup anymore. I only get the white Sony Ericsson text with a black background.
If someone could help me with this I'd be very thankful!! Sorry for my bad English.
DeathPixel.
unlocked bootloader
wipe data, wipe cache n wipe delvik cache??
or maybe u don have stock 2.3.3 n .71 baseband....
sorry if dis not helping... im a noob
I can't get in my recovery menu anymore =(. I had Wolfbreaks TW Gingerbread V5 and baseband .71.
Your atleast trying to help! Its no problem.
What happened? My phone suddenly started itself and works normally again?
Start from a scratch, 2.1, root, recocery and dessired 2.3 rom wuth 2.3.tft, hope it works out,
Maybe it just needed a longer first time boot after instaling the new rom i found that when i tried wb6 it was a long long first boot but fine afterwards.
Kieron
Sent from my x10i using xda premium
harissanja said:
Start from a scratch, 2.1, root, recocery and dessired 2.3 rom wuth 2.3.tft, hope it works out,
Click to expand...
Click to collapse
Right after it was booted i cleaned everything and reinstalled my prefered ROM.
kieronw3 said:
Maybe it just needed a longer first time boot after instaling the new rom i found that when i tried wb6 it was a long long first boot but fine afterwards.
Kieron
Sent from my x10i using xda premium
Click to expand...
Click to collapse
Well it took almost exactly 24 hours untill it booted suddenly. 24 hours seem a little too long to me... But you never know!