OK people... some of you people much cleverer than me PLEASE tell me there's a way around this.
My internet at home runs through a proxy server, so I have the IP address and port.
This internet connection is broadcast using wifi around my house. My PCs can connect to this just fine, using the IP and port in my Windows networking configuration.
My Vibrant will NOT work. Here are the scenarios I am dealing with :
If I connect to the wireless I can see my home network, and browse Windows network shares on my phone just fine.
If I go into the wireless | advanced | proxy settings (I am running a Bionix 2.2 ROM - Onyx 4.2 I think) and set my proxy IP and port then I can browse the internet in the default browser but NO other apps will make an internet connection. Odd since the proxy connection seems to me to be attached to the wireless connection, not the browser specifically.
So I installed and configured transproxy 3.8 beta (which doesn't seem to be vibrant specific, but installs and configures OK), and entered the same details and enabled the proxy connection, and NOTHING, including the default browser, will make an internet connection.
In all cases my connection to the wireless network itself is perfectly fine.
I've spent a couple of days trying to find a sensible solution to this, but have found nothing helpful.
Anyone out there had any similar experiences, or better yet found some kind of awesome solution ?
Very much appreciate any answers.
Ok before I give up completely, no one has gotten a Vibrant properly connected through a proxy server? It would at least be something to know it is known to be impossible, then I could stop obsessing and concentrate on being annoyed?
Anyone?
Sent from my SGH-T959 using XDA App
are you sure you use a proxy server? I've never seen a home network that uses one. A NAT firewall / router isn't a proxy server.
If you are running a proxy server, what do your proxy server logs say?
Can you access services on other than port 80? (email for example)
Proxy on a home network isn't out of the norm. I know guys who run them to block certain sites from their kids. Yes I know there are other options out there, they just decided to use a proxy server.
Sent from my SGH-T959 using XDA App
I know I am reviving a old thread, but I am also looking for a solution to this. I have tried using AutoProxy with no luck. It configures OK, but when it is on it is as if I have no network connection at all.
I don't need authentication, it is a HTTP 1.1 compliant proxy and all I need is host and port. In my case I set up a RabbIT4 proxy on a VPS linux host in a data center with multiple redundant tier one network providers. My proxy minifys HTML, JavaScript, and CSS - then gzips it. It also replaces ADs with a 1x1 transparent gif and re-samples all images to a quality 20 jpeg.
I used to run an ISP and we did this as an optional service for our dial-up customers. It REALLY improves slow connections.
So anyhow I would appreciate it if you let me know of any solutions you found this might work. Anyone with ideas please chime in.
Try flashing a different rom and see if you have the same problem....... It may be as simple as a conflict with that rom.
I have never heard of a case where this kind of problem exists. It sounds like a rom to wireless router conflict, but assuming it is exactly what you say, then if the setting are set for example, to have controls on access then, it would stand to reason remove them from the server side it should resolve the problem. But I would look at trying a different rom 1st,
The proxy works great on my desktop, and the phone's ROM has the option to set a proxy for the Wi-Fi connection (which works). The issue is I don't need the proxy for my Wi-Fi, that is fast - I need it when I am on the edge network, which is often.
I can't change ROM, Trigger 3.3 is too perfect for me to budge. I have both busybox and iptables, so I don't know what is up.
EDIT, I have tried 3 more apps with the same results, either they don't actually set the proxy and I have net, or they do set it and I lose connection. To be fair I have only been able to test when on Wi-Fi and I could set that from the ROM options, I need to try testing when I am on cellular - I just don't think it is going to make a difference.
Friggin proxies!
be1ieve1111 said:
Friggin proxies!
Click to expand...
Click to collapse
Proxies can be your friend, my friend! Imagine getting about 30kps on edge and your trying to look something up real quick, but the pages keep timing out. Meanwhile right next to you with the same basic connection is me, happily surfing away.
Why, because instead of sending my request to the website it went to my proxy, sitting in a class 3 data center in Los Angeles. My proxy made the request for me with its OC3 Internet connection, then took all the white space out of all the HTML, JavaScript, and CSS - then it gzipped it. It also converted all images to highly compressed low quality jpegs. Finally, it sent me back the reduced size data (reduced by about 78% in fact) and all the processing happened in the blink of an eye.
With a fast Internet connection the proxy just gives you lower quality pages with twice the page load time, but on slow connections it can be up to 5 times faster. Hmm. . . 5 times faster, where have I hear that before?? Oh yea, AOL, Earthlink, and others were promising that with their "Accelerated dial-up". Guess what?! This is exactly what they where doing. It is an old Dial-Up ISP trick. That is why I know how to do it. Now if only my phone would co-operate. Friggin proxies!
bump
did you ever figure this out? I think I may have found how to do it without any applications but you'll need to be rooted.
jamesd86 said:
bump
did you ever figure this out? I think I may have found how to do it without any applications but you'll need to be rooted.
Click to expand...
Click to collapse
Do tell [10 char]
Build prop edit but I dont have a server to test with...any chance you could set up a generic account on your server to test with? Pm the details instead of putting in open if you can.
Basically adding the entry
Code:
net.gprs.http-proxy=yourproxy
To the build prop. Im not certain if there are any other lines I need to add but would like to try.
Sent from my SGH-T959 using XDA Premium App
jamesd86 said:
Build prop edit but I dont have a server to test with...any chance you could set up a generic account on your server to test with? Pm the details instead of putting in open if you can.
Basically adding the entry
Code:
net.gprs.http-proxy=yourproxy
To the build prop. Im not certain if there are any other lines I need to add but would like to try.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I lost the VPS server in the data center I was using. For best results you want the proxy to have a much better Internet connection than what is being proxied. For example - my connection in the data center was 100Mbs both up and down. When I proxied something that had the basic bandwidth of a dial-up connection in the neighborhood of 32-56kbps the speed boost was about 5 times faster. Doing the same thing for my 5Mbs cable connection was actually about twice as slow, meaning my page load times in seconds showed doubled my average total time to completely load a page and speedtest.net showed about half the bandwidth.
So this trick here is the proxy really needs a VERY, VERY good and fast Internet connection - like you get from a good hosting provider. However, if you just want to test connectivity you can try setting up your own proxy.
Here is what I was using http://khelekore.org/rabbit/ - This runs via Java, so it should work wherever you have Java available. I have successfully run in on FreeBSD, Linux, Solaris Unix, and Windows.
Will look into it but my home connection often sucks...i've also had no luck running and accessing a media server outside my home network as I think comcast blocjs that/tgis kind of tging being run on consumer plans
Sent from my SGH-T959 using XDA Premium App
jamesd86 said:
Will look into it but my home connection often sucks...i've also had no luck running and accessing a media server outside my home network as I think comcast blocjs that/tgis kind of tging being run on consumer plans
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Well this is a HTTP1.1 proxy, so you can pick any open port you want other than port 80 and it is HTTP traffic. So regardless of if they are using port blocking or protocol blocking, there really is not much way to keep you from using/running a proxy.
Any recommended other ports(like commonly open ones)
Sent from my SGH-T959 using XDA Premium App
Yeah, i'm deff going to need a lil assistance on setting this up...the faq on the site is not that great.
T313C0mun1s7 said:
Well this is a HTTP1.1 proxy, so you can pick any open port you want other than port 80 and it is HTTP traffic. So regardless of if they are using port blocking or protocol blocking, there really is not much way to keep you from using/running a proxy.
Click to expand...
Click to collapse
Certain port numbers are pre-assigned to particular applications by an international body called IANA, the Internet Assigned Numbers Authority.
8080 is assigned for HTTP-Alt, so it is the most commonly used and rarely blocked
1080 is assigned to socks (as in socks proxy) so the same applies
Just avoid a port number below 1024 so you don't conflict with a commonly assigned port and you should be fine.
I have an awesome idea...because I can't figure out how to set this ish up..set it up on your connection..i know it will be slow but just for proof of concept, send the details for access and i'll test it out..or you can edit your build.prop and test it. yep..unless you know an easier to setup one.
jamesd86 said:
I have an awesome idea...because I can't figure out how to set this ish up..set it up on your connection..i know it will be slow but just for proof of concept, send the details for access and i'll test it out..or you can edit your build.prop and test it. yep..unless you know an easier to setup one.
Click to expand...
Click to collapse
Or try this: http://aliveproxy.com/socks5-list/ or http://x-proxy.info/socks.php
These are pure HTTP proxys (like RabbIT4) and might work better: http://www.x-proxy.info/highanon.php
I tgink its a no go for now...nothing I put in the line will stay on reboot.
Sent from my SGH-T959 using XDA Premium App
Hello guys,
Another good and useful application that I found and was like a Christmas present for me. I always needed proxy configuration to browse the internet and I was not able to do it.
A while ago I started using SPQRom which has proxy configuration only for the default Android browser.
Today I found a new application that offers proxy functionality for Android devices.
If anyone is interested just download the application below. Install it. Give to it root access. Connect to your WiFi network. Start the application. Enter proxy configuration. AND.... HAPPY BROWSING.
Transparent Proxy Application
I am currently using the beta version and is working excellent.
Working with : SPQRom 0.7
Thanks!
Many thanks using it for school network
Works with cyanogenmod
Doesnt work at some places because the DNS does not resolve IPs outside the network. Is there a method to route the DNS resolution through proxy?
It will be nice if it is implemented.
I am having the same DNS problem. Many people claimed it working. I can only make the browser work to access IP addresses. No idea how other apps like market can work.
thx man like like like
Now I use proxydroid instead of this. https://market.android.com/details?id=org.proxydroid&hl=en Works better for me.
Hello
I need to connect to my companies network using the Cisco AnyConnect VPN client. At the same time, I also need to use my companies web proxy, when I wish to access the internet and even some internal sites.
Would anyone know, how this can be configured on rooted Nexus 5 or 7 devices (with OmniRom) and on a Note 3 with stock rom, all using Android 4.4.4?
I do know that I can set a http proxy in the Wi-Fi connection settings and also for the mobile data connection. But this does not seem to have an effect, when I connect to the VPN.
Well…? Any ideas how to set this up? Would be quite a blast - company is actually considering buying iPhone 6 Plus… :crying: For rather obvious reasons, that's not my preferred solution
Thanks a lot,
Alexander
Hi
Just wondering if anyone has been able to configure there android device to act as a proxy?
This may seem a silly request, but here in the UK, they have started filtering websites.
I now use my mobile to browse most of the times as the ISP Courts have not reached the Mobile providers.
So to avoid me going back and forth between devices, am wondering if its possible to just host a proxy on my
Android device.
So when using Cellar data (Not on WIFI) i can use the proxy on my android, In my PC browser, to continue browsing without restrictions?
I have paid for the app Server Ultimate pro, But can i for the love of god, Configure it to work as a proxy would.
(Keep in mind, i have installed Squid and configured on a couple of VPS)