Hello,
i bought that phone and install an app but after rebooting Android can't load and endless reboot therefore what can i do to resolve it
note the fact i didn't make any kind of backup?
thanks you for answering my question
help me please
way te recover your SK168
Hi, in the fastboot-mode you can select 'recovery'
The way you can do:
1. Turn off your phone
2. Press 'volume -' and the power button
your phone start in the FASTBOOT mode.
3. Press 'volume -' again, to select 'recovery', and press powerbutton to start.
I hope this will solve your problem.
Other Questions
Hi
Do you happen to know if there are firmware updates for this phone, or a clockwork mod ?
THX anyway for the recovery !!!
SD card PB
Hello again !
As a matter of facts, I also have a problem: The SD card often seems to unmount, and I have to reboot the phone to see it again. Is there an other way to mount it ?
A script, maybe or an App ?
THX
Hello i have the same problem as with the sd card. But in my case it seems is permanently. Doesn't matter how many times i reboot the phone.
Has someone find a solution to this?
Thanks and sorry to up an "old" thread.
Edit: My solution to the SD problem:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
Solution after reading here: hxxp://android.modaco.com/topic/299174-no-adb-no-sd/
bootet nur noch im recovery menu!
bräuchte mal eure hilfe! Bin neu hier und habe leider bis jetzt nichts gefunden was mir weiter helfen kann.
zu meinem broblemm!
ich habe ich efox Aipohne mhk 168 soll gleich sein wie das sk 168.
es ist android 2.3.3 drauf. erts lief es perfeckt doch dann hatte ich kein gps signal mehr bekommen das handy fuhr immerwieder neu hoch solange das gps an wahr. ich hatte ein backup gemacht.jetzt komme ich nur noch ins recovery menu direkt bei anmachen. habe mir auch bereits neu android softwar für dieses handy besorgt doch leider nicht als rom. wenn ich das backup starten will kommt immer ein fehler das es kein md5 gibt. wie bekomme ich die neu software installiert?
hier ein paar daten zum handy!
AIPHONE-P4.1 S-OFF
AIBOOT-2000.12.01 (AIPHONE_0000)
TOUCH PANEL-SSD
RADIO-1.0.0
15. april 2011, 17.29.02
FASTBOOT
<VOL UP> zum vorherigen Element
<VOL DOWN> to next item
<POWER> Den Eintrag wählen
BOOTLOADER
RECOVERY
REBOOT
Hallo toertchen,
ich bin auch stolzer Besitzer eines solchen China-Böllers
Ich habe (leider) auch schon Android 2.3 drauf, ein absolut nacktes System, ohne Market, Navigator usw.
Ich habe mich auch schon bei Efox beschwert das die ganzen Apps, die im Efox-Shop beworben sind, fehlen. Das einzige, was die mir bisher geschickt haben ist ein .jar file für GoogleMaps.
GPS-Empfang hab ich bisher noch gar keinen gehabt.
Z. Zt kämpfe ich mit der Installation des Markets, es hakt noch am GoogleApps.apk das noch nicht richtig rund läuft.
Wo hast Du denn neue Android-Software für das Handy herbekommen?
Hat Efox Dir die geschickt?
Ich würde versuchen, Efox zu fragen, wie man die neue SW installiert.
Ich habe die Erfahrung gemacht. dass die sich auch bemühen, wenn man denen nur oft genug auf den Keks geht...nach der ersten Anfrage kommt meist nur ne blöde Ausrede, aber wenn man weiter nervt gehts dann doch.
roverts said:
Hi, in the fastboot-mode you can select 'recovery'
The way you can do:
1. Turn off your phone
2. Press 'volume -' and the power button
your phone start in the FASTBOOT mode.
3. Press 'volume -' again, to select 'recovery', and press powerbutton to start.
I hope this will solve your problem.
Click to expand...
Click to collapse
i am new at this
I have a W801 which is the same Aiphone SK168
first, who has the original roms and as is the way instalr?
I have problems with the wifi, is looking for the ip and never connect not get the signal meter wiifi?
follow the steps to recovery and is in the startup screen Avans has some timeout or how late the recovery?
z4root not working the program to leave some in root mode to sk168?
I have another with imei 000000000000000 sk168, how to solve this?
would be helpful thanks
Android 2.3.4 for Aiphone SK168
Hi,
Maybe this is interesting for you guys.
The latest ROM for the SK168 is Android 2.3.4. and is rooted.
Running smoothly on my SK168 with hardware revision P7.
The ROM is also available for the P1 and P4 versions.
I also have USB and ADB drivers for this phone so you will have full access with Android SDK.
PM me if you want the software.
Cheers,
Mark
Please use the Q&A Forum for questions Thanks
Moving to Q&A
hi, ihave the sk168 phone and i want to "root" it, can you give me the drivers of this phone ?
Do you know if i can root it with SuperOneClick ??
Thank you,
BeppoLiber
markvlie said:
Hi,
Maybe this is interesting for you guys.
The latest ROM for the SK168 is Android 2.3.4. and is rooted.
Running smoothly on my SK168 with hardware revision P7.
The ROM is also available for the P1 and P4 versions.
I also have USB and ADB drivers for this phone so you will have full access with Android SDK.
PM me if you want the software.
Cheers,
Mark
Click to expand...
Click to collapse
Hi there,
Thank you for assist!
My W801 runs the 2.2.1 Android ver.
I'll be happy to get the fresh one from you.
Thank you in advance.
markvlie said:
Hi,
Maybe this is interesting for you guys.
The latest ROM for the SK168 is Android 2.3.4. and is rooted.
Running smoothly on my SK168 with hardware revision P7.
The ROM is also available for the P1 and P4 versions.
I also have USB and ADB drivers for this phone so you will have full access with Android SDK.
PM me if you want the software.
Cheers,
Mark
Click to expand...
Click to collapse
Dear Mark,
I've tried to send you the PM few times, but as I see, the PM service doesn't work at this forum.
Please, contact me by e-mail (richard.t.lh-at-gmail-dot-com) if it's possible about the fresh firmware for my sick W801.
Thank you in advance.
Regards...
Dear Mark,
I have just sent a PM to you, please reply it. The same wish to have the new firmware.
Regards,
Sandor
The hardware rev. P7 is no "recovery" is offered.
How can I update what was recommended that to undo? After this update does not touch is working. Please help me. Thx for advanced.
Tinemaya said:
The hardware rev. P7 is no "recovery" is offered.
How can I update what was recommended that to undo? After this update does not touch is working. Please help me. Thx for advanced.
Click to expand...
Click to collapse
I kept the old chinese tool that the vendor send to me to flash and install the old ROM (2.3.3).
If you want i can upload those tool, the ROM and the drivers (which are HTC ones, but works). There is a small tutorial too in chinese about how to use the tool.
Thanks for answer. I have try it with other versions, e.g. RUU-P7-Android-2.3-2.0.0.3 and RUU-P7-Android-2.3-2.0.0.1 and RUU-P7-Android-2.2-2.0.0.1. But nothing has help.
The Touchscreen does'nt work.
Please upload this ROM with drivers from HTC, i will try it with this. Thanks for advanced.
Tinemaya said:
Thanks for answer. I have try it with other versions, e.g. RUU-P7-Android-2.3-2.0.0.3 and RUU-P7-Android-2.3-2.0.0.1 and RUU-P7-Android-2.2-2.0.0.1. But nothing has help.
The Touchscreen does'nt work.
Please upload this ROM with drivers from HTC, i will try it with this. Thanks for advanced.
Click to expand...
Click to collapse
Here you go:
hxxp://www . mediafire . com/?s9d8uacb816s1a8
Change the xx to tt, and clear the white spaces... i cant post links yet.
Broken link W801
Doesn anyone can upload the ROM again? link is broken.
Also, do we know if someone with knowledges about tweaking ROMs would fix this one to OC it?
Related
SPL downgrade:
1. Copy the sspl-1.16-nike.exe to your phone
2. Run sspl-1.16-nike.exe from your phone
3. Flash one of this SPLs (SPL 1.12.0000 or SPL 1.16.0000)
4. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset or copy EnterBootloader.exe and Run it from your Phone!
Now your Phone have a Original SPL
OEM Roms can you found here!
really helpful in case I had to return it..cheers
will this work even after a hardspl...??
Hey!
Thanx for this useful guide!
Infact, I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site and can't find it also in your shared space...
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
no ... sorry!
Sorry, i have done this 3 times, but i cannot get rid of the "Niki Project"
Bootloader....
Iam thinking about selling this phone and want to go back to original....
Greets Frank
Tell it in German ... was ist dein Problem? Lies dir die Kaiser Threads durch ... es ist relativ easy!
Mein Problem: seit ich Tom´s ROM draufhatte, werde ich den Bootscreen
"Niki Project" ganz am Anfang nicht mehr los...
Da ich das Niki eventuell verkaufen möchte, wollte ich es gerne wieder original bekommen. Deine Tipps und Files mit dem Originalrom (danke dafür..)
habe ich schon dreimal probiert, ich scheitere immer an einem Verbindungsproblem (202). Nur mit dem Hardspl kann ich Dein ROM draufspielen, das "Niki Project" - Logo am Anfang des Bootens habe ich immer noch...
Gruss Frank
OK ... "SPL" ist was anderes ... das ist nur ein "Secound Programm Loader"!
Du suchst ein weg um die splash screens weg zu bekommen! Nimm irgend ein volles HTC Rom oder wart bis Montag und ich stells Online!
He want back his original splash screen ^_^
Is this the English one?
Is RUU_Nike_HTC_WWE_1.13.405.01_Radio_Nike_1.58.11.07_signed.exe the English version?
I flashed my Niki with Tom's awesome ROM and want to make sure I can revert back if needed. I bought my Niki unbranded with English WM6. I should've taken note of the original ROM and Radio versions, but unfortunately, I didnt.
Can you tell me if this is what I would need to flash in the event of warranty return?
ritterchen said:
Mein Problem: seit ich Tom´s ROM draufhatte, werde ich den Bootscreen
"Niki Project" ganz am Anfang nicht mehr los...
Da ich das Niki eventuell verkaufen möchte, wollte ich es gerne wieder original bekommen. Deine Tipps und Files mit dem Originalrom (danke dafür..)
habe ich schon dreimal probiert, ich scheitere immer an einem Verbindungsproblem (202). Nur mit dem Hardspl kann ich Dein ROM draufspielen, das "Niki Project" - Logo am Anfang des Bootens habe ich immer noch...
Gruss Frank
Click to expand...
Click to collapse
Schau mal in diesem Threat Post #7. Das müsste sein, was du suchst.
NetrunnerAT said:
SPL downgrade:
1. Copy the sspl-1.16-nike.exe to your phone
2. Run sspl-1.16-nike.exe from your phone
3. Flash one of this SPLs (SPL 1.12.0000 or SPL 1.16.0000)
4. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset or copy EnterBootloader.exe and Run it from your Phone!
Now your Phone have a Original SPL
OEM Roms can you found here!
Click to expand...
Click to collapse
hi,
I m trying to revert to original spl..but when I run on my phone the sspl-1.16-nike.exe I see on screen only loading and it stays like that without doing anything else.
I have tried waiting some time, but no changes.
I have followed the procedure both plugged to pc and unplugged and it is the same thing.
any advice?
thank you
if you see only loading ... the file sspl is stored on your sd card! this is wrong ... save it on your phone!
NetrunnerAT said:
if you see only loading ... the file sspl is stored on your sd card! this is wrong ... save it on your phone!
Click to expand...
Click to collapse
thanks a lot. all done
Can anyone give a unbranded original Nike german Rom ?
Not the dumped one, as i want back a fully original Niki for selling.....
Greetings Frank
full t-mobile rom
does anybody have a full t-mobile rom so i can get my bootscreen in t-mobile again it is needed for warrenty reasons thanks in advance
t-mobile ... austria?
t-mobile ... germany?
t-mobile ... netherlands?
what you need?
i have only the german version!
if you havent dump ... we doesnt have a rom for you ^^
How to revert back SPL and Rom for warrenty or return after doing a HardSPL?
That´s what i also would like to know....
Greetings Frank
help please!
needs original rom t-mobile germany.
during lace flash has occurred error on 16%, now constantly bootloader .
Habe ein HD 2 mit Tmobile Branding und möchte jetzt Android drauf machen.
Dazu habe ich gelesen sollte ich MAGLDR installieren.
Damit ich MAGLDR installieren kann muss ich mein SPL auf 1.42 bekommen ist immoment auf 1.6 iwas.
Wer kann mir mit dem scheiß weiterhelfen ich blick einfach nich mehr durch.
Und ist es ratsam eine Goldcart zu erstellen und wenn ja wie geht das?
Danke allen die mir weiterhelfen bin auch gerne bereit eine Gebühr zu bezahlen und mein Handy weiterzugeben damit mir jemand Android drauf macht.
Translation by Mod:
Have a HD 2 with Tmobile branding and would now make Android on it.
In addition I have read I should install MAGLDR.
So I can install MAGLDR do I get my SPL is at 1:42 iwas IMMOMENT to 1.6.
Who can help me with the **** I look just nothing around by.
And it is advisable to Goldcart create and if so how?
Thanks to all the help I am also willing to pay a fee and pass on my phone it gives me someone Android on it.
Go here and do a lot of reading....
http://forum.xda-developers.com/forumdisplay.php?f=735
I'm using Android on my HD2 with no problems at all...
Cheers,
Gehen Sie hier und wollen eine Menge zu lesen ....
http://forum.xda-developers.com/forumdisplay.php?f=735
Ich bin mit meiner HD2 mit überhaupt keine Probleme ... Android
Cheers,
my hd2 stuck after flash rom used MAGLDR
hi all, i have a problem after install MAGLDR to my HD2 rom, after reboot screen show HTC and no respon...i can't do anything cause usb not detect at pc..
before i flash my rom version is 3.14.707.3(04666) WWE, radio Version 2.15.50.14...and my spl is 1.42 before install MAGLDR...i need help to resolve this problem....plzzzzz
already pushed reset while holding volume down to enter into bootloader screen but can't flash cause my pc not detect usb, and fail to flash.....
the tricolor screen just show about 1 second...after that i connect usb...
no usb word show just serial only....
apat_hsb said:
no usb word show just serial only....
Click to expand...
Click to collapse
ok i already flash the rom...until loading the screen pop up show Error "Install \WINDOWS\PT_PhoneCompanion.CAB failed, code =0x80070005....
apat_hsb said:
ok i already flash the rom...until loading the screen pop up show Error "Install \WINDOWS\PT_PhoneCompanion.CAB failed, code =0x80070005....
Click to expand...
Click to collapse
You can always flash back to stock via SD Card then start over. Go to the HD2 Rom section for direction. Unlike Older HTC Devices, if you install a Rom via SD Card it will reset the phone back to stock. You will need to reapply SPL.
I NAND flashed my HD2 yesterday. I did have issues with it stickign to Waiting for USB after added MAGLDR. However, it finally took. I had to do as the thread in the HD2 section suggested and hook up the phone then open Activesync and uncheck ALLOW USB.
M_T_M said:
Go here and do a lot of reading....
http://forum.xda-developers.com/forumdisplay.php?f=735
I'm using Android on my HD2 with no problems at all...
Cheers,
Gehen Sie hier und wollen eine Menge zu lesen ....
http://forum.xda-developers.com/forumdisplay.php?f=735
Ich bin mit meiner HD2 mit überhaupt keine Probleme ... Android
Cheers,
Click to expand...
Click to collapse
Ja danke.
Aber leider weiß ich net nach was ich da suchen soll.
Kann mir denn nicht ijemand helfen??
SVNetus said:
Ja danke.
Aber leider weiß ich net nach was ich da suchen soll.
Kann mir denn nicht ijemand helfen??
Click to expand...
Click to collapse
oh! Sie meinen den NAND Android? Gehen Sie hier und dieses Video ansehen. Es erklärt alles, was Sie zum NAND installieren.
http://forum.xda-developers.com/showthread.php?t=894423
Cheers,
oh! you mean the NAND Android? Go here and watch this video. It explains everything you need to install the NAND.
http://forum.xda-developers.com/showthread.php?t=894423
Cheers,
htc hd2
hey guys.
i've got a problem.
i want to run Android on my hd2.
the problemen is that i have spl-3.03.000
i have tried to put hspl 2and3 but i get an error with the number00000005
and then wrong or bad spl.
i have tried to download another htc original ROM, but i still have the
spl 3.03.000.
can someone help me.
thx marc
Hallo,
I try to explain my problem in short:
Model: GT-i9100
I have Androidversion 2.3.3.
Sucsessfully rooted.....
Then it comes to Flash a customROM I screwed it (((
I followed a german videotutorial. The guy said I have to flash this here via ODIN
OK so far no Problems....after that I had Clockwork Recovery v4.0.1.4
I put the Avatar ROM +gapps on my SD-card (formatted it before)
Then I booted into ClockworkRecovery. I first made a "wipe data/factory reset", then "wipe cache partition", then I wiped the "Dalvik Cache"
Then I clicked on "install zip from sdcard" and searched for the "avatar-2.4b_343_20130323_i9100.zip"
.....nothing !!!
NO FILES FOUND !!!!
Then i rebooted the Device and now I'm stuck in a Bootloop.
Now then the device starts I first see the first logo (with the yellow sign, showing I have a customROM), then the second logo comes there the sound is played and you see the big S in midlle. You see this for a while and then it comes again, this repeats without an end.
Im able to boot in CWM and in ODIN-Mode.
What can I do ? PLZ tell me it is not bricked (((
Can someone tell me from now on what I have to do ? I just want to have the Avatar-ROM, but it seems, that I did something wrong, somethings missing in ma procedure :/
best regards
revnu
EDIT.: could it be, that I didn't see the ROM, because I tryed to flash a 4.2.2 version on my phone which has 2.3.3. is this a problem, do I have to Update to last official version first ?? PLZ I need help
EDIT2: I didn't made partitions to my sd-card. could that be the problem ?
First of all: Sorry that I'm replying this guy in german. He's in trouble and I guess it's easier for him to understand. If someone's interested, just tell me. I can easily translate my posts into English, too
Hallo erstmal. Also wie oben bereits gesagt, antworte ich dir jetzt einfach mal auf Deutsch, weil's bestimmt einfacher für dich ist
Das wichtigste vorweg: Ruhe bewahren. Ich kann dir vergewissern, dass dein Handy nicht kaputt ist. Temporär funktioniert es nicht, klar. Aber das kann man wieder hinbiegen. Du kommst noch in den Download-Modus (ODIN) [<- essentiell.. sobald das nicht mehr funktionieren sollte, wirds brenzlig] und sogar noch ins ClockworkMod. Von daher wird's kein großes Problem werden.
Ein paar kleine Tipps vorweg:
- Folge niemals Video-Anleitungen, die du irgendwo findest. Nur das, was auf xda-developers steht, kommt aus "erster Hand" und ist am hilfreichsten
- Mache, bevor du irgendetwas im CWM "wipest" ein Nandroid-Backup (Is jetz schon zu spät, klar.. aber auch nicht mehr so wichtig )
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Meld dich einfach nochmal und viel Erfolg wünscht,
experience7
PS: Und den Kopf reißt dir auch keiner ab, wenn du auf Deutsch antwortest. Klar, das hier ist ein englisches Forum und wir auch immer eins bleiben - aber wenn's schon ein Notfall ist
Re: [Q] HELP! Im Stuck in a Bootloop :(
experience7 said:
First of all: Sorry that I'm replying this guy in german. He's in trouble and I guess it's easier for him to understand. If someone's interested, just tell me. I can easily translate my posts into English, too
Hallo erstmal. Also wie oben bereits gesagt, antworte ich dir jetzt einfach mal auf Deutsch, weil's bestimmt einfacher für dich ist
Das wichtigste vorweg: Ruhe bewahren. Ich kann dir vergewissern, dass dein Handy nicht kaputt ist. Temporär funktioniert es nicht, klar. Aber das kann man wieder hinbiegen. Du kommst noch in den Download-Modus (ODIN) [<- essentiell.. sobald das nicht mehr funktionieren sollte, wirds brenzlig] und sogar noch ins ClockworkMod. Von daher wird's kein großes Problem werden.
Ein paar kleine Tipps vorweg:
- Folge niemals Video-Anleitungen, die du irgendwo findest. Nur das, was auf xda-developers steht, kommt aus "erster Hand" und ist am hilfreichsten
- Mache, bevor du irgendetwas im CWM "wipest" ein Nandroid-Backup (Is jetz schon zu spät, klar.. aber auch nicht mehr so wichtig )
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Meld dich einfach nochmal und viel Erfolg wünscht,
experience7
PS: Und den Kopf reißt dir auch keiner ab, wenn du auf Deutsch antwortest. Klar, das hier ist ein englisches Forum und wir auch immer eins bleiben - aber wenn's schon ein Notfall ist
Click to expand...
Click to collapse
The guys got another thread going about the same thing and hes posting there in English.
I dont know why hes posting links for other sites as it can pi55 people off since ALL he ever needs to know is on this forum.....it has the best people.
experience7 said:
Also du sagtest, dass du die .zip über "install zip from sdcard" installieren wolltest. Gibt es bei dir in CWM auch einen Punkt der "install zip from external sdcard" heißt? Denn wenn du die ROM auf eine externe Speicherkarte kopiert hast und die dann in dein Handy gesteckt hast, ist das der richtige Punkt für dich
Click to expand...
Click to collapse
mein english ist ok, lass uns lieber auf english, damit die hier nicht rummukken weißt ja wie das ist
------------------------------------
I dont have the "install zip from external sdcard" option in my CWM. I even tryed it from ALL menupoints and it says "can find file" (something like that)
thx 4 help
greetz revnu
EDIT: perhaps I should try another method....flashing a customROM via odin ? I have to admit, that I'm a little bit confused, because there are so many different tutorials about flashing
AW: [Q] HELP! Im Stuck in a Bootloop :(
theunderling said:
The guys got another thread going about the same thing and hes posting there in English.
Click to expand...
Click to collapse
Here on xda-developers? Oh, i didn't know this...
theunderling said:
I dont know why hes posting links for other sites as it can pi55 people off since ALL he ever needs to know is on this forum.....it has the best people.
Click to expand...
Click to collapse
Yeah, I have to agree. I am of the same opinion and already told him in german.
revnu said:
I dont have the "install zip from external sdcard" option in my CWM. I even tryed it from ALL menupoints and it says "can find file" (something like that)
Click to expand...
Click to collapse
You still didn't answer my question where you copied the file to. Internal storage or external, removable card?
revnu said:
EDIT: perhaps I should try another method....flashing a customROM via odin ? I have to admit, that I'm a little bit confused, because there are so many different tutorials about flashing
Click to expand...
Click to collapse
I guess this will be the fastest solution. Or since you already have the ROM on your internal or external storage, it's just fine to flash Siyah (for example). It will definitely recognize internal as well as external storage.
Re: [Q] HELP! Im Stuck in a Bootloop :(
Which version of gapps did you flashed? It could conflict with the rom u installed if it's not the right version.
Sent from my GT-I9100 using xda premium
Re: [Q] HELP! Im Stuck in a Bootloop :(
Experience, in the other thread they think he has got stock recovery, not cwm.
This is way better than TV *makes popcorn*
AW: [Q] HELP! Im Stuck in a Bootloop :(
Yeah you're right :'D Thanks for the clarification.. now I'm confused and out.. so much luck solving your issues
Re: [Q] HELP! Im Stuck in a Bootloop :(
Please add [SOLVED] to the title of ur post, as you have got Avatar ROM running.
"To err is human, to forgive is divine"
Sent from my SGS II
Hallo,
my Problem is SOLVED !!
What I did:
first flashed german STOCK ROM v4.0.4 via Odin.
Then I used the signed kernel with CWM6 integrated from Philz.....used the stock recovery mode.
Then I flashed the AVATAR-Rom from CWM
HAPPY HAPPY JOY JOY !!!
sry 4 any stress I made.
@mods:
my treads can be deleted if you dont see any worth for others with same problems. I think so, and apoligize
best regards
revnu
revnu said:
sry 4 any stress I made.
Click to expand...
Click to collapse
I think u did quite the opposite actually.. stress relief...
"To err is human, to forgive is divine"
Sent from my SGS II
Hallo! Wie oben beschrieben hab ich folgendes Problem.
Ich hab mit Odin ein Update der Firmware von 4.04 auf 4.3 gemacht. Nach dem Update hat das Gerät noch ein paar updates OTA gemacht und abschliesend einen neustart gemacht.
Nun zu meinem Problem: Ich kann mich nicht im netz Registrieren.,
Ich hab es mit mehreren simkarten versucht jedoch erfolglos.
Hab das Gerät komplett gewiped (cache und Factory reset) brachte aber leider keine besserung.
Was nun!? Kann mir im Raum Wien evt jemand Helfen mein G3 wieder gangbar zu machen?
Wäre schade wenns ein Briefbeschwerer wäre.
Grüße Peter
Hello! I have the following Problem. I updatet my Phone from android 4.04 to android 4.3-
Imei is Correct but i canz make Phone calls.
I tried to wipe the cache and make a factory reset but nothing helps.
Had someone a clue?
Greetings from Vienna
Peter
gramurspel said:
Hallo! Wie oben beschrieben hab ich folgendes Problem.
Ich hab mit Odin ein Update der Firmware von 4.04 auf 4.3 gemacht. Nach dem Update hat das Gerät noch ein paar updates OTA gemacht und abschliesend einen neustart gemacht.
Nun zu meinem Problem: Ich kann mich nicht im netz Registrieren.,
Ich hab es mit mehreren simkarten versucht jedoch erfolglos.
Hab das Gerät komplett gewiped (cache und Factory reset) brachte aber leider keine besserung.
Was nun!? Kann mir im Raum Wien evt jemand Helfen mein G3 wieder gangbar zu machen?
Wäre schade wenns ein Briefbeschwerer wäre.
Grüße Peter
Hello! I have the following Problem. I updatet my Phone from android 4.04 to android 4.3-
Imei is Correct but i canz make Phone calls.
I tried to wipe the cache and make a factory reset but nothing helps.
Had someone a clue?
Greetings from Vienna
Peter
Click to expand...
Click to collapse
100s of identical post'syou need a patched modem and kernel look and you shall find.
THAT was helpfull!
tallman43 said:
100s of identical post'syou need a patched modem and kernel look and you shall find.
Click to expand...
Click to collapse
Your message was VERRy helpfull. Everyone can compile operating systems and so ones.
you must be a genius.
You dont find it necessery to help other people who dont understand that peace of ****.
gramurspel said:
Your message was VERRy helpfull. Everyone can compile operating systems and so ones.
you must be a genius.
You dont find it necessery to help other people who dont understand that peace of ****.
Click to expand...
Click to collapse
It was helpful can't you read "patched modem and kernel" sorry if it appeared not being helpful but it was obvious from your post you had not done any research.One of Xda rules is before opening a thread is to at least do some research on the subject if you had you would have seen many many post's on the subject and how to solve unfortunately people are too lazy to look maybe these links will help sorry for not being helpful
>> http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 <<
>> http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289 <<
>> http://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 <<
>> https://drive.google.com/folderview...=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#lis <<
Hehe he's so angry.
Hi all,
1) I full wiped my phone
2) I flashed through odin a I9300XXUGNG3_I9300DBTGNG2_DBT 4.3 official samsung ROM downloaded from http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=DBT#firmware
3) I flash through odin TWRP 2.8
4) I flashed the kernel and modem from this thread http://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541
5) I wiped cache, dalvik cache and data and I reboot my GT-I9300
6) Try to make a call without any positive result
I don't know what do anymore...
Pheraps the problem could be some wrong reboot between the points?
Hello XDA-Com.
first of all my English is not very well i hope that you understaand my problem and solve it if its possible .
Dont ask me how but i have no OS on my HOX+.
I try CM11 but then i cant call or do something with my sim card.
So i try a new Rec. currently TWRP 2.8 and then i do something stupid.
I wipe everything so that i have nothing on my phone..
That means that i just can flash boot.img,or recovery but i cant put a ROM on my phone.
I also Buy a OTG Cable but the HOX+ wont recognize..
Also adb dont work.. my PC just detects fastboot..no matter what i do it shows me just fastboot...
I Try new Drivers, Delete all drivers and install them again.
I try universal drivers, i try to Push and sideload.
Nothing helps..Just Fastboot works.. i try it on another PC.
But adb wont find the device.
I also installed everything on Android SDK.
So i dont know how i put a ROM on my HOX+..
Unlocked
Rec. TWRP 2.8
Hboot 1.72.0000
S-Off
Radio-3.1204.171.33
Deutsch:
Da ich auf deutsch mich besser ausdrücken kann schreib ich das nochmal auf deutsch auf der Hoffnung das mir jemand helfen kann..
Also ich hab mein HOX+ flashen wollen mit der CM 11.
Leider ging dann meine Sim Karte nicht und ich hatte kein netz.
Dann wollte ich eine neue ROM istallieren lief alles gut,Recovery geflasht boot.img auch dann ins recovery rein dann ist mir was dummes passiert..
Dummerweiße hab ich alles auf dem HOX+ gelöscht..
Also alles gewiped..
Ob USB Debugging an ist kann ich nun nicht versichern da ich kein OS drauf habe.
Nun kann ich keine ROM auf das handy aufspielen..
ADB wird das Gerät nicht erkannt.
nur im Fastboot erkennt der PC das HOX+
Kann nurnoch Recoverys neu flashen oder boot.img..
Probierte methoden:
Universale adb treiber,
Treiber alle neu runtergeladen,
OTG Kabel gekauft (wird aber genauso nicht erkannt?!?)
Anderen PC von nem KOllegen getestet, wird er auchnicht erkannt.:crying:
Hoffentlich kann mir einer helfen
cmon.. can noone help me
Twrp 2.8 has mtp support (mount -> enable mtp)
Adb sideload could need up to 5min to recognize the device
it aint able to mount i dont know why..?
and i wait 15 mins for adb sidelload and still device not found..
Smoketorious said:
it aint able to mount i dont know why..?
and i wait 15 mins for adb sidelload and still device not found..
Click to expand...
Click to collapse
Because you need to probably install htc sync then uninstall it but keep the drivers on the computer...MTP 100% works otherwise I wouldn't have green-lit the build
i must enabel MTP? But nothing happens,
I install HTC sync manager and the drivers..
My HOX+ wont recognize from my pc i dont know why...
Smoketorious said:
i must enabel MTP? But nothing happens,
I install HTC sync manager and the drivers..
My HOX+ wont recognize from my pc i dont know why...
Click to expand...
Click to collapse
You need to uninstall HTC sync
already tryit.. but still nothing happens.. i dont know what the hell i should try..
Smoketorious said:
already tryit.. but still nothing happens.. i dont know what the hell i should try..
Click to expand...
Click to collapse
It should be detectable in TWRP 2.8.1.0, you have to go to Mounts and Storage screen, make sure MTP is enabled then it will show up in computer. From there you can copy your ROM inside.
By the way how do you S-OFF your device?
i try it just like you say.. but jesus i dont know why.. antoher ports, antorher cables, another PC..
maybe a install problem from my side ?
Your probably doing something completely wrong...I know for a fact CM + TWRP work fine