ok..so ive recently flash my X10i stock 2.1 eclair to Wolfbreak CM 6.1.3 v5
and im having problems regarding my Openvpn settings.
**cant check my config files
so what i did is to follow the old thread regarding the old openvpn settings for eclair and issue this following command on terminal emulator
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
busybox insmod /sdcard/openvpn/tun.ko
busybox cp /sdcard/openvpn/openvpn /system/xbin/openvpn
busybox cp /sdcard/openvpn/openvpn /system/xbin/tun.ko
chmod 700 /system/xbin/openvpn
mkdir /system/xbin/bb
busybox ln -s /system/bin/busybox /system/xbin/bb/ifconfig
busybox ln -s /system/bin/busybox /system/xbin/bb/route
busybox mount -o remount,rw /dev/block/mtdblock2 /system
busybox cp /sdcard/openvpn/chargemon /system/bin/chargemon
busybox cp /sdcard/openvpn/busybox /system/bin/busybox
reboot
Click to expand...
Click to collapse
then my X10i will reboot and will start acting up. Force close keeps on popping and the device will automatically restart.
ive used those command when i used 2.1 eclair before and everything is working fine.
if anyone could enlighten me about this will be a great help.
also if you need other info, you can pm me or reply to my post.
this is my old working settings when i used eclair.
1.rooting my phone
2.install busy box
3.install terminal emulator
4.install openvpn application
5.install openvpn settings
6. issue this command in terminal
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
busybox insmod /sdcard/openvpn/tun.ko
busybox cp /sdcard/openvpn/openvpn /system/xbin/openvpn
busybox cp /sdcard/openvpn/openvpn /system/xbin/tun.ko
chmod 700 /system/xbin/openvpn
mkdir /system/xbin/bb
busybox ln -s /system/bin/busybox /system/xbin/bb/ifconfig
busybox ln -s /system/bin/busybox /system/xbin/bb/route
busybox mount -o remount,rw /dev/block/mtdblock2 /system
busybox cp /sdcard/openvpn/chargemon /system/bin/chargemon
busybox cp /sdcard/openvpn/busybox /system/bin/busybox
reboot
Click to expand...
Click to collapse
7.open the config file and wait for it to connect.
but those above mention steps doesnt work anymore in 2.2 froyo cm 6.1.3 of wolfbreak
tried it and my phone starts acting up.
reflash again, this time openvpn settings is the only application i installed because as far as i know, wolfbreak custom rom is already been rooted and includes busy box and openvpn application but no luck..
help please.
Hi There!
I think you've followed my old thread so i've made this very same codes work on every Froyo Modded ROM... Wolfbreak already have the openvpn binary installed in /system/xbin so you'll have to do 1 extra step.
1.- Open Terminal Emulator and issue this comand
Code:
rm -r /system/xbin/openvpn
mkdir /system/xbin/bb
ln -s /system/bin/busybox /system/xbin/bb/ifconfig
ln -s /system/bin/busybox /system/xbin/bb/route
cp /sdcard/openvpn/tun.ko /system/lib/modules/tun.ko
chmod 644 /system/lib/modules/tun.ko
2.- Download OpenVPN installer from Market (Free)
3.- Click on Install and choose the following options and you'll see two screens:
3.1 - In the first one choose "/system/xbin"
3.2 - In the Second one choose "System/xbin/bb"
4.- Go to OpenVPN settings and go to Advanced>TUN module Settings>Path to tun module> This should be /system/lib/modules/tun.ko
5.- Choose your OpenVPN configuration and you'll be done.
Report back if this helps... At least i've test it in the following ROMS:
* Trip's MIUI Roms
* Wolf's CM Roms (all Variants)
* Zdizihu's Free X10
* Jerpelea's CM 7 GB Roms
thanks mate for the reply,
anyway, i somehow manage to fix the above mention problem and somehow got my config file to get connected using the above post.
but everytime it get connected, a lot of errors occur.
1.force closed.... .....
2.linux....error....... .....fork error...
i cant remember the whole error message because it only pops up for a bit.
tried to reflash twice but to no avail, same results hapen.
so i gave up and flash back to 2.1 kx10 aosp and everything is working again..
Related
Hi,
since a few days I have my first andriod mobile the HTC Hero. I have rooted it and everything works fine.
However, I found several interesting images for the G1 (JesusFreke or CyanogenMOD and so on). I suppose that they will not run on the HTC Hero :-( (yet). Sombody know if there is someone working on it? A google search is not that easy because the most roms are based on the HTC Hero sence and so you can easy find 100 hits with hero but all roms are not for the hero itself.
Does somebody have busybox running on the hero? I searched for a while but found nothing Hero specific. My first try to use a exiting manual for G1 did not work without problems. The most manuals are old and suggest to use a custom rom which include busybox.
Maybe someone has a hint for me
I want to test debian but the istaller use cp and so on. So busybox is a good starting point.
Cheers
Visios
download the attachment (busybox taken from cyanogen's rom), extract busybox and copy it to sdcard, then (if you have root):
Code:
adb shell
su
mount -o remount,rw /dev/block/mtdblock3 /system
dd if=/sdcard/busybox of=/system/bin/busybox
chmod 4755 /system/bin/busybox
mount -o remount,ro /dev/block/mtdblock3 /system
enlightener said:
download the attachment (busybox taken from cyanogen's rom), extract busybox and copy it to sdcard, then (if you have root):
Code:
adb shell
su
mount -o remount,rw /dev/block/mtdblock3 /system
dd if=/sdcard/busybox of=/system/bin/busybox
chmod 4755 /system/bin/busybox
mount -o remount,ro /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
tx for your info and the extracted busybox bin. It worked without any problem.
Do you have tried to use busybox install and export the path ?
enlightener said:
download the attachment (busybox taken from cyanogen's rom), extract busybox and copy it to sdcard, then (if you have root):
Code:
adb shell
su
mount -o remount,rw /dev/block/mtdblock3 /system
dd if=/sdcard/busybox of=/system/bin/busybox
chmod 4755 /system/bin/busybox
mount -o remount,ro /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
when i type adb shell it says
adb permission denied..
Help please
Yeah, I could google it but I'll just ask here instead, busybox - what's it good for?
It provides a lot of the standard Linux/Unix utilities - such as cp, rm, df, ls, ps, grep, etc. The toolbox program provided in the HTC ROM is a "crippled" replacement for busybox and doesn't have some of the functionality. For example, Market Enabler doesn't work with the stock ROM because toolbox doesn't provide the grep utility.
BlueHawk said:
It provides a lot of the standard Linux/Unix utilities - such as cp, rm, df, ls, ps, grep, etc. The toolbox program provided in the HTC ROM is a "crippled" replacement for busybox and doesn't have some of the functionality. For example, Market Enabler doesn't work with the stock ROM because toolbox doesn't provide the grep utility.
Click to expand...
Click to collapse
Oh, I see. Well explained, sir!
Busybox 1.15.3 for android for anyone interrested:
Code:
[URL="http://www.mediafire.com/?wcknmnhtin0"]http://www.mediafire.com/?wcknmnhtin0[/URL]
Does anybody know what version of Busybox is in the original post?
And if I want to upgrade, should I just follow the instructions over again with the newer version?
enlightener said:
download the attachment (busybox taken from cyanogen's rom), extract busybox and copy it to sdcard, then (if you have root):
Code:
adb shell
su
mount -o remount,rw /dev/block/mtdblock3 /system
dd if=/sdcard/busybox of=/system/bin/busybox
chmod 4755 /system/bin/busybox
mount -o remount,ro /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
Sorry for the newb question but... where do I type this stuff?
jpmi23 said:
Sorry for the newb question but... where do I type this stuff?
Click to expand...
Click to collapse
on a command line on your pc. this is not the right place to start for you, get a guide on how to setup adb on your pc first.
Wow. "abd". That's a new term now isn't it.
Ok. I'll skip it. Just looking to control my Samsung Moment on my PC like I was able to with my WM phones.
I'll keep looking around. Thanks for the help.
Hey guys,
I was following this instruction here:
http://nexusonehacks.net/android-hacks/droid-hack-how-to-install-thai-font-on-droid/
hoping to install Thai fonts to my X10i, but having trouble installing Busybox. I was told to put the busybox file into the root folder of my SDcard...is that /sdcard/...?
I did the following commands on Terminal Emulator:
Type each line and press the enter key.
$ su
# mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
# mkdir /data/busybox
# cat /sdcard/busybox > /data/busybox/busybox
# chmod 755 /data/busybox/busybox
# mkdir /data/local
# cd /data/busybox
# ./busybox –-install
# cp /sdcard/fonts/* /system/fonts
And when I got to the busybox install, it says something like directory not found.....So I'm wondering whether I put the Busybox file in the right location in the first place...
Can somebody help me out? Greatly appreciate it!!
Search the marketplace for the busybox installer, it does it automatically.
Oh really? I did download Titanium Backup and use it to install Busybox. Is it the same thing?
Once I get it installed, can I just use "cp" in Terminal Emulator? How do I use it?
Yeah, if you can use Titanium Backup, then you have busybox installed.
I'm not sure about that, maybe someone else can jump in and assist.
Yes, once you've installed Titanium Backup, and used it to install busybox, you are ready to go. I didn't have to separately install busybox when I loaded Thai fonts into my phone.
if you installed titanum backup just press menu >problems >download busybox and it will be installed for you
Hello,
This is the my port of the Wildfire 2.1 Eclair Rom for the Mini.
I chose Eclair because the drivers will probably be easier to find like this, you can expect a 2.2 Sense rom to come once the 2.2 AOSP is done.
[Download v0.2a Here]
[Download v0.2b Update]
Flash them is this order.
The Work's
Apps2SD
ADB
Booting
Display
xRecovery
Touch
SD-Card
OpenGL
Ext4 for Apps2SD
OMX (proper video playback)
Sound
The Won't 's
Charging [It says it's charging but it's not!]
GSM/3G
WiFi
USB mounting
Bluetooth
LED Flash & Light
Camera
YouTube Video showing installation.
YouTube Video in high quality by maxaan
Developer Notes:
Developer Notes:
Any Dev interested for testing all my future releases for the mini?
I ask developers for help to try out finding how to get the drivers for the non-working hardware parts to work. Simply said, you need to copy drivers from the SE 2.1 build to this build and report if it worked and which files were used.
Changelog:
v0.2a is up! Prepared the system for future drivers, little faster, ext4 support for apps2sd. Also for the mini fixed xrecovery thanks to peetr_
v0.2 Alpha is up! Fixed a lot: SD, Touchscreen, xRecovery, OpenGL
v0.1 Technical Preview / Pre-Alpha released for developers.
dang you are using same device..
i did try same thing but with clean wildfire [didn't get very far tho] [becouse work on kitchen] ... will download this too and see...
Problems on boot.
Or better no boot at all.
I made a full wipe, flashed the .zip and then these commands:
PHP:
adb shell
cd /system/bin
/system/bin/chmod 755 busybox
./busybox --install -s /system/xbin
./busybox --install -s /system/bin
After that reboot and stuck on Sony Ericsson white letters.
tried the mount command too but still no luck
PS: Something weird though. Xrecovery still working on me!
DaRk_dOg said:
Problems on boot.
Or better no boot at all.
I made a full wipe, flashed the .zip and then these commands:
PHP:
adb shell
cd /system/bin
/system/bin/chmod 755 busybox
./busybox --install -s /system/xbin
./busybox --install -s /system/bin
After that reboot and stuck on Sony Ericsson white letters.
tried the mount command too but still no luck
PS: Something weird though. Xrecovery still working on me!
Click to expand...
Click to collapse
Thanks for the info! This means I have to rebuild the ramdisk to have it work on the x10 mini. Oh one thing I forgot to state is that this NEEDS an ext2 partition on the sdcard (apps2sd not removed yet) and that the first boot will take ages stuck on the bootscreen since it's copying all apps over.
Could you adb pull system/bin/chargemon, open the file in notepad and send the content to me? Of the installed rom, that is.
In the update.zip package there is both an chargemon and chargemon~ file left over from text editing it with Ubuntu. Problem is that I can't acces the file through Nautilus (Ubuntu's version of Windows Explorer)
Hi, i also tried your work and i have the the same state as DarkDog with xRecovery working.
Tried the "logcat" :
sh-3.2# /system/bin/chmod 755 /system/bin/busybox
/system/bin/chmod 755 /system/bin/busybox
Unable to chmod /system/bin/busybox: Read-only file system
sh-3.2# mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
sh-3.2# cd /system/bin
cd /system/bin
sh-3.2# /system/bin/chmod 755 busybox
/system/bin/chmod 755 busybox
sh-3.2# ./busybox --install -s /system/xbin
./busybox --install -s /system/xbin
sh-3.2# ./busybox --install -s /system/bin
./busybox --install -s /system/bin
sh-3.2# logcat
logcat
I/checkabortedflash( 1065): [110] Latest flash seems OK.
E/logwrapper( 1499): executing /system/xbin/busybox failed: Permission denied
I/logwrapper( 1493): /system/xbin/busybox terminated by exit(255)
Click to expand...
Click to collapse
Seems like something goes really wrong here....
Mby because the wrong ramdisk or something.
@peetr try to give the "mount" and "ls /system/xbin" commands, mby found something..
peetr_ said:
Hi, i also tried your work and i have the the same state as DarkDog with xRecovery working.
Tried the "logcat" :
Click to expand...
Click to collapse
Ah yes.. I'll update the commands, you need to
PHP:
adb shell
cd /system/xbin
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
/system/bin/chmod 755 busybox
cd /system/bin
/system/bin/chmod 755 busybox
./busybox --install -s /system/xbin
./busybox --install -s /system/bin
Can you see if that works?
Good job ! Up and running
Linpack - 2,3 MFLOPS
But looks nice.
peetr_ said:
Good job ! Up and running
Linpack - 2,3 MFLOPS
But looks nice.
Click to expand...
Click to collapse
Huh? You mean touchscreen works on the mini?!
Yes it works.
peetr_ said:
Yes it works.
Click to expand...
Click to collapse
That's odd, it doesn't on the Pro
u10a init.rc
Mikevhl
attached is the init.rc you requested, it is from u10a USA version. hope it helps. Thank you for for effort.
strykme said:
Mikevhl
attached is the init.rc you requested, it is from u10a USA version. hope it helps. Thank you for for effort.
Click to expand...
Click to collapse
Thanks, but I understand that it's booting now on the mini?
The commands that you have to run after installing are updated, would you mind giving it a try?
I think you can write in the first post, that its working on mini. And that we have to install busybox before leaving xrecovery.
But i must say again, it is too slow in this alpha version. Hope it can be faster in later versions.
peetr_ said:
I think you can write in the first post, that its working on mini. And that we have to install busybox before leaving xrecovery.
But i must say again, it is too slow in this alpha version. Hope it can be faster in later versions.
Click to expand...
Click to collapse
Try out the Alpha please, should be a tad faster since I've fixed openGL
Well i wait for some updates, then I'm gonna try it
Nice work tho, keep it up !
can you please remove the app2sd so i am able to test it because right now i have an ext3 on my sd card and i am missing my adapter!!! Or at least someone provide a method convert to ext2 mounted from the device e.g. from ubuntu?? Can i do it this way???
First thing, you have to change chargemon to event1 for mini
Hi guys,
Here is a tutorial to get OpenVPN working on a p500 with mik's 6.5.7 (latest stable release). This works.
how to get OpenVPN configured, running, and connected:
required: config files from your openvpn server (eg.. ca.crt, ca.key, etc) located in /sdcard/openvpn
Create symlinks to ifconfig and route
open SSHdroid (or adb, terminal emulator, etc.)
type this:
su (press enter adn this will prompt for root access just grant)
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
chmod 700 /system/xbin/openvpn
mkdir /system/xbin/bb
busybox ln -s /system/xbin/busybox /system/xbin/bb/ifconfig
busybox ln -s /system/xbin/busybox /system/xbin/bb/route
reboot
Download OpenVPN Installer from the Market
when installing choose:
/system/xbin
and then
/system/xbin/bb
Copy your client config files from your VPN server to:
/sdcard/openvpn
then
cd /sdcard/openvpn
chmod 755 *
Download and install OpenVPN Settings from the Market
press Menu button
>Advanced
>TUN module settings
Set "Load module using" to insmod.
Set "Path to tun module" to /system/lib/modules/tun.ko
Reboot your phone and open OpenVPN Settings.
checkbox the 1st option to turn on OpenVPN
checkbox the second option to connect
Bump
Any help? I am so close!
[SOLVED]
Turns out that I had to add this rule in iptables on my server. Although openvpn was working from my pc (on limited ports) it would not work at all with my phone. The fix was:
iptables -t nat -A POSTROUTING -j SNAT --to-source [ip of server]
sed -i 's/eth0/venet0/g' /etc/sysconfig/iptables
/etc/init.d/iptables save
Hi,
I've got a Probox2 AndroidTV box on Marshmallow.
I would like to mount a remote NFS share into it's filesystem, so that the share is accessible to all apps (I've disabled mountspace in SuperSU).
I can do this via terminal or SSH using the following 3 lines
Code:
su busybox mkdir -p /mnt/nfs/roms
su busybox chmod 777 /mnt/nfs
su --mount-master -c busybox mount -o rw,nolock,hard,intr,vers=3 -t nfs x.x.x.x:/mnt/Roms /mnt/nfs/roms
This works well and my Apps can find the network shares.
However I would like this be mounted automatically at every boot...
I've tried ScriptManager with this as the script
Code:
#!/system//bin/sh
su busybox mkdir -p /mnt/nfs/roms
su busybox chmod 777 /mnt/nfs
su --mount-master -c busybox mount -o rw,nolock,hard,intr,vers=3 -t nfs x.x.x.x:/mnt/Roms /mnt/nfs/roms
The script doesn't work from script manager or cli. (I know nothing about scripting).
I'm unsure how to go about getting it run/work....
Please could someone explain to me how to get those lines to run after boot or how to fix the script...
Thanks