Anyone have any tips for removing the battery cover? I keep my nails short and can't jam one in there so I have a hard time removing it. I've also tried putting a penny in the slot and prying it open that way.
I use both of my thumbs. One to initially start prying and the other one to go along and work it free.
A dime does the trick too.
Sent from my ADR6400L using Tapatalk
The battery cover is one thing I hate about the TB. Why not make it an easy slide-off like the Nexus. The N1 had great build quality and the battery cover was not a PITA to remove.
bmcclure937 said:
The battery cover is one thing I hate about the TB. Why not make it an easy slide-off like the Nexus. The N1 had great build quality and the battery cover was not a PITA to remove.
Click to expand...
Click to collapse
Yep I always hated the battery cover. One thing I liked about my Blackberry. Very nice battery door
What works for me is to take an use one finger to pry open the slot at the top and take the other hand an take my thumb and press down into the center of the cover where it says htc, that seems to make the cover spread open alittle for me anyway.
Careful removing cover, I got a little overzealous and cracked my stock cover on the first day! That sucks!!!
But in the end, I still don't see a need to remove the cover unless you are battery swapping all the time, but you should use the extended battery for that...
I got tired of it being insanely hard to remove, so i slightly filed down each of the tabs on the cover, it comes off twice as easy now. Be careful not to shave off too much if you do this or it wont stay on.
I did a little bit at a time, and tried it out after each to make sure it still grabbed enough.
That cover is a pain and I always feel like I am going to break it when trying to remove it. The two thumbs method has worked for me so far.
Here's a solutiuon and you won't damage the plastic
Use one of those little plastic grocery store cards that most of us have on our key rings. Some of them are even tapered along the edges, those work better.
Pinky
Grow your pinky nail out like a gangster but keep the others manicured...
I'm sorry but I just have to bump this. I'm ruining the finish on my TB because this cover is so insanely hard to remove that I have to pry the damn thing off with a screwdriver or key. In fact, I cant actually just wedge it in there, because the necessary force would send the phone flying against the wall. Instead I have to jam it in there, then twist it a full 180 degrees completley bending the case and scratching the lip all to hell before it finally pops up.
There simply has to be a better way! Anything that requires torque is GOING to cause scratches!
Wow, talk about man handling! Its hard, but not that hard.
Sent from my TBolt using my f***king thumbs...
It's a good fit.
Sent from my ADR6400L using XDA Premium App
Never had a problem with it.... Y don't u guys just grow a pair and stop crying...
Sent from my bamf 3.0 Thunderbolt using XDA Premium App
I just use my fingernail . My Inc was harder to open than my TBolt .
Sent from my Verizon 4GLTE HTC Thunderbolt
There is a little notch in the top. Just hold the phone with one hand and dig your thumbnail with your other hand in there. Once it pops off a little ways the rest is cake. Just pull it off.
Sent from my HTC Thunderbolt
Middle finger in the hole even with my tiny nail and thumb at the center of the plate. equal amount of pressure and it will pop right off.
I use a bottle opener on my key chain, pops right off
Sent from my ADR6400L using Tapatalk
Related
I would like to carry replacement batteries with me and I was wondering what is the best way to remove the back cover? I see that there are two areas to be concerned about...power button and camera area. Any thoughts?
I run my finger nail around the edge of the battery cover until all the clips are undone then it just falls off basically.
Sent from my E3D using Tapatalk
That's what I do also...a friend took the back off and his power switch took a snap and now it is hard to power on and off. On the old EVO not a problem. The new back looks kinda sensitive. I will keep on doing it like this. Somebody else suggested get the bottom loose and open it like a book..
Thanks for the input.
I hate the back cover on these phones, one thing i wish HTC would work on.
Sent from my PG86100 using Tapatalk
Bummer, I've seen no problems with it. I just pop it up from the slot on the bottom, jiggle lightly and it just falls off. IMO it's far superior to the noisy mal-fitting cover from the DINC, but then again that's the only phone I ever had a cover issue with.
What i hope will happen is that the back will eventualy just easily come off from constant opening. I had a couple of batteries on my old EVO and charge the batteries on the wall..never had problems and was always powered up. When i get home tonight..I am really going to take a look at the back to see if I could make life easier. I always have a hard cover on it and the back popping off is no big deal. But the design on of the power switch and a removable battery makes the current design a Achilles tendon on a powerhouse of a phone. The extended batteries currently out are just butt ugly and would prefer a slimmer look.
Mayonesa said:
I hate the back cover on these phones, one thing i wish HTC would work on.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Why? It fits good, doesn't make noise, and looks nice. Sure its kinda hard to get off but that's a plus in my book!
Sent from my E3D using Tapatalk
Start on the side opposite of the camera button. And just pry along.
Sent from my PG86100 using XDA Premium App
The back plate makes creaky sounds all of the time is this normal or can it be fixed
Sent from my ADR6425LVW using xda premium
Slap some electrical tape under it in different spots until it doesn't creak any more.
fenguepay said:
The back plate makes creaky sounds all of the time is this normal or can it be fixed
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
cut some paper the size of the battery, and stick them between the battery and the case. Add/take away sheets of paper till the case still closes but the creak is gone. We did this on the droid bionic, did wonders for the terrible creak of the phone. I haven't had to much creak with the rezound, but been meaning to do this with the phone.
yeah, I notice that as well with my unit. It is a little annoying. I have to say while the phone is nice, the build quaility really needs a little better.
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Deron Baker said:
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Can you post or PM me a link to the "TPA edge-only" case? I couldn't find it on that site. Thanks!
nosympathy said:
cut some paper the size of the battery, and stick them between the battery and the case. Add/take away sheets of paper till the case still closes but the creak is gone. We did this on the droid bionic, did wonders for the terrible creak of the phone. I haven't had to much creak with the rezound, but been meaning to do this with the phone.
Click to expand...
Click to collapse
This! Just got a couple Post Its...folded them up and placed them on the back of the battery. Profit.
ogarlen said:
Can you post or PM me a link to the "TPA edge-only" case? I couldn't find it on that site. Thanks!
Click to expand...
Click to collapse
I use this one with my extended batteries, works super:
http://shop.htcpedia.com/htc-rezound-extended-battery-tpu-case-hard-rubber.html
Deron Baker said:
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I bought the extended battery and back and that TPA case that goes around the edges but leaves the back exposed does a great job of squeezing the back and phone together and eliminating the squeeks. I like the regular size battery but with the TPU case, I use the extended battery all the time.
solution is too buy a 3rd party case.
My original Rezound didnt creak, but my replacement one does a bit. I notice it most when I'm cleaning the screen, cause that seems to put the most pressure on it. Sticking a bandaid on the battery seems to have helped it a lot though..
i put a thin piece there to stop the creaks, which it did..it's funny though, now my rezound easily spins in circles on a table hahah..that THIN piece of paper was enough to bulge the middle of teh back cover out to make it spinny!
Don't forget that paper is an insulator. That's why homeless people use newspaper as a blanket. Your phone will retain more heat, longer with paper shoved inside it.
yeah, we voiced those concerns back wehn this topic came out like the week the phone came out haha..was always a problem..but most of us never really noticed any higher temps than normal..my phone never goes over like 42 degrees C, which is what, around 100 degrees F?
I'm pretty nit picky about my phone creaking and I've had a lot of time on my hands so recently I've given this topic way to much thought.....
The creaking is due to the plastic not fitting perfectly and the friction created when the battery door slightly moves around.
I sat down with a bottle cap, a q-tip, and a can of WD-40 (I know, I know, call me crazy if you must )
I filled up the bottle cap with WD-40 and dipped the q-tip in it. I carefully LIGHTLY applied it on all the connecting tabs on the battery door. Voila! Be careful to avoid all the antenna metal stuff so you don't mess up your reception.
Sent from my ADR6425LVW using XDA
I have bought the case a couple of days ago and was wondering if there is a easier way to open the case and does anyone open the case to replace the battery like me?
Thanks
Dude that case is definitely a beast. On nine the whole penny thing doesn't work all that well. I end up using a flathead screwdriver instead. Also now I just use my battery pack. I charge it on the go. Waaaaay easier than having something to pry it open with.
Sent from my SPH-D710 using Tapatalk 2
When your holding the phone in your hand lookin at it upright theres a little nitch on the BOTTKM LEFT SIDE of the case. Take either a dime or your finger nail to to pry it open from there. Thats how i always got mine off. I think theres also youtube videos
Sent from my SPH-D710 using XDA
How do we amaze owners keep the device looking amazing
Sent from my HTC_Amaze_4G using xda app-developers app
you mean flashing bad ass rom's... or exterior by using screen protectors and cases?
I try not to drop it in the dirt if that's what u mean..lol
Ninjistix said:
you mean flashing bad ass rom's... or exterior by using screen protectors and cases?
Click to expand...
Click to collapse
Meant like cleaning AMD stuff, wiping screen etc
Q
Sent from my HTC_Amaze_4G using xda app-developers app
filthygoat223996 said:
Meant like cleaning AMD stuff, wiping screen etc
Q
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Hey FilthyGoat I take my case off, remove battery and lightly air blow, wipe the edges there is always a little layer of dust there.
I do that ever couple weeks so it does not accumulate. I also use a LCD screen cleaner, no house hold cleaners on the screen.
Hope my method will give you some tips FilthyGoat .......your username makes me smile with this question you asked
CalicoJeb said:
Hey FilthyGoat I take my case off, remove battery and lightly air blow, wipe the edges there is always a little layer of dust there.
I do that ever couple weeks so it does not accumulate. I also use a LCDs screen cleaner, no house hold cleaners on the screen.
Hope my method will give you some tips FilthyGoat .......your username makes me smile with this question you asked
Click to expand...
Click to collapse
Indeed, thing is, filthy goats have a very hard time keeping anything clean
I go try hard some times and completely give the phone a wipe down but the screen becomes smudged very quick ... Maybe cuz I'm filthy? Who knows
Sent from my HTC_Amaze_4G using xda app-developers app
mine too, smudges happen very quick, doesen't take much in terms of greasy fingers. I have a couple eyeglass cloths around my desk at work and I give it a spray with the eyeglass solution and just wipe it down. Also, I change the screen protector every few months, and go through a few tpu cases a year. Mine still looks as new as the day I bought it.
the kinda of case and screen protector i'm using don't really leave smudges... the most ill have to worry about is dust gathering around the corners of the screen where the protector is.. but i just blow it off dust and wipe it whenever it looks dirty
Is eye glass cleaner harmful to the glass display?
Sent from my HTC_Amaze_4G using xda app-developers app
Has anybody noticed that dust collects on the inside of the little window for the front-facing camera? Or, am I the only one this has happened to? I have no idea how to clean it; I've tried shooting "canned air" into the back with the cover off, and into the earpiece. If anyone has any suggestions, I'd gladly listen. Thanks!
takingflight005 said:
Has anybody noticed that dust collects on the inside of the little window for the front-facing camera? Or, am I the only one this has happened to? I have no idea how to clean it; I've tried shooting "canned air" into the back with the cover off, and into the earpiece. If anyone has any suggestions, I'd gladly listen. Thanks!
Click to expand...
Click to collapse
Hasn't happened to me yet, but I'be only had the amaze for half a year so Idk
Possibly a design issue?
Sent from my HTC_Amaze_4G using xda app-developers app
i go naked!
I originally had a ballistic case for my phone but hate how bulky it was, and the phone is a heavy beast as it is. I really don't like screen protectors either, they either smudge too much, or distort the clarity of the screen. So I'm going totally naked now which can be a delicate operation, so I take the following steps to keep my phone clean.
1. Don't drop it. Duh. Most of the time dropping a phone without a case isn't the end of the world though, and I could live with a ding in the corner should it happen, better than living in fear and having a frumpy-ass case wrapped around it the other 99.9% of the time that I don't have poor coordination...
2. Never set the phone down on a hard surface unless very gently, this prevents scratching. If I do set my phone down I put my wallet under it, but most of the time my phone is either in my hand or in my front pocket.
3. Dedicate one pocket to you phone (you can carry your wallet there too it it's soft), and NOT your back pocket. I'm a lightweight guy and I shattered the screen on my Atrix by sitting on it when getting into my car, turned out it wasn't as strong as my iPhone's 3GS screen was, so I don't do this anymore. Sounds stupid but I've knowingly sat on my phone thousands of times without it ever breaking... I just really like my phone in my back pocket. So now I keep my phone in my front right pocket with the screen facing my leg; keys and spare change go in left pocket.
4. Carry a microfiber pouch on you--I use this to clean the screen and to clean my sunglasses, and I store my sunglasses in it when stowing them away. Most cheap-o sunglasses stores around here will sell you one for 2 or 3 dollars, the nice ones feel like micro-suede...
5. Keep your hands & ears clean, I won't detail how to clean you ears and trim your nails but you get the idea :laugh:
Dead skin and pocket debris are the main things to get stuck in the speaker grills so if you're super anal you could keep your phone in a soft case with a drawstring before putting it in your pocket but that's kinda dorky, at the end of the day it's just a phone and you're probably gonna replace it with a better one in due time anyways so I say go naked and enjoy...
I have had my Ultra Z since January. Zero problems, but this morning I removed my USB charger at work and a rubber gasket (see pic) fell out. Now the door does not close properly. I have the gasket and tried to work it back in but it would not go. There is a small tab and I cannot tell if it goes up (towards the screen) or down. I think I can get it back in with a toothpick or similar but want it to stay (and not lose it) and for it to re-seal the door properly. Not being able to close the USB door is a BIG deal to me.
I had been meaning to get a docking charger but bought some from China and they were crap. Guess I'll have to break down and get a real DK30.
The o-ring goes on the door.
Tab to back by the looks
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
mknewman said:
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Jammol said:
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Click to expand...
Click to collapse
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
mknewman said:
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
Click to expand...
Click to collapse
I don't know what part of the world you are in but you can check these out. Couple folks have bought them:
http://www.ebay.de/itm/Original-Son...zer_Ersatzteile_Werkzeuge&hash=item2339fdd95e
I say just replaced the entire cap with one of those and call it good. Mine is experiencing the same thing, tearing off little by little. I think that is where water might be getting into my phone, but I'll be replacing the phone soon anyways. Just not sure what to get yet.
I have not gotten mine wet yet other than rain in my pocket but the lines are much better with the cap on than removed, and I'd worry about the edge material getting pulled off the rest of the phone. I appreciate the ebay refrence and will try to find a US version. So is there a way to remove the old cap without breaking it off internally and having the tab rattling around inside?
I ordered a couple of the caps and a magnetic charger off thEbay US, but seller was in Spain so it will be a while. Crappy design trying to get rubber to adhere to plastic.
Does anyone know how to safely remove the old one? Just yank? slip something very thin in to try to get the tab to ride over the notch?
Thanks,
Marc
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Apply with a pin or paper clip I take it?
SÜPERUSER said:
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
mknewman said:
Apply with a pin or paper clip I take it?
Click to expand...
Click to collapse
mmm something like that I dunno really.. I've yet have to figure this out myself lol. Use your imagination! :laugh:
At my moms work when I was young they had superglue bottles from loctite with really tiny metal pipes attached on them I wonder what loctite model that is. They could be used to do any precision work!
So it's possible to get the new one in properly once I get the old one out? From this picture it appears the new tab should slide in but I'm worried if you have to tug hard to get the old one out.
SÜPERUSER said:
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
calm down...just pull on it. You won't break anything
edit: its no big deal to get the new one in
Great! Thanks, that's a relief. I'll let ya'll know how it goes when I get it. May buy a few extras too.
I got the replacement parts from thEbay tonight. Pulled on the old one and it came right out. Took 2-3 tries to get new one in. Tether was bunching up. Turns out if you hold it at about 45 regress it goes right in.
Thanks for the help everyone.
Sent from my C6833 using XDA Free mobile app
gutted!
I am so gutted i didn't see this thread before I sent my phone to Sony for warranty repair.
My gasket didn't fall off, it started to come unstuck so was hanging off and when closing the lid the gasket would unroll and the lid would open.
I sent it to Sony as I think this is there fault. The gasket should stay attached for the duration of the warranty.
They want to charge me £55 for repair, handling and shipping!! I have had my claim escalated and now they say 'upon further inspection the device is bent'!! They are willing to send it back free of charge should I not want to have it repaired...... But should I now expect the device they send back to me to bent when I know full well it was in near perfect condition when I sent to them?!?!
The bottom line is follow instructions from this thread. DO NOT send your phone to Sony.
Sony use 'authorised repair centres' so they don't even know what is going on with your device and the trust you put in Sony to give your device to a respected engineer is misplaced.