Related
How-TO Root the
HTC Slide
HTC Aria + See this Link > http://forum.xda-developers.com/showthread.php?t=708233
&
Nexus One
Works With ALL 2.1 HTC PHONE"S with 2e Recovery!
Must be able to See the Device From the ADB in recovery for it to work!
See this Thread if you Have a New Slide or Updated the OTA to version 1.35.531.1
http://forum.xda-developers.com/showthread.php?t=754669
If at anytime You have Trouble or Can't get my Method to work, Please see wesgarner's [Root] SimpleRoot v1.3 (Linux/Windows)
Link > http://forum.xda-developers.com/showthread.php?t=713347
Just use my Update.zip if you just want root only
Download This Package > Root.zip
*EDITED* 6/29/2010 Update Now Contains Su & Superuser.apk. Permission Fixed on SU / Sh as well
-Contains Dusty51 script for Partitioning the a2sd & Swap
-fstab install so swap will work
-Default partition table's are:
-Linux Swap @ 32mb
-ext2 a2sd partition @ 512mb
-Fat32 Partition is based on the size after the 2 above
How-to Use:
Once You load the Recovery via update.zip, Unplug & Plug the USB to make sure the Device is Seen..
- Open Command Prompt from Computer
- Adb shell
- sdparted
- Next Follow the Command, y = Y to confirm..
Note: Backup your SDCARD first, only thing should be on it is the update.zip then Follow the above to Format for a2sd support!
Click to expand...
Click to collapse
Stratis1978 said:
I've got root now and just wanted to repeat what made the difference for me (also posted pages back):
when you're ready to run recovery in the bootloader be sure to unplug the USB from your phone until 'HBOOT' not 'HBOOT USB PLUG' displays.
So basically you unplug the phone until 'HBOOT' appears, have 'RECOVERY' highlighted, and plug the phone in a moment before you select 'RECOVERY'.
The moment I did that I had 'recovery' displaying in my loop.
Continue with the directions...
Click to expand...
Click to collapse
How-TO Root the Slide
First!! - Go to Settings > Application > Development and turn on USB Debugging. This should save you headaches.
NOW… Power Off the Slide
Step 0.
Un-zip the Package you Downloaded
Step 1.
Place the Contents of "update.zip" & "ota.zip" & "loop" into your Android SDK Tools folder.
Step 2.
Open Command Prompt or Terminal and CD to the SDK/Tools Directory.
Step 3.
Power on the Slide into the bootloader by Holding Down ( Volume Down + Power Button )
Step 4.
Now run your loop file from the prompt (either type "loop" in windows or "./loop.sh" in a *nix like) ( ./ Is used For OSX )
Step 5.
Once your loop is running in your prompt, select Recovery from the bootloader menu.
Step 6.
When recovery loads, you should Have an Offline Device. You can use ctrl+c to stop your script & see.
If this doesn't happen, Power Off and try again..
Step 7.
Un-plug your USB cable from the back of your phone & Plug it back in for it to Detect ADB Correctly!!! This is an important step. At this point you can adb devices to see if you can see your device and that it is in recovery mode.
Step 8.
Hit Volume Up + Power button to Bring up the Selectable Menu
Select Update.zip from the menu. (This will fail, but we already know that! Select it anyway).
Step 9.
adb push ota.zip /sdcard/update.zip (*OSX users add a ./ in front of all terminal commands please.)
Step 11.
This is Very important!! Have this Command ready in your prompt before applying update.zip again!!
This is the Command, We do not Push this Yet adb push update.zip /sdcard
Click to expand...
Click to collapse
step 12.
Hit run update.zip, as soon as you see a Little Bar appear under the text, push Enter to execute the command in your prompt (adb push update.zip /sdcard )
Step 13.
In successful, you should see Clockwork Recovery & you Now have Su & Superuser.apk Installed! You can Now Reboot Your Phone into the OS to verify.
If unsuccessful, repeat steps 11 & 12.
Congrats.
Next Guide For Flashing the ENG-BUILD with Test-key Recovery http://forum.xda-developers.com/showthread.php?t=703076
Updating the Radio Once Everything Is Done http://forum.xda-developers.com/showthread.php?t=705064
Special Thanks to:
Paul O'Brien: > http://android.modaco.com/forum.html
Koushik K. Dutta: His ClockWorkMod Recovery can Be found here > http://www.clockworkmod.com/
&
http://unrevoked.com/ OTA Spoofing Method
&
ChiefzReloaded for Huge amount of Suggestion & Brain Storming.
GREAT JOB!
Thank you sir, for your diligence, and hard work! Let's get to work boys!!!
Tips: May want to be a little more clear on "SDK Directory". Some may think that you "must" have this directory, but all that is important to know is that you know the directory where the contents were placed... If that IS the case, then I'd mention that...
Also, might be important to mention the phone should already be plugged in, and should have prerequisite of ADB working...
Thaaaaaaank you! got some fun stuff to do right after work now
Re: How-TO * Root The Slide * *6/15/2010*
Thanks guys. You've made a lot of people happy.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
richierich118 said:
What is ADB i come from rooting g1 and i dont remember or know what it is i rooted my g1 when it first came out and every since then all i had to do is name file update then push. could u be alittle more clear for a retard like me I dont want to miss my phone up when i just got it today, I really want to get rid of some of the bloatware on it tho
Click to expand...
Click to collapse
ADB is part of the Android SDK, you'll need to download it and extract it to your PC before you can use it.
http://developer.android.com/sdk/index.html
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
android007 said:
My problem may be that I'm using a Mac, but I cannot get my Terminal to recognize the "loop" command. I've tried many things and it won't work properly just keeps giving me errors. I'm gonna keep trying though.
Click to expand...
Click to collapse
Loop is just a batch file (.bat). I don't know about Macs using batch files. All it's doing is looping the "adb devices" command to see if it detects the device.
fermunky said:
Having trouble at step 5. ADB works when the phone is powered on. However, when in Recovery, adb devices list is blank.
Other problems: is Step 8 really a step? It says to select Update.zip... is this just anecdotal, as in "Now we will select an update.zip"...?
And how are you "selecting" things in Recovery? My recovery simply has the phone with a triangle...
Click to expand...
Click to collapse
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
You Must boot into bootloader First!! Run Loop, Then to Recovery!
my computer doesn't find the device in recovery mode. Any advice on getting around this? adb works when phone is on.
eugene373 said:
You have to Repeat then... It Don't always work everytime!! That's why I said Repeat.. You have to Power Off, run loop & if you see now Devices then you have to Repeat again!!
Click to expand...
Click to collapse
Wow, cant believe I missed that order. May need to update the how to though... it says to run loop, then go to bootloader, then to recovery. You need to add a step after getting into bootloader of "Wait for device to be listed, then goto recovery"... or similar.
My error when trying to invoke the loop file:
: command not founde 1: :TOP
sdk/tools/loop: line 2: adb: command not found
sdk/tools/loop: line 3: GOTO: command not found
Click to expand...
Click to collapse
Sweeeet! Awesome job guys.
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Are there any roms for it yet?
android007 said:
My error when trying to invoke the loop file:
Click to expand...
Click to collapse
You have not added the tools directory to your PATH system variable. Explained on the SDK page. Also, you don't need to be in the /tools folder, just go to the folder you extracted the files to.
Eugene, I noticed while the loop was running, I chose recovery, and on one instance, I saw an offline device, but then subsequent loop commands, it stopped listing them. Also, it is still not clear what to do on Step 8. Most of us only see an image in recovery, no menus.
With no menus, anyone know how to reboot the phone in recovery other than removing the battery?
marvinp said:
On Mac replace the loop.bat with loop.sh and change the contents of the file to the following:
#!/bin/bash
while [ 1 ]
do
adb devices
done
On the command line, run "chmod 755 loop.sh" to give it execute permission. To run the file type "./loop.sh"
Click to expand...
Click to collapse
you think you can do quick little rewrite of the tutorial for us mac users
Okay guys, so here's a weird one.
My g-tablet was working great. Was running VEGAn-Tab Build, BETA 5.1.1, no reason to update it, because it did everything I needed. I finally had it to where I wanted it, then it all kind of started falling apart. Here's how.
I power it on and notice my home screen got all messed up for some reason (using launcher pro). All of the settings defaulted to the original. I tweaked it back to more or less how I wanted it, and when I had it back to normal, thought nothing better of it. Must have glitched out some how.
Then I notice a bunch of things starting to force close, specfically android market, amazon market, titanium backup, google services framework, launcher pro, etc. Odd thing is it would do it one at a time, but otherwise my tablet would carry on as normal.
I go ahead and restart the tablet, to see if that helps at all, and what do you know, the homescreen is messed up again! I thought launcher pro might have been the culprit, so I un-installed the app and rebooted... And launcher pro is still there.
I go ahead and delete it again and start deleting other apps, restarting the tablet, and no matter what I do, everything stays the same. time for some clockwork mod action. I go into clockwork mod, and try to do the factory reset option, thinking what the hey, I'll try anything right now. Hit it, mourn the loss of my user data, and reboot the system... and again, everything is still the same.
I hook up my tablet to the computer via usb, and it looks like I'm able to at least delete misc. files that way. But when I return to good old Tabatha (my nickname for Gtab) everything is stuck just the way it is.
Needless to say, it feels like I'm stuck in the twilight zone.
I know I should have researched it by now, but I'm going to finally look it up to see if I can recover with NVFlash (I know I know, very noobish of me, using strange roms and not knowing any of the basics).... but I'm increasingly worried I've got some kind of a hardware malfunction on my hands. Could it be the memory? The internal SD card?
Oddly enough, my tablet still functions... I can browse the web, hook it up to my computer, etc etc, but no matter what I do I can't alter the data I already have on my tablet. Can't delete things, can't change settings, update apps, etc. etc. Which makes it pretty much useless for what I wanted to use it for.
I finally realized what this is like. The movie groundhog day, and I'm stuck in the same day, over and over again.
Any help or input that might get me out of this mess would be greatly appreciated.
Phil: "I was in the Virgin Islands once. I met a girl. We ate lobster, drank piña coladas. At sunset, we made love like sea otters. *That* was a pretty good day. Why couldn't I get *that* day over, and over, and over..."
This is now the second time that I've seen this exact same problem. I was in the process of troubleshooting the original one when the user returned his gTablet for replacement. If you can stand the deja vu, read this thread.
Do not nvflash your tablet--nvflash cannot fix SD-card related problems. Read this post for why not.
Instead, do this for me: Reboot the gTablet, then open a Terminal, or, use adb and run this command:
Code:
$ dmesg > /mnt/sdcard/dmesg.txt
Attach that dmesg.txt which will contain messages from the kernel to your next post.
I'll check this thread in the evening.
rajeevvp said:
This is now the second time that I've seen this exact same problem. I was in the process of troubleshooting the original one when the user returned his gTablet for replacement. If you can stand the deja vu, read this thread.
Do not nvflash your tablet--nvflash cannot fix SD-card related problems. Read this post for why not.
Instead, do this for me: Reboot the gTablet, then open a Terminal, or, use adb and run this command:
Code:
$ dmesg > /mnt/sdcard/dmesg.txt
Attach that dmesg.txt which will contain messages from the kernel to your next post.
I'll check this thread in the evening.
Click to expand...
Click to collapse
Thanks for the direction, at least I know it isn't an isolated incident. It's 1:45 AM where I am right now, and I have to wake up for work in about 5 hours... So I probably won't be able to get in depth with the follow up on this stuff untill after work tomorrow night (so long as the wife doesn't hog the computer )
Again thanks for the quick response, I appreciate you pointing me into some sort of direction. Can't wait to try to get this sorted out!
Currently trying to figure out how to get ADB going.... pretty intimidating, but I'm trying. I got the Java JDK installed, installing the SDK, but can't find the "SDK Setup.exe" file or even a USB driver folder in the SDK directory. Got a good resource for getting ADB set up?
Save yourself some trouble. Got to http://www.knoppix.org/ and download the latest Knoppix live CD image.
Burn it, boot it, then use the adb executable from this post. For simple things like just running adb, you don't need the entire Android SDK.
Get me a dmesg while inside ClockworkMod:
Code:
$ [B]sudo ./adb shell dmesg > dmesg.txt[/B]
ADB commands documentation
Thanks, I'll try it out sometime this weekend!
Well, I really screwed myself now. I got the Linux distro loaded but still couldn't figure out how to get ADB to work. For whatever reason, When I boot from the DVD, I can't download the zip from within linux (get errors) and I could not open the ADB command by navigating to where I have it extracted in my hard drive. [Do I need to load the OS onto a flash drive instead?]
So I started messing with some stuff in clockwork mod. I apparently really goofed it, and I got a "Magic Value Mismatch" error everytime I tried to boot it up.
I looked up Magic Value Mismatch, and from there it pointed to using NVFlash to try to fix that problem. So tried that. After I flashed it, I thought for sure I finally had it back to stock, as the intro screen started to show the tap n tap logo... but i basically got stuck in a boot loop, tap n tap, then "n", then tap n tap, then "n", etc, until it dies.
I looked up this issue and apparently the key is to get into clockwork mod and do factory reset, reset cache, and partition the SD card to 2048 and 0, which I did... (per post #4 on this thread: http://www.slatedroid.com/topic/17501-helpstuck-in-bootloop/ ) but still no dice.
Not sure where to go from here, or if I can even get it to interface with ADB in its current state. Looks like I'm done for
Thanks for trying though
On second thought, I may have had a breakthrough, at least in getting ADB to see my tablet!!! Woohoo! It finally sees the device and has a serial number. Was following the device on this thread:
http://www.androidtablets.net/forum/viewsonic-gtablet-technical/5377-adb-g-tab-step-step.html
7. under the "[Google.NTx86]" section, paste the following:
Code:
;NVIDIA Tegra
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
%CompositeAdbInterface% = USB_Install, USB\VID_0955&PID_7100&MI_01
save the file and exit.
But I have a 64 bit machine, so I finally figured it out and plopped that into the 64 bit portion of the .inf file. DOH!
So now let me see what I can drum up through the previous commands above.... though the parameters have changed now to be sure... Due to my haste things may have taken a turn for the worse.
To recap, now my tablet is stuck in a boot loop after having done NV Flash, after having screwed up some settings in clockwork mod trying to fix a "Magic Value Mismatch" error.
Tried:
$ dmesg > /mnt/sdcard/dmesg.txt
I just run this in the cmd prompt at my platform-tools directory where the adb is correct?
All it says is, "The system cannot find the path specified."
Am I doing something wrong, or is my tablet that messed up?
Okay, this is slightly weird. So I was browsing around in clockwork mod, and lo and behold, the original zip flies for vegan tab are all STILL THERE. So I reloaded them... And My tablet zips back to exactly the way I had it before!
Only this time, so far no force closes. This looks way too good to be true after what I've been through. I'm going to try modifying some files and settings and restart my tablet to see what it does. I'm pretty sure I can't be out of the woods yet. Allthough it is 3:33 AM as this is happening... magic hour. I may be going insane.
EDIT: Nope, was definitely way too good to be true. All my data is as stuck as it was ever was. But at least now I can get into it again. But now we're back to square one. Lemme figure out this dmesg business and get back to you. X(
So I would try issuing the following exactly in the command line at the adb platform tools folder:
$ dmesg > /mnt/sdcard/dmesg.txt
Is that code supposed to be copy and paste in? I don't seem to be getting anything. I can do the following command and get the info to pop into the command interface:
adb shell dmesg
But I can't figure out how to save that to a text file. And you want me to do that while the g tablet is in recovery, correct?
FYI, trying to do it through Windows 7. Would that command only operate in the linux environment via knoppix?
Thanks
titobetlogs said:
I can do the following command and get the info to pop into the command interface:
adb shell dmesg
But I can't figure out how to save that to a text file.
Click to expand...
Click to collapse
Redirect the output to a file:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
titobetlogs said:
I got the Linux distro loaded but still couldn't figure out how to get ADB to work. For whatever reason, When I boot from the DVD, I can't download the zip from within linux (get errors) and I could not open the ADB command by navigating to where I have it extracted in my hard drive.
Click to expand...
Click to collapse
I suggested using Knoppix just because it is so easy to use adb in Linux. Broken-down steps for future reference:
1. Download and burn the latest Knoppix Live CD iso image. Check the downloaded file size. The .iso file should be ~700MB in size. Also, test the CD by booting it and then typing at the boot prompt: knoppix testcd
2. Boot Live CD and skip the creation of any partition or file to store user data. After all, we just want to run adb.
3. After Knoppix has booted into the desktop, run a browser, right click on the adb.zip attachment in this post, then select "Save Link As..." and save the zip file into /tmp.
4. Connect the gTablet to the PC via the USB cable.
5. Open a terminal window, then type in it:
Code:
hostpc$ [B]cd /tmp[/B] [I]Change to the dir. where adb.zip was saved[/I]
hostpc$ [B]unzip adb.zip[/B] [I]Unzip zip file[/I]
hostpc$ [B]ls -l adb[/B] [I]Check if the adb program was extracted OK[/I]
-rwx------ 1 rvp rvp 159620 Dec 1 22:23 adb
hostpc$ [B]chmod 555 adb[/B] [I]Make adb executable.[/I]
hostpc$ [B]sudo ./adb shell dmesg > dmesg.txt[/B]
Note 1: do not type in the shell prompt, 'hostpc$'. It is only there to show you what the screen should (roughly) look like.
Note 2: If adb says something like "device not found", just unplug the USB cable from the PC, wait a few moments, then re-plug the cable and re-run the adb command again.
6. Go back into the browser and attach the dmesg.txt file that is there in /tmp. You will have to tell the Noscript plugin to allow scripts from xda-developers to enable attachments. Right click on the page, then select the Noscript menu item, then choose "Temporarily allow xda-developers.com".
I thought for sure I finally had it back to stock, as the intro screen started to show the tap n tap logo... but i basically got stuck in a boot loop, tap n tap, then "n", then tap n tap, then "n", etc, until it dies.
Click to expand...
Click to collapse
I'm not surprised. If the files on the internal SD card cannot be modified then that boot loop behaviour is to be expected. Here's why:
Android requires certain partitions to exist on the system. These partitions can be either on the flash or on SD cards. The partitions are:
/system: This is where the binaries and system apps that come with the firmware are stored. This partition is usually mounted read-only to protect it. On the gTablet, this partition is on the 512MB built-in NAND flash chip.
/cache: As the name indicates, this is the partition used to speed up the execution of the Java apps. Temporary files are also created here. This partition too is on the built-in NAND flash chip.
/data: This is where user-downloaded apps are stored by default, and also where Android stores its system configuration data. This partition, on the gTablet, is on the internal SD card.
/sdcard: This is where user content like media files, books, and the apps moved to SD card are stored. This partition too is on the internal SD card.
The first 3 partitions are critical and Android won't come up without them being present (or, if there are any errors on them). Among these 3, only /system needs to be correctly populated (When you install a ROM, new stuff is copied here). The other 2 partitions, /data and /cache can be empty and the system will boot up fine--with defaults. In fact, when you select "wipe data/factory reset" in CWM, /cache and /data are re-formatted--effectively, wiped clean.
(There are 2 other important partitions on the NAND flash chip, but, these are not mounted because they don't contain a proper filesystem. You have to use special tools to create the contents of these 2 partitions.
The first of these is the "boot" partition. This one and "system" are re-written when you install a new ROM. The "boot" partition holds the Android Linux kernel. If you install a new kernel, only the "boot" partition is rewritten.
The second is the "recovery" partition. This contains a separate, and usually different (and safe), Linux kernel and a mini filesystem image. This is a fail-safe partition. Stock recovery and ClockworkMod sit here.)
In your case, nothing on the internal SD card can be modified, so the stuff in /data will still be from your old ROM. (nvflash also cannot modify SD card contents, as I mentioned before.) When the stock firmware boots up, it will find incompatible stuff in /data. Critical apps will then die. Android will restart them, they will die again. This is your boot loop.
Get me the dmesg output and then we'll run a few tests using CWM, but, judging from your previous posts, I don't think your internal SD card can be fixed. You have 2 options:
1. Return the tablet for a replacement.
2. If you can't return it, I can switch the internal and external SD cards on your ROM so that you can boot and use the system (almost) normally. But, this is a custom solution and you will need to have an external SD card in its slot always. Read through this thread.
Wow, you really know you're stuff! I'll see what I can get you later on in the day with regard to the dmesg, I'm currently still at work.
I had suspected a hardware error... bummer. I'll definitely be interested in seeing if I can just use the external micro sd slot to sub out for the internal sd card. I would at least like this thing to be functional again, though I suppose I'll never be able to try any of the honeycomb roms when those get past alpha. Oh well.
Do you know if this thing takes 32 gb micro sd cards? That would be pretty awesome, I at least wouldn't feel too limited on space.
By the way, thanks for all your help on this, I know I'm a huge noob. I greatly appreciate your patience and taking the time to break everything down for me. I have absolutely zero background in programming or anything computer related, though I do find this stuff extremely fascinating! If I could rewind the clock and study this stuff in school, I would do it in a heartbeat.
Again, thanks so much, can't thank you enough.
titobetlogs said:
I would at least like this thing to be functional again, though I suppose I'll never be able to try any of the honeycomb roms when those get past alpha. Oh well.
Click to expand...
Click to collapse
No, you should be able to run whatever ROM you want. I'll send you an installable zip file, in a few days, which should get you going again on Vegan-Tab, at least. You'll just need to remember to flash this zip file right after you've flashed the ROM (of your choice).
Right now, I don't know if I need one zip file for each kind of ROM in existence for the gTablet, or, if I can use some scripting and do the internal/external SD card switch using just a single installable zip file. I'll look into this on the weekend.
Do you know if this thing takes 32 gb micro sd cards?
Click to expand...
Click to collapse
Yes, it does.
By the way, thanks for all your help on this, I know I'm a huge noob...
Click to expand...
Click to collapse
I was a complete noob to Android myself back in April of this year. I've picked all of this up in just a few months. I'm pretty sure you can do it too, with a bit of poking around in the system. Of course, having a background in Unix/Linux helps a lot.
In your honor, below are some inspiring lyrics from the Karate Kid soundtrack:
You’re the best!
Around!
Nothing’s gonna ever keep you down
You’re the Best!
Around!
Nothing’s gonna ever keep you down
You’re the Best!
Around!
Nothing’s gonna ever keep you dow-ow-ow-ho-how-ho-own
INSPIRING GUITAR SOLO
Dude! you're embarrassing me -- I haven't send you the zip file yet... and, you haven't sent that dmesg output I wanted.
I know I've been stuck at work and family functions every day this week so far. Hopefully I'll get to it soon
Finally got to this! Here you go! Thanks again!
titobetlogs said:
Finally got to this! Here you go!
Click to expand...
Click to collapse
Can't see any problems in that dmesg output. Time for some tests on the internal SD card.
Boot into CWM, then run on PC (on Linux run: sudo ./adb shell):
Code:
C:\SOME\PATH> [B]adb shell[/B]
~ # [B]mount /dev/block/mmcblk3p1 /sdcard[/B] [I] Mount internal SD card partition[/I]
~ # [B]mkdir -p /sdcard/a/b/c[/B] [I]Make a directory tree[/I]
~ # [B]echo test > /sdcard/a/b/c/test.txt[/B] [I]Create a file[/I]
~ # [B]cat /sdcard/a/b/c/test.txt[/B] [I]Read it back again[/I]
test [I]Correct[/I]
~ # [B]echo 3 > /proc/sys/vm/drop_caches[/B] Flush kernel caches
~ # [B]cat /sdcard/a/b/c/test.txt[/B] Read it back again
test Correct
~ # [B]umount /sdcard[/B] [I]Unmount[/I]
~ # [B]mount /dev/block/mmcblk3p1 /sdcard[/B] [I]Remount /sdcard[/I]
~ # [B]cat /sdcard/a/b/c/test.txt[/B] [I]Reread file[/I]
test [I]You should see "test" here[/I]
~ # [B]umount /sdcard[/B]
You should see "test" after the kernel flush and the remount.
Next, reboot the tablet--back into CWM, then run the cat command again. `cat' should output "test", again, if the SD card is OK.
Here's a screen of the commands I entered and what I got back. Did I do anything wrong? Looks like something's a bit off.
I busted my Nook Tablet, tried a hundred different things to fix it, and was about to give up, when I finally found the solution. This is my story.
Seriously, though, this forum has been a huge help to me, and I'm posting this in the hope that it will help someone.
First, a little background on me. I'm a software developer, and I've even contributed a bit to the development of the gingerbread-based CM7 for the Droid X. So I know a bit about Android, but I don't pretend to understand everything, especially on the Nook Tablet. That will become clear as you read the rest of this because I can't really explain some of the things I experienced.
Using several of the helpful guides here, I successfully booted ClockwordMod Recovery off an SD card, rooted my tablet, and installed the CM7 alpha (http://forum.xda-developers.com/showthread.php?t=1481826). Since booting CWM off the SD worked so well, I didn't feel the need to install it internally. It was a beautiful thing.
By the way, in order to boot CWM from an SD card your tablet must be plugged into USB! At least that has been my experience, and it hasn't always been made 100% clear.
Then, I bought a new SD card - the one I used originally was borrowed from another device. The new one was 16 gig. I wanted to make sure I could still use it to boot into CWM, so I started out as before by writing the image found at
http://forum.xda-developers.com/showthread.php?t=1488035 to my SD card using Win32DiskImager.exe, which I acquired from http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14. But this repartitioned my 16 gig SD card down to 2 gig, so I used gparted in a Ubuntu VM to resize the partition to 16 gig.
I had all sorts of trouble getting into CWM with this new SD card. I don't really know why. Maybe the partition resizing was an issue, I'm not sure. But after lots of attempts, including plenty of failed boots, I started getting the dreaded black screen saying, "Please restart your device and try again. If you encounter the same issue, please contact customer service or visit: nook.com/tablet/support." I couldn't boot up CM7 anymore.
At this point I switched back to my previous SD card, plugged in the USB cable, and was thankfully able to boot into CWM. I tried the usually stuff. Reset data. Reinstalled CM7. Restored the backup of the factory ROM before I installed CM7. Nothing worked, I always got the "please restart" screen. Then I tried the 8 failed boots method to restore the factory state. It wouldn't go into the restore mode, just the same garbage again. At this point I figured I had really and truly bricked my device. This thread (http://forum.xda-developers.com/showthread.php?t=1397262) describing a similar problem didn't give my any confidence.
But since I could get into CWM, I realized I should at least be able to get into a shell via ADB and have a look around. Getting ADB working was a challenge, but eventually this post (http://forum.xda-developers.com/showthread.php?t=1363652), installing the USB driver attached to this one (http://forum.xda-developers.com/showthread.php?t=1354487), and adding the necessary line to adb_usb.ini (see the runmefirst.bat in the previous link) got me up and running with an adb shell.
I suspected my problem had something to do with triggering factory reset mode with so many failed boots, and somehow that factory reset mode was broken. With that in mind, I eventually stumbled upon this post (http://forum.xda-developers.com/showthread.php?t=1444630). I use CWM to mount /bootdata, logged in from my computer with "adb shell", and issued the dd commands the post described to reset the BootCnt and BCB files. I had to remount the bootdata partition read/write with "mount -o rw,remount /bootdata". If you do this once and still get a "Read-only file system" error when you do the dd command, just try the mount command again. I don't pretend to totally understand why that would be necessary, but it seemed to be necessary for me.
The first time I tried this and rebooted, I still got the same "Please restart your device error." It took me a couple of tries to figure out that I had to issue these commands and then remove the SD card before rebooting. It seemed as if booting from the SD card somehow re-poisoned the device so that even once I removed it I was still in a bad state.
Once I did this my device booted back into CM7. I shut it down, used the 8 failed boots method, and was able to reset to factory successfully. So apparently I was in some sort of badd BootCnt/BCB state, but it wasn't just the regular 8 failed boots state. I'd love to hear an explanation of why this might be, if anyone knows.
TL;DR: if you get a "Please restart your device and try again" error and nothing seems to fix it, try this:
1. Boot into CWM off an SD card
2. Mount /bootdata via CWM
3. Log in from your computer using "adb shell"
4. mount -o rw,remount /bootdata
5. dd if=/dev/zero of=/bootdata/BootCnt bs=1 count=4
6. dd if=/dev/zero of=/bootdata/BCB bs=1 count=1088
7. Remove SD card
8. Reboot
Thanks Kring789 so much, i have a same problem like you. I do step by step as you wrote, but at step 4, i have a error message from adb shell "remount /bootdata
/sbin/sh: remount: not found". And i can't reset my nook to factory default, it still display "Please restart your device and try again". Help me!
Sorry for my bad English, i'm vietnamese
tien_ttm said:
Thanks Kring789 so much, i have a same problem like you. I do step by step as you wrote, but at step 4, i have a error message from adb shell "remount /bootdata
/sbin/sh: remount: not found". And i can't reset my nook to factory default, it still display "Please restart your device and try again". Help me!
Sorry for my bad English, i'm vietnamese
Click to expand...
Click to collapse
Can you copy/paste the exact command-line you used? It sounds like you might have a space somewhere it doesn't belong, or something like that.
Yes, i copied command-line from your first post. I don't understand my nook tablet. It'll lost all the data and program that i have installed after i reboot it. It keep the data and program 2 months ago. I have copied some mp3 songs to internal card, after reboot it, all of songs disappear. I bought it from internet so i can't know what happened to it.
tien_ttm said:
Thanks Kring789 so much, i have a same problem like you. I do step by step as you wrote, but at step 4, i have a error message from adb shell "remount /bootdata
/sbin/sh: remount: not found". And i can't reset my nook to factory default, it still display "Please restart your device and try again". Help me!
Sorry for my bad English, i'm vietnamese
Click to expand...
Click to collapse
If I am reading your comment correctly, it looks like you're using the wrong command: typing 'remount' instead of 'mount', is that correct?
Yes, "mount -o rw,remount /bootdata" is one command, not two commands separated by a comma.
kring789 said:
Yes, "mount -o rw,remount /bootdata" is one command, not two commands separated by a comma.
Click to expand...
Click to collapse
I fixed this command-line. Adb shell did not show error, but NT still display "Please restart...". Hix, what's wrong with my NT
tien_ttm said:
I fixed this command-line. Adb shell did not show error, but NT still display "Please restart...". Hix, what's wrong with my NT
Click to expand...
Click to collapse
Paste your entire adb shell session in here and let me take a look. Also, did you remember to remove your SD card before rebooting?
NT8 will not boot except via SD
Thank you so much for posting this.
I have the 8gb model NT and (mistakenly) tried to flash CWM & CM7a to the EMMC of my tablet. At that time, there were no warnings about how it would brick the NT8.
Now, my tablet will not boot to ANYTHING on the internal memory. I do NOT get the warnings that you mention - or even a flash of light. No matter how I try to boot it (with or without cable, with or without the Nook button) or how long I hold the buttons down, it still remains with a BLACK SCREEN.
However, the SDCard will boot properly. I followed your instructions in the O.P. precisely and I did NOT receive any errors. However, it still will not boot internally.
I then tried Veronica's process to flash CM9 to the internal (which is supposed to work on NT8). The flash process (via SD/CWM) went properly and I did not receive any errors. However, I still cannot get anything to boot (except my SDCards).
If I put my CM7a (bootable) SDCard into the NT8, it boots and runs great! Likewise meghd00t's recovery/CWM sdcard boots and runs properly.
I can do ADB & FASTBOOT and I have even done the dd to download my partitions (for backup) and then dd copies from online. Still no joy.
However, even after dd'ing p5, ADB still reports my TRUE serial number? It seems that the dd to part5 did not take?
The only other thing that I have found, that seems significant, is the fact that when I am in CWM, I cannot mount the EMMC. I can ADB/shell into the device but that did not allow me to mount the emmc either.
Any ideas? How can I force the device to mount the emmc?
Unbrick & return NT8 to STOCK
This process did NOT clear my Nook Tablet (8GB). Neither did any of the other (previously existing) methods clear it. It was bricked and would ONLY boot with a bootable SDCard. Otherwise, it remained totally black.
However, Meghd00t's recovery SDCard did the trick. It should work for either NT8 or NT16 devices and restores the Nook to Stock configuration. I did NOT lose my serial number.
Find Meghd00t's thread here: http://forum.xda-developers.com/showthread.php?t=1562130
video
Kringle789, i can't understand your instruction... could you make videoinstruction?
P.S. please, help me. It's the brand new device for me and I'm very sad that I can't use it.
P.P.S. I can turn on CM7 from SD.
xstranger said:
Kringle789, i can't understand your instruction... could you make videoinstruction?
P.S. please, help me. It's the brand new device for me and I'm very sad that I can't use it.
P.P.S. I can turn on CM7 from SD.
Click to expand...
Click to collapse
I have... http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/ the video is embedded.
Sent from my Nook Tablet using xda premium
videoinsruction
Thank you raywaldo, but this video about how to unbrick NT when there is no message "Please restart your device and try again..." (I have this message)
Thats why I need videoinstruction for unbricking by kring789
Sorry for my English and please help.
xstranger said:
Thank you raywaldo, but this video about how to unbrick NT when there is no message "Please restart your device and try again..." (I have this message)
Thats why I need videoinstruction for unbricking by kring789
Sorry for my English and please help.
Click to expand...
Click to collapse
Sorry but I haven't seen that message. Have you tried the obvious ... restart and try again. I suspect that you have. Don't have any other ideas.
Sent from my Nook Tablet using xda premium
restart
Yes. I have tried. Maybe...=)
Could you tell me how to restart device?
I want to do it again. Maybe I have done something wrong.
Restart
xstranger said:
Yes. I have tried. Maybe...=)
Could you tell me how to restart device?
I want to do it again. Maybe I have done something wrong.
Click to expand...
Click to collapse
To restart:
Hold the power button for 30 seconds to power off.
Release & then press the power button again until the "n" screen appears.
raywaldo
It doesn't work.
Thank you.
xstranger said:
raywaldo
It doesn't work.
Thank you.
Click to expand...
Click to collapse
is the back lite "on" ? what is you hold down the 'power' and the 'N' at the same time ?
old_fart said:
is the back lite "on" ? what is you hold down the 'power' and the 'N' at the same time ?
Click to expand...
Click to collapse
nothing had happend. It's still the same problem.
I suppose, I have damaged the booting section/s.
And I don't know what to do...(
Maybe that
I can't download CWM on SD. Can anybody help me? Please, give me some instruction.
Welp, after spending over 26 honest-to-God hours researching a "cure" for this, I am still without a solution. I hope a kind soul will be able to guide me to the light, because I have been unable to find it on my own.
I am going to try to be as through as possible, if for nothing else than doing a mental checklist to see if I missed some obvious step along the journey. Also, maybe a keen observer will be able to spot what I'm doing wrong.
So,
My Asus Prime is bricked. I'm stuck on scenario 3 (according to this post:http://forum.xda-developers.com/showthread.php?t=1514088&)
In chronological order, here's what happened:
1. I'm running Virtuous Prime 1.0
2. I flash ClockworkMod Recovery Touch v5.8.1.8
3. I rebooted into recovery and wiped data/factory reset, cache, dalvik cache
4. I performed a backup of my old ROM
5. I flashed a new ROM, then hit 'reboot system now'
6. I'm stuck at the Asus logo screen; Android won't boot.
I am able to access recovery and activate Fastboot mode; definitely scenario 3.
Then, also in chronological order:
1. I restarted the tablet, pressed the up volume key and accessed the other menu with 3 options
2. I hit the 'wipe data' option
3. Try to boot Android
4. Still stuck at the 3 option screen
From what I read, this situation is likely the result of clockworkMod Recovery flashing a bad kernel. Supposedly, it can fixed by flashing a 'good' kernel via fastboot, which requires both a "stock kernel" and a more recent clockwork mod recovery image.
I downloaded the SDK package and downloaded pretty much everything, including the USB drivers. I downloaded a stock kernel called stock_9.4.2.21_kernel-signed and a CWM recovery image and placed them inside the "tools" folder.
I opened a command window and while having the tablet plugged in, typed 'adb devices'. I get 'List of devices attached' but then a blank space.
Here's what happened next:
1. I re-plugged in the tablet in Recovery mode to my AMD X64 Windows 7 PC and got an "USB device not recognized" message.
2. I went to Device Manager and under "Universal serial bus controllers" I see a yellow triangle mark besides an "unknown device" option.
3. Right click on "unknown device" and try to update the drivers manually using the Universal_Naked_Driver_Beta_0.6.1
4. When I select the folder in which the drivers are located Windows gives me a message of "the best driver software for your device is already installed". Back to step 3.
5. I try "let me pick from a list of device drivers on my computer" and hit "have disk option"
6. Upon choosing the android_apxusb file inside the universal naked drivers folder, I get the following error: "the folder you specified doesn't contain a compatible software driver for your device (...) make sure it is designed to work with Windows for x64-based systems."
7. Try again this time choosing file android_apxusb; same error.
I heard that some Windows 7 x64 users are having issues installing drivers; that may be my case too. I, however, don't have access to any other Window or Macs or Linux PCs in my house. Still, if this is the issue, then I might try redoing things in a different PC at a friend's house or something.
Bottom line? I think I know what to do, but I can't install the universal naked (nor the official Asus Prime) drivers. What now? Is there an easy fix for Brick scenario 3?
I have read God knows how many discussions on the subject, but I haven't been able to find a solution to my issue. I got no support from Freenode #asus-transformer; some ops were even downright rude. Any help is greatly appreciated.
For what is worth, I'll be donating $50 to whoever is able to help me navigate through this issue and get my tablet back and running.
Thanks again for reading this far.
TL;DR: I bricked my Prime and I'm stuck in scenario 3. I will donate $50 dollars to whoever can help me unbrick it.
Hey,
try to get a Live CD like Ubuntu.
Get the Linux files from the ViperMOD thread. It includes the "adb" executable.
Try to get ADB running there.
Go to the freenode IRC Channel "#asus-transformer" on Freenode (http://webchat.freenode.net/?channels=asus-transformer) and ask for help like described in the unbrick thread!
Greetz
Edit: No need for donate!
hanzo001 said:
3. I rebooted into recovery and wiped data/factory reset, cache, dalvik cache
4. I performed a backup of my old ROM
Click to expand...
Click to collapse
In that order? So you backed up an empty rom?
You don't mention; do you have valid nandroid backup? Can you restore it?
Do you have a rom zip on your device? What happens if you wipe and re-flash?
I would suggest a couple of options.
I notice that you have not once (according to what you have written) formatted /System if you still have a good ROM on your memory card that is flashable I would format all partitions in recovery /System, /Cache, /Staging and /Data then reflash the ROM.
You could also try an advanced restore and flash only the boot image from your nandroid.
Also, I have to agree with chrischdi, there is no need for a bounty for this. Your problem is one of the reasons we are all here in the first place.
Thanks for your answer; I'll answer yours
djmcnz said:
In that order? So you backed up an empty rom?
You don't mention; do you have valid nandroid backup? Can you restore it?
Do you have a rom zip on your device? What happens if you wipe and re-flash?
Click to expand...
Click to collapse
1. Yes, in that order; I backed an empty ROM
2. No, I don't have a valid nandroid backup (go figure; just this single freaking time I forgot to backup before wiping data/cache/dalvik cache)
3. No other ROM on my device. I had a new ROM when I performed the flashing, but when I got to the point where I hit "deleate data" in the 3-option menu, I lost everything on the SD card
4. When I wipe and reflash I'm stuck on the same loop. Maybe flashing a 'good' ROM will fix it; the issue is, my PC doesn't know what I'm plugging in when I connect the tablet to it.
Thank you for your support
Thank you, I'll try a Live CD. I'm downloading now even as we speak.
When that's finished, I'll grab the Linux files.
I guess that sorts of confirms my hypothesis that my main issue is with Windows... *sigh* WINDOWS!
I tried getting help from freenode's #asus-transformer in the past, but... lets say that on the overall my experience could have been better. I'll try again later tonight, where hopefully I'll be able to talk to RaYmAn, a volunteer in the original Diamonback post who is offering supports to users in my specific situation.
By the way, thanks for pointing me with a clickable link to the IRC chat; I've never used IRC before in my life, and getting it to work, dumb as it may sound, took me quite to figure out. Thank you again for your help and support!
chrischdi said:
try to get a Live CD like Ubuntu.
Get the Linux files from the ViperMOD thread. It includes the "adb" executable.
Try to get ADB running there.
Click to expand...
Click to collapse
Thank you for your answer. It is really nice to have a helpful person around; Like I mentioned in my op, my experience on freenodes' #asus-transformer chat was a bit... discouraging. I figured most would want some form of payment for their time, but here you both are, proving that there is kindness in this world.
I'll address your comments:
1. I did wipe /System; after NOTHING I tried on recovery worked, I did manual wiping of everything, trying to boot each time; similar results.
2. I do not have a good ROM on the memory card. Before doing the 'wipe data' from the 3-option menu, re-flashing a good ROM did no good nevertheless. From here is where I started suspecting that it was the fault of CWM not flashing a proper kernel.
3. I tried the advanced restore as well, an like in #1, I tried rebooting each time, just to make sure it would work. But it didn't.
Thank you again for your support. It feels great to know there's someone backing you up out of the goodness of their heart.
Right now I'll try to redo my steps from a Live CD Linux environment; hopefully that'll work. Freaking Windows...
Doktaphex said:
I would suggest a couple of options.
I notice that you have not once (according to what you have written) formatted /System if you still have a good ROM on your memory card that is flashable I would format all partitions in recovery /System, /Cache, /Staging and /Data then reflash the ROM.
You could also try an advanced restore and flash only the boot image from your nandroid.
Also, I have to agree with chrischdi, there is no need for a bounty for this. Your problem is one of the reasons we are all here in the first place.
Click to expand...
Click to collapse
Thank for your support, guys
I just wanted to shout out a big thanks to the great people who have offered me suggestions regarding this issue. I'll re-do my steps this time from inside the Live CD version of Ubuntu later tonight, and I will update.
Best regards,
me
hanzo001 said:
I just wanted to shout out a big thanks to the great people who have offered me suggestions regarding this issue. I'll re-do my steps this time from inside the Live CD version of Ubuntu later tonight, and I will update.
Best regards,
me
Click to expand...
Click to collapse
Hope it works out for the best, life is better with a little Nix in it.
What if you load a rom like aokp onto an external SD then flash that? That flashes everything you would need. Then if you want to back to virtuous you could restore the stock boot img. Im tired and I'm probably not understanding the issue correctly so forgive me if that is indeed the case.
Sent from my MB870 using xda premium
CadenH said:
What if you load a rom like aokp onto an external SD then flash that? That flashes everything you would need. Then if you want to back to virtuous you could restore the stock boot img. Im tired and I'm probably not understanding the issue correctly so forgive me if that is indeed the case.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
You cannot use an external SDcard with any version of CWM for the Prime.
CadenH said:
What if you load a rom like aokp onto an external SD then flash that? That flashes everything you would need. Then if you want to back to virtuous you could restore the stock boot img. Im tired and I'm probably not understanding the issue correctly so forgive me if that is indeed the case.
Sent from my MB870 using xda premium
Click to expand...
Click to collapse
Thanks for the thought. I tried that too; for some reason, ClockworkMod Recovery won't read the SD card at all!
Linux
[Update]
In general, this could be going better.
I finally got Ubuntu.
I plugged in the tablet while (the tablet is) on recovery mode, and nothing happens.
I was expecting a pop-up menu, or a notification somewhere acknowledging that I connected a device to the PC, but nothing. I'm just going to assume that Linux somehow knows.
I then downloaded the Android SDK for Linux, unziped, and there's no executable file inside. I'm supposed to download the rest of the file via the terminal, apparently, but this one doesn't work like its Windows counterpart either, so I have no clue what to do now.
Jesus...
Bottom line: I'm in Linux, I downloaded the Android SDK, the universal naked drivers and a stock kernel. Now what?
Try to get ADB running in the recovery mode.
In the files of ViperMOD are the executables. Just open up a console / shell and go to the directory via the "cd" command.
Then in the ViperMOD directory execute "sudo ./adb shell" to try the adb connection.
If the adb connection is ok, mount the sdcard via Recovery Menu and then push a file / rom to the sdcard.
For example with the command:
"sudo ./adb push /media/rom.zip /sdcard/"
(I don't know if this are the correct paths.)
Greetz
Thank you, Chris.
While on the terminal, I'm inside the viperMOD folder. Whenever I try execute "sudo ./adb shell" I get this: "sudo ./adb: order not found"
The tablet is plugged in, and in recovery mode.
I haven't installed Java nor the Android SDK because I haven't figured out a way to do it --why can't Linux be double-click action-oriented? *sigh* Anyway, does not having those things installed have something to do with the answer I'm getting from the Terminal?
If so, how in the world do I install them?
I'm never using Touch Recovery again, my word.
Thanks in advance.
Hey,
are you sure that there is "order not found?"
Try the command "ls" to see what files are available. If there is one, called "adb" you are in the right directory. If there is no "adb" then you have to move to the right directory.
Maybe you could try a "chmod +x adb" first and then execute "sudo adb shell" or such if you are in the right directory.
This is going to sound like a stupid question and sorry if it does. but you can access clockwork still right? what happens when you try to flash back your backup? This is important because I had an error sort of like yours that no one could solve here want to make sure its what happened to me. When i tried to restore the original rom it would get to the part where it was restoring data partition and then error on me reading file or something like that. If thats what you see i know the answer. or at least how i fixed mine.
push a rom
Read NIlsonf post about how to adb push a rom to cwm, you get a stock rooted rom
And adb push the blob file, then run the dd command, unmount staging mount data.
This is what fixed mine, and it looks like it fixed nilsonf's also.
Was this ever resolved? I have the same issue and it looks like I've been through many of the same steps as you've gone through. If you were able to do anything to fix it, please let me know.
I would even up the reward to $100.
Just thinking
Why dont you get someone elses CWM backup and adb push it to the device and restore it from that?
Alright, so this is going to take a bit of explaining, please bear with me.
I got this phone a couple of weeks ago, subsequently rooted it, and shortly thereafter decided upon Viper for my ROM. After playing around for a bit, I took a look at Beastmode kernel yesterday. I backed up my phone, installed the new kernel, and everything went to hell shortly thereafter. Upon rebooting, my phone no longer detected a mounted SD card. Along with this, it also doesn't have working audio. I tried rolling back to my restoration point, but I cannot find it now. While digging through directories in recovery, I've found two things out.
1: There is now a storage/emulation/legacy folder with (almost) every folder that was in mnt/sdcard.
2: My restore point is gone, and I don't have the original kernel on my phone
I figured this wouldn't be THAT big of a problem, connect my phone to my PC, go into ADB and try to push the stock s-off kernel. Next set of problems.
1: /mnt/sdcard is showing as a non-directory, insists it doesn't exist.
2: storage/emulation/ shows as read only, and all lower subdirectories are coming up as not existing (I believe it to be an issue with folder naming, legacy is actually 0 on my file explorer on the phone, I think?).
Where I stand now::
At this moment, I have the HTC Droid DNA Toolkit running, the stock s-off Kernel, and a phone that doesn't cooperate with anything.
Also; I tried downloading the .zip directly on my phone, but because it doesn't think there's an SD card, it's refusing to let me download it. It lets me download apps from the market, though.
Any ideas?
PS! Forgot the biggest SNAFU in all of this. On my phone are about 200 pictures from my vacation which I hadn't put onto my computer yet because I am an imbecile. This is keeping me from wiping the phone down to brass tacks and starting all over. If someone can find a way for me to pull said pictures from my device, I can wipe it and see if that helps.
Killerkendolls said:
Alright, so this is going to take a bit of explaining, please bear with me.
I got this phone a couple of weeks ago, subsequently rooted it, and shortly thereafter decided upon Viper for my ROM. After playing around for a bit, I took a look at Beastmode kernel yesterday. I backed up my phone, installed the new kernel, and everything went to hell shortly thereafter. Upon rebooting, my phone no longer detected a mounted SD card. Along with this, it also doesn't have working audio. I tried rolling back to my restoration point, but I cannot find it now. While digging through directories in recovery, I've found two things out.
1: There is now a storage/emulation/legacy folder with (almost) every folder that was in mnt/sdcard.
2: My restore point is gone, and I don't have the original kernel on my phone
I figured this wouldn't be THAT big of a problem, connect my phone to my PC, go into ADB and try to push the stock s-off kernel. Next set of problems.
1: /mnt/sdcard is showing as a non-directory, insists it doesn't exist.
2: storage/emulation/ shows as read only, and all lower subdirectories are coming up as not existing (I believe it to be an issue with folder naming, legacy is actually 0 on my file explorer on the phone, I think?).
Where I stand now::
At this moment, I have the HTC Droid DNA Toolkit running, the stock s-off Kernel, and a phone that doesn't cooperate with anything.
Also; I tried downloading the .zip directly on my phone, but because it doesn't think there's an SD card, it's refusing to let me download it. It lets me download apps from the market, though.
Any ideas?
PS! Forgot the biggest SNAFU in all of this. On my phone are about 200 pictures from my vacation which I hadn't put onto my computer yet because I am an imbecile. This is keeping me from wiping the phone down to brass tacks and starting all over. If someone can find a way for me to pull said pictures from my device, I can wipe it and see if that helps.
Click to expand...
Click to collapse
Have you tried using an OTG cable to mount a flash drive? That's what I do when I backup/flash anything, I keep all my roms, kernels, backups, basically anything flashable on a flash drive, and use an OTG cable in CWM.
For the pictures:
Step 1; adb reboot recovery
Step 2; adb devices (to make sure it's detected)
Step 2.1: If your phone isn't detected, open sideload in recovery, adb devices again, then close sideload
Step 3: adb pull /sdcard/ C:\<username>\Desktop\sdcardbackup\
To fix everything else you'll probably need to wipe everything and flash a new rom.
EDIT: For future "snafus" the sdcard is on /sdcard/ not /mnt/sdcard/ because it's on internal memory, not mounted memory.
walther1337 said:
For the pictures:
Step 1; adb reboot recovery
Step 2; adb devices (to make sure it's detected)
Step 2.1: If your phone isn't detected, open sideload in recovery, adb devices again, then close sideload
Step 3: adb pull /sdcard/ C:\<username>\Desktop\sdcardbackup\
To fix everything else you'll probably need to wipe everything and flash a new rom.
EDIT: For future "snafus" the sdcard is on /sdcard/ not /mnt/sdcard/ because it's on internal memory, not mounted memory.
Click to expand...
Click to collapse
Well, I feel silly for that confusion. I've pulled everything from the sdcard, which honestly mattered more to me than fixing the phone. I'll putter around with getting the ROM and kernel operating correctly in the next couple of hours.
UPDATE!
Once I had the adb pull command corrected for me, pushing the new ZIP on there was an instant success in recovery. SD card exists correctly once again, installed Viper ROM over, full functionality once more.
Killerkendolls said:
Well, I feel silly for that confusion. I've pulled everything from the sdcard, which honestly mattered more to me than fixing the phone. I'll putter around with getting the ROM and kernel operating correctly in the next couple of hours.
UPDATE!
Once I had the adb pull command corrected for me, pushing the new ZIP on there was an instant success in recovery. SD card exists correctly once again, installed Viper ROM over, full functionality once more.
Click to expand...
Click to collapse
you can always do this too as long as the device is recognized by adb
Code:
adb shell
this will get you into the actual device where you can navigate around by using the " cd /dir_name " command and to go back up a dir use " cd .. " (a space and 2 "."s are needed) or just " cd " to get back to the starting point... if you know how to navigate through a unix terminal then you will know what to do here...
some other useful commands
Code:
ls, ls -a, ls -l, cd, cp, mv
ls = list (lists files/folders) "-a" means all, "-l" just makes it look neat and laid out better.
cd = change directory aka "dir"
cp = copy /path/to/file.ext /path/to/where/you/want/to/save/it/file.ext
mv = move (same as ^ ) except it just moves it and doesn't copy
oh and to exit adb shell just type "exit"
Honestly, just grab a working kernel. And use fastboot. Especially since you're s-off
fastboot flash boot boot.img should get you back in working order.
Sent from my HTC6435LVW using XDA Premium 4 mobile app