Hey,
I'm having difficulty mounting the /system/ directory as read/write on my Legend.
I've tried both "adb remount" and "mount -o remount,rw /dev/block/mtdblock3 /system".
The mount appears to succeed but when I try to do anything I get errors (eg; "touch: /system/test: Out of memory" and "mkdir failed for /system/test, Out of memory")
ro.secure=0 is set in my /default.prop
Code:
# cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
HBOOT: 1.01 S-ON
Does it need to be S-OFF to do so? If so, is it possible to S-OFF my Legend?
Thanks.
You are s-on, so you can't write on /system
You need to have s-off, but you are on hboot 1.0+ where s-off isn't possible yet
Thanks ThauExodus ,
So am I right in thinking that when I flash a rom (let's say "update-cm-7.0.0-RC4-Legend-signed.zip"), I am re-flashing the /system partition?
If that's the case, can I somehow modify the rom before flashing to add custom things? If I extract it and insert a directory called "/system/test", when I flash it will /system/test exist?
A practical example being, if I populate the hosts file (/system/etc/hosts) with AdFree entries then somehow repackage and flash the rom will it work?
Just use Blay0's overlay filesystem (flash the zip with CWM) and you will be able to do what you want
I am S-on and found no reason for s-off..for modifying anything in /system..i use adb in recovery mode..this serves the purpose..
that sounds appealing
abhishek92 said:
I am S-on and found no reason for s-off..for modifying anything in /system..i use adb in recovery mode..this serves the purpose..
Click to expand...
Click to collapse
does that stick? (e.g. remove system apps like stocks)
what are you doing that on? (legend-hboot-os ect)
yes it does stick..when u enter recovery mode..u r allowed to write to /system..ul have to boot into ur custom recovery mode(clockwork/amon)..and then use adb shell from the command line on ur comp...jus search on how to use adb shell in recovery mode..
thank you sir
abhishek92 said:
yes it does stick..when u enter recovery mode..u r allowed to write to /system..ul have to boot into ur custom recovery mode(clockwork/amon)..and then use adb shell from the command line on ur comp...jus search on how to use adb shell in recovery mode..
Click to expand...
Click to collapse
Thank you for the information, from what i have been reading i was convinced that could be a viable way to go about things. I have been reading about adb shell and recovery, unfortunately i find sites like adb for beginners a little rough for an actual beginner-well, not as informative as typing help into the cmd prompt.
As of right now i am trying to compile a list of commands specific to the legend structure.
That is why i would ask what build, hboot or any phone specific info about your phone so i can get a better grasp on how things change from one system\setup to the next.
Following instructions is one thing, i want to understand what i am doing.
Before I flash a new ROM I just open the downloaded ROM zip on the PC and delete apps I don't want from the system directory. Delete stocks, quick office etc. Simplest method for Windows users who don't want to use adb.
Sent from my HTC Legend using XDA App
billyJAM said:
Before I flash a new ROM I just open the downloaded ROM zip on the PC and delete apps I don't want from the system directory. Delete stocks, quick office etc. Simplest method for Windows users who don't want to use adb.
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
wouldnt it be nice if we could do that with our ota updates and just skip the whole rooting process
billyJAM said:
Before I flash a new ROM I just open the downloaded ROM zip on the PC and delete apps I don't want from the system directory. Delete stocks, quick office etc. Simplest method for Windows users who don't want to use adb.
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
It doesn't work that way .
It's just not so symple
http://forum.xda-developers.com/showthread.php?t=760376
But u may give it a try
Just start your phone with clockwork recovery, select mount system and restart adb in advanced menu from recovery. Then start adb on PC and push your file to system,
Adb push ...apk /system/app/...apk
Apk should be in same folder like advanced itself
Sent from my Legend using XDA App
Related
The thing wont recognize my phone and wont show the options to do xrecovery or any of the other options except for Flash...please help im desperate for a rom
You need to root first.
Here: http://forum.xda-developers.com/showthread.php?t=1196421
Then in flashtool click 'ask root permissions' and have your phone unlocked and accept superuser permissions w/the prompt on your phone. Then you're good to go.
*edit- make sure it is the fixed xrec for 2.3.3. I use a Rom w xrec included so I didn't have to install it & I dont remember if that's the one in flashtool now.
Which firmware version are you on?
I have done that already...i am rooted because I have superuser on my phone. Where do I check firmware?
Sent from my X10i using XDA App
zm4 said:
I have done that already...i am rooted because I have superuser on my phone. Where do I check firmware?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
unzip xrecovery file and copy all files manually to the right places using root explorer then check all boxes on permitions.
reboot and try
How do i do that?
zm4 said:
How do i do that?
Click to expand...
Click to collapse
a very old guide written by me HERE
read "2nd mode" but use xrecovery v3 instead the one linked there
will this work for 2.3.3?
zm4 said:
will this work for 2.3.3?
Click to expand...
Click to collapse
these commands still the same you just need to change (eventually) to the right path.
check the zip structure to see that
HTML:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
dd if=/sdcard/busybox of=/system/bin/busybox
dd if=/sdcard/chargemon of=/system/bin/chargemon
dd if=/sdcard/xrecovery.tar of=/system/bin/xrecovery.tar
reboot
chargemon to \system\bin
charger to \system\bin
sh to \system\xbin
xrecovery.tar to \system\xbin
i dont see any busybox file or anything like that...please help i dun think busybox has been installed...
zm4 said:
i dont see any busybox file or anything like that...please help i dun think busybox has been installed...
Click to expand...
Click to collapse
ok...you have a reading problem kiddin´
Crowds said:
these commands still the same you just need to change (eventually) to the right path.
check the zip structure to see that
Click to expand...
Click to collapse
type this:
HTML:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
dd if=/sdcard/chargemon of=/system/bin/chargemon
dd if=/sdcard/charger of=/system/bin/charger
dd if=/sdcard/sh of=/system/xbin/sh
dd if=/sdcard/xrecovery.tar of=/system/xbin/xrecovery.tar
reboot
this should do it
cheers
where do i get this adb thing?
zm4 said:
where do i get this adb thing?
Click to expand...
Click to collapse
forguet it...
copy all files to sdcard then copy/paste to the right places after that use root explorer and do this ON EVERY FILE YOU COPIED:
HTML:
- Press and hold on each file;
- Check all Permitions on the drop down menu;
- After changes were made save and exit;
- Reboot.
try enter on xrec
*Cannot open for read: No such or directory* wth?
where does meta go?
zm4 said:
where does meta go?
Click to expand...
Click to collapse
Anywhere. Just copy the files I told you to. I didn't referred anything about that, did I?
Sent from my X10 Erenz MIUI 1.9.2 using Tapatalk
Just start all over with flashtool it will work then.
Go to settings then applications, then development, check debug mode.
Start flash tool on your pc and connect the phone
IF the phone is rooted, it should be recognized by flash tool
On flash tool click ask root perm, look at your phone screen, superuser should pop up asking if to give permission, simply choose allow.
Then click recovery on flash tool and wait a sec....
should pop up asking which gingerbread version to use. choose 0.3GB, since its gb version you have.
when you're ready to use xrecovery, restart the phone
as soon as the phone comes on and the first sony ericsson name comes up, keep pressing the back button, xrecovery will come up.
i did both kernel things...but the thing is it won't recognize my device as a rooted device...i have superuser and I have used apps that require root...so i guess the problem is well idk...and thats what i need help with sorting out.
1. Install busybox from market (xrec needs busybox)
2. Give root explorer root acces and mount /system writeable (look in settings of your file explorer)
3. Copy files to right place:
chargemon to /system/bin
charger to /system/bin
sh to /system/xbin
xrecovery.tar to /system/xbin
4. Give above files the right permissions (long touch on file and choose property option):
user > read, write, execute
other > read, execute
group > read, execute
Hey I'm havging a simple adb issue. I'm trying to push a file via adb to the root of my sdcard but I keep receiving "Failed to copy.......Is a directory. What does that mean, and what could I be doing wrong? Thanks
Here's what I've tried:
adb push cd C:\Users\David\Documents\Capture.JPG /sdcard
adb push C:\Users\David\Documents\Capture.JPG /sdcard
cd C:\Users\David\Documents\
adb push Capture.jpg
filmaker said:
Hey I'm havging a simple adb issue. I'm trying to push a file via adb to the root of my sdcard but I keep receiving "Failed to copy.......Is a directory. What does that mean, and what could I be doing wrong? Thanks
Here's what I've tried:
adb push cd C:\Users\David\Documents\Capture.JPG /sdcard
adb push C:\Users\David\Documents\Capture.JPG /sdcard
cd C:\Users\David\Documents\
adb push Capture.jpg
Click to expand...
Click to collapse
you're typing incorrect paths and commands.
first you need to cd into your tools, mine looks like this:
cd C:\android-sdk\platform-tools
then it'll be in your tools folder and you'd do this:
adb push Capture.jpg /sdcard/Capture.jpg
by the way, you probably coud've simply mounted the phone as a disk drive and transefered the image that way too.
it is in your best interest to learn more about adb, I made a links thread with a few links to adb guides, just click my avatar to find my threads. also if you ever have a quick question feel free to ask in the q+a thread in my sig.
filmaker said:
Hey I'm havging a simple adb issue. I'm trying to push a file via adb to the root of my sdcard but I keep receiving "Failed to copy.......Is a directory. What does that mean, and what could I be doing wrong? Thanks
Here's what I've tried:
adb push cd C:\Users\David\Documents\Capture.JPG /sdcard
adb push C:\Users\David\Documents\Capture.JPG /sdcard
cd C:\Users\David\Documents\
adb push Capture.jpg
Click to expand...
Click to collapse
First cd to the directory that the file you want to push is in. So if its in documents, do:
cd \Users\David\Documents\
Then do : adb push Capture.jpg /sdcard/
That should do the trick, assuming you have adb set up properly to execute commands from any directory (adb.exe must be set in PATH)
Sent from my PG86100 using Tapatalk
il Duce said:
you're typing incorrect paths and commands.
first you need to cd into your tools, mine looks like this:
cd C:\android-sdk\platform-tools
then it'll be in your tools folder and you'd do this:
adb push Capture.jpg /sdcard/Capture.jpg
by the way, you probably coud've simply mounted the phone as a disk drive and transefered the image that way too.
it is in your best interest to learn more about adb, I made a links thread with a few links to adb guides, just click my avatar to find my threads. also if you ever have a quick question feel free to ask in the q+a thread in my sig.
Click to expand...
Click to collapse
Thanks lol that helped a lot
Pushing via ADB - permission denied
Hello!
I accidently bricked my phone. Zenfone 2...
On trying to send file via adb push in order to flash via tethered cwm, i get notice permission denied.
Actual status, fully reset via cwm, no possibility to get rom on device, external sd not detected, otg same.
HELP ME!
Device was rooted und adb allowed before first trial flashing new rom and the actual desaster...
AlexDGF said:
Hello!
I accidently bricked my phone. Zenfone 2...
On trying to send file via adb push in order to flash via tethered cwm, i get notice permission denied.
Actual status, fully reset via cwm, no possibility to get rom on device, external sd not detected, otg same.
HELP ME!
Device was rooted und adb allowed before first trial flashing new rom and the actual desaster...
Click to expand...
Click to collapse
This is an HTC Evo 3D thread. Check this thread for Zenfone 2. If you can't figure it out feel free to send me a message to give you some information.
http://forum.xda-developers.com/showthread.php?t=3096596
Asus Zenfone 2 | Resources all in one thread
Sent from my Evo 3D.
Crashed zenfone 2
Hello!
I accidently bricked my phone. Zenfone 2...
On trying to send file via adb push in order to flash via tethered cwm, i get notice permission denied.
Actual status, fully reset via cwm, no possibility to get rom on device, external sd not detected, otg same.
HELP ME!
Device was rooted und adb allowed before first trial flashing new rom and the actual desaster...
** ADMINS/MODS, if your going to delete this thread, if you dont' mind please advising me on the correct way to post this or correct place, Thanks **
******************************************************
QUESTION: How can I create a update.zip (i.e., PG05IMG.zip) for the thunderbolt and then flash it with fastboot or in bootloader.
ANSWER: Flash a rom on your phone and then using adb
adb shell dd if=/dev/block/mmcblk0p25 of=/sdcard/system.img
Make a zip folder and put in it system.img along with boot.img from the
rom zip and whatever other partitions you want, perhaps a radio
mdm9k.img and radio.img along with a recovery.img and you can
make your own little custom rom to be flashed with fastboot or as an
update, then you can either put it on the sd card as an PG05IMG.zip and do
a bootloader update (s-off only) or fastboot flash zip (zipname.zip)
for eng-hboot only... really cool.
******************************************************
******************************************************
******************************************************
******************************************************************************************************************************************************************
1. Ok I've been trying dilligently in the past to do 2 things. I want to create my own SYSTEM.img from the roms i'm making so I can create PG05IMG's instead of .zips to flash, that way i can include the radio etc., this is for learning purposes (PLEASE DO NOT SUGGEST WELL KNOWN METHODS OR SIMPLY QUESTION WHY IM DOING THIS UNLESS ITS INVOLVED IN THE SOLUTION PROCESS.)
I have tried several different methods for backing up my system.img etc., I need someone to help me with this, and I'm willing to donate to get this done.
2. Secondly, I need to figure out a way to flash roms from command line using adb while the phone is in recovery, I don't have any problem flashing roms with fastboot if someone can show me or explain how to make the system.img actually work.
Already tried this:
Code:
adb push C:\ROM.zip /data/
adb shell
recovery --update_package=DATA:ROM.zip
This would simply make the thunderbolt go to an exclamation point and do nothing.
I was however able to get this to work on the same version of recovery 5.0.2.1 on a Nexus S I9020T, but not on the Thunderbolt ADR6400L.
Simple anlysis of questions
1. How can I turn a rom.zip (system folder) into a (system.img) "fastboot flashable"
2. How can I take a rom.zip and flash it in recovery using adb
Donation negotiable, and I appreciate any time/clues/answers/suggestions, but I really need to figure this out.
Hi there,
I have a plan in the works already since the beginning of last month. I call it CASUAL. Cross-platform Adb Scripting, Unified Android Loader. Its purpose is to do exactly what you wish. This is a project I intend to begin work on next month. I've set up a repository for the work and I will begin soon. Basically, it will do exactly what you want.
Edit: I do not intend on rushing for the bounty. My goal is to do it right. If someone wishes to rush it, go ahead and collect the bounty. My goal is to provide something which will create an infrastructure contained within a single cross-platform java file. I've got most of the heavy lifting already done from my Heimdall one-click project. However, in order to complete the job, it seems that I must reformat my desktop because my IDEs are acting wonkey.
AdamOutler said:
Hi there,
I have a plan in the works already since the beginning of last month. I call it CASUAL. Cross-platform Adb Scripting, Unified Android Loader. Its purpose is to do exactly what you wish. This is a project I intend to begin work on next month. I've set up a repository for the work and I will begin soon. Basically, it will do exactly what you want.
Edit: I do not intend on rushing for the bounty. My goal is to do it right. If someone wishes to rush it, go ahead and collect the bounty. My goal is to provide something which will create an infrastructure contained within a single cross-platform java file. I've got most of the heavy lifting already done from my Heimdall one-click project. However, in order to complete the job, it seems that I must reformat my desktop because my IDEs are acting wonkey.
Click to expand...
Click to collapse
Adam thanks for your response, really great to hear and the fact that your not rushing for money is great too I understand. But hey, without regard to the cross platform ADB rom flasher, can you just point me in the right direction as far as where to go to learn how to say, "make a system.img of a rom" so I can fastboot flash it..
Like so I can take a rom zip and be able to turn it into a system image that is fastboot flashable on the thunderbolt... at that point i can just manually flash the boot.img and radio and i'm good to go.
So if i can just figure out how to do that one little thing that would be huge and much appreciated... thanks so much man. I will gladly donate for an answer to this question.
halfcab123 said:
Adam thanks for your response, really great to hear and the fact that your not rushing for money is great too I understand. But hey, without regard to the cross platform ADB rom flasher, can you just point me in the right direction as far as where to go to learn how to say, "make a system.img of a rom" so I can fastboot flash it..
Like so I can take a rom zip and be able to turn it into a system image that is fastboot flashable on the thunderbolt... at that point i can just manually flash the boot.img and radio and i'm good to go.
So if i can just figure out how to do that one little thing that would be huge and much appreciated... thanks so much man. I will gladly donate for an answer to this question.
Click to expand...
Click to collapse
Generally, to flash a ROM, you type:
Code:
adb reboot bootloader
then on your desktop you use fastboot and type
Code:
fastboot oem unlock
fastboot flash your partition your file...
I'd follow this guide to get S-OFF: http://forum.xda-developers.com/showthread.php?t=1310014 then find your neato-bandito rom from this forum: http://forum.xda-developers.com/forumdisplay.php?f=943 and flash it.
AdamOutler said:
Generally, to flash a ROM, you type:
Code:
adb reboot bootloader
then on your desktop you use fastboot and type
Code:
fastboot oem unlock
fastboot flash your partition your file...
I'd follow this guide to get S-OFF: http://forum.xda-developers.com/showthread.php?t=1310014 then find your neato-bandito rom from this forum: http://forum.xda-developers.com/forumdisplay.php?f=943 and flash it.
Click to expand...
Click to collapse
Thanks Adam, but, I already know how to flash partitions in fastboot, but what i need to know is how to "make" partitions. as in like, take a system folder and turn it in to a system.img so i can fastboot flash system system.img
Please please need to know thanks
halfcab123 said:
Thanks Adam, but, I already know how to flash partitions in fastboot, but what i need to know is how to "make" partitions. as in like, take a system folder and turn it in to a system.img so i can fastboot flash system system.img
Please please need to know thanks
Click to expand...
Click to collapse
That's not overly hard to do. There's a guide I think on the cyanogen website for how to do it. Basically you use the "dd" tool in linux.
yareally said:
That's not overly hard to do. There's a guide I think on the cyanogen website for how to do it. Basically you use the "dd" tool in linux.
Click to expand...
Click to collapse
Dude please, can you walk me through it, like I said I'll donate. Or alteast give me a link to where its at, then i'll turn this post into a how to for noobs. I learn at 300,000,000 m/s^2
halfcab123 said:
Dude please, can you walk me through it, like I said I'll donate. Or alteast give me a link to where its at, then i'll turn this post into a how to for noobs. I learn at 300,000,000 m/s^2
Click to expand...
Click to collapse
It looks like there's a stupidly large amount of partitions on the Thunderbolt. if you can do this:
Code:
adb shell mount
and get the partition information, I can tell you how to do a backup and restore.
it will be something like this.. this gets run once to get a temporary storage area on the /sdcard
Code:
adb shell mkdir /sdcard/mybackup
Code:
mkdir /PATH/TO/YOUR/DESKTOP/backup
adb shell dd if=/dev/block/mmcblk0p25 of=/sdcard/mybackup/system.img
adb pull /sdcard/mybackup/system.img /PATH/TO/YOUR/DESKTOP/backup/system.img
These commands do: make a new folder for working on your desktop. direct disk backup of mmcblk0p25 (SYSTEM partition). Pull the system.img to your working folder on your desktop.
If you have your image on a Linux or Mac desktop, you can mount it like this..
Code:
cd /PATH/TO/YOUR/DESKTOP/backup
mkdir MountFolder
sudo mount ./system.img ./MountFolder
#if this doesnt work, then do this
sudo mont -o loop -t ext3 ./system.img ./MountFolder
you can make changes to the system which has been mounted onto your computer. Then unmount it and push it back to your device.
to unmount and flash it back you do this:
Code:
sudo umount ./MountFolder
adb push /PATH/TO/YOUR/DESKTOP/backup/system.img /sdcard/mybackup/system.img
adb shell dd if=/sdcard/mybackup/system.img of=/dev/block/mmcblk0p25
This pushes your backup to your device, then does a direct disk write of the image file to the disk partition
↑ last poster pretty much sums it up in detail
AdamOutler said:
It looks like there's a stupidly large amount of partitions on the Thunderbolt. if you can do this:
Code:
adb shell mount
and get the partition information, I can tell you how to do a backup and restore.
it will be something like this.. this gets run once to get a temporary storage area on the /sdcard
Code:
adb shell mkdir /sdcard/mybackup
Code:
mkdir /PATH/TO/YOUR/DESKTOP/backup
adb shell dd if=/dev/block/mmcblk0p25 of=/sdcard/mybackup/system.img
adb pull /sdcard/mybackup/system.img /PATH/TO/YOUR/DESKTOP/backup/system.img
These commands do: make a new folder for working on your desktop. direct disk backup of mmcblk0p25 (SYSTEM partition). Pull the system.img to your working folder on your desktop.
If you have your image on a Linux or Mac desktop, you can mount it like this..
Code:
cd /PATH/TO/YOUR/DESKTOP/backup
mkdir MountFolder
sudo mount ./system.img ./MountFolder
#if this doesnt work, then do this
sudo mont -o loop -t ext3 ./system.img ./MountFolder
you can make changes to the system which has been mounted onto your computer. Then unmount it and push it back to your device.
to unmount and flash it back you do this:
Code:
sudo umount ./MountFolder
adb push /PATH/TO/YOUR/DESKTOP/backup/system.img /sdcard/mybackup/system.img
adb shell dd if=/sdcard/mybackup/system.img of=/dev/block/mmcblk0p25
This pushes your backup to your device, then does a direct disk write of the image file to the disk partition
Click to expand...
Click to collapse
This is very informative and I actually realized something that I think will definitely help me, however its kinda not really the answer to my question.. and at the same time it is kind of another solution to the question that I asked.
What I asked was how to turn the system folder from a *.zip "rom" into a system.img that was fastboot flashable
You basically told me how to make a backup of the system, modify, and flash back to my phone.... which is interesting...
Basically what I take from this, please let me know if i'm on the right track here:
If the goal is to flash a rom on an htcdev unlocked phone one would:
(assuming system.img already created from backup, flashing to another phone)
Code:
adb reboot recovery
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p6 (data wipe)
adb shell mount /sdcard/
adb shell dd if=/sdcard/system.img of=/dev/block/mmcblk0p25
adb reboot bootloader
fastboot erase cache
fastboot flash boot boot.img
fastboot reboot
After trying this, I was both unable to mount sd card for some odd reason
using adb shell mount /sdcard/ and I was also unable to wipe data
at partition mmcblk0p6 with /dev/zero it just hung for 4 minutes.. does it take longer ? I ended it.
My only other option that I can think of is to downgrade the thunderbolt and run revo to get s-off and then make a PG05IMG.zip with a custom system.img and boot.img and flash it as a PG05IMG.zip in bootloader... so coming from this direction which seems to be much much easier, if I say took a PG05IMG for the MR4 (2.11.605.9) replaced the hboot with an eng-hboot, replaced the system.img and the boot.img would it work ??? I'm going to try it lol, probably going to be an epic fail.. any comments appreciated.
UPDATE: after posting this I realized that with a revolutionary s-off, the hboot is protected from being updated with an RUU, in bootloader so I would not have to worry about replacing the HBOOT, the only reason I even mentioned it was because I know that the hboot in the official MR4 RUU is the dev method supported hboot and would probably throw a security warning after flashing... etc., once again any help is great.
There is no direct 1:1 way to convert. However, you can use the update script in the Meta folder as a guide. It will have information to copy files into the system folder and applysymlinks. The commands used by recovery all have a Linux equal.
Delete = rm
Delete recursive = rm -rf
symlink = ln -s
copy = cp
These are android recovery commands which must be translated to their Linux shell equivalants.
AdamOutler said:
There is no direct 1:1 way to convert. However, you can use the update script in the Meta folder as a guide. It will have information to copy files into the system folder and applysymlinks. The commands used by recovery all have a Linux equal.
Delete = rm
Delete recursive = rm -rf
symlink = ln -s
copy = cp
These are android recovery commands which must be translated to their Linux shell equivalants.
Click to expand...
Click to collapse
what if i just straight take the system.img and boot.img and throw them in a PG05IMG.zip and use bootloader to update, will that work ?
halfcab123 said:
what if i just straight take the system.img and boot.img and throw them in a PG05IMG.zip and use bootloader to update, will that work ?
Click to expand...
Click to collapse
I don't know what a pg05img is. However, with samsung devices, we use dd'd system images to flash with Odin. Odin works sorta like fastboot. I don't know if that will help you because I generally use Samsung devices and Samsung does things differently than the rest of Android. From what I understand, fastboot flashing is similar, but I don't know if you can DD an image from a device and just fastboot flash it back onto a device. You can do this with Odin. I don't think there are provisions for flashing images in recovery directly. They DO have executables encorperated within zip files for flashing modems and bootloaders. Before trying a non-standard flashing method, you need to do some reading. It can be risky.
AdamOutler said:
I don't know what a pg05img is. However, with samsung devices, we use dd'd system images to flash with Odin. Odin works sorta like fastboot. I don't know if that will help you because I generally use Samsung devices and Samsung does things differently than the rest of Android. From what I understand, fastboot flashing is similar, but I don't know if you can DD an image from a device and just fastboot flash it back onto a device. You can do this with Odin. I don't think there are provisions for flashing images in recovery directly. They DO have executables encorperated within zip files for flashing modems and bootloaders. Before trying a non-standard flashing method, you need to do some reading. It can be risky.
Click to expand...
Click to collapse
I just made my own PG05IMG.zip and updated in bootloader and it booted into a custom rom, and this is after i erased userdata, cache, system, so i know it works, i even
fastboot oem rebootRUU
fastboot flash zip "customzip.zip"
and that worked too, so stoked man, I can't believe I finally figured it out.
As soon as you told me the mmcblk0p25 could be backed up, it clicked, funny thing is I knew that but I guess I just didn't think it was that simple.
I am rooted but i have been reading on installing a recovery. I don't have a sd card at the moment so not sure if i can use ADB to install a recovery. Why cant i just install recovery through Rom Manager?
eastwood1 said:
I am rooted but i have been reading on installing a recovery. I don't have a sd card at the moment so not sure if i can use ADB to install a recovery. Why cant i just install recovery through Rom Manager?
Click to expand...
Click to collapse
Someone with more knowledge will need to chime in, but I I'd bet the build we are using isn't official, and probably can't be installed through Rom Manager. Give it some time, eventually things will work as normal
And you can use the internal storage to copy over the recovery. I used terminal emulator and the internal memory when I did mine.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
And you can use the internal storage to copy over the recovery. I used terminal emulator and the internal memory when I did mine.
Click to expand...
Click to collapse
Can you explain to me how you went about installing the recovery with only internal storage? I would like to give that a try but not sure the best way to go about it. What commands to use and such, thanks.
eastwood1 said:
Can you explain to me how you went about installing the recovery with only internal storage? I would like to give that a try but not sure the best way to go about it. What commands to use and such, thanks.
Click to expand...
Click to collapse
To all,
I couldn't be bothered with learning ADB, but wanted a custom recovery on my SIII ... maybe you can relate?
Here's the easiest way to do it -- and you don't even need a computer!!! You do, however, already need to be rooted before you can use this method ...
Download your recovery of choice (.. as of this writing, I think there are two: CWM and TWRP ..) and make sure you place a copy in the root drive of your sdcard. Rename it recovery.img, if you want to follow the terminal directions listed below ...
Then, download a terminal emulator onto your device (I use Better Terminal Emulator Pro, which is a paid app) and fire it up.
Once in the terminal emulator, type the following commands one line at a time, waiting after each line for the appropriate prompt:
$ su
# dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
# reboot recovery
Your device should then boot into the custom recovery, which serves as immediate confirmation that you did things correctly.
I just used this method to install birdman's twrp8.img to my SIII and it worked like a charm.
http://forum.xda-developers.com/showthread.php?t=1764398
I dont think that will work. Notice the command says sdcard.
The internal memory on the sgsiii is labeled sdcard for whatever reason. The external sdcard slot is under mnt/extsdcard in root explorer if that helps.
Sent from my SGH-T999 using xda premium
Ok i open Better terminal emulator Pro and it has
/ $ .. when i add in the SU it says
bash: -c: command not found
what am i doing wrong?
I have downloaded and renamed the TWRP.IMG to recovery.img
eastwood1 said:
Ok i open Better terminal emulator Pro and it has
/ $ .. when i add in the SU it says
bash: -c: command not found
what am i doing wrong?
I have downloaded and renamed the TWRP.IMG to recovery.img
Click to expand...
Click to collapse
You need to be rooted and have a "su" command. Typical "rooted" roms include supersu , or equivalent, and busybox (which provides the basic Linux commands). I would install super super and busybox from Google play and try again.
You need the SU command to switch to root user in the shell to have the rights to use dd to overwrite the recovery partition.
I can confirm that the dd command works as that is how I loaded cwm on my s3.
Sent from my SGH-I747M using xda app-developers app
eastwood1 said:
Ok i open Better terminal emulator Pro and it has
/ $ .. when i add in the SU it says
bash: -c: command not found
what am i doing wrong?
I have downloaded and renamed the TWRP.IMG to recovery.img
Click to expand...
Click to collapse
See if this helps.
http://forum.xda-developers.com/showthread.php?t=1739426
For what its worth the reason ROM manager doesn't work is because there is not an official CWM Recovery out for the Verizon S3. We are using the Sprint Recovery
Pompsy said:
For what its worth the reason ROM manager doesn't work is because there is not an official CWM Recovery out for the Verizon S3. We are using the Sprint Recovery
Click to expand...
Click to collapse
There's no official CWM Recovery for any US versions of the GS3, Sprint included. The only official GS3 recovery available is for the international version. The one we're all using right now (I believe) was built by Team Epic. They're historically Sprint devs and so they built it for the Sprint version; however, as you know it works on more than just the Sprint version. Eventually, I'm sure there will be official recoveries direct from Koush.
Personally, I prefer TWRP (bettery touch control layout and options such as compression to save space), but that too is a work in progress.
Here is a complete guide for anyone interested in rooting the HTC Droid DNA. The insecure boot image, TWRP recovery, CWM recovery and SuperSU files used in this guide are not my own developments, and their developers have been credited in the end of this post.
I am only writing this as a newbie-friendly guide for everyone, and am providing my own SuperSU, su and busybox installer zip file that includes everything you need for full root.
Unlock the bootloader of your device by visiting the HTC bootloader unlock page. Warning: This will wipe your data.
UPDATE: Thanks to Verizon, the official bootloader unlocking method mentioned above no longer works. Please refer to this method for unlocking the bootloader.
Download ClockworkMod or TWRP recovery for the device and rename it to recovery.img (or keep the existing name and change recovery.img in the command below to that name).
Download the SuperSU and busybox package and put it on your SD card.
Put your phone into bootloader mode and connect it to your PC via USB.
On your computer, make sure you are in the folder where you downloaded the recovery file and use this command to flash the recovery:
Code:
fastboot flash recovery recovery.img
Finally, reboot your device into recovery, flash the SuperSU and busybox package and reboot your device.
You should now have root access.
Credits:
jcase for unlocking the bootloader after Verizon decided to lock it.
dsb9938 for sharing the CWM port and correcting me regarding my previously posted and now removed second method involving his insecure boot image
Dees_Troy for TWRP recovery.
utkanos for CWM port.
Chainfire for developing SuperSU
I have tried to credit everyone involved but if I have missed out on anyone, please do let me know.
thanks for the guide!
just one question though. when you say "Download the SuperSU and busybox package and put it on your SD card.", what do you mean exactly by SD card? doesn't the DNA not have a SD card? sorry if this is a dumb question. i've never rooted a phone before :/
hotmonkas said:
thanks for the guide!
just one question though. when you say "Download the SuperSU and busybox package and put it on your SD card.", what do you mean exactly by SD card? doesn't the DNA not have a SD card? sorry if this is a dumb question. i've never rooted a phone before :/
Click to expand...
Click to collapse
Internal storage would be another name for the SD card.
touretts69 said:
Internal storage would be another name for the SD card.
Click to expand...
Click to collapse
ah okay, thank you
which device do u use on the htc page?
nyjw said:
which device do u use on the htc page?
Click to expand...
Click to collapse
"Other devices", or similar.
Sent from my ADR6425LVW using xda premium
Awesomeness.
The fact that this phone is rooted a week before its even out... simply awesome. I love XDA!
So excited for this phone.
HQRaja said:
Code:
adb shell mount -o remount,rw /system
[LIST=1]
[*] adb push su /system/bin/
adb push Superuser.apk /system/app/
adb push busybox /system/xbin/
adb shell
chmod 06755 /system/bin/su
chmod 0644 /system/app/Superuser.apk
chmod 04755 /system/xbin/busybox
cd /system/xbin
busybox --install /system/xbin/
exit
exit
[*]Reboot your device.
[/LIST]
Click to expand...
Click to collapse
This will not work. You cannot write to /system except in recovery.
This is why I did not publish my initial root method. Using a package and flashing in recovery is the only way to get files on /system without some really gnarly stuff.
D
.
dsb9938 said:
This will not work. You cannot write to /system except in recovery.
This is why I did not publish my initial root method. Using a package and flashing in recovery is the only way to get files on /system without some really gnarly stuff.
D
.
Click to expand...
Click to collapse
Thanks for your response. =)
Based on my understanding (and my experience with Nexus devices), once you boot using an insecure boot image, you have full root access in ADB since it is running adbd as root on the device. You can then successfully write to the /system partition and the changes persist after reboot. While I can confirm that the above will work on any Nexus device as well as any similar device with an unlocked bootloader and fastboot access, I am not 100% sure if that's how it works on HTC devices that have the S-ON flag. Are you referring to S-ON devices in particular here?
HQRaja said:
Thanks for your response. =)
Based on my understanding (and my experience with Nexus devices), once you boot using an insecure boot image, you have full root access in ADB since it is running adbd as root on the device. You can then successfully write to the /system partition and the changes persist after reboot. While I can confirm that the above will work on any Nexus device as well as any similar device with an unlocked bootloader and fastboot access, I am not 100% sure if that's how it works on HTC devices that have the S-ON flag. Are you referring to S-ON devices in particular here?
Click to expand...
Click to collapse
Normally it does work that way. And I was very disappointed that it did not on this phone, as I made the kernel just for that reason.
I think there was an error in the coding where it tells unlock which partitions to remove write protection from. That, or they just wanna make our lives hard for some reason.
Either way, you cannot write to /system while the phone is booted normally without S-Off. Even as root.
D
.
dsb9938 said:
Normally it does work that way. And I was very disappointed that it did not on this phone, as I made the kernel just for that reason.
I think there was an error in the coding where it tells unlock which partitions to remove write protection from. That, or they just wanna make our lives hard for some reason.
Either way, you cannot write to /system while the phone is booted normally without S-Off. Even as root.
D
.
Click to expand...
Click to collapse
Ah I see. Thanks for pointing that out. I'll remove the second method from my guide, since including that would be pointless if that's the case as you can now confirm.
So does this method work? Or not???Im confused with the last few posts. Thanks
suzook said:
So does this method work? Or not???Im confused with the last few posts. Thanks
Click to expand...
Click to collapse
Edited post is fine. He removed the part I was talking about.
D
.
What I want to know most if anyone knows..will the DNA through verizon be unlockable....I'm actually using the RAZR Maxx hd through verizon and Motorola has restricted unlocking the bootloader because of verizon
Sent from my DROID RAZR HD using xda app-developers app
Irish65 said:
What I want to know most if anyone knows..will the DNA through verizon be unlockable....I'm actually using the RAZR Maxx hd through verizon and Motorola has restricted unlocking the bootloader because of verizon
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
You can't do any of this stuff without unlocking.
As of right now, it is working.
D
.
How do you do the command in the folder were u downloaded to like the instructions say?
idle0095 said:
How do you do the command in the folder were u downloaded to like the instructions say?
Click to expand...
Click to collapse
Please be more specific.
D
.
idle0095 said:
How do you do the command in the folder were u downloaded to like the instructions say?
Click to expand...
Click to collapse
In command prompt, use the "cd" command. The easiest way to do this is to make a folder at the root of your hard drive (C:\) and place all files you need to flash in here e.g. "C:\android\" Then in command prompt, type in "cd .." and press enter until it displays "C:\". Then type (if you use the same name as the example) "cd android" and it will enter the folder "C:\android\" where you placed the files. Now you can continue with the rest of the guide.
CastleBravo said:
In command prompt, use the "cd" command. The easiest way to do this is to make a folder at the root of your hard drive (C:\) and place all files you need to flash in here e.g. "C:\android\" Then in command prompt, type in "cd .." and press enter until it displays "C:\". Then type (if you use the same name as the example) "cd android" and it will enter the folder "C:\android\" where you placed the files. Now you can continue with the rest of the guide.
Click to expand...
Click to collapse
Or if on Windows, simply: Do the following in folder where files are located.
Shift+Right-Click > Open Command Window Here
I've never had an HTC device before but does using the HTC bootloader unlock is that making it s-off? Also I don't see the DROID dna on the list
Sent from my SCH-I535 using xda premium