Related
Just as title says. Ive tried all the fixes for it with no luck.
I dont really care for the trackball anyway, but I cant load roms without being able to scroll down.
Any suggestions xda community.
i had that problem like a week ago,didnt find any answers, i went to verizon and told them my trackball wasnt working and they were going to try and make me pay for another under my warranty,i told them that I read on many forums that it was a hardware issue and after they researched it they exchanged my phone for free.thats the only thing i can tell you to do. hopefully they can do it for you also.
It's the infamous trackball issue. I had ignored it until my came down with it a few months ago, it was around 6 months old. I called Verizon and got a replacement phone, they shouldn't charge you for anything. I couldn't see any other way around it, since I too am a rooted user. Good Luck!
i agree. its a known crappy trackball issue. call verizon and they should sent a replacement. there was an ruu that was an exe ran from your computer that should (someone correct me if i'm wrong) allow you to go back to stock on your eris if you are worried about the verizon people asking about your root. it was posted here, but i just looked and couldn't find it. trying to reup now. will edit this post with a link.
uploaded file http://www.multiupload.com/0B4EAQE25I fyi i'm not responsible if you brick your phone blah blah blah. i actually had nothing to do with writing the file, i just couldn't find it so i reposted it. it is an exe to run on a windows based computer with your eris attached via usb.
gthirty6ptime said:
Just as title says. Ive tried all the fixes for it with no luck.
I dont really care for the trackball anyway, but I cant load roms without being able to scroll down.
Any suggestions xda community.
Click to expand...
Click to collapse
Here is a brutal hack from the Eris Root forum on AF.
I works, but you need to use adb from a PC, and be comfortable working at the command line.
bftb0
I actually sent my phone rooted with KaosFroyo on it and Verizon didn't say anything! I've heard of a handful of people that have done the same.
People have sent it back no problems, but if you're worried run the RUU.
OK, atrix 4g is my first android phone. Got it about a week ago.
I experimented with it a few days then rooted it with superoneclick.
All went just as described in other forum posts regarding this method. Thank you.
Then along came the update to 4.1.57 and guess what?. I applied it, yes, I did...
SO, now my phone is no longer rooted. =(
I figured I would wait for the 4.1.57 update fixes to be circumvented by the wonderful devs here and elsewhere.
Now comes my quandry. I find posts here saying specifically that atrix 4g 4.1.57 is rooted or can be rooted again, but NOT for "Bell" (I assume ATT?) atrix phones.
What is the diff between ATT (Bell?) atrix phones and others?
If I can't root now, will I be able to, possibly later, if I wait for the wonderful devs to do their magic?
Regards,
T.
This is the wrong forum for this question . If you need more help, go to the thread for rooting the newest software (How to root 4.1.57) , or ask in general forum.
Super-T said:
OK, atrix 4g is my first android phone. Got it about a week ago.
I experimented with it a few days then rooted it with superoneclick.
All went just as described in other forum posts regarding this method. Thank you.
Then along came the update to 4.1.57 and guess what?. I applied it, yes, I did...
SO, now my phone is no longer rooted. =(
I figured I would wait for the 4.1.57 update fixes to be circumvented by the wonderful devs here and elsewhere.
Now comes my quandry. I find posts here saying specifically that atrix 4g 4.1.57 is rooted or can be rooted again, but NOT for "Bell" (I assume ATT?) atrix phones.
What is the diff between ATT (Bell?) atrix phones and others?
If I can't root now, will I be able to, possibly later, if I wait for the wonderful devs to do their magic?
Regards,
T.
Click to expand...
Click to collapse
If you bought ur Atrix in an ATT store in the USA....you are good to use the hacks. Bell is the Canadian carrier that sells the Atrix as well. Alot of mods here don't function yet BC there is no restore SBF for the Bell Atrix yet.
Sent from my MB860 using XDA App
Is the update out on the Bell atrix?
And why does that affect you anyway you have an ATT atrix.
RacecarBMW said:
And why does that affect you anyway you have an ATT atrix.
Click to expand...
Click to collapse
It effects me in that I was unaware that BELL != ATT. I know now that my atrix should be safe to root, etc.
As I said in my original post, this is my first android based phone, and I was just trying to make sure I am not about to create an expensive paperweight out of my new phone...
/T
don't do anything until you can run 'adb devices' and get a response, 'fastboot reboot' reboots and rsdlite recognizes your phone. Then at least you're in a position to follow instructions to get it going again if you screw things up.
Hi everyone. I got an X2 a few months ago and it has Android 2.2.2 installed. I used gingerbreak to gain root access and then froze all the extra bloat with Bloatfreezer. This morning I woke up to a message about an update to 2.3. I have a few questions about this..
Do I have to?
Can I use gingerbreak after the update and redressed all of the bloat?
I've been wanting to try one of the custom roms floating around on here but I just haven't had the time to do it. Is the update going to ruin my chance to do that for a while?
One last note, I have used this site in the past to help root my D1, but I still don't really know what is happening on my phone when I root/flash roms/etc. I know its unlikely that someone could teach a whole programming lesson on here, but a sticky for people new to it explaining what is actually happening would be a great help.
Sorry for the long post, thanks for the help.
http://forum.xda-developers.com/showthread.php?t=1193818
I asked mr clown to add this to the roll up sticky I don't think he got around to it yet, if you follow these directions you will have rooted 2.3.3, there is no gingerbreak app that works on this update, you MUST follow these directions to get root on gingerbread.
Edit: you do not HAVE to update, and I can't answer your other questions without some serious talking out my @$$
Sent from my DROID X2 using XDA App
Thanks for a quick reply. I'd rather stay where I'm at right now but it told me on the popup message that I had an hour until it would update. Do I have to postpone every hour now to avoid update?
About 30 posts down this list is one titled 'how to stop autoupdate' its got ways there
Sent from my DROID X2 using XDA App
I accidentally updated. I had the phone turned sideways and rotated and then pushed the update later button but after it rotated it was actually the update now button. I decided to let it play out, but after all is said and done, I still have the super user icon on my phone. None of the apps which require root will function but I do have the super user icon present.
Is that just a glitch?
Will it still root properly?
Is there another way to check for root access?
mikeb210 said:
I accidentally updated. I had the phone turned sideways and rotated and then pushed the update later button but after it rotated it was actually the update now button. I decided to let it play out, but after all is said and done, I still have the super user icon on my phone. None of the apps which require root will function but I do have the super user icon present.
Is that just a glitch?
Will it still root properly?
Is there another way to check for root access?
Click to expand...
Click to collapse
Super user icon is stuck now, only way to root is to flash back to 2.2.2
Sent from my DROID X2 using XDA App
And you should definately do that in my opinion, carrying the superuser icon with NONE of the benefits of being rooted? No reason for that IMO You've rooted previously so you might as well go do this right, follow the step by step intstructions on sbfing back to froyo and hitting up P3s prerooted update file, and as for explaining the stuff how technical do you want it to get... the basic idea of rooting is that its giving you access to the "root" of your phones directories/controls kinda like an administrator on the computer, the flashing/sbfing is simply swapping one or more sets of your phones programing out for another,
their are a couple boring vids on youtube that can show you the ropes of what this development actually is if you can watch a couple times without falling asleep
Yep, you have su apk, but it's not going to work.
You're going to have to sbf back to 2.2 and do the ginger break, etc process to get 2.3 rooted on your phone.
Thanks for the responses. I think I'll give this a go tomorrow. To be clear though, now that there is an sbf, there is no real danger of permanently killing the phone right? Hopefully I wont need it, but it helps knowing that I can't completely screw things up.
mikeb210 said:
To be clear though, now that there is an sbf, there is no real danger of permanently killing the phone right?
Click to expand...
Click to collapse
There is always a chance that you will be the first person to hard brick your phone, but if you soft brick yeah you can sbf back. Like I said if you hard brick you'd be the first person on these forums to do it
Sent from my DROID X2 using XDA App
Ok, as im sure this question has been asked a 1000 times over, my search turned up no results...so lets ask.
I got this phone from good ol' craigslist with the explicit request that it not be rooted. SURPRISE its rooted and the orig. owner decided to do a fac. data reset, so im none the wiser until I start messing with the phone (lesson learned, no lectures in trading phones needed).
Not only can I not find a comprehensive guide on rooting this thing, I really want a comprehensive guide on UN rooting it.. honestly I'll turn around and root it again, but Id like to know the process going both ways.
The build number is 4.5.141 Firmware Version 2.3.6
If anyone would be so kind as to point me in the right direction I'd greatly appreciate it!
also, My purchased apps are no longer registering as purchased on the Atrix, I can put my SIM back into my inspire and its all good, but the atrix says I need to pay, is this a side effect of rooting this specific phone?
gorealmighty said:
Ok, as im sure this question has been asked a 1000 times over, my search turned up no results...so lets ask.
I got this phone from good ol' craigslist with the explicit request that it not be rooted. SURPRISE its rooted and the orig. owner decided to do a fac. data reset, so im none the wiser until I start messing with the phone (lesson learned, no lectures in trading phones needed).
Not only can I not find a comprehensive guide on rooting this thing, I really want a comprehensive guide on UN rooting it.. honestly I'll turn around and root it again, but Id like to know the process going both ways.
The build number is 4.5.141 Firmware Version 2.3.6
If anyone would be so kind as to point me in the right direction I'd greatly appreciate it!
also, My purchased apps are no longer registering as purchased on the Atrix, I can put my SIM back into my inspire and its all good, but the atrix says I need to pay, is this a side effect of rooting this specific phone?
Click to expand...
Click to collapse
1. To unroot, I guess you can flash your phone back to stock.
2. Your purchases are linked to your Google account.
I had my headphone jack go bad, so I needed to make it look as stock as I could. Simply flashed the stock rom found at http://forum.xda-developers.com/showthread.php?t=1125944 for my model and was done.
To root I used the download from http://www.psouza4.com/Bionic/ and it worked perfectly.
Hope this helps.
Well, I tried one of the unroot processes or it may even been the CWM install process and I'm now the proud owner of a soft bricked Motorola
I found out that the previous owner used super one click, and as convenient as that is I hate that its all based on generic code. SO my problem has gone from unroot to unbrick. Any new suggestions? I'm getting a failed to reboot 3 message and the phone is entering rsd mode and not doing anything from that point on.
Also I know the market is linked to my Gmail, causing my confusion as to why the market on that phone is asking me to repurchase apps.
Sent from my Desire HD using XDA
So here's my story, I am not entirely new to rooting as I have successfully rooted my Motorola Droid, My Droid X2, My Acer Iconia a500 (twice), My aunts Lg something, and my mothers Kindle Fire.
So a few days ago my Droid X2 started acting up, and would go hours on end sometimes without working.
I was very happy to find out that Verizon would replace it with no hassle as it was less than a year old. I got the replacement yesterday and it's working great... that is until I found out it came stock with 2.3.5 right out of the box.
Now I have always trusted XDA forums and have used them for a long time (although I finally just registered today to ask this)
The only root method I can find is to downgrade to 2.3.4 and then root, then install voodoo root protector, then upgrade.
Now I saw a few things about possibilities of bricking your phone when trying to read those tutorials (I have never had to downgrade before) and I was a bit concerned.
I was mainly wondering, I don't care about loosing data on the phone. I have a backup sd card I can use if I need to format that, and like I said, the phone is new and actually doesnt have a single app I have installed on it yet.
Is there any easy way to go back down to 2.3.4 for my situation? I just got the free phone and don't want to brick it a day later you know?
From what I gather, you can SBF back down to 2.3.4 with no problem. There may be a certain way you have to do it though. I have never been on stock 2.3.5 so I cant tell you from experience. But Everyone says it's possible.
That's my question in a nutshell
Yeah, I read a tutorial about how to do it using RSDlite, which I downloaded to my comp.
Now what I'm cautious about is white file to use. One of the tutorials had one, now while I know a tiny bit about rooting I know NOTHING about flashing it back, I wasn't sure if there was a way that this could screw up my phone, as it seems everything tested is with a phone that had already been rooted, or if there is anything phone specific in that file, or even if it actually is an OTA original (I'd rather not mess around with anything customized right now)
Whatever is the easiest method for getting be back down, I know how to take it from there as I've done it before.
Thanks for the response though!
Excolo said:
Yeah, I read a tutorial about how to do it using RSDlite, which I downloaded to my comp.
Now what I'm cautious about is white file to use. One of the tutorials had one, now while I know a tiny bit about rooting I know NOTHING about flashing it back, I wasn't sure if there was a way that this could screw up my phone, as it seems everything tested is with a phone that had already been rooted, or if there is anything phone specific in that file, or even if it actually is an OTA original (I'd rather not mess around with anything customized right now)
Whatever is the easiest method for getting be back down, I know how to take it from there as I've done it before.
Thanks for the response though!
Click to expand...
Click to collapse
So you have never used an SBF file? If you would have used it on your broken Droid X2 when it wasnt acting right, it might have fixed your phone. An SBF file simply wipes everything of your phone (excluding your SD card) and flashes brand new software on it. The SBF files are provided by Motorola so its not like you are using something made by a dev and can break your phone easily. You should be able to use RSD lite to flash the 2.3.4 SBF file and you should be fine. But then again, I have never SBF'd from 2.3.5 to 2.3.4 personally so I would feel bad saying go ahead with no worries and something bad happen. So wait for someone else to respond first.
Thanks!
Thanks for that info!
Also, I doubt that would have fixed my old phone, it seems pretty much like a hardware issue. The screen will display static for hours on end (think like an old tv if you didnt have cable plugged in) I think it's a loose connection somewhere or something. I didn't bother to really troubleshoot it myself though because I was like "lets see if Verizon will give me a new one" and they did, and because they didnt have any "replacements" i got a brand new one, with a brand new battery, so I wasn't going to argue the fact
Anyway, if the file is from Motorola where can I get it? I saw on a verizon forum that they were not allowed to post it there (or is it "from motorola" in the sense it was leaked?)
Thanks for all your help so far, you've been great!
Excolo said:
Thanks for that info!
Also, I doubt that would have fixed my old phone, it seems pretty much like a hardware issue. The screen will display static for hours on end (think like an old tv if you didnt have cable plugged in) I think it's a loose connection somewhere or something. I didn't bother to really troubleshoot it myself though because I was like "lets see if Verizon will give me a new one" and they did, and because they didnt have any "replacements" i got a brand new one, with a brand new battery, so I wasn't going to argue the fact
Anyway, if the file is from Motorola where can I get it? I saw on a verizon forum that they were not allowed to post it there (or is it "from motorola" in the sense it was leaked?)
Thanks for all your help so far, you've been great!
Click to expand...
Click to collapse
Yeah, it does sounds like it was a hardware problem. Actually, I never thought about if motorola had a list of sbf files somewhere or if they were just leaked or what. I always downloaded them from threads like these. I just know they are made by motorola. You got me curious now. hmmm...
Duh
forget about my question as to where to get them, just saw the sticky at the front of this forum.
Although, it would be interesting to know if they were officially given out by motorola or leaked
Excolo said:
forget about my question as to where to get them, just saw the sticky at the front of this forum.
Although, it would be interesting to know if they were officially given out by motorola or leaked
Click to expand...
Click to collapse
What's An SBF File?
• SBF Is A File Leaked By Motorola That Is The System Image Flashed By RSDLite.
Taken from the Motorola Droid X2 FAQ page here
Excolo said:
So here's my story, I am not entirely new to rooting as I have successfully rooted my Motorola Droid, My Droid X2, My Acer Iconia a500 (twice), My aunts Lg something, and my mothers Kindle Fire.
So a few days ago my Droid X2 started acting up, and would go hours on end sometimes without working.
I was very happy to find out that Verizon would replace it with no hassle as it was less than a year old. I got the replacement yesterday and it's working great... that is until I found out it came stock with 2.3.5 right out of the box.
Now I have always trusted XDA forums and have used them for a long time (although I finally just registered today to ask this)
The only root method I can find is to downgrade to 2.3.4 and then root, then install voodoo root protector, then upgrade.
Now I saw a few things about possibilities of bricking your phone when trying to read those tutorials (I have never had to downgrade before) and I was a bit concerned.
I was mainly wondering, I don't care about loosing data on the phone. I have a backup sd card I can use if I need to format that, and like I said, the phone is new and actually doesnt have a single app I have installed on it yet.
Is there any easy way to go back down to 2.3.4 for my situation? I just got the free phone and don't want to brick it a day later you know?
Click to expand...
Click to collapse
bro, you wont have any problems downgrading/sbfing back to 2.3.4, i did it without any problems
i used sbf_flash through linux though idk about RSDLite