Related
Does anyone know anything about this case? It's not showing up on the Case-mate website, but they have it here in stock ready to ship. Has a kickstand and I was just wondering if anyone has this or has any more info on it.
19.99 + 3.95 shipping. Not bad. It's selling for 29.95 everywhere else. I'm going to buy it, but I was just hoping that someone that if someone has it I can know what to expect. Thanks guys!
i just saw this yesterday on ebay, but i do not like the front back snap of the case, i bought the $35 Platinum with kickstand from best buy instead. The kickstand isn't the best, but the case slides on top and bottom, much more secure against drops. Plus its the exact case that seidio is going to release, they make the Platinum series for best buy. Doesn't bother me that i can't charge while in kickstand mode, maybe there will be "slim-head" chargers to accommodate for it in the future.
just got in my casemate tough, pop, barely there. pop is easily the worst of the bunch.
-pros
feels more durable than the tough
kickstand
-cons
thicker than tough
black and gray accents not really nice looking, imo
kickstand is a small flimsy piece of plastic. looks VERY easy to break
-worst con
dont know if it was just me but once i stuck my 3d in, it couldnt come out. was prying on my evo3d for 5 mins to get it out, back cover actually popped off while still in case. had to pry off that very carefully since it was so thin it might break.
itsallsubliminal said:
i just saw this yesterday on ebay, but i do not like the front back snap of the case, i bought the $35 Platinum with kickstand from best buy instead. The kickstand isn't the best, but the case slides on top and bottom, much more secure against drops. Plus its the exact case that seidio is going to release, they make the Platinum series for best buy. Doesn't bother me that i can't charge while in kickstand mode, maybe there will be "slim-head" chargers to accommodate for it in the future.
Click to expand...
Click to collapse
Thanks for this.
chotabk said:
just got in my casemate tough, pop, barely there. pop is easily the worst of the bunch.
-pros
feels more durable than the tough
kickstand
-cons
thicker than tough
black and gray accents not really nice looking, imo
kickstand is a small flimsy piece of plastic. looks VERY easy to break
-worst con
dont know if it was just me but once i stuck my 3d in, it couldnt come out. was prying on my evo3d for 5 mins to get it out, back cover actually popped off while still in case. had to pry off that very carefully since it was so thin it might break.
Click to expand...
Click to collapse
Thanks. Sounds like this isn't a very good case. I'm glad I got it for $20. I will buy another if I don't like it, but from your description it sounds like I won't. I like to be able to easily get my phone out of the case. I also have a TPU case on the way. I do like to be able to easily interchange cases depending on what I am doing and if it is really that hard to get it out if this thing I think it may be a dust collector.
I saw it at the sprint kiosk yesterday. It didn't look too appealing. Looked like it had a rubber sleeve that fit inside the actual case part. The kickstand looked cheap. And it was 40 bucks! The guy pulled out like 15 cases. I walked away with the smoke honeycomb tpu case. Fits like a glove.
Sent From The Second SHOOTER On The Grassy Knoll!
They start to look like crap after a week or 2. The silicone starts peeling and cracking and stretches out. I went through 2 replacements before finally getting my money back. This was for my Thunderbolt though.
Had one on my hd2, scratched the hell out if it. Also the corners cracked off. Will never buy case mate again
Sent from my 3rd Dimension of Evolution
my wife just got hers in the mail 2day and this bad boy is sweet! tight as hell also to hold the phone!!! the power button is harder to press...awesome!!
anyway here are pics!
more pics................
HTCRALEIGHFAN said:
more pics................
Click to expand...
Click to collapse
thx for the pix
it looks sharp, although i do not like the front/back snapping of the case - i prefer top/bottom, but it looks thick as hell compared to my platinum/seidio. wish we could get a side by side shot
Case Mate Pop! Shell Case for HTC EVO 3D (White & Grey)
i just rcvd my case,it does seem sturdy and a tight grip on the phone,but its a tad bulky for me,i will be selling the case.its like new,i just tried it out on the phone and took it off.PM if anyone is interested.
itsallsubliminal said:
thx for the pix
it looks sharp, although i do not like the front/back snapping of the case - i prefer top/bottom, but it looks thick as hell compared to my platinum/seidio. wish we could get a side by side shot
Click to expand...
Click to collapse
It's one piece, not a snap on. Search YouTube for EVO 3d pop case for a video of it.
It does look pretty thick...
Sent from my PG86100 using Tapatalk
vudu said:
It's one piece, not a snap on. Search YouTube for EVO 3d pop case for a video of it.
It does look pretty thick...
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
ahhh i see the light now!!! I was totally under the impression it was a 2-piece..
well, that puts the pop-case up +1 in my book...
whoops, -1 for being thick still...
back at 0
The only case I've ever had that I liked better then the casemate pop is the Speck CandyShell. I dont see the point in leaving the sides pure silicone, I'd like to see it completely enclosed like the candyshell is. Speck must have a patent on that design or something because no one else ever makes them like that. I wouldn't be surprised to see Speck put one out for the Evo 3D either. But this White/Grey Casemate Pop is sick.. it really is. Highly recommend it. Only downside so far is it does add some weight and it doesnt fit in the iGrip dock like my TPU cases will.
doraiders said:
i just rcvd my case,it does seem sturdy and a tight grip on the phone,but its a tad bulky for me,i will be selling the case.its like new,i just tried it out on the phone and took it off.PM if anyone is interested.
Click to expand...
Click to collapse
I should be receiving mine tomorrow. I've noticed any case with a kickstand is bulky. I tried the Platinum one from BB and it added bulk as well but the kickstand was flimsy. Even from the pix I've seen, the official HTC case looks bulky. It might just be something we have to live with if we want a kickstand on this phone. I had a nice red Amzer snap-on case for my OG Evo and it felt like nothing was added to the phone. If they can make one like that with a kickstand, we'd be good to go.
Anyone noticed that when using the kick stand, the charging port goes to the bottom? Not a huge deal but for those who watch lots of youtube or movies...
Sent from my PG86100 using XDA App
st0921 said:
Anyone noticed that when using the kick stand, the charging port goes to the bottom? Not a huge deal but for those who watch lots of youtube or movies...
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
u know what iam glad its on the bottom....peeps would ***** and moan if the camera buttons were on the bottom also. adapt and overcome!
Sent from my PC36100 using XDA Premium App
With the new pics and people posting their reviews that actually have the case I am glad I bought this now. I bought the black and grey one and it hopefully will be here late this week or early next week. It just shipped yesterday and the estimated delivery is the 13th, but I think it will be here before that. I will post pics of the black and grey one when I get it.
itsallsubliminal said:
ahhh i see the light now!!! I was totally under the impression it was a 2-piece..
well, that puts the pop-case up +1 in my book...
whoops, -1 for being thick still...
back at 0
Click to expand...
Click to collapse
its not that bulky! with this case its just a lil wider then the 4g
Sent from my PC36100 using XDA Premium App
I have been looking for some decent book like cover/folio cases (preferrably thin and minimalistic) and the ones on the BN store are quick pricey but fit the bill. Anyone tried these and confirm their quality?
antonyfl said:
I have been looking for some decent book like cover/folio cases (preferrably thin and minimalistic) and the ones on the BN store are quick pricey but fit the bill. Anyone tried these and confirm their quality?
Click to expand...
Click to collapse
Try JavoEdge covers at Amazon.com
hwong96 said:
Try JavoEdge covers at Amazon.com
Click to expand...
Click to collapse
Pricey as well. Would like the b&n covers with the snap on holder instead of the flap holder. Anybody find one at a discount?
I have the "Leather writer's cover" from B&N for my NT. It's really nice. The thing I like about the official covers are that the mounts are solid and non-intrusive. I can carry it around like a book. It looks (& feels) as nice in person as it does in the B&N photos.
The third party covers don't have those solid mounts, they have either cheap straps for the corners or have leather that cover all of the bezels.
Btw, I had a "Canvas writer's cover" before, for my Nook color. It wasn't bad, didn't feel as good as the leather, and was slightly heavier. Kinda felt like rubber coated canvas, whereas the leather cover just feels like normal leather.
Currently imlooking for something like the lautner case on BN. With the magnetic clasp
Speck Fitfolio case
i just bought this from Target for 29.99 for my nook tablet. I love it! Speck Fitfolio in black sweet!
antonyfl said:
I have been looking for some decent book like cover/folio cases (preferrably thin and minimalistic) and the ones on the BN store are quick pricey but fit the bill. Anyone tried these and confirm their quality?
Click to expand...
Click to collapse
Best Buy has a M-Edge incline cover like Ipad2's in navy blue on sale for $30.
oldsv6 said:
i just bought this from Target for 29.99 for my nook tablet. I love it! Speck Fitfolio in black sweet!
Click to expand...
Click to collapse
Couldn't find it on target but found it on amazon. Looks good.
http://www.amazon.com/Speck-Product...TF8&coliid=I3KMK3WORPWROT&colid=220ODX6L6ZJNO
Cheaper too. $19.50.
Actually oldsv6, can you tell me if the speaker is blocked or if there is like a gap so the sound isn't muffled. Also how tight is the grip of the case? I want put a skin over my nook and hopefully it will still fit in the case. Thanks.
It was not on Targets website but store by me had all three colors. This is no opening for the speakers, however, there is a space near the usb and it acts like a port for sound. The sound level is only stlighly decreased if any.
I think I will have to go with one of the BN official cases sigh.
im torn between the Brunel : http://www.barnesandnoble.com/p/brunel-cover-in-iron/20831286?ean=9781616837327
and the Lautner: http://www.barnesandnoble.com/p/lautner-book-cover-night/19952457?ean=9781616865146
Since I hate twilight, I am leaning towards the brunel (lol not really) but Lautner is a bit cheaper. Maybe I should wait until there is a sale on cases
YMMV, but Best Buy in store is selling a Black M-Edge Go! Jacket model for $15 on clearance . I picked up one today. A couple of caveats though...
First, there is no hole in the back so the speakers are covered. If you are using the headphones that's not much of a problem since all other ports are available.
Second the fit is VERY tight, so getting the unit in and out easily is a problem. Once in it's super nice and snug, but I tend to like to remove the tablets from their cases when using most of the time. I am actually going to perform surgery on my case and remove the part along the top so I can slide my tablet in and out easily. The rubber back on the tablet and velvety insides should hold everything in fine by friction. At the price I think it's not a bad gamble to modify it...
hwong96 said:
Best Buy has a M-Edge incline cover like Ipad2's in navy blue on sale for $30.
Click to expand...
Click to collapse
I tried two M-Edge cases for Nook Color/Tablet, but they both covered the speaker, so the audio was muffled. They also covered the mic hole at the top edge, so if you want to use the mic, you have to take the device out of the case. However I do like their constructs - compact, slim and solid.
---------- Post added at 07:38 PM ---------- Previous post was at 07:34 PM ----------
aarrgus said:
YMMV, but Best Buy in store is selling a Black M-Edge Go! Jacket model for $15 on clearance . I picked up one today. A couple of caveats though...
First, there is no hole in the back so the speakers are covered. If you are using the headphones that's not much of a problem since all other ports are available.
Second the fit is VERY tight, so getting the unit in and out easily is a problem. Once in it's super nice and snug, but I tend to like to remove the tablets from their cases when using most of the time. I am actually going to perform surgery on my case and remove the part along the top so I can slide my tablet in and out easily. The rubber back on the tablet and velvety insides should hold everything in fine by friction. At the price I think it's not a bad gamble to modify it...
Click to expand...
Click to collapse
AARRGUS, please post it when you find out how to drill/punch holes on the back cover to allow the audio come out. I like the case but it covers the speaker and the mic (at the top).
So I just received the Lautner case and Ill give it a quick review
the faux leather isnt as nice as i was expecting for a 35 dollar cover, but its clean, the clips are sturdy and the magnet is nice.
B
found one on ebay that acts as a stand for portrait mode, pretty cheap around 10 dollars or so.
its called Premium PU leather Stand case Pouch Cover For Nook Tablet E-reader, sold by everydaysource, can i get some feedback on this product from you guys? thanks!
I purchased the Brunel cover in Iron from BN (I can't post links as of yet).
I like it a lot. The clips are very sturdy and the magnet keeps it closed. It can be propped up for viewing in landscape mode. The pocket on the inside of the cover flap is also handy. You do need to take it out of the cover in order to access the sd card. Audio sounds fine/clear while in the cover.
I haven't scuffed the leather yet, it's been tossed in and out of my purse for the past few days (got the NookTab this past Tuesday).
Anxiyz said:
I purchased the Brunel cover in Iron from BN (I can't post links as of yet).
I like it a lot. The clips are very sturdy and the magnet keeps it closed. It can be propped up for viewing in landscape mode. The pocket on the inside of the cover flap is also handy. You do need to take it out of the cover in order to access the sd card. Audio sounds fine/clear while in the cover.
I haven't scuffed the leather yet, it's been tossed in and out of my purse for the past few days (got the NookTab this past Tuesday).
Click to expand...
Click to collapse
I'd maybe consider this, but I wonder if I'd want something that could prop up in portrait too.
thatdude90210 said:
I have the "Leather writer's cover" from B&N for my NT. It's really nice. The thing I like about the official covers are that the mounts are solid and non-intrusive. I can carry it around like a book. It looks (& feels) as nice in person as it does in the B&N photos.
The third party covers don't have those solid mounts, they have either cheap straps for the corners or have leather that cover all of the bezels.
Btw, I had a "Canvas writer's cover" before, for my Nook color. It wasn't bad, didn't feel as good as the leather, and was slightly heavier. Kinda felt like rubber coated canvas, whereas the leather cover just feels like normal leather.
Click to expand...
Click to collapse
I also picked up the Leather writer's cover. It looks and feels great and has a nice pocket on the inside cover to slip a thin Moleskine journal style notebook into. I picked up the notebooks in a 3 pack with a thick paper cover and they slip in with a bit of trimming to one cover. I can't remember exactly what their called but you'll see them if you go into a BN store and check out the Moleskine rack. It's good for doodling or taking down notes.
I had the canvas cover before this and when I used it at a coffee shop, it picked up the cookie grease/oil from the table top and stained permanently. The leather option is much better.
slim case
I need a real slim case. One of the things I love about the Book is how I can slip into a pants pocket. The bulky cases at BN make this impossible. Anybody find a slim case with front flap?
I got the Tasume cover from B&N...its rather pricey at $50, but it's nice. It tri-folds over the screen for good protection, and the flaps fold origami-syle to prop the tablet up in either portrait or landscape.
Sent from my Nook Tablet using (((sonicboom)))
pdl1 said:
I need a real slim case. One of the things I love about the Book is how I can slip into a pants pocket. The bulky cases at BN make this impossible. Anybody find a slim case with front flap?
Click to expand...
Click to collapse
Perhaps look into the Speck Fit-Folio
https://www.speckproducts.com/fitfolio-for-nook-tablet.html
Just wanted to let folks know that silicon cases are now up on Amazon. Already ordered me one!!!
http://www.amazon.com/gp/browse.html?ie=UTF8&marketplaceID=ATVPDKIKX0DER&me=A3SQAI9BQY42F6
Just ordered mine Batfish Blue.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Ouch. Almost $28.00. Not Sure I like them. From the pic, it makes tablet bulky. ?
NJ_RAMS_FAN said:
Ouch. Almost $28.00. Not Sure I like them. From the pic, it makes tablet bulky. ?
Click to expand...
Click to collapse
Hey confused, I think it depends on what you are looking for.
Yeah, it adds a little thickness, because it is not a "skin". I got it 'cause it is heavy duty drop protection. I love it. I think it gives me better protection than my [big name] drop case, and it was about half the price. And I don't lost the sensitivity of my screen like I did with my other one, cause this one fits with my own screen protector. So my big-name case is going on ebay after trying this one.
If you just want a decorative skin, go for something else, like a "skinit" or a "decalgirl". If you want something to protect your TF, this is the best one I have tried. Since my TF300 does not have gorilla glass, I got this for when the grandkids are using my TF.
I received mine a couple of days ago. Love it.
rjs3 said:
Hey confused, I think it depends on what you are looking for.
Yeah, it adds a little thickness, because it is not a "skin". I got it 'cause it is heavy duty drop protection. I love it. I think it gives me better protection than my [big name] drop case, and it was about half the price. And I don't lost the sensitivity of my screen like I did with my other one, cause this one fits with my own screen protector. So my big-name case is going on ebay after trying this one.
If you just want a decorative skin, go for something else, like a "skinit" or a "decalgirl". If you want something to protect your TF, this is the best one I have tried. Since my TF300 does not have gorilla glass, I got this for when the grandkids are using my TF.
Click to expand...
Click to collapse
haha. Not sure why I put consufed smiley. lol. I guess. I personally like no case at all but once in a while my daughter uses it. that's not the case no more since I a smaller tablet (tab 2) for her.
Here's mine. All the buttons and slots are perfectly accessible. Fit's nice and snug and feels good in the hands.
My only gripe is the red is a bit on the pinker side then I would like [picture below looks really pink... it's a little more actual red to my eyes in person]. Gonna order a black one in the future.
jawa5636 said:
Here's mine. All the buttons and slots are perfectly accessible. Fit's nice and snug and feels good in the hands.
My only gripe is the red is a bit on the pinker side then I would like [picture below looks really pink... it's a little more actual red to my eyes in person]. Gonna order a black one in the future.
Click to expand...
Click to collapse
Thank you for posting the screenshot. I thought it might be flimsy around the edges but it looks like it hugs the device tightly. I ordered one. Should come in the mail today.:good:
No offence but it looks fugly
I Just got mine (black) and its nice. Its thick around the bezel maybe 1/2 inch but its really not bad. It fits snug and does add some weight.all the openings lines up perfect. I like it better than the folding cases, this and a screen protector and your good to go. I dont think it matters what case you have, if you drop your tablet your screwed. But this will prevent scratches and dings for sure
Yesterday my grey one was delivered too. I like it a lot. Finaly i have a good grip on the tablet now. Did you all notice the strap on the back where you can put in your hand so you even have more grip? Very nifty! :good:
Just received the following fake "suede" sleeve I bought off Amazon:
http://www.amazon.com/gp/product/B007W4KLDI/ref=oh_details_o00_s00_i00
It's about $12.00 shipped, so not too expensive. It's very nice, though, very classy looking and the TF300 fits in snugly with its keyboard dock. Suede does tend to pick up dirt, so I'm not sure how well it will keep clean, but all in all, I'm very pleased (that's my reviewon Amazon, too).
Suede may not be your thing, but if it is, then this is your sleeve.
dsf3g said:
Just received the following fake "suede" sleeve I bought off Amazon:
http://www.amazon.com/gp/product/B007W4KLDI/ref=oh_details_o00_s00_i00
It's about $12.00 shipped, so not too expensive. It's very nice, though, very classy looking and the TF300 fits in snugly with its keyboard dock. Suede does tend to pick up dirt, so I'm not sure how well it will keep clean, but all in all, I'm very pleased (that's my reviewon Amazon, too).
Suede may not be your thing, but if it is, then this is your sleeve.
Click to expand...
Click to collapse
Im not a real fan of putting my tablet into a bag
Renegade99 said:
Im not a real fan of putting my tablet into a bag
Click to expand...
Click to collapse
If the T300 were a pure tablet like the iPad or the Galaxy tab, I'd agree with you and would probably have bought a slim folio cover that opens up like a book. But every cover like that that I've seen that tries to accommodate the keyboard dock just looks like a complicated mess.
dsf3g said:
If the T300 were a pure tablet like the iPad or the Galaxy tab, I'd agree with you and would probably have bought a slim folio cover that opens up like a book. But every cover like that that I've seen that tries to accommodate the keyboard dock just looks like a complicated mess.
Click to expand...
Click to collapse
Try the origami sleeve it hooks into where the keyboard locks in.
Here is my quick review of the new Incipio DualPro Case. First I want to say sorry for the blurry pics. Wasn't taken with the best camera, but I wanted to get this up now.
Right off the bat this case feels great. It's almost gel-like. It's made of a hard shell, and very soft inner part, but both feel the same. It's like a feltish feel. Reminds me of the Nexus One's back. Even though it was hard plastic, it had that soft touch feel to it. The buttons are extremely easy to press thanks to the soft inside material being the cover instead of the hard outer shell, or individual pieces like the Spigen Neo-Hybrid. The overall thickness is also less compared to both the Neo-Hybrid and the Spigen Slim Armor. It almost feels like the naked phone without a case.
The cutouts are spot on too. Just like the Slim Armor. No complaints overall. Again the headphone port has a deep cutout, so you will need an extension, or just use headsets with thin jacks. Anything larger than the headphones that came with it won't fit. The camera is tucked in just enough, so there is no fear of it contacting any surface when put down, and the front is thick enough to protect any sort of surface if laid face down. I'm really happy with this case. For me it's a toss up between the Slim Armor and this with the Neo-Hybrid last. Both the Slim Armor and DualPro feel great in the hand, but the DualPro feels a bit better with the super soft touch feel. Great case that you can't go wrong with. The color is Cyan.
http://www.incipio.com/cases/samsung-smartphone-cases-accessories/samsung-galaxy-note-3-cases.html
More pics.
Even more pics.
bobbyphoenix said:
Even more pics.
Click to expand...
Click to collapse
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
phiquantu said:
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
Click to expand...
Click to collapse
This is the only case so far that I'm really having an easy time holding. The Slim Armor was the best I thought, but this one is just a perfect increase in size over the naked phone. The rubbery texture is more than enough to grip. When you first put it on it may feel a bit slippery, but it's just the talcom powder they use in the molds for the silicone to be easy to get out. I wiped mine down, and now it's a soft rubbery grippy feeling case. I really like it a lot. Plus the sides are curved. There are no corners that you need to grip against like the Neo-Hybrid or Slim Armor. It's a very natural feeling to hold it since your fingers wrap the entire case. One bonus feature I found for me is the entire bottom is the very soft inner case, and the way I hold the phone I tend to put my pinky under the bottom as a brace. The soft gel really is easy on my finger. The other two case are hard on the bottom, and I would have to keep moving my pinky to stay comfy.
james_f said:
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
That's a good additon to mention. The top and bottom are both just the soft inner case. There is no hard outer shell to keep it pressed against the phone, so if you tend to put it in your pocket I can see it getting caught and pulled when you try to pull it out, but overall with it being on the case and used, it doesn't "wobble or flipflop" by itself. It's stiff enough to stay put, but easy enough to pull away with a slight tug.
Ah yeah I wasn't clear. It stays put until it snags coming in and out of my pocket. It's merely an annoyance.
My favorite thing about the case is how comfortable it is. Holding the phone naked now feels sharp and uncomfortable.
Sent from my SM-N900V using Tapatalk
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
stanglifemike said:
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Link added to OP.
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
zmore said:
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
Click to expand...
Click to collapse
I'm special. LOL Yeah just as your edit said. I check sites daily, and when I see them in stock I order ASAP. That's how I get all my case in before everyone. I check first thing in the morning (around 8). I find I can order in the morning with "in stock" stuff, and by afternoon they are already out of stock.
I picked up my black case at a Verizon corporate store
Sent from my SM-N900V using Tapatalk
I picked up a DualPro SHINE, Brushed silver color, from the Verizon store, They were able to pick up the day note3 came out. They still sell them, It's a the best over the counter case you can get IMHO at the moment.
How does this case compare to the spigen bounce? I just ordered the bounce to try it out.
I loved this case on my SG4 but it was a Lint & Dust magnent. I think there is a correlation with most cases....the grippier the case...the more dust and lint it will attract. Just got a UAG case for my new note 3 and it sits perfectly inbetween Grip and Lint spectrum!
Just ordered mine from amazon. How easy / not easy is it to quickly take off and put back on? Like if I wanted to swap batteries in my phone, would it be this whole ordeal? Thanks
Sent from my DROID RAZR using xda premium
It's very easy. One of the best cases if you need to do that. When it's on it's on good, but no fear of breaking something if you have to take it off.
Sent from a Galaxy Note 3 far, far away....
My older brother had the Shine version of the Incipio DualPro for his Galaxy Note II and it was pretty bulky with no easy way to take it off. I have the Spigen Slim Armor for my Galaxy Note 3 and considered it superior until I noticed a crack in the armor yesterday. It has never been dropped so I am pretty sure that it was caused by taking the phone in and out daily. I do this carefully one side at a time and push through from behind (camera opening) but it happened anyway. I would hope that the Note 3 version of the DualPro is easier.
Also, it was rounded so it probably wouldn't fit a flat metallic plate insert like the nGroove Snap uses. He also tried it with a Qi wireless receiver I sent him and it doesn't work through the case. I hope the Note 3 version is thinner.
Sent from my SM-N900T using Tapatalk