I am running TnTLite 4.4 which I am absolutely enjoying but I was unable to get the USB slot to read a thumb drive. Is there a work around for this?
brown14you said:
I am running TnTLite 4.4 which I am absolutely enjoying but I was unable to get the USB slot to read a thumb drive. Is there a work around for this?
Click to expand...
Click to collapse
I found that re-booting, with the usb device already attached, usually fixs it or, going into file explorer and issuing a 'refresh' command.
what if format for USB drive. Try formatting as FAT32. Tab does not like NTFS
Rumbleweed said:
what if format for USB drive. Try formatting as FAT32. Tab does not like NTFS
Click to expand...
Click to collapse
Rumbleweed said:
I found that re-booting, with the usb device already attached, usually fixs it or, going into file explorer and issuing a 'refresh' command.
Click to expand...
Click to collapse
Thanks for all your suggestions. I will give it a try.
Did you enable USB access on the gtab? I know I had to do that on the Vegan rom. The usb will detect but you still need to enable it for use.
How do you enable it? Or do you mean turning on usb debugging.
Can't get my seagate ntfs 350gb to be recognized... gonna try reformat
Sent from my SPH-D700 using XDA Premium App
Related
after i fortmated A70IT (use Reformat Device in Boot menu), it cannot connect to PC. So i can't copy firmware to upgrade.
Pls help me, how can connect A70IT to PC?
Thanks all.
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
msticninja said:
When you select Upgrade Firmware in the Recovery Menu, it doesn't show up on your PC?
Click to expand...
Click to collapse
yes. Sometime, show the warning request fortmat Disc I: ( disc of A70) but can't format it. The warning only show in few second and then disappear.
Having trouble with the translation. If you can still get into the Boot Menu, but the ram disk doesn't show up when you select Update Firmware, it sounds like there's some hardware trouble. I'd try to contact support. Someone else may have some ideas, as well.
Thanks all, i found my problem. The cable was broken so i bought the new cable. it's ok.
I installed SDE, UrukDroid 1.0 successfull.
Now, it can not read the SDcard, who can help me this problem?
fgc_vn said:
Now, it can not read the SDcard, who can help me this problem?
Click to expand...
Click to collapse
Does the card works on your pc?
if yes, reformat it and try it on your archos.
if no, your card is propably broken..
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
Don't format NTFS, it's not supported on every FW version. Make sure the partition table in MS-DOS type, and make sure the storage scheme on the A70 is set to Fat, not Ext3.
fgc_vn said:
yes, it working on PC very good, i formatted many on FAT32 and NTFS but when insert to A70, it not works.
Click to expand...
Click to collapse
So the usb ports are definitley working, must be card?
davemon said:
So the usb ports are definitley working, must be card?
Click to expand...
Click to collapse
Usb ports? We're talking about the SD Card slot I thought...
I can connect to my "Siyah Kernel" Galaxy S2, which allows me to connect my mouse to my phone. But whenever I try to connect my USB stick, I don't see anything in the Root Explorer.
Is there a special place I need to look to access my 16 GB memory stick?
try
mnt/usbdisk
But if you have formatted stick to NTFS, look at /mnt/ntfs.
przemcio510 said:
But if you have formatted stick to NTFS, look at /mnt/ntfs.
Click to expand...
Click to collapse
That's it. Thanks!
hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
ycharan said:
hey after flashing cm10.1, I cannot able to detect my usb drive. It's neither shown in sdcard/0/extStorages, nor in ESExplorer usb drive after granting super user permissions. I could able to connect my tab to pc using mtp but usb is a no go. Thanks in advance...
Click to expand...
Click to collapse
You sghould take a look in /mnt/usbdrive/...
lightman33 said:
You sghould take a look in /mnt/usbdrive/...
Click to expand...
Click to collapse
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
ycharan said:
I got it....Actually its my mistake... I didnt check my usb is in ntfs format.... So I converted into Fat and I got it...
By the way is there any method to connect the usb drive with ntfs forrnat.. if it does then I hope we can connect our external hard disk too... that would be great...
Click to expand...
Click to collapse
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
thanks
lightman33 said:
for ntfs filesystem, maybe you need tools like paragon ntfs or ntfs mounter.
if you need storage for files files greater than 4go, you could also use ext4 file system which are usable with windows PC.
Click to expand...
Click to collapse
thanks... i will try that...
Hello, I am having a problem getting my galaxy tab 10.1 to recognize a usb flash drive I have connected via an adapter. I know it works because it detected a wireless mouse I connected to it, and it shows up when I use dmesg or lsusb in the terminal. The thing is that none of the file explorers I've used (Es, Astro) are able to detect the files I have on it. The usb drive is formatted to fat32; would it be more likely to detect it if I formatted it to ext3 or ext4?
Maybe you need to use this?
RoberGalarga said:
Maybe you need to use this?
Click to expand...
Click to collapse
Thanks so much for showing me that! I went through at lest five other apps that didn't work before trying this. :victory:
Es explorer in my nexus 9 can read and write usb2.0 pendrives bt whenever i use usb 3.0 pendrive it doesn't support it. Nexus usb file manager can read usb3.0 pendrive bt cant write in it. Is there any app to write data on usb3.0 pendrives for nexus 9
hasan10001 said:
Es explorer in my nexus 9 can read and write usb2.0 pendrives bt whenever i use usb 3.0 pendrive it doesn't support it. Nexus usb file manager can read usb3.0 pendrive bt cant write in it. Is there any app to write data on usb3.0 pendrives for nexus 9
Click to expand...
Click to collapse
If it can read from the drive but not write then its probably a filesystem problem rather than a USB problem.
It sounds like your USB3.0 drive is using the NTFS format. If thats the case, the easiest fix would be to reformat it to FAT32.
No. It was formatted as fat32. I checked it.
Dr. Hurt said:
If it can read from the drive but not write then its probably a filesystem problem rather than a USB problem.
It sounds like your USB3.0 drive is using the NTFS format. If thats the case, the easiest fix would be to reformat it to FAT32.
Click to expand...
Click to collapse
I rechecked it. Then again formatted it. Still it doesn't work. But usb3.0 pendrive works fine in my friends chinese phone.
hasan10001 said:
I rechecked it. Then again formatted it. Still it doesn't work. But usb3.0 pendrive works fine in my friends chinese phone.
Click to expand...
Click to collapse
Not sure but try stickmount by Chainfire. Need root. Won't write to NTSF.
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
prdog1 said:
Not sure but try stickmount by Chainfire. Need root. Won't write to NTSF.
I was hoping that i wouldnt need to root. Usb mouse and keyboard works fine without root.
I guess i'll stick to usb2.0 for a while.
Click to expand...
Click to collapse
This might sound strange, but is the USB OTG cable you're using specifically made for USB 3.0?
I've had trouble with those cables which would, surprisingly, work only with USB 2.0 drives.
Replacing the cable with an older USB 2.0 cable fixed the problem and worked fine with my USB 3.0 HDD !!
Try getting another cable.
Dr. Hurt said:
This might sound strange, but is the USB OTG cable you're using specifically made for USB 3.0?
I've had trouble with those cables which would, surprisingly, work only with USB 2.0 drives.
Replacing the cable with an older USB 2.0 cable fixed the problem and worked fine with my USB 3.0 HDD !!
Try getting another cable.
Click to expand...
Click to collapse
I don't think cable is the problem. Same cable and pendrive work in my friend's mobile
But not in mine.