so i dont really know how to use adb, which is the primary method from this post. so it said i could just copy these files into my /system/apps folder using Super Manager. i did this. it says "no install". when i click each apk and click install it doesnt work. does this have to do with permissions? and how do i set the permissions?
install CWM from the post you had in method 2 (http://forum.xda-developers.com/showthread.php?t=1019143), which can be installed straight from your phone. you must be rooted. then, download the webtop ZIP from that same post (http://forum.xda-developers.com/attachment.php?attachmentid=558897&stc=1&d=1301785902) and put it on your phone's internal SD card (the onen that says MB860 when you plug in to USB to your computer).
follow the instructions to install CWM properly and reboot into recovery mode, run from ZIP, select the webtop ZIP, and you're done.
all these steps are gone into more detail in the thread you linked to.
i did this. installed cwm. booted. found zip, clicked install.
says.
-- Installing: SDCARD:CWM-ATT-4.1.57.zip
finding update pacakge...
opening update package...
installing update...
E: syntax error in update script
Installation Aborted
i even tried putting the zip in the internal sd card (idk what the difference is, feel free to educate)
and same thing happened except now is says
--Installing: SDCARDINTERNAL instead of just SDCARD
also, nothing happens when i plug in my hdmi cable cuz the apks say "no install"
how can i install these! or get the script to work!
did you replace your original apks when you copied them over with super manager? when you plugged in the HDMI cable before everything, did it work (at least the entertainment center output)?
well i just recently flashed to 4.1.26. so it was working then.
then, yes, i copied the files over with super manager, which is when plugging the hdmi cable stopped working. so i then tried the cwm and it failed. do you think its because i had copied the files over with super manager?
is there a way i can just install the file? the right ones are there they just won't install
also im noticing that my wifi is buggy. like it'll say connected but wont have a connection. is this from flashing to 4.1.26? wouldnt updating to 57 have fixed this? i have to literally turn off wifi to allow the phone to use over network instead.
still stuck with hdmi prob too, dunno if this effected it, but after i flashed i used titanium backup to restore all the files. would this have reapplied whatever was buggy? it still let me update after i did the backup (in .26) so i assume whatever was stopping me from updating wasn't reapplied.
but still nothing when i plug in hmdi cable
The CWM will not work on the newest version of tenfar's CWM port. Koush removed amend support and now it only supports edify. Amend was deprecated as of Android 1.5. Fenny's mod uses this old method and will need to be updated to support edify.
greek to me? sooo should i find an older version of tenfars CWM?
i tried all different versions of tenfars cwm that are posted on his thread. none work
VM0824 said:
i tried all different versions of tenfars cwm that are posted on his thread. none work
Click to expand...
Click to collapse
MOTOA4_Bootstrap_0404_1755-signed.apk should work.
it doesnt same error
so i think i successfully installed adb. went to the command prompt and typed in some of the codes. i didnt bother with the 4 lines which rename the current files for backup since ive already copied over them a couple of times trying to manually move the files. but successsfully copied the 2 apk's, the rebooted. STILL says "no install"
Related
Hey everybody,
I apologize in advance if this post is a duplicate but I have tried searching for a solution and still lost. Here is what I did: I used the Odin to restore stock rom, then re-rooted using the one click method, then downloaded a rom from theunlockr.com, then used rommanger to install it. My rom has gave me no problems but now when I try to reboot into recovery to install something else(Like the 2.3 keyboard or a lagfix) i get this error:
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
Can someone please help me? Thank you, BTW I have a Samsung Vibrant running axura-froyo-rom
I had the same problem too.
When I put update.zip at the root directory of internal memory... once I restart the phone (not get into the recovery mode), this file is missing / dissapear. So... I always got this message too :
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
anybody can help us pleaseeeeee
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
CarlosCruz15 said:
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
Click to expand...
Click to collapse
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
mikomikos said:
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Click to expand...
Click to collapse
check out this link...its what i used
http://forum.xda-developers.com/showthread.php?t=734475
listen to s15's post....he knows what he is talking about. i followed his noob guide in his sticky and everythign worked perfectly! his vids are also very helpful. one thing i have found that works a lot as well is if you download ROM Manager from the market and then click on "fix permissions"... don't know if this would help in this situation but i have had that fix weird stuff.
s15274n said:
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
Click to expand...
Click to collapse
yeah this, the update.zip is ESSENTIAL for your phone to run the clockwork recovery, it stores all the things needed, and when you click "reinstall packages" your system goes in update.zip and looks for what to boot up and finds CWR and boots that so you see that screen.
Don't delete it if you did.
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Rayn1328 said:
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Click to expand...
Click to collapse
When you usb into your phone it needs to be in the initial area of your sdcard.
You might have a bad update.zip file. Two things, verify the md5(if possible) from where you got it and check the properties and make sure it's not names update.zip.zip. The later is very common.
Try this method too btw, when I Odin back to stock I always use this one to root again. Follow the 'Automated Method' area.
http://forum.xda-developers.com/showthread.php?t=786877
you will need these drivers AND set your phone to debugging mode (settings/applications/development check USB debugging).
http://forum.xda-developers.com/showthread.php?t=728929
hey all,
Newbie here trying to flash a ROM, i am running into this same error, i have tried everything here and i have one question (might be a stupid question) but my root sd folder is called SD/, not SDCard/ ...is this a path error?
Please note it file must be in the internal card, not the SD card.
This step drove me nuts.
"2. Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/ " (http://forum.xda-developers.com/showthread.php?t=732458)
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
janthe6th said:
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
Click to expand...
Click to collapse
You definitely have an internal sd card. Use Astro file manager or something similar and put update.zip on the root of internal sd card, meaning not in a folder. It should look like sdcard/update.zip. If you are having the 3e mismatch recovery issue read this http://forum.xda-developers.com/showthread.php?t=833423
Sent from my SGH-T959 using Tapatalk 2
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
janthe6th said:
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
Click to expand...
Click to collapse
You have to reinstall packages twice for it to work properly. It is normal to not work the first time, just reinstall packages again and you should be good to go. If you keep having issues you should just flash back to stock 2.1 with Odin and go from there.
Sent from my SGH-T959 using Tapatalk 2
So I have heard people talk about always putting the .zip files onto the root of our SDs. I have always followed this procedure. However, I usually tether my phone to my computer and do it all that way. When I installed NEROv2 a couple days ago, I downloaded the file straight from my phone due to no USB access on work computer. The phone initially did not know where to get a file from and told me it was aborted. But when I chose "install from SD" I was able to go into the /downloads folder and find the .zip in there. From there I chose to install .zip and it seemed to work just fine. I also DL'd JL5 and flashed that onto my phone via the same process with seemingly no issues.
What risks am I taking by not saving directly to the root of SD?
One that I can think of because it happened to me. I got locked out of my phone. My pin on the lockscreen wouldnt take. I had to reboot into recovery and reflash the ROM I was using. I would save it the SD, if for some reason you get stuck in a boot loop and can only access recovery its there if you need it.
You are right that you can install from your download folder, I do this a lot.
I think it's a combination of old practices and tied to the rooting process *MUST be on the root of your sd*
I don't think there is one good reason.... then again, how hard is it to move a file with Root explorer/astro.
I have an S-OFF HTC Incredible S 4G running 2.3.3 trying to get it rooted, I am trying to keep up but so use to stupid iPhone modding/themeing so just lost on how to send or use my SD card for ROMS? Can I just use the old word (shsh) files over to my phone while its plugged in its the Fdisk and do I put the files into 'root', I have installed Superuser app/ROM Manager app onto my phone also have Gingerbreak.v.120apk on my desktop plus Superuser.apk am I lost or what and anyone willing to help but go easy on me?
Thanks, TheCrow
Do you have ClockworkMod Recovery installed?
I have ROM Manager installed off the Market but my question is probably the one that I'm can't get the answer for which is, how do I transfer things onto my SD card cuz I have played a lot with my old iPhone 4 with mods/themes and so on but never had to write to my SD card atleast I don't think I did thats why I ask if its as easy as dragging and dropping files over to my phone while its plugged into my computer as 'use as driver'? I can't even get the CWM to work properly because it says something about 'special privillages', I have S-OFF but just want to get rooted so I can move on to the fun . Do I need something set on my phone or installed to get going, I also put Superuser & Astro on my phone from the Market so can if you have the time just give me a few dumby steps to point me in the right direction and I am over at the Android Newzealand site which is awesome but they get most files from here and only one guy is trying to help
Thanks, TheCrow
@Crow1372
I am all about trying to get things done in the easiest way possible to help the people that are new to Android.
This method has worked for me but there is no guarentee that it will work for you and I am no way responsible for anything that happens to your device.
DO THE ROOTING PROCESS AT YOUR OWN RISK
Procedure to Root HTC Incredible S
1. Install the ADB on your computer, but before that you will have to turn on the USB debugging in your incredible S which can be turned ON by pressing the “Menu” key first then “Settings” > “Applications” > “Development”. Now here you will find an option of “USB debugging”, select the option and just accept the warning which it will pop up. It’s very important to put the device in the USB debugging and also important to go through the ADB setup process without which it’s not advised to proceed.
2. Now you will have to download the Rooting package which you will have to unzip the same and need to place in the location path c:\adb after which you will have to connect the phone to the computer.
3. Now, open the command prompt and key in the “cmd” and then you will have to make use of the change directory command so that the directory in which you have placed the rooting file can be accessed.
4. Next type in the “pushroot” and enter the same, basically this will push in the pushroot.bat file.
After this type in adb shell /data/local/tmp/getroot and after that type in adb shell and press enter.
After typing in the above commands, you will now be prompted as # after which you will have to type in /data/local/tmp/pushroot.
That’s it you have now successfully rooted the HTC Incredible S
TheCrow1372 said:
I have ROM Manager installed off the Market but my question is probably the one that I'm can't get the answer for which is, how do I transfer things onto my SD card cuz I have played a lot with my old iPhone 4 with mods/themes and so on but never had to write to my SD card atleast I don't think I did thats why I ask if its as easy as dragging and dropping files over to my phone while its plugged into my computer as 'use as driver'? I can't even get the CWM to work properly because it says something about 'special privillages', I have S-OFF but just want to get rooted so I can move on to the fun . Do I need something set on my phone or installed to get going, I also put Superuser & Astro on my phone from the Market so can if you have the time just give me a few dumby steps to point me in the right direction and I am over at the Android Newzealand site which is awesome but they get most files from here and only one guy is trying to help
Thanks, TheCrow
@Crow1372
Click to expand...
Click to collapse
Try reflashing CWM Recovery. Since you have S-OFF, it should work. If you get it to work, then flash (install zip from SD in CWM) the attached file and you should be rooted.
Theonew said:
Try reflashing CWM Recovery. Since you have S-OFF, it should work. If you get it to work, then flash (install zip from SD in CWM) the attached file and you should be rooted.
Click to expand...
Click to collapse
I appreciate the one above yours and kinda understand it but waaay too indepth maybe, I also tried yours but when I go to HBoot menu and Recovery to look for the .zip file it is no where and I plugged my device into computer and 'debugging Enabled' also set my connection as 'disk drive' to load the file to my SD card but still can't find it?? I can't believe it is this hard cuz I see many others rooted and flying away on their Incredible S 4G, I was able to get the Gingerbreak.v.1.20apk on my device but it just keeps loading and saying that it will reboot once successful but after 20-30mins I figured it was not going to work also I have ROM Manager installed already but as you know no Superuser previlliages yet so can't load CWM
TheCrow1372 said:
but as you know no Superuser previlliages yet so can't load CWM
Click to expand...
Click to collapse
Have you tried searching for the zip when your device is NOT connected to your pc? And just so you know, you do NOT need superuser privileges (root) to be able to use ClockworkMod especially since you already have S-OFF. Have you tried flashing a different version of ClockworkMod? You could try using this: http://forum.xda-developers.com/showthread.php?t=794638 to flash it from your PC.
Theonew said:
Have you tried searching for the zip when your device is NOT connected to your pc? And just so you know, you do NOT need superuser privileges (root) to be able to use ClockworkMod especially since you already have S-OFF. Have you tried flashing a different version of ClockworkMod? You could try using this: http://forum.xda-developers.com/showthread.php?t=794638 to flash it from your PC.
Click to expand...
Click to collapse
I'll try finding it without being plugged in to pc, I put Gingerbreak.v.1.20apk on my SD card no issues so I shouldn't have an issue putting the CWM on but do you have a newer version (sorry) also do you think one of my issues is that I have a CWM on my 'Astro' file finder but the files say they don't exist so should I delete it and start over with a newer one that you may have and should I take of ROM Manager until I finish putting these files in cuz it should not be this hard others are rooted on their Incredible S 4G 2.3.3.
TheCrow1372 said:
so I shouldn't have an issue putting the CWM on
Click to expand...
Click to collapse
Please explain this. Here's the image: http://downloads.unrevoked.com/recoveries/cwm-4.0.1.4-vivo.img .
I can't open that image, my Winrar is acting up can you explain the image please (sorry)?
Also when I go to my 'Programs' on my computer 'Uninstall' it shows the SDK Tools with an 'X' beside it like it did not fully install, I don't know if I really need the ADB & SDK tools but I'll keep trying that later but I want to try your methods as well cuz as I mentioned it should not be this hard to root my phone right but I have to go to Doctors so I will check in later and keep trying
TheCrow1372 said:
I can't open that image, my Winrar is acting up can you explain the image please (sorry)?
Click to expand...
Click to collapse
You are not supposed to open the image. Download Android Flasher, connect your device to your pc, run Android Flasher, select recovery (at the side), find the image file you downloaded, select it, click ok (and again if necessary), and it'll do the rest.
Question, I drag and drop files over to my phone while plugged in to my SD card but everyone says to the root folder I just don't have a 'root' folder so one guy said to drop the files into the very first one and that is what I did with Gingerbreak.v1.20apk but it just says its rooting and will reboot device when done? After 3 attempts each at 15-25mins the wheel is still spinning so am I putting it in the right spot, Gingerbreak does show up in my apps drawer but the unzipped versions of CWM or Superuser never show up on my device even when I go to 'recovery' through Revolutionary to unzip it?
TheCrow1372 said:
Question, I drag and drop files over to my phone while plugged in to my SD card but everyone says to the root folder I just don't have a 'root' folder so one guy said to drop the files into the very first one and that is what I did with Gingerbreak.v1.20apk but it just says its rooting and will reboot device when done? After 3 attempts each at 15-25mins the wheel is still spinning so am I putting it in the right spot, Gingerbreak does show up in my apps drawer but the unzipped versions of CWM or Superuser never show up on my device even when I go to 'recovery' through Revolutionary to unzip it?
Click to expand...
Click to collapse
Did you read/understand my previous post?
Kinda but how does that have anything to do with rooting my Incredible S (sorry) its just that I'm new to HTC devices and I've been told that I have to be rooted to put ROM themes on my device and I have S-OFF, thats not enough is it? I tried the guy above yous method of ADB but my computer does not 'recognize that path', I did exactly what his video says but again is either of these methods going to get me 'rooted cuz all I want to do is start enjoying my phone plus your saying I don't have to have 'Superuser Permissions' to use CWM?? Sorry bro if I'm being difficult but I just want to be rooted already and have you heard of this angermod or what ever its called, like Gingerbreak or something?
HELP PLEASE lol, thanks
Forget about Gingerbreak. The tool (and instructions) is to flash the custom recovery (ClockworkMod) to your device. I said this before, and I'll say it again, using ClockworkMod recovery DOES NOT require root. You are going to root your device by using Clockwork to flash the file attached in post #5. After flashing that file, your device will be rooted.
When I go to extract it they ask for a gehroot password, I copied what looks like a password under my Incredible S/Vivo but that one did not work for the CWM download
I will try this tomorrow 4 sure and thanks for your patients, fill you in when I'm rooted (hopefully) Also is there a special password to download the CWM for my Incredible S/Vivo, sorry again?
One more question (sorry) the one I did download the other day was supposed to be CWM but it has all kinds of other files with it like 13 files including 'SuperOneClick' also suv1/v2/v3 plus 'busybox' but don't see cwm anywhere so anyway do I use the 'Android Flasher' and flash all of them like the whole folder or each one individually?
In the CWM image file, there are like 13 files that came with it like suv1/v2/v3 plus busybox and SuperOneClick so which or all of these files do I flash with Android Flasher?
Hi folks
I hope I am not breaking any rules. I tried my best to read up on the problem and see if it's already been fixed. So far I haven't encountered anything which is specific to my needs, but I learned enough to pose a well-formed question.
Phone: Samsung Galaxy SIII International (GT-I9300)
ROM: Stock Samsung, version 4.1.2, the update with Multi-window. Do not have the exact build number unfortunately.
Root status: Rooted
Recovery: Stock recovery. (I JUST rooted the phone, nothing else.)
So the problem is:
1. I used ES File Explorer in root mode, mounted /system as writable, and made an edit to build.prop (added "qemu.hw.mainkeys=0" to the end of the file to enable navbar) and saved the file. I rebooted the phone and now it is stuck with a looping Samsung logo.
2. I have made a backup of build.prop and placed it in /sdcard/ but unfortunately I haven't made a copy on my PC. Also note that I don't have an external SD card, I am using the 16GB space that came with the phone. So the build.prop backup is on the phone.
3. I do not have a USB cable (I have one that has a loose connection somewhere and my phone is not detected 99% of the times I've used that cable)
What I have found after 2 hours of searching online:
1. Factory Reset through recovery (I am able to boot into stock recovery by doing Vol Up + Home + Power) will not restore /system partition so that won't fix this.
2. ES File Explorer might have messed up the file permissions of the build.prop file.
3. I can use PC ODIN to flash the stock firmware (I might lose data but at least the phone would be back to normal).
4. I can use adb to push a good build.prop file and set the correct permissions (my most fav. set of instructions are from here: http://forum.xda-developers.com/showthread.php?t=1660596 Of course I got the idea from several other threads)
5. I can sideload a good build.prop file that someone might be generous to provide me using adb.
I don't have a data cable, so you can see how that Might be a problem. What I DO have is a USB OTG cable and a pen drive. Now, in the stock recovery, I noticed an option "apply update from external storage". Assuming I have an update.zip with the proper build.prop in it, can I load the update.zip into a usb pen drive (formatted to fat32)? Does "apply update" here work for such zip files or is it only meant to be used for full firmware images? If so, can I just download the latest stock firmware and apply it from here without wiping the /data partition?
If I can get this resolved tonight I can get my phone up and running before tomorrow's work week. I will buy an USB cable ASAP (it's 12 AM here so going out to get it is not an option now). But even if I do, I still have 5 months worth warranty left and I'd like to stick with the stock recovery and avoid incrementing the flash counter altogether, despite Triangle Away.
Thank you very much for the help in advance.
Adb pull your backup» then push it back?
slaphead20 said:
Adb pull your backup» then push it back?
Click to expand...
Click to collapse
I don't have a working data cable, so I cannot connect to the PC. That was my first idea, though, thanks! I am currently reading about making an Update.zip. It's very unfortunate that I didn't note my firmware details after the OTA...
Just set permissions - use Properties in ES FE in root mode. RW. R.. R.. should work.
LenAsh said:
Just set permissions - use Properties in ES FE in root mode. RW. R.. R.. should work. If not try 777 for giggles.
Click to expand...
Click to collapse
I am unable to boot into the phone, it is stuck in a bootloop
I don't have a USB cable to use ADB. I don't even have a custom recovery. All I have is the stock recovery and the option to "apply update from external storage". I now remembered that I also have an SD card on which I can put an update.zip or the stock firmware. Unfortunately I didn't note down the firmware details after the last OTA from 4.1.1 to 4.1.2, so I don't know which one to download.
Can I use the option "apply update from external storage" to flash an update.zip or is that only meant for full firmwares? Thanks!
Oops - silly me.
You are running stock recovery - never use it but does it have a fix permissions option?
Failing that you may have to reflash the ROM. Stock recovery is very restrictive on what you can flash.
LenAsh said:
Oops - silly me.
You are running stock recovery - never use it but does it have a fix permissions option?
Failing that you may have to reflash the ROM. Stock recovery is very restrictive on what you can flash.
Click to expand...
Click to collapse
Fix permission option on the stock recovery? I don't think so, haven't been able to find it. Here are the options I have:
reboot system now
apply update from adb
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Interestingly, when I selected the last option, it had these 3 folders:
fota/
lost+found/
recovery/
I was hoping fota/ had the files from my last OTA update but nope.
I guess you are not sure whether I can flash an update.zip through stock recovery... so I just have to wait till I get my USB cable and try out some adb magic?
EDIT: I'm retiring for the day. Thanks for the suggestions @LenAsh and @slaphead20. I'm gonna buy a cable next week and try to set the permission to 644 (RW-R-R) using this thread as my reference (http://forum.xda-developers.com/showthread.php?t=1660596). Thanks for your suggestions, I will post back when this is all resolved.
In the meanwhile, please keep the ideas coming
PS: Oh wait, I am still curious. What is the worst thing that could happen if I try to flash an update.zip through stock recovery? I am very curious to see if it will work.
You could flash a later custom recovery (this one works well http://forum.xda-developers.com/showthread.php?t=2002953) via Odin and then fix permissions that way. Even if that doesn't work, you could then flash anything you like without having issues that the stock recovery presents.
EDit: still need a cable though...
Trouble is he hasn't got a cable, I had same thinking, that he could use the aroma file manager in philz but he's stuffed without a cable!
Possible to make an update.zip with just the build.prop in it. Copy it to a memory card and use recovery to flash it?
I would try that first.
Edit: i just remembered i have done that a few times with my htc desire. Was running clockwork mod though.
Its really easy, find a small flashable mod in zip format and delete all the mod files and copy your build prop in. Edit the updater script to just write your /system/build.prop.
Copy the zip to you mem card. Use a usb adapter in a pc, stick it in your phone and use recovery to flash from external sd.
And after typing all that i reread your post and your running stock recovery and i think you would need a signature or something on the zip so it would not work. Ooops.
Sent from my GT-I9300 using xda premium
Stock recovery won't let you flash anything much... so perhaps his only option is Odin. When he has a cable.
On a side-note, how can someone not have a USB cable of any kind kicking around??
LenAsh said:
Stock recovery won't let you flash anything much... so perhaps his only option is Odin. When he has a cable.
On a side-note, how can someone not have a USB cable of any kind kicking around??
Click to expand...
Click to collapse
Just edited my post
Sent from my GT-I9300 using xda premium
@LenAsh, @slaphead20, @ficti0n851
Hehe, yeah, I'm stuffed without a cable I lost it recently and I'm the only one with a recent phone. All my family members' phones use different cables.
Anyway, I managed to borrow a friend's cable and am currently downloading drivers for the S3. Once that's done I will use ADB to set the file permission and try rebooting my phone, failing which I will restore the backup build.prop, set permissions and reboot the phone. Failing which... well, maybe I'll reflash the stock firmware (I managed to find out the exact build details btw! )
I'll keep you posted, thanks for taking the time guys
--
EDIT:
ADB was a success! I got in and changed the permission to 644 and rebooted, done! Funny thing was that /system/build.prop file was not even there, there was only /system/build.prop.bak. I was not able to find my original backup on the sd card, but I copied the .bak file (probably generated by ES FE) and set its permissions and that worked. And now I have also have the software keys!
Thanks for your comments guys. This was fun!
----
EDIT 2:
For anybody else who has the same problem, I did it using the commands in these great ADB guides:
http://forum.xda-developers.com/showthread.php?t=1660596
and
http://forum.xda-developers.com/showthread.php?t=879701
Also, how do I edit the title of the topic? Want to add a [Solved] tag.
ficti0n851 said:
Possible to make an update.zip with just the build.prop in it. Copy it to a memory card and use recovery to flash it?
I would try that first.
Edit: i just remembered i have done that a few times with my htc desire. Was running clockwork mod though.
Its really easy, find a small flashable mod in zip format and delete all the mod files and copy your build prop in. Edit the updater script to just write your /system/build.prop.
Copy the zip to you mem card. Use a usb adapter in a pc, stick it in your phone and use recovery to flash from external sd.
And after typing all that i reread your post and your running stock recovery and i think you would need a signature or something on the zip so it would not work. Ooops.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey, I know this post is from forever ago, but is there a chance you could explain this step by step for a noob?
I have got my phone stuck in a bootloop by fiddling with build.prop, and I have the original file before playing with it. I have a rooted device with custom recovery, so how I could I use minimal ADB to push the original build.prop located on my device (sdcard) to root/system??
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
gautham_y said:
@LenAsh, @slaphead20, @ficti0n851
Hehe, yeah, I'm stuffed without a cable I lost it recently and I'm the only one with a recent phone. All my family members' phones use different cables.
Anyway, I managed to borrow a friend's cable and am currently downloading drivers for the S3. Once that's done I will use ADB to set the file permission and try rebooting my phone, failing which I will restore the backup build.prop, set permissions and reboot the phone. Failing which... well, maybe I'll reflash the stock firmware (I managed to find out the exact build details btw! )
I'll keep you posted, thanks for taking the time guys
--
EDIT:
ADB was a success! I got in and changed the permission to 644 and rebooted, done! Funny thing was that /system/build.prop file was not even there, there was only /system/build.prop.bak. I was not able to find my original backup on the sd card, but I copied the .bak file (probably generated by ES FE) and set its permissions and that worked. And now I have also have the software keys!
Thanks for your comments guys. This was fun!
----
EDIT 2:
For anybody else who has the same problem, I did it using the commands in these great ADB guides:
http://forum.xda-developers.com/showthread.php?t=1660596
and
http://forum.xda-developers.com/showthread.php?t=879701
Also, how do I edit the title of the topic? Want to add a [Solved] tag.
Click to expand...
Click to collapse
Bro, I got the same problem as you had, except that I have a custom recovery, and the original build.prop file, and a USB cable, but I still haven't figured out what to do completly. Can you please take a minute to explain this for a complete noob? You have probably forgot all about this, but I am shooting for this chance. :/
black_hawk1990 said:
Hey, I know this post is from forever ago, but is there a chance you could explain this step by step for a noob?
I have got my phone stuck in a bootloop by fiddling with build.prop, and I have the original file before playing with it. I have a rooted device with custom recovery, so how I could I use minimal ADB to push the original build.prop located on my device (sdcard) to root/system??
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
Bro, I got the same problem as you had, except that I have a custom recovery, and the original build.prop file, and a USB cable, but I still haven't figured out what to do completly. Can you please take a minute to explain this for a complete noob? You have probably forgot all about this, but I am shooting for this chance. :/
Click to expand...
Click to collapse
Hey, are you still having problems or did you solve it yourself? Anyway... If you still don't know what to do, describe best what you did to end up in a bootloop. As far as I understand what your problem is, you should use your recovery to move the backup of the original build.prop file to the system folder.
I changed my phones build.prop and when rebooted it does not started and ended up in bootloop and when I searched for how to fix this problem it showed that clear all the data from the phone but nothing happened and when I tried to install custom ROM in my phone my pc is not detecteing my phone .so what should i do ?
@Rajsh90: pull out battery for some minutes, put it in, reboot into downloadmode. Connect with PC, start Odin and hope that a COM-flag colours. Flash latest firmware.
I am almost done rooting my HTC One. I am able to boot into recovery and get into TWRP but when i go to install it goes directly to SD (which I don't have). I have looked through all of the folders to find the .zip file that I need to install SU but it is not there. I have downloaded it directly to the phone as well as added it from "file transfer." File transfer that there are 3 zip files on the phones internal memory but nothing shows up in Team Win. Help?
Also when I reboot from Team Win, I get a message that tells me I am not rooted, and asks if I want to install SU.....I am afraid ill brick the phone if I swipe to install with no zip selected.
figured it out
ghost19d said:
I am almost done rooting my HTC One. I am able to boot into recovery and get into TWRP but when i go to install it goes directly to SD (which I don't have). I have looked through all of the folders to find the .zip file that I need to install SU but it is not there. I have downloaded it directly to the phone as well as added it from "file transfer." File transfer that there are 3 zip files on the phones internal memory but nothing shows up in Team Win. Help?
Also when I reboot from Team Win, I get a message that tells me I am not rooted, and asks if I want to install SU.....I am afraid ill brick the phone if I swipe to install with no zip selected.
Click to expand...
Click to collapse
I had installed the wrong package for TWRP. Got it changed over and it works fine now!