Repairing X10 via SEUS - XPERIA X10 Q&A, Help & Troubleshooting

Hi All,
I am hoping that someone could help me. I am trying to repair my X10 using SEUS but it keeps coming back with the message that there is no software for my device. I am using Z's Froyo ROM at the moment... do I need to reflash stock ROM first then retry?
Thanks in advance for your help.

Yes and this is not the right section... This should go under Q&A!
Jim

jimbo77 said:
Yes and this is not the right section... This should go under Q&A!
Jim
Click to expand...
Click to collapse
You're absolutely right...sorry about that. Posting in Q&A was my intention... just wasn't paying attention.
MOD please move/delete/burn/sacrifice or do whatever you feel necessary to this post.

Flash this ROM via Xrecovery then SEUS give u option for upgrade... an other thing is if u want to be on 2.1 this ROM is too good.
http://forum.xda-developers.com/showthread.php?t=941745

Thanks farazafs. The point of this exercise for me is to see if I can restore my battery performance. I have read on the XDA forums here that using the SEUS tool to repair the device and then load the ROM has helped some people with this issue.

farazafs said:
Flash this ROM via Xrecovery then SEUS give u option for upgrade... an other thing is if u want to be on 2.1 this ROM is too good.
http://forum.xda-developers.com/showthread.php?t=941745
Click to expand...
Click to collapse
This Dose Not Work Tryed 4x and 5x

pinginn said:
This Dose Not Work Tryed 4x and 5x
Click to expand...
Click to collapse
Downgrade to .24 then try SEUS to repair to .435
This worked for me, now I am rooting, etc.. and am going to reload a ROM

as i posted it here
AN7 OverClocker said:
If you have problem with the update via SEUS because it says that you have the latest update and wont lets you reinstall the OS, you should try the following
1. Go Here and download the .504 version and flash it via flash tool.
2. Boot your phone and finish the settings wizard.
3.Shut it down
4. Run SEUS and update to .435
I hope that helps for any upcoming problems.
Click to expand...
Click to collapse

Thread Moved. Please post in the correct sections.

Related

[Q] downgrade back to .24 please ? how? help?

so i went along with the hype and updated my baseband and firmware to .54 , .435 ....but i want to go back to previous .24 firmware so i can go back to beta3. as i am not so much happy with beta4 (my quadrant is significally lower, and not many themes are ready for the new baseband and stuff) ... is it possible ? guide please ?
downgrade ?
i would have searched but i do not have time right now. after i post this i will not be back for a few hours and wanted to come back to an answer.
much appreciated of any help.
i figured i could just flash a lower firmware....? with flashtool but want feedback before i try.
repair your phone with PC Companion, you'll get a clean FW.
And then just play around
I am on .435 I want to go back down to . 24....
Sent from my X10i using XDA App
So use flash mode to go back to .24
Tehouster said:
So use flash mode to go back to .24
Click to expand...
Click to collapse
flash mode with sues ?
or xrecovery ?
flashtool ?
sorry. i think im really overthinking this right now. lol
mrljlamon said:
flash mode with sues ?
or xrecovery ?
flashtool ?
sorry. i think im really overthinking this right now. lol
Click to expand...
Click to collapse
The best is flashtool.
Tehouster said:
The best is flashtool.
Click to expand...
Click to collapse
so i repaired with sues which installed the .435 which is what i was trying to get away from.
and i feel like if i flash .26 via flashtool im gonna mess something up.
i cant believe that downgrading would be so easy.
hmmm
mrljlamon said:
so i repaired with sues which installed the .435 which is what i was trying to get away from.
and i feel like if i flash .26 via flashtool im gonna mess something up.
i cant believe that downgrading would be so easy.
hmmm
Click to expand...
Click to collapse
Yes, is pretty easy
speaking from experience or just gut feeling ? lol
mrljlamon said:
speaking from experience or just gut feeling ? lol
Click to expand...
Click to collapse
It does all your you.
Tehouster said:
Yes, is pretty easy
Click to expand...
Click to collapse
soooooo im willing to bet its gonna mess up my baseband lol.....
but even if it doesnt work i can repair with sues so really nothing to fear i guess.
Tehouster said:
It does all your you.
Click to expand...
Click to collapse
idk what this says hah sorry
mrljlamon said:
idk what this says hah sorry
Click to expand...
Click to collapse
Grammar mistake!
Sorry
EDIT : It does all the work for you. Just connect to flash mode.
You can flash it back to an older baseband I don't see why not. Tuesday morning I was going back & forth between stock at&t 1.6, 2.0.2.A.0.24, 2.0.A.0.504 & 2.1.A.0.435 to test things out (had nothing else to do and was bored ). Then I saw beta4 so I stayed on .435 and flashed beta4. I may flash it back in a day or two if the battery condition doesn't improve. It is worse than beta3 and it gets too warm.
Edit: Almost forgot, here's the link I used. It has the older roms.
http://forum.xda-developers.com/showthread.php?p=10738467
thank you both ! i will try it.
mrljlamon said:
thank you both ! i will try it.
Click to expand...
Click to collapse
good luck!
Lockon Stratos said:
You can flash it back to an older baseband I don't see why not. Tuesday morning I was going back & forth between stock at&t 1.6, 2.0.2.A.0.24, 2.0.A.0.504 & 2.1.A.0.435 to test things out (had nothing else to do and was bored ). Then I saw beta4 so I stayed on .435 and flashed beta4. I may flash it back in a day or two if the battery condition doesn't improve. It is worse than beta3 and it gets too warm.
Edit: Almost forgot, here's the link I used. It has the older roms.
http://forum.xda-developers.com/showthread.php?p=10738467
Click to expand...
Click to collapse
so i tried flashing the .24 ftf file with flashtool. after reboot my phone was exactly the same.....so didnt work.
Tehouster said:
good luck!
Click to expand...
Click to collapse
didnt work but i tried my old method of flashing and got down to .46, .504 does beta 3 work with this ? do u know ?
mrljlamon said:
so i tried flashing the .24 ftf file with flashtool. after reboot my phone was exactly the same.....so didnt work.
Click to expand...
Click to collapse
If you grabbed any of the .24 build from the link and if you did it correctly, you should actually be in 2.1 (.49, build .24). After that, using the flash tool, root it again, install xrecovery then restore your beta 3 or do a fresh install. I just did that on my phone so not sure how you can still be in beta4 after flashing to the .24 build.
no...im saying i was still on .435 ....i did everything right. its simple to flash. it just didnt work.

[Q] my xperia 10 restarts

my xperia 10 restarts again and again during the day for no reason i have recently updated my phone to android 2.1 and since then having this problem...when i update the phone through pc compinion or pc sony ericson udpate it gives error "unable to install or start software update components" plz help me out i love this phone
Might need a warranty repair. Mine did when my phone kept restarting. Think they replaced the motherboard.
Have u tried flashtool from the x10 development section yet? And flash the latest firmware and baseband. If u havent and want to try it, post again i will try to help
Try this first before warranty repair. It will save u money if this works
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
I'm having the same problem. I believe is something with the sd card. If I use the phone to dial or surf the web there's no problem, but if I start NDrive, or any game that's installed on the sd card, then the phone reboots
can u plz copy paste the specific link of installing flashtool and firmware.
and how to install them step by step thanx alot for your suggestions plz reply
rizwanshehzad said:
can u plz copy paste the specific link of installing flashtool and firmware.
and how to install them step by step thanx alot for your suggestions plz reply
Click to expand...
Click to collapse
Here it is all install directions should be in link and all firmwares. Try on your own then I will help you if you need it with set up flashtool. Theres a howto in the link by Rendeiro2005. Look for that.
Here is link.
http://forum.xda-developers.com/showthread.php?t=920746
on thank u so much i will try ....u r awsome dude thanx so much for reply
rizwanshehzad said:
on thank u so much i will try ....u r awsome dude thanx so much for reply
Click to expand...
Click to collapse
Post back if it works
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
flashed mobile with this firmware
2.1_2.0.2.A.0.24 DualTouch
it is now not restarting that much but it is still now about 3 4 times a day on its own...anymore suggestions????
also didnt flash baseband as i was not sure of which one to do for this specific firmware please guide me on this also
I had the same issue what rom ur on? I flashed another rom and my problem got fixed you might wanna do a system repair via seus tho if you dont want an custom rom
Sent from my X10i using XDA Premium App
shaunbu said:
Might need a warranty repair. Mine did when my phone kept restarting. Think they replaced the motherboard.
Click to expand...
Click to collapse
I had the same problem. The only solution for me was a new mb. The service center comfirmed that some of their early mbs were overheating.
Sent from my X10 using XDA App

[Q] Can't Flash My Phone To Stock ROM....[SOLVED]

Guys i need your help......I got a huge problem with my phone......
I am currently using MINI CM6-1.0.2,but i want to switch to Stock SE ROM 2.1....but i can't....I have tried all stuffs....like
CWM v3.2.0.0-r3 to change ROM but it Errors (only takes Gingerbread).
Then i tried SEUS which also can't even recognize my phone(really fade up),And as per the PCC it also can't even to download update files for my phone......
After all these i tried Flash-tool which was hopeless though......
Can't able to understand what should i do to switch it from CM6 to Stock.
Please Suggest And Reply Quickly....Thanks in Advance
take another shot with MiN, via cwm:
http://forum.xda-developers.com/showthread.php?t=1218568
hope it works.
Thanks...i just downloaded it, i'll take a chance with it....
dr.norton said:
take another shot with MiN, via cwm:
http://forum.xda-developers.com/showthread.php?t=1218568
hope it works.
Click to expand...
Click to collapse
Reply if that works!
Sent from my Stunning X10mini using MiniCM7< 2.0.6 >
yeahh that worked....now i can update my phone via PCC or SEUS....
pratyush_gamer said:
yeahh that worked....now i can update my phone via PCC or SEUS....
Click to expand...
Click to collapse
nice to hear that, cheers

[Q] i'm newbie

i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread
Click to expand...
Click to collapse
You can't run a gingerbread rom with the stock kernel! Thats why you stick on the stock kernel logo (sony ericcson). Read the first post of the rom you flashed carefully. Isn't there something like you need costum kernel, unlock bootloader first...
What Rom did you Flash?
I hope you did a Backup in recovery ?
Did you follow the install instructions? Full wipe... Tell us a bit more, so we ca help you
U20i/nAaCM7+Kernel/XDAPremium
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
Click to expand...
Click to collapse
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
i understand but i got something confused what did u say
CrazyGamerGR said:
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
Click to expand...
Click to collapse
what is the seus???i just didn't understand back part did you saying something like‘at the finish take a kernel and istall it with flashtool of binary and later of this install your rom’
where did i find it the flashtool you also need me to connect my phone to sony ericsson update service(you mean sony ericsson companion)
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Sent from my U20i using XDA App
Yes
hiratafabio said:
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
yes...does mean i flash wrong???how to i do...
thanks
hiratafabio said:
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Click to expand...
Click to collapse
erm...need to download bootloader and custom kernel???you got link for the tutorials???
wong950323 said:
erm...need to download bootloader and custom kernel???you got link for the tutorials???
Click to expand...
Click to collapse
You need to unlock the Bootloader. Then you can flash a Costum Kernel. Use The flashtool, it's a Genius "one big Button Tool" from Bin4ry and Androxyde Thank and Donate to them. Read here: http://forum.xda-developers.com/showthread.php?p=10881307. Its a "How to Guide". The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
U20i/nAaCM7+Kernel/XDAPremium
Before flashing a custom kernel, be sure you meet the requirements to do so. I mean, sometimes you need a specific baseband version in order for the kernel to work properly
Sent from my U20i using XDA App
link
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
Click to expand...
Click to collapse
is the link can be use???i download and the file was have been damage...
Which rom are you trying to flash?
wong950323 said:
is the link can be use???i download and the file was have been damage...
Click to expand...
Click to collapse
So you try to download the flashtool? Try to download again, it's a Server problem. When i dowloaded the newest Version it took me 5 ! Times. The fifth Time 45 min to download it. Juste try again when the download stops
U20i/nAaCM7+Kernel/XDAPremium
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps.
Click to expand...
Click to collapse
is this link fake???i can't download it
http://forum.xda-developers.com/show...php?p=10881307 this i download it and install...it say want ftf file right???i wanna download ftf file???
i open flashtool and connect my phone it say'For 2011 devices line, be sure you are not in MTP mode
'what mean???hope you can save my phone
01007653 said:
Which rom are you trying to flash?
Click to expand...
Click to collapse
android 2.3 gingerbread
wong950323 said:
android 2.3 gingerbread
Click to expand...
Click to collapse
But are you trying to flash a custom ROM, right? What version? I mean, there is a bunch out there: MiniCM7, CM7MiniPro, GingerDX, etc.
Specifying it would be a lot helpful for us, too.
wong950323 said:
is this link fake???i can't download it
Click to expand...
Click to collapse
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
domics said:
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
ok...i just using SEUS...now done already...thanks guys
wong950323 said:
ok...i just using SEUS...now done already...thanks guys
Click to expand...
Click to collapse
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
domics said:
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
guys...can you simple to say how to flashing ROM???i install ROM manager...i want to clear old one Rom right???how can i clear it???you just give me link and list by 1,2,3...thanks

Need help with Xperia neo (MT15a) FTF

guys, this is my mobile's current specs (also, i have attached a screenshot);
Xperia neo (MT15a)
Android version 2.3.4
Firmware Version 4.0.2.A.0.62
i need to downgrade this to .42 to continue rooting. can somebody give me a link to download ftf file for MT15a??
thanks in advance, really appreciate your help guys.
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Via Tapatalk 2.0 on ICS
sdk16420 said:
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Click to expand...
Click to collapse
hm.. but update service will give him .62 not .42, right? or are you thinking on making prerooted image? hm now i got idea
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
gregbradley said:
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
Click to expand...
Click to collapse
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Madfysh said:
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Click to expand...
Click to collapse
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
gregbradley said:
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
Click to expand...
Click to collapse
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Madfysh said:
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Click to expand...
Click to collapse
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks guys.
also, what is the quick edit (in the build.prop) you told? how to do that?
Madfysh said:
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
Click to expand...
Click to collapse
I'm gonna perform this flashing with flashtool. all i need is to downgrade my current firmware to .42, so that i can root my device. also this is a sim lock free device with a locked bootloader.
is there any other way to root without downgrading??
also, thanks mate..
There are another way to root but you need to unlock your bootloader, sorry I cant put links,but if you search right here in this Forum "unlock bootloader" you would see the options to do that.
Definitly this way is the only you have without unlockink bl. Thats all the peoplo say because I cant flash .42 on mine....flashtool stop always before 100% I will format pc...i dont know what other thing can be.
Any suggestion??
Sent from my MT15i using XDA
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks mate, it worked without any mod. also, i did rooted my neo thanks to all of you.. thanks again...

Categories

Resources