Related
Hello I am a user of a LG Phoenix, I already rooted my phone via GingerBreak and installed Rom Manager and got CWM.
Well it shows all blue colors (Which I can deffinatly deal with) and says
Code:
ClockworkMod Recovery v5.0.2.0
E: Bad boot message
"recovery"
I don't mind that message either BUT it don't let me install any roms or do anything in recovery, I wanted to install 2.3 and can't with this happening.
Sorry if there's another thread I am a little lazy looking for them, but I searched for about 20 minutes to find a fix but there's none.
Thanks,
Mike
emm..if u want to update to 2.3 original firmware than u can get the KDZ Flasher (which will save your phone from a full brick) .....u can get it frm
http://forum.xda-developers.com/showthread.php?t=901247
Are you saying my phone is bricked and this will save it from being fully bricked and I don't need 2.3 I just want to overclock past 600mhz and get rid of AT&T bloatware.
Mike
Sent from my LG-P505 using XDA App
kssood said:
emm..if u want to update to 2.3 original firmware than u can get the KDZ Flasher (which will save your phone from a full brick) .....u can get it frm
http://forum.xda-developers.com/showthread.php?t=901247
Click to expand...
Click to collapse
He's using a LG Phoenix bro.
Sent from my LG-P500 using xda premium
teddybig said:
He's using a LG Phoenix bro.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yes, do you have any solution teddybig?
I tried redoing GingerBreak root and it didn't change anything still tells me that message should I unroot and try another method?
Sent from my LG-P505 using XDA App
Hello,
I have p500(indian) on old baseband and want to upgrade to new bb using lgmdp.. following are a few questions that i dint find an answer to.
1.what is the risk of having a bricked device if i turn off lg virtual modem..?
2. th lg virtual modem is shown as lge android platform usb modem.. is it the same..?
3. What rom and recovery should i be on to flash new baseband?
4. can i flash cm9 first and then new baseband?
5.my recovery takes around 5 seconds to show the options... it wasnt like this before.. is this normal? im on the recovery i firrst installed(amonra 1.2 the one with bad boot message)
6.before flashing a recovery zip or cwm from rom manger what precautions should i take?
7.In rom manager if i say install recovery.. it shows p500 and p500(oldbb) so if i flash old bb now and then upgrade.. will it work?
8. if flash the one without (oldbb) will my phone get bricked..?
Thanks for your answers in advance.. p500 was the best phone i got in my life.. and its not because of lg.. its because of its awesome community.!
> when i was on stock as you
> 1st I rooted ,this is A MUST 1st to do
> 2nd flash clockworkmod or amonra.. but cwm would be good for starters, just download rom manager at play store.. and u'll get it
> 3rd since ur on old baseband.. i suggest you flash cm7 rom or the on i modded then flash the old baseband fix so you dont need to upgrade
> incase you want to upgrade so u can also use cm9
> now is the time to use lgmdp .. Em not sure.. but i think its different ..virtual modem wasnt there when i switched baseband so i did not disabled any..
i think it good
Can anyone answer please..? cant find answers to these questions.. and neko man i think you misunderstood my question.. it partly answered one that is lg virtula modem maybe does not play an important part.. ppl please answer..
!
Well there are many tutorials out there on how to get new bb. Just follow them step by step. You have to flash it first then you can get CM9. Forgive me but some of your question sound like this "Will my phone work if I submerge half of it in water?". Don't worry just do as you're told on the tutorials All the best!
Sent from my LG-P500 using xda premium
Joel Chan said:
Well there are many tutorials out there on how to get new bb. Just follow them step by step. You have to flash it first then you can get CM9. Forgive me but some of your question sound like this "Will my phone work if I submerge half of it in water?". Don't worry just do as you'reJoel chan.. thanks for telli told on the tutorials All the best!
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
joel chan thanks for telling me.. but actually my whole family has gone out.. and this is the only phone i have.. so i have to be extra careful... being an engineer.. had to evaluate each and every risk factor that could be involved.. i know i might so III md screwed up.. but thanks for anwering atleat two of my wuestions.
akonsand said:
joel chan thanks for telling me.. but actually my whole family has gone out.. and this is the only phone i have.. so i have to be extra careful... being an engineer.. had to evaluate each and every risk factor that could be involved.. i know i might so III md screwed up.. but thanks for anwering atleat two of my wuestions.
Click to expand...
Click to collapse
Glad I could help So have you got your CM9?
Sent from my LG-P500 using xda premium
I still am not sure if i can go aHead and flash it.. i flashed it without baseband.. and it was awesome except network..will flash soon though..
Sent from my LG-P500 using XDA
akonsand said:
I still am not sure if i can go aHead and flash it.. i flashed it without baseband.. and it was awesome except network..will flash soon though..
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Yes, you'll only get the network if you have new baseband.
Sent from my LG-P500 using xda premium
like neko said, you don't have to upgrade, you can just flash the oldbb fix. i have old bb too. I have ics with service.
iliketrainsalot said:
like neko said, you don't have to upgrade, you can just flash the oldbb fix. i have old bb too. I have ics with service.
Click to expand...
Click to collapse
True!
Sent from my LG-P500 using xda premium
?
Ok.. but what baseband fix..? i tried adfads.. but didnt work.. i installed hephappys youlookbeautiful..
akonsand said:
Ok.. but what baseband fix..? i tried adfads.. but didnt work.. i installed hephappys youlookbeautiful..
Click to expand...
Click to collapse
Do you need data? If not you could use mik's patch
Sent from my LG-P500 using xda premium
Joel Chan said:
Do you need data? If not you could use mik's patch
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i dont really need it.. but it would be good if i had it.. and i thought miks patc was for running cm7 on new bb..?
akonsand said:
i dont really need it.. but it would be good if i had it.. and i thought miks patc was for running cm7 on new bb..?
Click to expand...
Click to collapse
But you could try! There's no harm
Sent from my LG-P500 using xda premium
Ok.. will try..
Sent from my LG-P500 using XDA
Aspee has an old baseband fix that might work.. there is also a funny sim fix that might work...flashing baseband is easy and simple
Sent from my LG-P500 using xda premium
I know how to flash bb.. but since this is the only phone ive got.. what are the risks of bricking it..?
Sent from my LG-P500 using XDA
akonsand said:
I know how to flash bb.. but since this is the only phone ive got.. what are the risks of bricking it..?
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
There is definitely a risk, and you have to follow the instructions clearly to avoid any risks. To be honest here, I bricked my phone thrice (yes! 3 times) using kdz updater. That's why I'd suggest that you don't upgrade to new bb using kdz updater
Sent from my LG-P500 using xda premium
akonsand said:
Hello,
I have p500(indian) on old baseband and want to upgrade to new bb using lgmdp.. following are a few questions that i dint find an answer to.
1.what is the risk of having a bricked device if i turn off lg virtual modem..?
2. th lg virtual modem is shown as lge android platform usb modem.. is it the same..?
3. What rom and recovery should i be on to flash new baseband?
4. can i flash cm9 first and then new baseband?
5.my recovery takes around 5 seconds to show the options... it wasnt like this before.. is this normal? im on the recovery i firrst installed(amonra 1.2 the one with bad boot message)
6.before flashing a recovery zip or cwm from rom manger what precautions should i take?
7.In rom manager if i say install recovery.. it shows p500 and p500(oldbb) so if i flash old bb now and then upgrade.. will it work?
8. if flash the one without (oldbb) will my phone get bricked..?
Thanks for your answers in advance.. p500 was the best phone i got in my life.. and its not because of lg.. its because of its awesome community.!
Click to expand...
Click to collapse
The only and most secure thing i have to prefer u to flash official froyo 2.2.2 on ur phone first... if u already using it then its ok... n if not then search a official froyo rom in zip format for flashing it via cwm recovery... after then... use lg pc suite for upgrading it to official 2.3.3 n ur phone will automatically updated to new bb too.
EDIT: Just clarify me what rom n recovery are u using...!?? What android version and baseband shows on ur phone....
Type in phone dialer to get BB details
3845#*500#
Press THANKS if I help you..!!
Sent from my [email protected] OpTiMu$ On€ [email protected]
Hello,
I would like to know if its possible to flash a kernel from within xrecovery? Did some one already tryed that, or will this screw up my device for sure? Or if theres another way to flash kernel and rom without the use of a pc.
Greetings. Mellowbug
Sent from my X10i using xda premium
Yes, u can flash kernel with xrec, just install it like a custom zip.
Sent from my xperia "z10i"
Oke, great. Gonna try it .. But keeping fingers crossed. First time im flashing..:|
Greetings. Mellowbug
Sent from another dimension with my X10i using xda premium
mellowbug said:
Oke, great. Gonna try it .. But keeping fingers crossed. First time im flashing..:|
Greetings. Mellowbug
Sent from another dimension with my X10i using xda premium
Click to expand...
Click to collapse
you can only flash kernel from recovery if you are on locked bootloader
mellowbug said:
Hello,
I would like to know if its possible to flash a kernel from within xrecovery? Did some one already tryed that, or will this screw up my device for sure? Or if theres another way to flash kernel and rom without the use of a pc.
Greetings. Mellowbug
Sent from my X10i using xda premium
Click to expand...
Click to collapse
YOu can simply replace kernel if you are using any custom ROM on locked kernel.
Then you can simply copy and paste it (overwrite)
EDIT: As I know, this cant be applied when on unlocked bootloader (you havent noticed it before).
Yeah, well apperntly im outta luck i geus. My x10i is rooted + unlocked bootloader, but im running 2.3.3 gb.... No custom rom, about the kernel i dont know if its stock or custom, i would have to take i look at google to find it out.
Edited: And yeah, looking back it would indeed bin better if i posted this info in first post.
After all it looks that im gonna have to borrow a pc by a friend.
Greetings. Mellowbug.
sent from another dimension using my x10i... made possible by xda premium app.
Yes, info is correct. Locked uses xrecovery, but unlocked needs flashtool & pc.
From my XPERIA X10S v8.2 on JaBKerneL @ 1.15ghz
Hello. This is my first post here so forgive me if i done or post it wrong.
In short i have updated phone from gb 6.0.B.1.564 to Ics 6.1.1.C.1.0 via pcc and it is from then acting very poorly in comparison to before, very laggy and slow in general. What id like to know now is what is best to do? I have heard there is some new latest firmware released for xu ics, is it possible for me to get that, and is it improved a bit performance? If nothing, can someone pls point me how to downgrade back to gb, or maybe suggest something else? Just so you know, my phone is not rooted and it has locked bootloader.
Thank you all in advance
Sent from my ST25i using xda app-developers app
zigeddy said:
Hello. This is my first post here so forgive me if i done or post it wrong.
In short i have updated phone from gb 6.0.B.1.564 to Ics 6.1.1.C.1.0 via pcc and it is from then acting very poorly in comparison to before, very laggy and slow in general. What id like to know now is what is best to do? I have heard there is some new latest firmware released for xu ics, is it possible for me to get that, and is it improved a bit performance? If nothing, can someone pls point me how to downgrade back to gb, or maybe suggest something else? Just so you know, my phone is not rooted and it has locked bootloader.
Thank you all in advance
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Hi zig , firstly I will not suggest u to downgrade ur phone secondly do one thing to make ur phone processing faster.... Go to settings>apps>all> click the app and on the top right u will see an option ''disable'' , disable the preinstalled apps which u don't use like ''Google +,email,gmail,talk,fb,office suite,top contacts,retail demo, recommender,maps ,Google chrome,exchange services'' restart ur phone and then use..... Let me know how is it working.
Yea there is one more new update of Xperia u and that new ICS 6.1.1.B.1.54 version is good....it's bug free ,I would like u to upgrade it.
Sent from my ''Xperia Sola'' using xda premium
Hey tyvm for a quick answer. I have done what you told me, except ofc the ones i use and exchange services, cos i dont know what it is, but im guessing its for incoming mails or messages maybe. It improved a bit, but it is still kinda laggy. The thing that is worrying me is a battery draining, it goes down rly fast. I know about the update you mentioned, but there seems to be even more new then that 6.1.1.b1.100. In any case how can i upgrade to those, be it new or older firmware? They are not listed in pcc, it sais its up to date with this last one i did. Thank you again for help.
Sent from my ST25i using xda app-developers app
zigeddy said:
Hey tyvm for a quick answer. I have done what you told me, except ofc the ones i use and exchange services, cos i dont know what it is, but im guessing its for incoming mails or messages maybe. It improved a bit, but it is still kinda laggy. The thing that is worrying me is a battery draining, it goes down rly fast. I know about the update you mentioned, but there seems to be even more new then that 6.1.1.b1.100. In any case how can i upgrade to those, be it new or older firmware? They are not listed in pcc, it sais its up to date with this last one i did. Thank you again for help.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
To get a real lag reduction and battery drain issue, I suggest you to root atleast (without unlocking your boot loader which does not void your warranty).
For that you need flashtools from there
http://forum.xda-developers.com/showthread.php?t=1933985
However, B.1.100 is slightly better than the previous version
So to try that, flash it with flashtools, you can find the download link here
http://forum.xda-developers.com/showthread.php?t=1974430
You do not require root to flash Sony stock ROMs.
Another better alternative is to flash custom ROMs for locked bootloader,
My personal suggest, go for SlimCM ROM, pretty stable and snappier.
Sent from my Xperia U using xda app-developers app
miaad said:
To get a real lag reduction and battery drain issue, I suggest you to root atleast (without unlocking your boot loader which does not void your warranty).
For that you need flashtools from there
http://forum.xda-developers.com/showthread.php?t=1933985
However, B.1.100 is slightly better than the previous version
So to try that, flash it with flashtools, you can find the download link here
http://forum.xda-developers.com/showthread.php?t=1974430
You do not require root to flash Sony stock ROMs.
Another better alternative is to flash custom ROMs for locked bootloader,
My personal suggest, go for SlimCM ROM, pretty stable and snappier.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
So in essence i can flash newest stock B.1.100 without root, and not losing the waranty (subquestion only unlocking the bootloader voids waranty, but root no? I am asking this cos i do seem to remember but i might be wrong that root can also void it, and i wanna be sure . But if i decide to go for custom ROM which you suggested do i need root for that? With root i can remove loads of stuff which i cannot do now, so thats why the lag is much lesser?
Sent from my ST25i using xda app-developers app
zigeddy said:
So in essence i can flash newest stock B.1.100 without root, and not losing the waranty (subquestion only unlocking the bootloader voids waranty, but root no? I am asking this cos i do seem to remember but i might be wrong that root can also void it, and i wanna be sure . But if i decide to go for custom ROM which you suggested do i need root for that? With root i can remove loads of stuff which i cannot do now, so thats why the lag is much lesser?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Yes you can attain root access without unlocking your boot loader.
Use flashtool method or Bin4ry's method.
Again yes, you can flash SONY STOCK fw using flashtools (without root or unlocking) in flashmode (just keep in mind to "exclude TA")
Once you are rooted you can install apps such as greenify that really helps to last the battery longer.
Also you could remove the bloatware and other useless apps.
Or you even you can make choices to install Custom ROMs for locked bootloaders. Just check the development section.
This is my personal suggest: SlimCM ROM.
Though its CM9
http://forum.xda-developers.com/showthread.php?t=2143750
See the instructions for locked boot loaders.
Sent from my Xperia U using xda app-developers app
To root fw C.1.0 or any later versions, you need to
-flash the kernel alone of B.1.0.
-follow root procedure by flashtool or Bin4ry method.
-Then flash back the corresponding kernel of the ROM.
Done
Sent from my Xperia U using xda app-developers app
Ty for all the suggestions. I rly appreciate it. Think i will go for what u suggested first, slimCM. I checked it and it looks nice.. Althou some things are not so clear to me. In both instructions, for slimCM and in patch for locked bootloader it says wipe data or factory reset in recovery. What is recovery? And it also mentions to do the backup of my current ROM. How shall i do that. Wipe data and factory reset means all data gone from phone so i should backup at least photos, music and sms-es to my pc or some app.
Sent from my ST25i using xda app-developers app
zigeddy said:
Ty for all the suggestions. I rly appreciate it. Think i will go for what u suggested first, slimCM. I checked it and it looks nice.. Althou some things are not so clear to me. In both instructions, for slimCM and in patch for locked bootloader it says wipe data or factory reset in recovery. What is recovery? And it also mentions to do the backup of my current ROM. How shall i do that. Wipe data and factory reset means all data gone from phone so i should backup at least photos, music and sms-es to my pc or some app.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
That's where you can find recovery:
http://forum.xda-developers.com/showthread.php?t=2020897
CWM recovery is required to flash custom ROMs or MODs etc.
You can find the wipe data, cache options in the recovery menu. Just back up your contacts, messages and things.
Nothing from SD card will be lost.
Do carefully patch the ROM as per the instructions to make it into locked bootloader.
Copy that zip file in SD card and enter CWM recovery
-flash ROM
Done !
Sent from my Xperia U using xda app-developers app
heyyy
U can root ur device with out touching bootloader dats pretty easier....
but remember after rooting u need to install cwm recovery bcz its used to flash custom roms and rem u can also take take backup of ur entire rom
if anything goes wrong during flashing custom u can easily restore ur device to normal..... by using back up....
flash b.1.10 rom bcz it can be easily rooted by using flashtool......
So finally the process is root first, second recovery and finally flashing rom of ur choice.....
There are so many ROMS in dev section for locked bootloader......
njoyyyyyyyyy............
I ll attach CWM recovery files download and extract.... In the extract folder double click install(.bat file) make sure device connected with debugging mode on..... accept all superuser request on device........aft rooting u ll get super user app in apptry
PM if any difficulty
zigeddy said:
Hello. This is my first post here so forgive me if i done or post it wrong.
In short i have updated phone from gb 6.0.B.1.564 to Ics 6.1.1.C.1.0 via pcc and it is from then acting very poorly in comparison to before, very laggy and slow in general. What id like to know now is what is best to do? I have heard there is some new latest firmware released for xu ics, is it possible for me to get that, and is it improved a bit performance? If nothing, can someone pls point me how to downgrade back to gb, or maybe suggest something else? Just so you know, my phone is not rooted and it has locked bootloader.
Thank you all in advance
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Flash .100 rom..... It is a lot better than previous ones
Sent from my ST25i using xda app-developers app
Thank you all from the first to the last for all the suggestions and help. The XDA is awesome, and full of helpfull people. I will post how did it go with all the rooting and recovery and ROM Cheers again
Sent from my ST25i using xda app-developers app
So i have backed up all the data (music, photos etc) on the pc. Tomorrow i will get on doing what you guys suggested. So to get it all confirmed, first do the root with flashtool, checkin superuser and rootme, and then i will be rooted. Then cwm recovery install, then applying the patch for locked bootloader for slimCM ROM, then i go back in cwm, make backup of current ROM and then wipe data, and then flash the rom.. That be the order? Is there any thing i should take special care of?
Sent from my ST25i using xda app-developers app
I had a little problems. It wouldnt let me install the flashtool drivers. Probably cos i was doing it on laptop on win8. Will try it at home on win7.
Sent from my ST25i using xda app-developers app
zigeddy said:
I had a little problems. It wouldnt let me install the flashtool drivers. Probably cos i was doing it on laptop on win8. Will try it at home on win7.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Remember install flashtool while your anti-virus is disable...!
Sent from my ST25i using xda app-developers app
I did that. But what i wanted to say i get error during the instalation of drivers. Flashtool alone was installed corectly.
Sent from my ST25i using xda app-developers app
It will be lot better if you try it with Win 7 as Win 8 + Flashtool drivers don't go well together as 8 allows only signed drivers to get installed.
Though there's a thread on how to install Flashtool drivers on win 8.
Sent from my Xperia U using xda app-developers app
Hello all. I managed to install drivers. The fix for win8 worked. I started root in flashtool, done all that i was told to but it isnt rooted. Log says Root hack did not work. Any ideas? Cheers again for all the help
Sent from my ST25i using xda app-developers app
Here's the Rooting Process for you.
This Rooting guide applies to all FW versions above B.1.10. (i.e. B.1.54/C.1.0/B.1.75/B.1.189/B.1.100)
1) Open Flashtool.
2) Click the Flash icon.
3) Select Flash Mode. (Make sure USB Debugging is ON in your Mobile Settings before connecting to PC)
4) Select & Flash the B.1.10 kernel. Then Reboot.
5) Select the Un-Lock icon and choose your preferred SU app & proceed.
6) Follow the on-screen instructions.
7) Now you have rooted your device.
8) Flash the kernel of your respective FW from the FTF file through Flash Mode and let the device reboot.
Downloads
B.1.10 Kernel - Download Here
Click to expand...
Click to collapse
Hey thank you. I have done it already, even before i read. found some guides on xda. Now onwards to cwm and flashing another ROM. Hope it will be all ok. If i have some problems i'll post again here. Cheers all
Sent from my ST25i using xda app-developers app
I'm sick of this junk phone!!!
It's locked and I have no idea who told those guys from the development section that it can be rooted even if bootloader is locked, couse i'll be damn if it worked for me.
I tryed every option shown and none worked.
Hell it dosen't even show me the restore option, every time I have to manualy go to settings and hit restore.
And in <<only one>> option I get the RootMe restore option, the one for those with open bootloader...
And I also get a lot of error in the command promt, and that shouldn't happen.
Dose anyone have any suggestions or anything? Couse I can't talk with those guys due to this new user thing... X(
I can't use it, can't sell it, I swear that for 200E that it cost me, i'll throw it away
UnixAxwell said:
I'm sick of this junk phone!!!
It's locked and I have no idea who told those guys from the development section that it can be rooted even if bootloader is locked, couse i'll be damn if it worked for me.
I tryed every option shown and none worked.
Hell it dosen't even show me the restore option, every time I have to manualy go to settings and hit restore.
And in option I get the RootMe restore option, the one for those with open bootloader...
And I also get a lot of error in the command promt, and that shouldn't happen.
Dose anyone have any suggestions or anything? Couse I can't talk with those guys due to this new user thing... X(
I can't use it, can't sell it, I swear that for 200E that it cost me, i'll throw it away
Click to expand...
Click to collapse
junk u said junk....even if u don't like this phone everyone else still using it...do whatever u want . ...u can't root its cus u a noob . the dev is trying very hard to make this device better than before if u dont like it go buy the another phone
Sent from my Xperia U using xda app-developers app
+1
Sent from my ST25i using xda app-developers app
---------- Post added at 03:40 AM ---------- Previous post was at 03:39 AM ----------
Sent from my ST25i using xda app-developers app
The "soft" mod is no longer an option for many other devices not only smartphones. The method you guys have here is usless for phones that have the bootloader phisicaly locked by sony!!!
I'm looking for a way to bypass the sony lock, the hard way...
Where are those old fonefreekz when you need them...
And is very unpolite to call someone a noob only "cus u" think he knows no s***. I was cracking phones long before Android was publicaly released...
Sent from my ST25i using xda app-developers app
UnixAxwell said:
The "soft" mod is no longer an option for many other devices not only smartphones. The method you guys have here is usless for phones that have the bootloader phisicaly locked by sony!!!
I'm looking for a way to bypass the sony lock, the hard way...
Where are those old fonefreekz when you need them...
And is very unpolite to call someone a noob only "cus u" think he knows no s***. I was cracking phones long before Android was publicaly released...
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
dafaq even if ur boot loader is locked in jail u can still root it jeez are u a noob?
Sent from my Xperia U using xda app-developers app
IT'S NOT WORKING!!!
And what makes me decide even harder to change to other company, is that I was sent here from the Sony forum...
Sent from my ST25i using xda app-developers app
UnixAxwell said:
IT'S NOT WORKING!!!
And what makes me decide even harder to change to other company, is that I was sent here from the Sony forum...
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I have an Xperia U, LOCKED BOOTLOADER, rooted and working fine. Not sure what you are doing but you are doing it wrong.
UnixAxwell said:
IT'S NOT WORKING!!!
And what makes me decide even harder to change to other company, is that I was sent here from the Sony forum...
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ITS WORKING just fine, its up to you.
Well if you know any other post in the forum for doing that i'll apreciate the link to it, couse with what i found from Bynary dosen't work
Sent from my ST25i using xda app-developers app
UnixAxwell said:
Well if you know any other post in the forum for doing that i'll apreciate the link to it, couse with what i found from Bynary dosen't work
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I found this after 2 minutes searching xda...
The guide is for Xperia U 6.1.1.B.1.10 , i don't know what firmware do you have.. so if its any newer than 6.1.1.B.1.10 than you should just flash ONLY the kernel for 6.1.1.B.1.10 , then follow this guide till the end, then after root is achieved.. flash back the original kernel for your version of firmware.
I always root this way, and i never had any problems , just before rooting set the display of your phone to NOT turn off for at least 5 minutes, not 30 seconds as it is at default.
I have some kernels if you need them
Xperia U 6.1.1.B.1.10
Xperia U 6.1.1.B.1.54
Xperia U 6.1.1.B.1.100
I have the 6.1.1.B.1.54 and my god haven't I tryed this option too. It was the very first method I found on xda back in 2012 and it failed. I will try it again however but I expect the same result as the first time...
Sent from my ST25i using xda app-developers app
Nice... The flashtool link gave me 404 and the flashtool from the other method jas no. exe in it... X(
Sent from my ST25i using xda app-developers app
flashtool-0.9.11.0-windows
flashtool-0.9.13.0-windows
UnixAxwell said:
Nice... The flashtool link gave me 404 and the flashtool from the other method jas no. exe in it... X(
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
u use window 7?
Sent from my Xperia U using xda app-developers app
No. I'm useing Vista and 8, and they both should be working... I'm not getting any errors due to driver conflicts or anything so it's not an OS problem...
And no, my AV dose not see flashtool as a worm...
Sent from my ST25i using xda app-developers app
Your phone isn't different from everybody else, but obviously you are.
Be humble and review all the steps, options and possibilities.
Sent from Hacker's U via XDA app
Patience
UnixAxwell said:
No. I'm useing Vista and 8, and they both should be working... I'm not getting any errors due to driver conflicts or anything so it's not an OS problem...
And no, my AV dose not see flashtool as a worm...
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
all u need is a little patience. first flash stock 6.1.1.b.1.10.ftf that u can download from
http://forum.xda-developers.com/showthread.php?t=2391151
in the android 4.0 section flash it using flashtool and repeat the same methods u tried earlier and report it.
It doesn't matter dump ur phone but being this way u'll never get to learn stuff............
Remember to calm down first, so your head will be clear. I was also exasperated when I was unable to root my phone with .54 kernel. I had a lot of difficulties because I am on ubuntu 13.10 and I had to first properly install the packages required by flashtool. After a gruelling 3 days of failures I decided to step back a while so I could calm down and relax. Finally I got my phone rooted after I redownloaded a .10 kernel.
Sent from my ST25i using Tapatalk
When u hurry hurry hurry u will overlook a ton of things and miss a lot of essential steps even though you say "i have tried all methods and did them correct" a human is a human and obviously can make mistakes without even knowing them. and then u fail and get hatred but thats the part where u need to cool down. In this thread i have seen a lot of Correct answers for you i even used them and managed to root my Xperia U st25i with 1.54 firmware aswell the kernel is essential in it to so take some time and relax read the threads properly and even if something fails to download Search on XDA or google and u will have so much correct answers that u will be amazed of
if u are on .54 fw then u need to download .10 kernel and flash it via flashtool and then use bin4ry's method (restoring the RootMe file) and then reflash the .54 kernel
u will get the kernel in the op of the thread linked below
http://forum.xda-developers.com/showthread.php?t=2028139
and if u seriously want to get into rooting and tweaking your phone's system then the first thing you need is a calm mind or else you will end up bricking your device