Related
I have Verizon Wireless service. I want to upgrade my phone for the first time. I've been reading alot and the Wiki but it doesn't go into great detal about how to do it. I want to make sure I have got everything down correctly first.
- First, get my phones ESN, MSID, Security, EPST, and M. IP settings by using ##778, etc.
- Second, I unlock the phone and install BootLoader 2.40 per Wiki instructions.
- Third, I install Titan_Radio_ROM_3.42.30 by coping TITAIMG.nbh to my SD mini card and running bootloader by pressing the 3 keys.
- Fourth, I install dcd_titan_kitchen_3.2.2 by running it and compiling it and coping the created RUU_signed.nbh after renaming it to TITAIMG.nbh and copying it to the SD card and running bootloader by using the 3 keys.
I pretty much checked everything before I compiled it, except items that did the same thing or that was double like the different versions of the camera. Is that OK, or will it eat up all my memory, or will I have other problems? I didn't know what alot of the stuff was, so I thought it would just be best to install everything. Also, the wiki talks about choosing the right carrier and not more then one carrier, but that option wasn't there. I assume that's what the VZ cab is now here for?
- Fifth, copy dcd Verizon Carrier 20080706.cab to the SD card and run that.
Then I do a soft reset and everything should be working? Is that right? Did I miss anything?
I also don't understand the A-key problem and how to avoid it.
I'm also confused about not booting after you upgrade the ROM and after the screen calibration the carrier customisations will run and alter my EPST settings to the operators settings and my phone will be configured to the wrong service. What's that about?
Will it allow me to run the verizon cab file from the SD card after I install the ROM without having to soft boot the phone?
Also, can I use PIM backup and restore to backup to my SD card and then restore after the ROM upgrade? Will that be a problem?
Thanks for your help and time.
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Yes, the simple stuff I left out like formatting the card, etc. I understand that.
I guess I need to use the Kitchen because their are some items in there that I want, and some items that I don't know what they are, and I'll look into it like you said instead of just checking everything just incase it's something I might want or need in the future. Like I said I didn't click on everything, stuff that do the same thing, or different versions of the same thing I didn't click on. So, I think I just clicked on everything but Enterprise + IPSECVPN, Camera 4.05.30525.00, HTC CommManager - Titan 8 Button, and HTC Titan PhoneCanvas (Dailer).
It sounds like I won't need Enterprise + IPSECVPN, because it sounds like it's for some kind of Enterprise network with VPN, and I don't have something like that. I would like to know the difference between the version 4 & 5 of the Camera. I assume version 5 is better. I assume that the Touch 10 is better then the Titan 8 button, but would like to know the differences, also the differences in the Dialers. I assumed the Vogue was preffered since it was the default one that was checked. I haven't checked out the link you left for me yet, so I'll do that to see if I can see the differences.
Do I do a soft reset after I install the Radio and before I install the ROM and after I install the ROM and before I install the Carrier Cab file?
I'm having problems doing backups now. I don't have activesync because I have Vista and it doesn't use activesync. I was able to do backups with Outook and Windows, but they won't work anymore. I was using the USB data cable and they were working fine, but then I got a Bluetooth Dongle and installed that and it messed everything up. I tried one that was compatible with XP and downloaded different drivers and I couldn't get it to work. So, I purchased one that was compatible with Vista and it would sync but not backup my contacts and appointments with Outlook like it would with the data cable. I tried using the USB cable and it won't work anymore either. I can't even get it to make a connection anymore, and it will show an error on the phone. That's why I got the PIM backup and restore software to backup to and from the SD card. I haven't used it yet. I was going to try and use it, and then do a Hard Reset and then restore my data to my phone and try to get it to backup to my Outlook like it used to with the USB Cable. If I can get that to work I was going to try and do the Titan ROM update. Any feedback would be greatly appreciated!! Thanks for all the help!! Take care!
serfboreds said:
Long post, so here is mine:
Your four steps are pretty close, other than mentioning the formatting of the sd card which you probably already know how to do via cmd, you have it right.
If you are not checking extra boxes in the kitchen, you can just use the ROM he posts underneath. If you want standard games, x-button, different versions of the phone or camera, etc or if you want to install your own OEMs then the kitchen is for you. Sounds like you are just planning on hitting everything, which I would suggest against (you don't want or need two phone versions, two cameras, etc). Leave the items where they are unless you know why you are changing them, dont click everything. Do some research on each item by googling xda here.
With regard to carrier cabs, run your carrier cab afterward to get functionality. Yes you can run from SD. I have never needed to do an A-Key reset, but others had to after upgrading radio. Just call verizon and tell them you are not able to authenticate your phone and they will reset your phone for you. Don't worry about what it is or why it happens.
Letting customizations run is for when you run the sprint update, which it doesn't sound like you are doing. If you are running the updates over sd card, you can let the customizations run, but since you dont have UC (research here) there is nothing to run so no worries; it will try to run your UC and see there is nothing there and just reboot, kewl. Don't use backups (Sprite or SPB or otherwise, best to use activesync and UC (see above).
Click to expand...
Click to collapse
Is there a size limit to the ROM file RUU_signed.nbh? There should be. Let me know. Thanks.. Steve
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
cleanser said:
Since this is your first ROM upgrade I think you should avoid the kitchen for now and just use DCD's compiled rom. (this is just my opinion) It will really simplify things for you.
As for PIM backup I would think it would work fine for contacts, but I think you will run into issues if you wan to restore SMS backups because of going from WM6 to 6.1 and the threading SMS that is used for 6.1.
I also saw this http://www.dashwire.com/ I haven't used it yet, but its free online solution for backing up your PPC.
As far as your question for soft-resets go, When you run the update the phone should reset on its own. I don't know why your active sync isn't working, but I would try and get it to work before running these updates to ensure proper connectivity of your device before running these updates.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Thats what you would need to get it to connect.
Gluck!
Click to expand...
Click to collapse
I've used PIM Backup since Jan of this year, and have had no issues restoring any SMS from a WM6 to WM6.1. It goes through and threads it all the 1st time you open up messaging, so if you have a large amount of messages, it will take a while to thread it all the 1st time you open it up....
For my first time I did not use the kitchen. I found it pretty easy to do. Just make sure you load the radio b4 the rom.
I just wanted to thank everybody for all there feedback and help, it was very helpful. The 3 main reasons I need to do the ROM update is to take advantage of the new features of WM6.1 and I need to be able to install Java and get my TomTom GPS software working. That's the 3 main reasons right now.
My phone is so messed up right now it's always locking up and having alot of problems from maybe all the apps I installed and tested and stuff. I need to reset it like 3 or 4 times a day. I think that's why I can't sync it with my computer anymore. I'm going to just back it up to the SD card and do a hard reset and get it working again and syncing with my computer and then do the ROM upgrade, etc. I will take your advice and do the stock ROM at first to figure out how to do the upgrade. I will then have to use the Kitchen to enable the GPS and the Java, right? When I do the Kitchen ROM later will I just need to upgrade the ROM, and not worry about any of the other procedures?
Also, when I do use the kitchen to create the ROM what is the size limitation on the ROM file?
Do you also have an option on which Dailer and Camera software?
Thanks again and wish me luck! LOL
Well, I downloaded the DCD compiled rom and it's filename is dcd_titan_3.2.2.exe and I ran it and it doesn't look like you can install it via the SD card. It looks like you have to do it via a PC Sync. Can you do a PC Sync after installing the Radio? Well, let me know. I think I'm ready to get started now. Thanks..
OK, well I got my phone to sync with my PC, but it sometimes has connection and disconnection problems, but I was able to get it to sync everything with my PC once.
I ran EPST and got my ESN and MSID, but I'm not sure what security information I should copy and I can't find the MSN number. There is alot of M.IP information. Do I copy everything in the M.IP Settings and M.IP Default Profile? Is there anything else I'm missing? Thanks.
May I suggest you take a digital Picture and scroll down and take a second one. This eliminates any questions on Handwriting and then blow them up on your PC if you have bad vision.
I found this software and it's even better, it not only allows you to do screenshots, but you can totally control your phone and enter data, etc. from your PC, and it's free!!
MY MOBILER v1.23 (06/15/2008) - FREEWARE
View your mobile screen on your desktop.
Control your mobile by using desktop keyboard and mouse.
Copy/Cut/Paste text between mobile and desktop.
Capture mobile screen.
Drag and drop files to your mobile.
Support ActiveSync / IP Connection
Support Mobile Explorer (File Browse)
http://www.mtux.com/
I found this screen capture software and used it and works great. It only took a few minutes to capture all 13 screens, etc.
SPB ScreenShot Capture Tool
http://www.smartdevicefreeware.com/spb-screenshot-capture-tool/
Hello Guys,
I'm pretty new to all the Custom Rom things around here...
Yesterday I've installed the new MoDaCo 3.0 version for my hero, i had 2.3 or what so ever. I installed the rom, and then formatted my sd-card up to EXT4 via the adb tool. I'm sorry i can't remember if i first formatted or i first put on the new rom.
The thing is: in the List it says that Apps2SD is fully included in the update. I was not able to find the changes.... i tried it my self afterwards by installing the 2 files with a terminal, but the app2sd says its not working i should read the tutorial.(which i have) although it says 100mb space free now... and before the update all my progs filled up to 30mb.
So Q1: how do i install this version right?
and Q2: i still don't get any animations for my htc Clock (with the flipping pages) and i couldn't find any preferences. how do i get it to work? (and is there a prog where i can choose all my preferences, i get the feel i can't change all the things in the HTC-Preferences Dialog.
I Hope someone understands my problems ;-)
can you please state the exact error message from apps2sd?
it should work automatically on mcr. try to partition your sdcard again (btw i'd suggest ext2), then wipe and reflash mcr. that's it, the rest is taken care of. if you still think you have problems please search for it, there are numerous threads where i explained in details how you can check whether it is working or not.
as for q2: can also be covered by a search. in short: no animations any more.
thanks for the input, search actually did help me out for the clock problem ;-) (no possible on modaco hehe)
and I'll try the formatting and re-rom again, hopefully it works.
thx!
great place here
I just recently bought an HTC HD2 in interest to converting it into an Android phone.
I don't quite understand all the "ROM" information people tell me, so is there a simple and noob friendly guide on how to put Android in an HTC HD2 that runs smoothly as in everything working? (I might be asking for too much..)
ATM there isnt a pure ROM based Android for the HD2. Its possible to dual boot your HD2 with Android.
While doing this you copy Android to your SD card and use a program to load Android into your phone memory by using Haret. With the Andoid dual boot all things of your phone can work very well, but you battery will drain very fast (lasts 1 day) and the lower section of your phone can heat up.
The heating up is normal because your SD card is working all the time (since thats the location of Andriod)
What to do first:
- search for a threat to install HSPL on your phone
- change your radio to 2.10.50.26.x
- download an Android ROM of the Android section
- copy the files to your SD card and run Haret (delivered with the Andoid files)
- Its possible to install a WinMo ROM that is smaller and boots faster into Android, EngeryROM is a good rom to do this.
Keep in mind that Android is not a full ROM install yet, but htey are very far in developing it. Battery wont last as long as normal (WinMo). SD card is heating up.
I would say wait a lil longer before you put Andriod on your phone. Dont get me wrong it works very well and also i would totally love it to fully switch. But as long it isnt a full ROM install i would wait before using it.
I need help, I searched the forums and I did everything the forums told me to do but no go. . Im trying to put android on my htc hd2. First I installed the spl, that went through without a hitch I downloaded everything, from the customRUU.exe, to radio 2.15, to a rom android sense, i tried flashing both not at the sametime changing them to RUU_signed.nbh, and when i run the ruu.exe it give me an error. When i try the other way, by changing them to LEOIMG.nbh and ptting it on my storage car, and shutting my phone off then turning it back on by holdong the volume button down with the power button all i get is the tri color screen with either serial or usb, nothing more, no image screen to continue, so i have to take out my battery and put it back in to restart my phone to normal. Im lost the process is very easy to do, but im having problem and i cant find anything in the forums to fix them nothing seems to be working. please help and sorry to be such a noob to this.
Also side note one user said i can us my tmobile rom, and radio, my current rom is like 3.14 and my current radio is higher the 2.08. just put android on my phone and run it. i put the folder in ran clrcad.exe, of course did nothing, then i ran haret.exe, it bootloaded to linux, now i phone is stuck on a blank screen with green htc lettering. I dont know why something so simple is giving me such a problem. I even looked at the vids on how to do, I did nothing different but no go.
Did you have memory card at 2gb memories minnimum? Maybe that is....android create a data image of 512mb to 2gb size,that is in the startup.txt file writing
Sent from my HTC HD2 using XDA App
You have looked every where but not the sticky??
I suggest you look at it again:
[REF] HD2 STICKIES | USEFUL INFO | POSTING RULES - Read Before Posting!
You should have NO problems after going thru it. Remember you are those very few that have problems. Read then you will find your answers.
Also, this is a Development forum, you should read the forum rules and such questions should be in the General section. Thanks Good luck!
memory card is at 16gig, as for sticky going to work now, ill check it later. Why do I have to be part if that little few? lol thank u
In startup text what does the last two lines say
Sent from my HTC HD2 using XDA App
which rom works best with cht2.0?
Just curious, how long did you waited at the "green htc" screen. During first boot, it can take up to 20 minutes to create the data files needed. I have to be patient. That screen usually indicate that it is working.
another, which android build did you try?
You are probably almost there. When you get the green htc letters on the blank screen, that is probably the time the image file is being created. This can take a good 10 minutes (according to the size of the image file being created. Your phone may seem stuck but its working in the background. Just leave it as it is for at least 15 minutes. If it stays like that then there must be another problem.
something tells me, you might not have hardspl installed yet...
Edit: Deleted
lacusxharo said:
something tells me, you might not have hardspl installed yet...
Click to expand...
Click to collapse
that was the first thing i installed on my phone. Also the screen i left it alone while i was working for about an hour, came back still the same green htc lettering. I am trying it again as we speak I switched to something else im using "Mdeejay_eVo_Sense_v._2.0_REVOlution", copying it to the storage card as we speak., Find out soon.
I just want to let you guys know I got it baby finally got android working. Thank you all for your help and patience. Only one problem so far, it drains my battery.
am facing the same issue...so what made it work..please let me know
zamtabs said:
am facing the same issue...so what made it work..please let me know
Click to expand...
Click to collapse
read the thread
hardspl
flash a custom rom
download an android build
drag and drop extracted android build to your storage card
select clrcad.exe and then haret.exe on your storage
How difficult is that?
zamtabs said:
am facing the same issue...so what made it work..please let me know
Click to expand...
Click to collapse
I didnt change my rom, or my radio I kept them all original tmobile. My radio was already higher then 2.08, and my rom was the newest from tmobile 3.14. All I did was format the sd card, downloaded Mdeejay_eVo_Sense_v._2.0_REVOlution extracted it, moved it to the sd card and thats it. Clicked on clrcad, then haret and after about ten minute it worked. The only bad thing was i left my phone on with android running and I fell asleep, and woke up with a dead battery, i thought my phone bricked lol thank god the other way around.
falustine said:
I didnt change my rom, or my radio I kept them all original tmobile. My radio was already higher then 2.08, and my rom was the newest from tmobile 3.14. All I did was format the sd card, downloaded Mdeejay_eVo_Sense_v._2.0_REVOlution extracted it, moved it to the sd card and thats it. Clicked on clrcad, then haret and after about ten minute it worked. The only bad thing was i left my phone on with android running and I fell asleep, and woke up with a dead battery, i thought my phone bricked lol thank god the other way around.
Click to expand...
Click to collapse
Now whatever you do, be sure to ignore anyone that tells you that it's your microsd card that's draining the battery. It's misinformation that's still be spread like it's 'The Android Gospel'.
Do yourself a favor and get SetCPU and CurrentWidget. There's a thread on SetCPU (google for it) and use the settings that you find there.
The most recent builds tend to not really need taskkiller, as 2.2 is pretty good at memory management.
For future help, it's best to post in the existing thread for whatever build you're using, instead of a OMFGHELPAAAaaaaa thread in the wrong place.
apallohadas said:
Now whatever you do, be sure to ignore anyone that tells you that it's your microsd card that's draining the battery. It's misinformation that's still be spread like it's 'The Android Gospel'.
Do yourself a favor and get SetCPU and CurrentWidget. There's a thread on SetCPU (google for it) and use the settings that you find there.
The most recent builds tend to not really need taskkiller, as 2.2 is pretty good at memory management.
For future help, it's best to post in the existing thread for whatever build you're using, instead of a OMFGHELPAAAaaaaa thread in the wrong place.
Click to expand...
Click to collapse
kool thanx ill check it out.
The original post for the easy instructions to root the NT are a mess. The original instructions for doing it on Windows aren't even complete. I started building the files by following the Linux version of the instructions since they actually made sense and had the files you were to get.
If I'm not mistaken though I ended up using this to root the nook although it wasn't really what I was looking for considering I had CM7 and I would get a boot choice to go nook or android. That all stopped when the sd card I was using freaked itself and failed leaving me stuck at the N screen unless I pulled the SD card. My intentions were to leave the NT stock and not mess with it and run Cyanogen on the sd card. What it appears I'm left with though (without installing a rom) is a co-mingling Nook OS and Android OS since I'm now able to choose a launcher and I have Android screens with those launchers in the Nook itself. Which this is kinda cool because I don't have to reboot the system to switch to the reader anymore.
I installed Launcher 8 to give it some WIN8 love and easy access for my fiancee whom uses a mouth stick to get around in android easier. My problem I'm having is the android system doesn't seem complete. I'm assuming there are gaps missing or something because things are slow and some things aren't working when the icon is selected. Which simulates the program isn't actually there or the files to make it work.
Obviously there wouldn't be a phone but there are other things that used to work with the dual booting CM7 installed on the old SD card that aren't working now.
Since I'm not exactly sure if the above is how I ended up rooting the device I don't even know where to go from here to adding anything to it.
I'm not a developer and loaded this thing up about this time last year. The scenery has changed over the year and I'm kinda lost with all this again. Spent most of the day yesterday trying to figure out where I was and really got no where. So hopefully someone get's what I'm talking about and can give me the push in the right direction.
Not looking to make it dual boot again because this is easier for my fiancee to use like it is. Just want everything to work right like it should. I couldn't tell you what version android I have on here because I never actually loaded an individual rom yet there is android functioning on the device. My idea was to get the newest android which isn't 4.4 yet and is actually from what I can tell that is working would be JB. Yet I have no clue what this thing is running on with the loader and such I have on it.
I'm not enirely sure what it is you want, You say you don't want dual boot, and yet you talk about the non-wotking sd card as if you actually want dual boot.
Anyway, IF you want dual boot you don't need to root it at all. Just burn an sd card with a ready-made CM10.x image, pop it in and boot up. Then choose either internal, stock boot or run from sd-card.
Here is a link to a page with ready-made sd card image file:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
(This guy, Succulent, has inages of later versions of CM10.x as well, but this is the one I had a link to wothout having to go look for it.)
If you want the Tablet back to fresh "out of the box" condition you can use a repart.img that you can find by looking around a bit. I have referred to it in several posts, but I don't have a link at hand right now, Google is your friend...
asawi said:
I'm not enirely sure what it is you want, You say you don't want dual boot, and yet you talk about the non-wotking sd card as if you actually want dual boot.
Anyway, IF you want dual boot you don't need to root it at all. Just burn an sd card with a ready-made CM10.x image, pop it in and boot up. Then choose either internal, stock boot or run from sd-card.
Here is a link to a page with ready-made sd card image file:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
(This guy, Succulent, has inages of later versions of CM10.x as well, but this is the one I had a link to wothout having to go look for it.)
If you want the Tablet back to fresh "out of the box" condition you can use a repart.img that you can find by looking around a bit. I have referred to it in several posts, but I don't have a link at hand right now, Google is your friend...
Click to expand...
Click to collapse
*The non working sd card*
It was running as a dual boot before with cyogen or something like that and it would be selectable to go to Nook or the CM7 Android. That card somehow just died and can't even be seen in Windows anymore (have an rma filed with Patriot).
I rooted the nook and now I have what appears to be a partial android OS running inside the BN Nook OS but things aren't functioning. (I prefer it like this vs the dual boot way) So it's like I need a gapps file or something. All settings links lead to the Nook OS settings page and nothing get's me to the Android settings which is why I state it appears to be a partial Android OS. I don't even know what OS version it is because nothing fully functions with the Android side of things. (Take the Launcher8 Loader I installed. No icons actually open what they should. Selecting an icon leads to that icons settings and not what it should be opening. I have the same loader on my Skyrocket so I know how it SHOULD function and selecting an icon to get options for it is not correct. You have to press and hold to get the button to set the icon options.)
You won't get "proper" Android just by rooting. For that you need to install CM x.x. Either install it internally or run it from sd (that you apparently don't want to do)
I have not followed the particular root process you used, but both of the ones I have used myself come with gApps included.
The ones I have used:
http://forum.xda-developers.com/showthread.php?t=1488035
Or
http://forum.xda-developers.com/showthread.php?p=21275927#post21275927
The first one (Brian’s) require a 2 GB card the other one (Albert’s) just needs a very small card. (I think 128 MB would do, but I don’t have any that small to try)
Both give good instructions in their topics.
Both install gApps.
asawi said:
You won't get "proper" Android just by rooting. For that you need to install CM x.x. Either install it internally or run it from sd (that you apprently don't want to do)
I have not followed the particular root process you used, but both of the ones I have used myself come with gApps included.
The ones I have used:
http://forum.xda-developers.com/show....php?t=1488035
Or http://forum.xda-developers.com/show...7#post21275927
The first one (Brian’s) require a 2 GB card the other one (Albert’s) just needs a very small card. (I think 128 MB would do, but I don’t have any that small to try)
Both give good instructions in their topics.
Both install gApps.
Click to expand...
Click to collapse
404 on the first link and not found on the other link. LOL Your having the luck I am.
LOL looks like you found out yourself.
scgt1 said:
404 on the first link and not found on the other link. LOL Your having the luck I am.
LOL looks like you found out yourself.
Click to expand...
Click to collapse
Edited links so they work now.
asawi said:
Edited links so they work now.
Click to expand...
Click to collapse
Brian's method looks a hell of a lot familiar like that may have been what I did instead but the listing of apps with his doesn't match what I have on the nook now: (only thing I didn't put in the list was what I installed off google play which is launcher8)
android reader
car home
chess
contacts
crossword
downloads
email
es file explorer
flash player settings
getjar
google search
home
home manager
home catcher
hulu plus
music player
my media
netflix
news and weather
nook friends
nook video
nookhwtest
nookviewer
nt hidden settings
pandora
play store
sound recorder
spare parts
splashtop remote
sudoku
superuser
talk
testcenterservice
twitter
That is all the installed apps that pull up under the Nook OS with using Launcher8 and swipping the homescreen to the left it pulls up a list of installed apps just like windows phone.
It must be brians anyway because I just opened the nook hidden settings and under the about Nook Tablet Hidden Settings it shows:
Contact information: [email protected]
Version 0.5.0
I'm just going to move this over here:
asawi said:
This is the development section. Not meant for Q&A. I've already told you how you can return the Tablet to out of the box condition over in that section.
Sent from my Nook HD+ using Tapatalk 4
Click to expand...
Click to collapse
It is the development section I am aware of that and can read. I'm in the 10.2 thread which is actually what I want running on the NT. So what better place to get the help for it then in the thread for it like everyone else has.
Actually you are incorrect as you say nothing about returning the tablet to stock out of the box. Must have been someone else your thinking of. I don't want it to be out of the box though. The nook OS was already setup with apps and books etc. I just want to reverse the rooting I guess to remove the stock android from it so I can then use the links you provided to create a correct root and dual boot using wait for it.....
CM 10.2
dup post
scgt1 said:
I
Actually you are incorrect as you say nothing about returning the tablet to stock out of the box.
Click to expand...
Click to collapse
Really?? Read the last two lines in my first post in this topic.
Also, there is a sticky on top of the topic list in the development section about what is meant to go there and what's not: http://forum.xda-developers.com/showthread.php?t=1499105
asawi said:
Really?? Read the last two lines in my first post in this topic.
Also, there is a sticky on top of the topic list in the development section about what is meant to go there and what's not: http://forum.xda-developers.com/showthread.php?t=1499105
Click to expand...
Click to collapse
Ok I stand corrected on that matter, but stock out of the box isn't what I want.
I'm not sure you can undo what you've done without loosing content. But as long as you backup your sideloaded stuff, your BN books and apps can be dowloaded at any time.
I suppose you can stay rooted and just disable your alternative launcher and what have you, but you said something about your system being slowed up, and I susoect fixing that without a wipe of some sort would be difficult. Could be wrong though snce I haven't dealt with that myself. Let's hope someone that knows better might come along with advice more to your liking.
While waiting for that you can always make one of the CM 10.x sd card images and run it.It will work completely independent from your trublesome stock OS.
System isn't slow at all also anything side loaded came from B&N so could also be redownloaded like the books. I was just hoping to keep all that intact as it was. There just aren't certain things working that should is all. I'm sure if I was a dev and understood all this stuff more clear I could fix it. I would rather take the easy cheesy way out and just redo it. lol Too much stuff around the house falling behind while messing with this thing.
scgt1 said:
...
Not looking to make it dual boot again because this is easier for my fiancee to use like it is. Just want everything to work right like it should. I couldn't tell you what version android I have on here because I never actually loaded an individual rom yet there is android functioning on the device. My idea was to get the newest android which isn't 4.4 yet and is actually from what I can tell that is working would be JB. Yet I have no clue what this thing is running on with the loader and such I have on it.
Click to expand...
Click to collapse
The BN stock ROM is based on Android v3.2 ("Honeycomb"). Rooting it essentially enables you to install additional apps beyond those that came with the stock ROM, either via the Playstore or by side-loading & installing the apps' .apk files (rooting packages/tools themselves typically add some commonly used apps (Email, Playstore, etc.) to get the user started).
The risk of using rooted stock ROM on the NT (especially as BN won't be releasing any more update for it) is you're stuck with the Android 3.2 base, thus as developers' support for 3.2 wanes over time you won't be able to install newer apps or even newer updates of many current apps. This same "Android version obsolescence" consideration also applies to CM7 and CM9.
As such I think it make the most sense to install CM10 to replace the stock ROM internally on emmc. If you value stability over having the latest/greatest bells/whistles, try Succulent's CM10.0 version dated 12/31/12, or the CM official 10.1.3.
digixmax said:
The BN stock ROM is based on Android v3.2 ("Honeycomb"). Rooting it essentially enables you to install additional apps beyond those that came with the stock ROM, either via the Playstore or by side-loading & installing the apps' .apk files (rooting packages/tools themselves typically add some commonly used apps (Email, Playstore, etc.) to get the user started).
The risk of using rooted stock ROM on the NT (especially as BN won't be releasing any more update for it) is you're stuck with the Android 3.2 base, thus as developers' support for 3.2 wanes over time you won't be able to install newer apps or even newer updates of many current apps. This same "Android version obsolescence" consideration also applies to CM7 and CM9.
As such I think it make the most sense to install CM10 to replace the stock ROM internally on emmc. If you value stability over having the latest/greatest bells/whistles, try Succulent's CM10.0 version dated 12/31/12, or the CM official 10.1.3.
Click to expand...
Click to collapse
So CM 10 can replace the current android OS inside Nook? Or are you saying CM 10 will replace the Nook OS all together if put on the emmc?
scgt1 said:
So CM 10 can replace the current android OS inside Nook? Or are you saying CM 10 will replace the Nook OS all together if put on the emmc?
Click to expand...
Click to collapse
It will alltogether replace the Nook OS. As said in one of the posts in the development section thread they are mutually exclusive.
If you want to keep any of the original Nook functions you cannot run another Android veresion except from sd-card (meaning dual boot).
asawi said:
It will alltogether replace the Nook OS. As said in one of the posts in the development section thread they are mutually exclusive.
If you want to keep any of the original Nook functions you cannot run another Android veresion except from sd-card (meaning dual boot).
Click to expand...
Click to collapse
That's what I thought but the other user made it seem like CM 10 would replace the Honeycomb OS. So that leaves with with waiting for other input on the possibility to unroot without going to complete stock on the Nook..........
scgt1 said:
That's what I thought but the other user made it seem like CM 10 would replace the Honeycomb OS. So that leaves with with waiting for other input on the possibility to unroot without going to complete stock on the Nook..........
Click to expand...
Click to collapse
Unroot without going to complete stock??
Your options:
Unrooted = stock.
Rooted stock (what you run now) = stock but with access to system files and ability to use for example Google Play store.
Install CM 10.x internally = completely replacing Nook OS.
Dual boot: Running CM 10.x from sd card, leaving the Nook OS (rooted or unrooted, either works) internally. Remove sd-card or reboot through Cyanoboot (you can leave the card in the device) to get to Nook OS.
asawi said:
Unroot without going to complete stock??
Your options:
Unrooted = stock.
Rooted stock (what you run now) = stock but with access to system files and ability to use for example Google Play store.
Install CM 10.x internally = completely replacing Nook OS.
Dual boot: Running CM 10.x from sd card, leaving the Nook OS (rooted or unrooted, either works) internally. Remove sd-card or reboot through Cyanoboot (you can leave the card in the device) to get to Nook OS.
Click to expand...
Click to collapse
Yea haven't heard back from anyone on the returning to stock without the complete reset so It looks like I will be moving books over in the near future.
So I'm getting back onto this thing and finishing it up either tonight or tomorrow.
Resetting the Nook to stock can all be done via the nook settings correct? IE no sd card needed.