[Q] Rooting Moto. Atrix - Atrix 4G Q&A, Help & Troubleshooting

I will start off by apologizing for my ignorance, but I am new to rooting. I have had my Atrix for i guess a month or two now and I am wanting to root it. I just dont know where to start for rooting I've read that superoneclick isnt good to use and I tried aRoot but when i opened titanium backup it is saying it isnt rooted. Does anyone else have links to other threads helping with rooting or a Faq or tutorial on how to? Im not sure how to even get the files onto my phone and such and help will be greatly appreciated thank you all very much!

the superoneclick and aroot threads have all of the info you need to root your phone. if you cannot manage to do it by following the instructions already provided i really dont think you should be messing with your phone. they are basically one click solutions. i have tried both and they worked as described. you might want to go to youtube and watch videos of it being done

hondaguy said:
the superoneclick and aroot threads have all of the info you need to root your phone. if you cannot manage to do it by following the instructions already provided i really dont think you should be messing with your phone. they are basically one click solutions. i have tried both and they worked as described. you might want to go to youtube and watch videos of it being done
Click to expand...
Click to collapse
Ive done super one click and it stops doing anything at psneuter so idk what to do about that and ive dont aRoot and it installs superuser and everything go through the process and says its rooted but when i opend titanium backup to verify that it is rooted it says it is not...That is not my fault.

Hxcmetal said:
Ive done super one click and it stops doing anything at psneuter so idk what to do about that and ive dont aRoot and it installs superuser and everything go through the process and says its rooted but when i opend titanium backup to verify that it is rooted it says it is not...That is not my fault.
Click to expand...
Click to collapse
Either you didn't enable Debugging or you're running 4.1.57.

NoNameAtAll said:
Either you didn't enable Debugging or you're running 4.1.57.
Click to expand...
Click to collapse
Ah Im running 1.57...actually didn't know that affected it. tonight im going to attempt to flash back to 1.26

Hxcmetal said:
Ah Im running 1.57...actually didn't know that affected it. tonight im going to attempt to flash back to 1.26
Click to expand...
Click to collapse
Good luck. Just make sure to use a short filename if you have problems with RSDLite. Some people aren't able to flash because of that. I was one of them but it flashed just fine.
Enable Wifi and enter your MotoBlur ID and you'll be able to go ahead and root on 1.2.6. Then you can check for updates and run the update. Use GladRoot as there's a rooting batch file, as well as another file to run after you upgrade. It also enables Sideloading (non-market apps) as well as tethering if you so wish.
If you can get ADB working then you won't have any trouble.

bongd said:
Good luck. Just make sure to use a short filename if you have problems with RSDLite. Some people aren't able to flash because of that. I was one of them but it flashed just fine.
Enable Wifi and enter your MotoBlur ID and you'll be able to go ahead and root on 1.2.6. Then you can check for updates and run the update. Use GladRoot as there's a rooting batch file, as well as another file to run after you upgrade. It also enables Sideloading (non-market apps) as well as tethering if you so wish.
If you can get ADB working then you won't have any trouble.
Click to expand...
Click to collapse
This seems so much more difficult than jailbreaking haha
Hmmm well Im going to try and get this to flash back before i worry about rooting -_-

This is a fantastic guide, I highly recommend it:
http://forum.xda-developers.com/showpost.php?p=12631216&postcount=2911

Related

Question On Root

I used GladRoot to update to 1.57 now i want to upgrade to .83 and dont know how about doing it. I hear about this gingerbreak and gingerbread stuff but have no idea about it. Any ideas? if i update i will lose my root right? thanks
http://forum.xda-developers.com/showthread.php?t=1046626
here is the guide on how to do it.
if not fluent in ABD follow the guide by ken at the bottom
Originally Posted by kennethpenn View Post
Hey everyone, I made a little tool that does all of this stuff for you.
Go ahead and download then run.
http://bandbinnovations.com/xda/GingerBreak.exe
Click to expand...
Click to collapse
just place ur phone in usb debugging mode and run the EXE. it will push gingerbreak to your phone. make sure u backup your SD card then run the app. you will then have root
hope that helps
wishb0n3 said:
I used GladRoot to update to 1.57 now i want to upgrade to .83 and dont know how about doing it. I hear about this gingerbreak and gingerbread stuff but have no idea about it. Any ideas? if i update i will lose my root right? thanks
Click to expand...
Click to collapse
I just used Afterupdate from GladRoot and worked great.
Im new to android what is ADB lol.. i just used the stock 26 or whatever when i rooted to newest one before the new one that just came out (83). So i can just do what you said straight off the gladroot for my current (57). Let me know the run down. Im At&t thanks alot. COming from an iphone so things are alot different lol
wishb0n3 said:
Im new to android what is ADB lol.. i just used the stock 26 or whatever when i rooted to newest one before the new one that just came out (83). So i can just do what you said straight off the gladroot for my current (57). Let me know the run down. Im At&t thanks alot. COming from an iphone so things are alot different lol
Click to expand...
Click to collapse
Update to 1.8.3, run GingerBreak, and viola. If you don't have sideloading, or are waiting for a ROM to provide it, push GingerBreak APK by ADB install or GingerBreak.exe (which does it for you).
Well i tried to update from my phone after i hit install to newest update.. it reboots and comes back with a exclamation point in a triangle and the little green android guy. Tried it twice now, had to take out my battery to get back to my phone. Any advice would be nice. thanks
wishb0n3 said:
Well i tried to update from my phone after i hit install to newest update.. it reboots and comes back with a exclamation point in a triangle and the little green android guy. Tried it twice now, had to take out my battery to get back to my phone. Any advice would be nice. thanks
Click to expand...
Click to collapse
What do you have on your phone? Is it rooted, do you have a custom ROM installed...we need more details before we can help you out. If you have GingerBlur or any other custom ROM installed, what happened to you is normal. You'll have to flash back to stock before you can install the update. Or you can flash the update itself.
More information would be very helpful.
Thanks for the quick response! im not quite sure on what roms are really lol. I dont think i have any installed. This is what i did. Got my phone it was already on 26. I used Gladroot to get to .57, then i was rooted. Now i want to get the new update. So i tried to update straight from my phone and it did what i had said. So i have to flash back? Last time i tried to flash i couldnt seem to get it to work. Thanks alot for the help.
So basically im on a rooted .57 from factory 26. I just used gladroot straight from when i got my phone to root it.
If you can give me any info on this it would be much appreciated. Thanks

[Q] Root method for gingerbread?

So, I am new to this site and to the android community. I apologize if I sound stupid to any of you but if you aren't going to help I'd appreciate it if you just ignored me.
Anyway, I got my Atrix a couple days ago on AT&T and started learning about rooting and such. Everything on it is still stock, last night I upgraded to Gingerbread from Froyo and I'd just like to know if there's any specific rooting program, method I can use right now for 4.5.91 Also, when I upgraded I lost my music player widget, is there I can get it back without going back to Froyo?
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
will there be any severe consequences if I screw up?
Use gingerbreak.
Sent from my MB860 using XDA App
TheToiletSpaula said:
Use gingerbreak.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I've read that gingerbreak doesn't work with this version. I'll look it up though.
phobos512 said:
follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my mb860 using xda app
Click to expand...
Click to collapse
^^^^^ only way to root gb and probably the best way if there are other methods
savier420 said:
^^^^^ only way to root gb and probably the best way if there are other methods
Click to expand...
Click to collapse
cool, just one question. Am I supposed to have the device connected to my computer the whole time? and if not between which steps should I connect/ disconnect it? also, when I put the root.img in the C: folder, do I put the zip file or just the .img inside of it?
phobos512 said:
Follow the procedure in the second link in my signature. Since you had root before you updated go into settings manage applications clear app data for superuser.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
PSY0NIC said:
If you are just trying to "root" your phone only, YES, this is the best method.
Thanks for posting this and providing the link in your signature. I was crapping myself reading the other post about how the new updates bricks your phone but no one said if you are just looking to root your stock OTA's you'll be fine. So, thanks again. They should sticky this under "If you are just running stock and want to root without unlocked BL/pudding use this"
PSY0NIC
Click to expand...
Click to collapse
Since this is the 1st time I've seen some one say it this way....
If you are just trying to "root" your phone only, YES, this is the best method.
Brand new phone, all stock... just want root.... use gingerbreak?
Sent from my MB860 using XDA Premium App
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
hambone123 said:
Hi all,
Renaissance613, can you post if you had success and if you ran into any problems? I have the same setup as you (2.3.4/4.5.91) and I'm nervous about rooting so soon after the update (I just installed it).
Also, I'm wondering if I will have to undo this root when another automatic update gets pushed down, or if it will just unroot like my gingerbreak root did. I don't have/intend to use any ROMs. I like stock phone with phone-pulled updates and rooted.
In any case, thanks for the link phobos512 - and thanks to this community of developers and users. You guys are awesome.
Hambone~
Click to expand...
Click to collapse
I'm about to try it but I'm still confused about a few things like when exactly to connect or disconnect my phone and what to do after I've entered all the commands on my computer, will it install by itself? This is my first time rooting a phone, and my first time even owning an android so I want to make sure I know exactly what I'm doing
I hear you man, it's nerve wracking to worry that you're going to brick your phone. I did the gingerbreak on the last release and it worked perfectly. I'm sure this method will work fine as well, as you said I just want to be sure I'm doing the right thing for my goal: stock phone/downloaded updates/rooted. Best of luck, and thanks to anyone who gives us noobs some more reassurance.
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got, before i updated to the OTA GB i had BL unlocked and rooted, just flashed back to 1.2.6 to be rid of root and unlocked BL, then just went throught the OTA updates to get to GB and im loving it, dont really care to flash any other custom roms, BUT BEWARE DOING THE OTA TO GB AND UNLOCKING THE BL THEN TRYIN TO FLASH BACK TO A STOCK ROM WILL HARD BRICK SO DO YOUR RESEARCH so if u dont want a hard bricked phone dont do the ota stick to custom roms and ignore all OTA'S
so I got through the fastboot reboot command, phone booted back up automatically, then put the phone into debug. Then typed in the adb shell code and said the specified path could not be found.
Now I was still in the command prompt that said the c:/root
What did I do wrong?
So, adb says it is a bad path?? Do this instead..it is easier and it works -- I did it this way last night!
After "moto-fastboot reboot", once your phone has completely rebooted, go to the Android Market and download and install "Terminal Emulator." Once it is instslled and you have opened it, enter the EXACT SAME commands that you were going to type into the Adb Shell..once again, type in the commands VERBATIM. After the last command, there should be a message saying (in terminal emulator) that it was successful! Congrats, you have achieved root access on the AT&T issued stock Gingerbread 2.3.4 build! I hope it works for you!
~Eric
savier420 said:
this is by far the best method to root on gingerbread, but i dont see any reason to root but to only flash custom roms, i only needed root pre-GB to allow non market apps, and the new GB OTA UPDATE allows non market apps, so im pretty happy with wat i got.
Click to expand...
Click to collapse
I'm very vanilla. I root pretty much entirely for free wireless tethering and being able to delete bloatware.
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
aroca1978 said:
Hello everyone, I am still a little confused between what will or what will not brick my phone. I appreciate your responses.
I am still in froyo 2.2.2 (firmware 1.8.3), rooted using GladRoot method (rooted in previous firmware, then upgraded to 1.83 and used the AfterUpdate.bat.
I am afraid to do the updrade to GB because after reading a looot of threads here on this I am completely confused on what will brick my atrix and what not. If I upgrade to GB OTA, will that brick my phone? if it doesn't brick it, what does? if I upgrade to GB OTA will I able to root it? what method should I use?
thanks a lot
Click to expand...
Click to collapse
Updating to GB won't brick your phone. After updating to GB you can't down grade to older OS (like the one your on right now) that would brick your phone. So as long as you don't plan on going back to a past OS version (and I don't know why anyone would) you'll have no problems at all. As for Rooting >follow this link< and follow the instructions there after you update to GB. It works perfectly, you don't have to unlock your BL or anything else like that to just have Root on GB. Hope this helps.
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
For Questions about BL Unlocking
aroca1978 said:
Thanks!!! That was the response I was looking for
Now, what method should I use if I were planning to unlock the bootloader?
Also, if something goes wrong and I need to reinstall the upgrade (or better, flash with GB again with a spf file) will that not brick by atrix either?
Click to expand...
Click to collapse
Click on the link below, that thread will give you the answers and files your looking for.
> Click Here <

[Q] Preferred root method for Bell Atrix 2.3.6 [A] Manual way

Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.

[Q] unlock and root tf201 9.4.2.21

Hi all.
Ok, I'm fairly confused as to how to go about rooting my transformer prime 9.4.2.21 tablet.
As I understand it, I should be able to unlock the tablet, then install a 'ROM' that is already rooted, which means..I can boot into the 'ROM' and have root access??
So, I set out and unlocked my tablet (I'm aware of the warranty repercussions). Done. Now I want to root the tablet so I can install Ubuntu or perhaps Debian on it...does anyone know how I go about this?
I'm SURE this has been asked, I just can't seem to find it...I'm also quite new to the mobile 'hacking' world, and I'm a bit confused about all the buzz words (i.e. 'flashing a ROM', etc)..
I appreciate any help!
Cheers
I am pretty sure the next step after unlocking it is installing CWM, then using that to install the ROM of your choice.
Anyone else want to chime in here?
A.) Unlock.
B.) Flash ROM (you may want to pick before unlock0.
C.) Enjoy.
Unless it says otherwise you can assume any ROM that isn't from the manufacture, is rooted. The development section has ROMs, unlock, and Ubuntu crap. I use Debian in a chroot rather than native, and forgo X11. You may have to search for some things.
Can you point out a thread on how to install CWM from an unrooted device? Been searching,, but every thread points to Viperboy's thread, which will not work on .21.
aawshads said:
Can you point out a thread on how to install CWM from an unrooted device? Been searching,, but every thread points to Viperboy's thread, which will not work on .21.
Click to expand...
Click to collapse
You can't install CWM if you haven't unlocked. Root doesn't have anything to do with unlocking.
I suggest using Viperboy's tool to unlock your device. Be careful to follow ALL the directions and you'll be just fine.
Now I want to root the tablet so I can install Ubuntu or perhaps Debian on it...does anyone know how I go about this?
Click to expand...
Click to collapse
Rooting and unlocking are different. If you are unlocked, research which ROM you'd like to install and follow the directions in that thread. Virtually every ROM thread has the directions listed. There's even a thread if you want to try Ubuntu, though it has limited functionality right now.
Personally, I like Jermaine's AOKP ROM. It is really fast and smooth.
That's all well and good, how do you install CWM after unlocking? All of the posts say to use viperboy's tool, but it is not available at this time, the link is dead.
On version 4.5 that I already have option 5 unlock says "MUST BE ROOTED!!"
Are you saying it works without root? Or will the Fastboot method here work?
ok mcliar, I found in another thread from you this:
EDIT: I fixed it! I was able to pull an .apk of OTA Voodoo Rootkeep from a previous Titanium Backup file. I installed the app, and it restored root for me! Its possible that I was already still rooted, but without the ability to d/l apps I couldn't do anything about it. Anyway, I'm back with a rooted .21!
I have a similar situation, lost wifi, did a factory reset, lost voodoo and now can't reroot. How did you pull the apk and install it on the prime?
aawshads said:
That's all well and good, how do you install CWM after unlocking? All of the posts say to use viperboy's tool, but it is not available at this time, the link is dead.
On version 4.5 that I already have option 5 unlock says "MUST BE ROOTED!!"
Are you saying it works without root? Or will the Fastboot method here work?
ok mcliar, I found in another thread from you this:
EDIT: I fixed it! I was able to pull an .apk of OTA Voodoo Rootkeep from a previous Titanium Backup file. I installed the app, and it restored root for me! Its possible that I was already still rooted, but without the ability to d/l apps I couldn't do anything about it. Anyway, I'm back with a rooted .21!
I have a similar situation, lost wifi, did a factory reset, lost voodoo and now can't reroot. How did you pull the apk and install it on the prime?
Click to expand...
Click to collapse
I had a backup apk from titanium backup. I'll attach the apk so you can see if it works for you.
Yes, Viperboy's tool will unlock and install CWM without root (EDIT: come to think of it, I was rooted when I ran this. You can follow this if it doesn't work for you--->). Alternatively, you can use the ASUS tool itself, and then follow this thread to install CWM.
seems like everything needs root...
Ok...
So, I need to 'Flash a ROM'...right. I'm looking in the development section, and the ones I'm looking at require CWM to be installed..but that (from what I can find) requires root to install...
There was a mention of ViperMOD. However, from what I can tell that program will install CWM after you root the device, which it can't for me, as I'm running .21.
I've also read several mentions about using Rom Manager. I installed the free version, and tried to install CWM that way, but it failed with 'An error occurred while attempting to run priviledged commands', presumable because I need to root the device first.
Soo...it really looks like I need to root the device before I can do anything. Is this incorrect? It seems like it is, but when I look into the suggestions listed here I seem to run into a brick wall because I need a rooted device...
I appreciate all the suggestions guys, I really want to get stuff working on my TFP. Any help is (as always!) appreciated.
Thanks
McLiarpants said:
I had a backup apk from titanium backup. I'll attach the apk so you can see if it works for you.
Yes, Viperboy's tool will unlock and install CWM without root (EDIT: come to think of it, I was rooted when I ran this. You can follow this if it doesn't work for you--->). Alternatively, you can use the ASUS tool itself, and then follow this thread to install CWM.
Click to expand...
Click to collapse
oops sorry, I missed that CWM link...I'll check that out.
I have been researching all day, you will need to use fastboot in order to install cwm for the first time if you don't already have root. It will be what I use if I cannot get this titanium backup apk to work.
Mcliar, I appreciate you getting me the APK. I will let you know how it goes.
Could you post the backed up "su" for "OTA Voodoo Rootkeep" (i am guessing it stores the file in the application folder). I am wondering if it would be able to use this back to root the TF201
thanks
k

[Q] ICS update- must unroot razr

cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
snoballz said:
cant really search for this seeing as i wanted to ask the developer directly but i cant due to new user restrictions but anyway...
i downloaded the generic shell helper from bunny... GSH-RC2.rar to be exact
and my question is will this program be able to disable root regardless of the method used?
before you ask, no i did not root the phone myself and the person that did it for me is out of touch. i do beleive he mentioned Zerg- if that helps at all.
thanks for the help guys
Click to expand...
Click to collapse
Though you don't need to unroot to take the update here are some instruction to unroot.
I don't know if that will unroot you, but I do know that an app called Supersu will.
Step 1. Download SuperSu from the market
Step 2. Delete Superuser.apk from /system/app
Step 3. Open up Supersu and update Su binary.
Step 4. Scroll all the way to the right and go to the bottom
Step 5. Select Permanent Unroot.
Your device will be unrooted!
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
snoballz said:
well the reason is that ever since i had the phone unrooted, it wouldnt allow me to update the phone, as it was installing the update it would say update failed. im not sure if theres a difference between unrooting and "returning to stock" as my cousin put it.
anyway ill get on that right now and see where that puts me.
thank you so much
** actually before i do anything, i wanna clarify if unrooting is the same as returning to stock.
ive never done this before so please bear with me lol, i guess whats most important is that i dont lose the photos i have....contact can just be re-synced on google
Click to expand...
Click to collapse
No, unrooting and stock are 2 different things. Unrooting, obviously, just ranges away root privileges. you can think of returning to stock as re-installing windows, like you just bought the phone.
Photos should be fine, a they should be stored on your external SD card. If you are worried about losing your pics, just plug your phone into a computer and copy your pics to your computer.
Sent from my DROID RAZR using XDA
Questions go in Q&A

Categories

Resources