Hi, i`ve download cm7 v014 and v015 i have tried all 2 ROM`s.
Unziped v014, now i got this: radio unknow - wifi unknow - baseband unknow...
Tried v015 same Problem...
I have test wifi but then it goes reboot all time.
On v015 is USB working, but how i get radio/wifi/baseband ?
Yea sorry im noobie (-____-)'
But thanks alot if you can help me
U need to flash the correct basband through flashtool, which is baseband .52. I can give more info and links for flashtool wen i get to a computer tonight.
Do U have the phone rooted and have the latest version busybox and xrecovery right?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Voelker45 said:
U need to flash the correct basband through flashtool, which is baseband .52. I can give more info and links for flashtool wen i get to a computer tonight.
Do U have the phone rooted and have the latest version busybox and xrecovery right?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Click to expand...
Click to collapse
Yup got rooted and last busy and xRecovery version...
But i`ll try the baseband .52 hope it will work, (i`ll try now)
Related
Hey all, i need help installing a custom kernel. I dont quite understand what i need to do. Am running Wolfbreaks CM and under his post, there were instructions to install baseband 52 and patch before installing kernel. I am currently on baseband 54. Do i just flash the kernel or do i still have to install baseband 52 over my mod?
Sent from my X10i using XDA Premium App
You should flash the correct baseband using flash tool. Then do an xrec backup. Flash the custom kernel you want to use using xrecovery and reboot. You can verify that you are running the custom kernel by going to the about phone section of settings. If you choose to revert to the stock kernel you can restore your previous backup using xrecovery
Sent from my X10 TripNMiUI using XDA Premium App
So flashtool is the only way to flash baseband? And i install the kernel via xrecovery like normal? Thanks.
Sent from my X10i using XDA Premium App
You got it!
Sent from my X10 TripNMiUI using XDA Premium App
Thanks but i have another question. by the end of flashing custom kernel, i should be having baseband .52 with custom kernel and running wolfbreak's custom rom. Will there be any incompatibility? Cause i was having baseband probs an hour ago and just reflashed WB's rom. Will there be no problems? Or should i flash yet a new baseband after custom kernel installation? like .58 or .54?
EDIT2: Apparently i was having probs with direct update to v06..had to go with increments from v54 to be on the safe side..trying for the last time today to get that kernel on..
flash baseband with flashtool and custom kernel with xrec its easy bro
i recently shifted from Nokia to Android and i rooted my X10i today , did most of the tweaks but the issue is that i am confused between roms and firmwares , whats the main difference ? yeah also lead me to a rom for x10i
p.s: my first post on XDA
Well for roms whats the difference? Well customs roms are made my nice people here on xda and the firmwares from sony if im wrong correct me and a rom i'd suggest you its the best 2.2 stable and fastest rom its called freex10 madr by zdzihu look for it in the developement section and also you might wanna try wolfbreaks one it has more customisation and welcome to xda buddy
Sent from my X10i using XDA Premium App
you can use Trip rom as well , its very cool
i meanyt to say that if i install any rom will i loose my generic se firmware or data ?
You can always go back to general SE firmware by clicking repair in SEUS.
The data on your sdcard is usually safed when changing between ROMs. But to be sure you can make a backup in xRecovery. Or use an app like Titanium backup or My Backup Root.
Owner of Post,
Do you have the latest version of busybox installed yet and xrecovery yet, because if you don't, I or somebody else can help you. So post again and if you need it and I will post some links for you to use.
i don't have e'm
sxrmafia said:
i don't have e'm
Click to expand...
Click to collapse
Here is flashtool that will help with many things with the x10 like rooting, new se firmwares, installing busybox, ect.
What is your baseband? I need to know before you do the following below.
http://forum.xda-developers.com/showthread.php?t=920746
and here is the how to to use flashtool.
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
since your phone is already rooted, install busybox with flashtool first then xrecovery with this link.
http://forum.xda-developers.com/showthread.php?t=859571.
then pick on of the lovely ROMs with with the correct baseband you have.
im on 2.1.54
sxrmafia said:
im on 2.1.54
Click to expand...
Click to collapse
Good. Now you can use most if not all 2.2 ROMS. Go the busybox step then.
Sent from my X10i using XDA Premium App
by the way, it doesn't matter if your phone is X10a or X10i. that just means your phone hardware frequency is different. you can use any custom ROM. I recommend Trip's GB MiUI ;-)
Sent from my X10 TripNMiUI using XDA Premium App
u should try wolfbreak's custom rom in the android development section since your baseband is on .54 if not you have to take the trouble to flash your baseband to .49 or 52 for trips rom
Thanks Guys
I've tried many .ftf 2.1.1.A.0.6 files, and everything installs fine with flashtool, but when i try to root with z4root, i get blocked. I couldn't root any so far.
Can you provide a .ftf file of kernel 2.1.1.A.0.6 and baseband 015 that can root? Thanks anyway, xda!!!
And it's nothing wrong if i have baseband 015 with 2.0.a.504, right?
The requirements of the roms are to the the baseband 015, not the kernel, right?
I have 2.6.29
Anybody?
Sent from my U20i using XDA App
for root 2.1.1.A.0.6 use superoneclick then if you want to install costum rom you mus have baseband 015 and build version 2.1.1.A.0.6.
Thanks, but I knew that already. The roms work also fine on baseband 006, but you cant use all features, like apps to sd. But that's not the problem.
I tried to root an original 2.1.1.a.0.6 se rom and it couldn't root!!!
I tried universal androot, z4root, superoneclick, but just didn't root.
I found this thing: http://forum.xda-developers.com/showthread.php?t=906742
Can someone confirm that it can root, I tried 6 2.1.1.a.0.6 builds and neither rooted!
nilseby said:
I've tried many .ftf 2.1.1.A.0.6 files, and everything installs fine with flashtool, but when i try to root with z4root, i get blocked. I couldn't root any so far.
Can you provide a .ftf file of kernel 2.1.1.A.0.6 and baseband 015 that can root? Thanks anyway, xda!!!
And it's nothing wrong if i have baseband 015 with 2.0.a.504, right?
The requirements of the roms are to the the baseband 015, not the kernel, right?
I have 2.6.29
Click to expand...
Click to collapse
Just flash a custom rom I surgest cm7 and they come pre rooted
Sent from my GT-I9000 using XDA Premium App
p34nuTT said:
Just flash a custom rom I surgest cm7 and they come pre rooted
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
You really don't get it, do you?
I managed to root that firmware via FlasherTool. It's just an one click button on the same app you installed the firmware mate. Don't you see it? How came you missed it?! xD
Sent from my U20i using XDA Premium App
There is one little problem. I DIDN'T MISS IT!!! Wasn't that stupid , but when i try to connect the phone to computer with usb debugging it says driver se01 not succesfully installed! That's why i can't root with super one click!
that's not normal^^
flash your phone with seus again
try to root
flash a older FW with the flashtool an try to root
try to flash a FW wich is pre-rooted
one of these ways must be work
flex96 said:
that's not normal^^
try to flash a FW wich is pre-rooted
one of these ways must be work
Click to expand...
Click to collapse
That's what I'm trying now! Can someone confirm this rom?
http://forum.xda-developers.com/showthread.php?t=906742
Look, close SEUS when installing, of course DISABLE DEBBUG MODE and try that again. It 100000000000% works! I have accomplised that! I confirm that!
Sent from my U20i using XDA Premium App
You guys reeeeeeeeaaaaaalllllllyyyyy don't get it!!!
I said a bullsh*t above... xD
See the following and all your problems will be solved :
http://forum.xda-developers.com/showthread.php?t=1125587
[FIRMWARE]2.1.1.A.0.6 Greek .ftf+.sin files. Install the .6 kernel with 015 baseband!
Sent from my U20i using XDA Premium App
I have x10 with generic 2.1 (rooted).how can I install the custom kernel on it .....
Sent from my X10a using XDA Premium App
You'll need the flashtool which you can get from here:
http://forum.xda-developers.com/showthread.php?t=928343
Take your time reading & learning the posts.
You'll also need XRECOVERY which you can install from the flashtool. How to instructions are also on the link above.
Then you'll have to decide which custom ROM to install. Here are 2 examples of custom ROMs which gives you the option to install with STOCK or CUSTOM KERNELS.
If you want to stay on 2.1:
http://forum.xda-developers.com/showthread.php?t=941745
If you want to try 2.2:
http://forum.xda-developers.com/showthread.php?t=1119508
I have winzip file of cyanogenmod 7 .can I install it with xrecovery...
Sent from my X10a using XDA Premium App
gh2212 said:
I have winzip file of cyanogenmod 7 .can I install it with xrecovery...
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
I want to say yes but I have to check it out to be sure. Can you provide a link to the thread where you got it from?
Sent from my X10i using XDA App
forum.xda-developers.com/showthread.php?t=911364
Sent from my X10a using XDA Premium App
I also hve zip file of zkernel .but donot know how to install it.....and which baseband is recommended for zkernel
Sent from my X10a using XDA Premium App
Hi All,
I've X10i [Stock FW 2.1 Update 1 ; BB 2.1.54 ; Kernel 2.6.29 ; Build 2.1.A.0.435] Already RooTed by Z4RooT, with XRecovery, Busybox & SU Installed.
1. If I Flash it with Costum ROM..can I still use SE PC Companion to UpDate My Phone later in case there's an UpDate..?
2. Is EWJet xKernel/zKernel compatible with My Phone Spec..?
Many Thanks in Advance Bro..;-)
◀●☜【Sent From RooTed 『ShadowS™X10i』 on Èclair 1st Update Using XDA App】☞●▶
gh2212 said:
forum.xda-developers.com/showthread.php?t=911364
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
Yes you can flash that through xrec. When you download the file, unzip it to your PC and you'll see an APPS folder, BASEBAND folder and update zip file. Make sure you use BB52 otherwise that rom will not work. If you look in the basband folder, it actually includes the flashtool so all you have to do is flash the included BB then reboot in xrec to flash update.zip.
gh2212 said:
I also hve zip file of zkernel .but donot know how to install it.....and which baseband is recommended for zkernel
Click to expand...
Click to collapse
The zkernel you'll have to use on a different rom that's compatible with it because the CM7 rom that you asked about above contains it's own customer kernel.
Shadows.X10i said:
Hi All,
I've X10i [Stock FW 2.1 Update 1 ; BB 2.1.54 ; Kernel 2.6.29 ; Build 2.1.A.0.435] Already RooTed by Z4RooT, with XRecovery, Busybox & SU Installed.
1. If I Flash it with Costum ROM..can I still use SE PC Companion to UpDate My Phone later in case there's an UpDate..?
2. Is EWJet xKernel/zKernel compatible with My Phone Spec..?
Many Thanks in Advance Bro..;-)
◀●☜【Sent From RooTed 『ShadowS™X10i』 on Èclair 1st Update Using XDA App】☞●▶
Click to expand...
Click to collapse
1. You'll have to flash black your stock firmware before SE update would work
2. You got bb54 but that rom/custom kernel is for bb67. I got it to work on bb58 so it might work for you. Give it a try but make sure you make a backup before you begin.
How can I change baseband (new from old) in my kitchen?
Sorry I didn't understand well your post
Baseband must be flashed from LGMDP,can't be flashed from a zip file.
Sent from my LG-P500 using XDA Premium App
maybe you can help me since i flashed the "official GB Rom my data wont work no matter what ROM i use ,, from what i understand it is because of the baseband how do i fix it???? using LGMDP i used that to install it ?? also i have the original back up of the NV file???
How I can change baseband in a 2.2.2 rom?
0x0v3rfl0w said:
How I can change baseband in a 2.2.2 rom?
Click to expand...
Click to collapse
Kindly read the sticky thread which links to a howto. (You cannot flash baseband via ZIP from recovery, so stop asking over and over again.)
You flash official rom and cook. So theres a new baseband.
Vice versa
Sent from my LG-P500
What's the purpose of this baseband ordeal ? Ive heard alot about it and Im not to sure if it's something I need or even want