Hello guys, i want to use Trip's TripNMIUI GB 0.0.2 and it only support BB49. So i flashed my baseband from 58 to 49, and patched required patches. But the bb is unknown anyway. I tried the method that remove sd card and do factory reset, but it doesn't work. Could someone tell me how to fix it?
BTW, I tried Trip's TripNMIUI1.0.4 and it could show my bb "2.0.49". So is it the problem of Android version? Or the Patch?
dev tools>bad behavior>crash sys
Thats the general behavoiur buddy if your ROM isfor different Baseband it will show unknown baseband and when you install proper rom correct baseband will be displayed
i tried but not work. the phone can't even recognize my bb
anantshri said:
Thats the general behavoiur buddy if your ROM isfor different Baseband it will show unknown baseband and when you install proper rom correct baseband will be displayed
Click to expand...
Click to collapse
the rom is entirely for baseband 49, and that's why i flash my bb to 49. But it just can't recognize it ......ohmygodddddddddddddd...
try bb52. post the steps so tt we can try to help u..
icbless said:
try bb52. post the steps so tt we can try to help u..
Click to expand...
Click to collapse
well, thanks you guys~ i'v got signal. Actually, emmm, when i put it there and searched for solutions, in about 15 mins, it rebooted itself for several times, after that everything's ok.
Related
I've made bundles for FlashTool, for X8i and X8a, with basebands 006 and 015.
Kernel and baseband are related to each other, so if you have baseband 006, you'll have 2.0.2.A.0.24 kernel, and with baseband 015 you'll get 2.1.1.A.0.6 kernel.
If you try to flash latest kernel to phone with baseband 006, you'll get infinite boot loops. This can be fixed by simply flashing correct bundle (kernel/baseband).
This will NOT wipe userdata!
All basebands are in Xperia X8 folder on Mediafire.
Currently, these basebands are available:
X8i - E15i
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
X8a - E15a
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
Every baseband version is: M76XX-TSNCJOLYM-534040xy where xy is either 06 or 15, depending on which baseband you flash.
Update: jerpelea's CM7, racht's ports, as-mario's MIUI and ponanovn's MiniCM port are all made for latest kernel and baseband 015. Nice to see that, thanks
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Possibly a method for restoring signal issue when SEUS fails
Reserved for future use.
E15a:
http://www.megaupload.com/?d=U4FWILXI
thanks!
blagus said:
I've took both 006 and 015 basebands and made bundles for FlashTool.
Both have 2.1.1.A.0.6 FW's kernel, while amss and fota files differ.
This will NOT wipe userdata!
It's for X8i version ONLY! If anyone has got 2.x flash files for X8a, give them to me and I'll make baseband bundle
X8i
Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z
Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z
Don't forget to update 7-Zip to latest version if you have problems with opening archive.
(Note: 7-Zip gives me best compression ratio - about 38% for these files - which is required due to my slow upload)
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Click to expand...
Click to collapse
what is the advantage of this?? not meaning to be rude
The advantage is that you can change baseband as it please you. Why you'd want to I have no clue
Context: http://source.android.com/porting/telephony.html
All four basebands are now tested, packed and uploaded to Mediafire
good job !
hi i did yesterday flash the bundle for x8i
Baseband 015 - kernel 2.1.1.A.0.6
but the setting says that i have kernel
kernel 2.0.2.A.0.24
and baseband 015
but i dont have any looping like you said. did i do something wrong!
how i know that my phone is i or a! i have a E15i!!!!
now i installed the mini cm and its working? why, my kernel was not on the newest version.
maijinace said:
hi i did yesterday flash the bundle for x8i
Baseband 015 - kernel 2.1.1.A.0.6
but the setting says that i have kernel
kernel 2.0.2.A.0.24
and baseband 015
but i dont have any looping like you said. did i do something wrong!
how i know that my phone is i or a! i have a E15i!!!!
now i installed the mini cm and its working? why, my kernel was not on the newest version.
Click to expand...
Click to collapse
He said "If you try to flash latest kernel to phone with baseband 006"
not to flash latest baseband to phone with old kernel. this is your status, you flash the latest baseband to old kernel.
what blagus said about infinite bootloops is when you flash the latest kernel (2.1.1) to phone with baseband 006, your case is the opposite. understand?
I try to flash the whenever i flash it says driver error to reinstall driver in flashtool folder, PC Companion run ok and install gordon gate also show i got latest driver,
but still got driver need to reinstall, what is the problem expert
Does PC Companion get your device into flash mode? If so, then redownload flashtool. If not - get your X8 connected and go into hardware manager of your computer, find your connected phone and erase all the drivers, then reinstall PC Companion for new drivers.
done that, uninstall everything and driver,
start all over again but result still the same,
keep asking to install and reinstall driver from driver folder
Need explenation
deleted ....
are X8i and X8 e15i the same?
Traubisoda said:
are X8i and X8 e15i the same?
Click to expand...
Click to collapse
x8 surely is e15i
Traubisoda said:
are X8i and X8 e15i the same?
Click to expand...
Click to collapse
Yes. Difference is in the last letter: E15i and E15a, X8i X8a
Originally Posted by blagus
I've took both 006 and 015 basebands and made bundles for FlashTool.
Both have 2.1.1.A.0.6 FW's kernel, while amss and fota files differ.
This will NOT wipe userdata!
It's for X8i version ONLY! If anyone has got 2.x flash files for X8a, give them to me and I'll make baseband bundle
X8i
Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z
Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z
Don't forget to update 7-Zip to latest version if you have problems with opening archive.
(Note: 7-Zip gives me best compression ratio - about 38% for these files - which is required due to my slow upload)
Enjoy, and be careful, don't brick the phone, and if you do, don't blame me, you're doing this on your own risk!
Click to expand...
Click to collapse
My X8 firmware is 2.1 update 1 with baseband 06 build version 2.0.2.a.0.24
I have an infinte loop when using this file "Baseband 006 - X8i_2.1.1.A.0.6_Baseband_006.7z"
EDITED:
when i use "Baseband 015 - X8i_2.1.1.A.0.6_Baseband_015.7z", i have my baseband in 015, but the build number become 2.0.1.a.0.47.
if i want to upgrade to 2.1.1.a.0.6, what baseband should i use?
Hello guys, just one quick question, why is it that upgrading to baseband 15 from 06 the phone requests the sim network unlock code?
I am using the same SIM card, and the sim card belongs to the phone operator, so i don't understand why is it asking for network unlock code if it is the same sim.
I have found a couple of threads here on xda that recommend to click on the Dismiss button, but if i do that, i don't get any signal.
I have donwgraded again to 06, when i did the upgrade to 15 i also installed floyo 1.0 via xrecovery and everything loaded perfectly except that i have no signal, so it is useless.
I have tried going manually to the settings of mobile networks, but it says that it is not able to register on the network.
Thank you for any tips,
Regards
rdoggsv said:
Hello guys, just one quick question, why is it that upgrading to baseband 15 from 06 the phone requests the sim network unlock code?
I am using the same SIM card, and the sim card belongs to the phone operator, so i don't understand why is it asking for network unlock code if it is the same sim.
I have found a couple of threads here on xda that recommend to click on the Dismiss button, but if i do that, i don't get any signal.
I have donwgraded again to 06, when i did the upgrade to 15 i also installed floyo 1.0 via xrecovery and everything loaded perfectly except that i have no signal, so it is useless.
I have tried going manually to the settings of mobile networks, but it says that it is not able to register on the network.
Thank you for any tips,
Regards
Click to expand...
Click to collapse
Did you tried flashing your phone by SEUS to upgrade this directly from SE???
Thanks for replying biscoitu, the phone came with 1.6, so i changed the SI because mine was not ready for 2.1. The new software that was updated via PC Companion is:
2.0.1.A.0.47 with baseband 06, 2.1-update1
And it is working fine, but now the pc companion says that its up to date, and it is not updating to the latest baseband, so i downloaded the ones included in this thread and flashed with flashtool, when i reboot i get asked for the network unlock code, if i dismiss it does not work.
I don't understand why it asks for it, if it is the same sim card. I have visited a couple of websites that sell codes for the x8 but when i confirm with my IMEI they say that they don't have available.
i rooted my phone before but then i reset it and now using stock firmware
model x10a
firmware 2.1-update1
baseband version 2.1.54
build number 2.1.A.0.435
and i have no idea why it keep on reboot while using recording video?? also when doing so many stuff at once >"<
anyone have any idea how to fix this please ?
thanks
Try flashing 2.1 over again with flashtool.
That will delete all data and rooting status.
Keep posting if you need help.
Have you used flashtool before?
yes... i tried every single things with my phone (2.2-2.3)
i used to flash a lot but then i decided with the original firmware is the best
but i also having problems with other version..
goku16 said:
yes... i tried every single things with my phone (2.2-2.3)
i used to flash a lot but then i decided with the original firmware is the best
but i also having problems with other version..
Click to expand...
Click to collapse
My guess to your problem is that you had the wrong baseband for the 2.2/2.3 ROM you were running. Rooting shouldn't cause a reboot in your phone.
but this is from stock version.... how could it be wrong @@
Do I have the old or new baseband? screen shop provided. Why is it when I Flash n16 or17 and gapps .I get no signal,therefore not able to make a phone call. I wiped real good"like everything" flash multiple times am I missing something or is this an old baseband issue, if I have to what is the easiest way to flash to new baseband . not a total noob & have friends who can talk me through how to do things
Sent from my LG-P500 using xda premium
you have the new baseband
its old baseband... u should flash the new baseband ...
edit : i think its new baseband, i have new baseband and for me its showing same thing written on ics by lupohirp
Old baseband
Sent from my LG-P500 using Tapatalk
toshimac, sometimes your phone shows you have the old baseband, even with the new. I have the new baseband, and both CM9 and PerfectPeso as done by lupus, and both show the old baseband properties.
Try to see it in LGMDP. The upside is that you can flash the baseband with the same program .
More info: http://forum.xda-developers.com/showthread.php?t=1149530
Is this realty the easiest way to get new baseband I'm running cm 7.2
Sent from my LG-P500
Dan_Jacques said:
toshimac, sometimes your phone shows you have the old baseband, even with the new. I have the new baseband, and both CM9 and PerfectPeso as done by lupus, and both show the old baseband properties.
Try to see it in LGMDP. The upside is that you can flash the baseband with the same program .
More info: http://forum.xda-developers.com/showthread.php?t=1149530
Click to expand...
Click to collapse
do not have lgmdp on computer and google is mest on computer as well, have to do everything strait from phone "unless u send me direct downlode for lgmdp"
toshimac said:
do not have lgmdp on computer and google is mest on computer as well, have to do everything strait from phone "unless u send me direct downlode for lgmdp"
Click to expand...
Click to collapse
You will find instructions and the required files here:
http://forum.xda-developers.com/showthread.php?t=1149530
sweetnsour said:
You will find instructions and the required files here:
http://forum.xda-developers.com/showthread.php?t=1149530
Click to expand...
Click to collapse
K well will have go over it a couple times make sure I get it right
Sent from my LG-P500
Hello everyone, Im noob at this obviously and i really need some tech support ... i did read some info, I got my att s2 a week ago, i tried to installed the nightly ICS rom and i could connect to wifi or internet at all, tried with CM7, same problem. I gave up and just restore my backup. After that, everything normal but now I cant make any calls, or listen to the dial, anything. I think it is because of the baseband version... Ill put here my info: Its been rooted
Android version: 2.3.4
baseband: I9100XXLPH
kernel version: 2.6.35.7_ZedomaxStockKernel
Gingerbread.UCKH7
I figured out that I cant have that baseband for my i777, but I dont know how to get things back, Im desperated. please help!!!!! . Should I install the firmware from sammobile? I downloaded my firmware, tried to installed thru CWM but it said aborted, dunno what to do!!
Bruno2352 said:
Hello everyone, Im noob at this obviously and i really need some tech support ... i did read some info, I got my att s2 a week ago, i tried to installed the nightly ICS rom and i could connect to wifi or internet at all, tried with CM7, same problem. I gave up and just restore my backup. After that, everything normal but now I cant make any calls, or listen to the dial, anything. I think it is because of the baseband version... Ill put here my info: Its been rooted
Android version: 2.3.4
baseband: I9100XXLPH
kernel version: 2.6.35.7_ZedomaxStockKernel
Gingerbread.UCKH7
I figured out that I cant have that baseband for my i777, but I dont know how to get things back, Im desperated. please help!!!!! . Should I install the firmware from sammobile? I downloaded my firmware, tried to installed thru CWM but it said aborted, dunno what to do!!
Click to expand...
Click to collapse
If your rooted then I am assuming you know how to work Odin and I would just do a search on here or google for the right modem and flash with Odin.
jasond816 said:
If your rooted then I am assuming you know how to work Odin and I would just do a search on here or google for the right modem and flash with Odin.
Click to expand...
Click to collapse
Yes , I used once Odin, please I just want my phone to be back to calls and stuff
Go here. Then find the proper modem for the version of android you are on and you can use Odin to flash. Good luck and please use the search function.
Bruno2352 said:
Hello everyone, Im noob at this obviously and i really need some tech support ... i did read some info, I got my att s2 a week ago, i tried to installed the nightly ICS rom and i could connect to wifi or internet at all, tried with CM7, same problem. I gave up and just restore my backup. After that, everything normal but now I cant make any calls, or listen to the dial, anything. I think it is because of the baseband version... Ill put here my info: Its been rooted
Android version: 2.3.4
baseband: I9100XXLPH
kernel version: 2.6.35.7_ZedomaxStockKernel
Gingerbread.UCKH7
I figured out that I cant have that baseband for my i777, but I dont know how to get things back, Im desperated. please help!!!!! . Should I install the firmware from sammobile? I downloaded my firmware, tried to installed thru CWM but it said aborted, dunno what to do!!
Click to expand...
Click to collapse
Go to this thread:
http://forum.xda-developers.com/showthread.php?t=1361393
Flash one of the modems listed under "Modems For Samsung Based ROMs" in ClockWorkMod Recovery.
jasond816 said:
Go here. Then find the proper modem for the version of android you are on and you can use Odin to flash. Good luck and please use the search function.
Click to expand...
Click to collapse
ohhh so If i have gingerbread uckh7, i have to get this modem: i777 UCKH7 Modem_CWM? DOesnt matter if I have the I9100XXLPH baseband??
Bruno2352 said:
ohhh so If i have gingerbread uckh7, i have to get this modem: i777 UCKH7 Modem_CWM? DOesnt matter if I have the I9100XXLPH baseband??
Click to expand...
Click to collapse
I. Believe when you flash the modem it will change the baseband.
Bruno2352 said:
ohhh so If i have gingerbread uckh7, i have to get this modem: i777 UCKH7 Modem_CWM? DOesnt matter if I have the I9100XXLPH baseband??
Click to expand...
Click to collapse
The baseband is the modem. You are on gingerbread, so flash any of the gingerbread modems in the area I mentioned.
F1reEng1neRed said:
Go to this thread:
http://http://forum.xda-developers.com/showthread.php?t=1361393
Flash one of the modems listed under "Modems For Samsung Based ROMs" in ClockWorkMod Recovery.
Click to expand...
Click to collapse
Fix your link bro.
thank you guys very much!!!! i really appreciate it, i was desperated, i can make calls again!!! thanks and sorry for being such a noob , ill be better eventually hehe
jasond816 said:
Fix your link bro.
Click to expand...
Click to collapse
Doh! Thx
Holy crap! What is so terrible with the stock ROM that you couldn't even go a week with it before having to flash something? What the hell is wrong with people?
Lol. Glad to hear you phone is up and running properly again.
Hi everyone
Today I updated my phone I9100-G to ICS using sammobile Firmwares...
The way I did it:
I was on cMIUI...I flashed old 2.3.6 official firmware (used 3 PIT,PDF and Bootloader files)
then I flashed Official 4.0.4 Using PDF file....
now my baseband version:Unknown and I can't register my device to samsung....
Have I done anything wrong?or what?
Thanks In Advance BTW
Guys Come on...
I need ur help in this one
1) No bumping threads after 90 minutes. This isn't your personal tech support forum.
2) Have you tried reflashing your modem ? When I used Miui GB the baseband used to disappear occasionally. Normally a reboot fixed it (made the baseband reappear), once I had to reflash the modem to fix it.
Also, check your IMEI. If you have the generic one (0044...), then there's your problem. Restore your EFS backup if that's the case.
MistahBungle said:
1) No bumping threads after 90 minutes. This isn't your personal tech support forum.
2) Have you tried reflashing your modem ? When I used Miui GB the baseband used to disappear occasionally. Normally a reboot fixed it (made the baseband reappear), once I had to reflash the modem to fix it.
Also, check your IMEI. If you have the generic one (0044...), then there's your problem. Restore your EFS backup if that's the case.
Click to expand...
Click to collapse
1- Sorry for bumping...I'm totally aware of rules but I have a little problem with time (I'll explain later )
2-No I have not reflashed Modem... and i was using JB MIUI .... look i tried flashing official ICS of FRANCE and there is no problem with it... Is it possible that problem is with ROM itself?.... u know it's official!
and yes my IMEI is Geniune and I have network service
Bump!!!
Sent from my GT-N8000 using XDA Premium HD app