Related
There is a font on another rom that I like, how would I get that installed onto my Eris? I have the file from the other rom.
Have a look at T2noob's batch file font installer for ideas (and fonts, too).
Looks like he takes a pair of True Type (.ttf) files - one regular face, one bold face - and copies them to
/system/fonts/
renaming the (respective) .ttf files to "DroidSans.ttf" and "DroidSans-Bold.ttf"
Then, just reboot.
That was done for rooted 2.1 ROMs; I'm not sure if it the same for AOSP or CM6 Froyo ROMs
good luck
bftb0
bftb0 said:
Have a look at T2noob's batch file font installer for ideas (and fonts, too).
Looks like he takes a pair of True Type (.ttf) files - one regular face, one bold face - and copies them to
/system/fonts/
renaming the (respective) .ttf files to "DroidSans.ttf" and "DroidSans-Bold.ttf"
Then, just reboot.
That was done for rooted 2.1 ROMs; I'm not sure if it the same for AOSP or CM6 Froyo ROMs
good luck
bftb0
Click to expand...
Click to collapse
Thank you so much, this helps. I posted a question to his thread on the other site, but is it possible, since the fonts are in "true type" format that I can use some of mine?
johnny quest said:
Thank you so much, this helps. I posted a question to his thread on the other site, but is it possible, since the fonts are in "true type" format that I can use some of mine?
Click to expand...
Click to collapse
The best way to find out is to try.
Just make a Nandroid backup before you start, and then there is zero risk involved in trying.
bftb0
bftb0 said:
The best way to find out is to try.
Just make a Nandroid backup before you start, and then there is zero risk involved in trying.
bftb0
Click to expand...
Click to collapse
Ok, thanks I will give it a try.
johnny quest said:
Ok, thanks I will give it a try.
Click to expand...
Click to collapse
I used the T2Noobat but it says Device not found but when I go to the folder where my font is, its not there. So I don't know if I have to reboot my phone in order for my font to take effect. Or, the way you said about system/fonts..... I don't know where in my sd would I find the fonts in order to change it.
johnny quest said:
I used the T2Noobat but it says Device not found but when I go to the folder where my font is, its not there. So I don't know if I have to reboot my phone in order for my font to take effect. Or, the way you said about system/fonts..... I don't know where in my sd would I find the fonts in order to change it.
Click to expand...
Click to collapse
If you get errors, it is not reasonable to conclude that the install worked despite the errors. That's what error messages are for - to tell you that something went wrong.
T2noobs .bat file (script) presumes that you have:
1) ADB working on your PC (generally by installing the Android SDK or HTC Sync + adb)
2) That your phone is connected via USB cable
3) That your phone has USB Debugging turned on
4) That your phone is running a rooted ROM.
You don't have to use his script. I mentioned it as an example. You can just use a root-aware file manager (RootExplorer or Estrongs File Manager), and re-mount /system in RW mode, and then drop your two True Type fonts into
/system/fonts/
with the file names "DroidSans.ttf" and "DroidSans-Bold.ttf"
and then reboot. Obviously, there will already be files in there with those names to begin with, so you need to either (a) rename them to something else, (b) move them to some other folder, or (c) delete them.
I don't know how to make this any clearer.
You probably should spend some time learning how to perform Nandroid backups and restores before you do any of this (if you have not already mastered those skills). Having good backups will save your butt.
bftb0
PS. I just did this on my (CELB 3.2) ROM, so I know it works - assuming you are not using some screwy fonts.
bftb0 said:
If you get errors, it is not reasonable to conclude that the install worked despite the errors. That's what error messages are for - to tell you that something went wrong.
T2noobs .bat file (script) presumes that you have:
1) ADB working on your PC (generally by installing the Android SDK or HTC Sync + adb)
2) That your phone is connected via USB cable
3) That your phone has USB Debugging turned on
4) That your phone is running a rooted ROM.
You don't have to use his script. I mentioned it as an example. You can just use a root-aware file manager (RootExplorer or Estrongs File Manager), and re-mount /system in RW mode, and then drop your two True Type fonts into
/system/fonts/
with the file names "DroidSans.ttf" and "DroidSans-Bold.ttf"
and then reboot. Obviously, there will already be files in there with those names to begin with, so you need to either (a) rename them to something else, (b) move them to some other folder, or (c) delete them.
I don't know how to make this any clearer.
You probably should spend some time learning how to perform Nandroid backups and restores before you do any of this (if you have not already mastered those skills). Having good backups will save your butt.
bftb0
PS. I just did this on my (CELB 3.2) ROM, so I know it works - assuming you are not using some screwy fonts.
Click to expand...
Click to collapse
Thank you so much, I've been living on backups and restores. believe me I've learned my lesson. I will give this a try.
Your method worked great with the Root Manager. I bought it on the market. Ok, my biggest problem now is that my font is microscopic small. I don't know why. But I can't see the letters of which folder I'm in to take that font out.
I need a favor: can you post up screenshots or the number of folders to scroll down to get to the system/fonts/droidsans.tff
I can't see it, really its that small its the universal acc font.
Never mind I got it. Took a lot of squinting but I got it. Thanks.
Hey all, Well i know we could not wait for a Honeycomb theme, i know i cannot, but heres my conundrum.
I have made a honeycomb keyboard, but cannot get it to install for the life of me, ive used the testkeys, shared, platform, etc (all using Signapktic from Stericson. Does anyone have any clue as to why it will not install?
A few questions that i know you might ask, answered ...
No, there is no other keyboard, other than swype, and samsung keypad..
I made it off of the GB keyboard...
Yes, I have made many of themes, many of changes to Frameworks, and have had sucess installing, and running my custom roms....
My question basically is this, IF POSSIBLE, CAN ANYONE SIGN THE FILES I HAVE TO MAKE THIS WORK? PM ME AND I SHALL SEND THE FILES. CREDIT WILL BE GIVIN, I AM ON THE OTHER HAND GOING TO NEED SOME SORT OF PROOF YOU KNOW WHAT YOUR DOING, I WORKED REAL HARD ON THIS, SO FOR RIGHT NOW ITS PRIVATE, HENSE THE PM.
THANKS AGAIN IN ADVANCE. REMEMBER .. LETS GET THIS HONEYTCOMB GOING
I know that most of the keyboards dont work simply by installing but rather need to be pushed to the data\app or data\app_s folder depending on which rom you are running. You can accomplish this using adb or using a file explorer like RootExplorer.
Thanks
Thank you man, this helps a whole lot. Now do i need to re-sign each apk inside the rom folder? or can i just re-sign the .zip?
georgegreco86 said:
Thank you man, this helps a whole lot. Now do i need to re-sign each apk inside the rom folder? or can i just re-sign the .zip?
Click to expand...
Click to collapse
I'm not sure what .zip you're refering to other than a CWM recovery flashable .zip for you keyboard. If this is what you mean, then use the same signiture (key) you'd find in any of the flashable .zips on the forums. In other words, just copy over the META-INF folder from some other .zip to yours. Of course, you'll want to make sure the update-script in this folder is pointing at the proper directories for installation.
For your apk, you should only need to sign it if you changed the AndroidManifest.xml. Otherwise, just keep the META-INF folder from them original apk.
I know that I ask a lot of questions, some of them just a bit bonehead. I really appreciate everyones help here.
So, I finally for 1.4.3 running, rooted it, restored my backup from titanium backup. I have noticed, however, that when Installed my custom resources like SystemUI.apk and framework_res.apk there are a few little bugs here and there in the text it displays...
For instance, when you hit the menu button and it displays the block of buttons for some apps (like ADW / ADW EX and Titanium Backup) the arrow that used to say "More" now says "Allows the Application to set an alarm in an" and then it trails off. Obviously this is a mistake, probably they changed some reference between files in the framework folder. Additionally, the "Set as Default" now displays a bunch of %'s and letters as if, again, some reference is bad.
I like running the current software, these are minor issues. I'm sure they can be fixed, just not sure how. I was kind of stupid and didn't make a backup of my original framework_res.apk and SystemUI.apk files from the Nook after I updated but before I replaced them. Stupid of me, I know. I assumed from the file dates that nothing was changed. So, I can't really go back to the originals until I get it sorted out.
Anyone have any suggestions? If perhaps someone who has updated to 1.4.3 could send me those two files so I could make the mods myself on the new APK files? I'm almost positive it is framework_res.apk that is the culprit.
Does anyone have framework_res.apk from v1.4.3?
titanshadow said:
Does anyone have framework_res.apk from v1.4.3?
Click to expand...
Click to collapse
You can just get the full 1.4.3 update zip from B&N yourself, unpack the zip, and it's all there: http://su.barnesandnoble.com/nook/nooktablet/1.4.3/nZU6wA3e3CCckqXRQI6gqoT0ZKAA8MujlFdXFU08/nooktablet_1_4_3_update.zip
(I found that by looking here first: http://www.barnesandnoble.com/u/Software-Updates-NOOK-Tablet/379003187/)
lack_android said:
You can just get the full 1.4.3 update zip from B&N yourself, unpack the zip, and it's all there: http://su.barnesandnoble.com/nook/n...0ZKAA8MujlFdXFU08/nooktablet_1_4_3_update.zip
(I found that by looking here first: http://www.barnesandnoble.com/u/Software-Updates-NOOK-Tablet/379003187/)
Click to expand...
Click to collapse
To my knowledge you can't just unpack them anymore, I tried and I just got a large archive file that I didn't have anything to decompress. Do you know what program to use to unpack the archive inside the zip?
titanshadow said:
To my knowledge you can't just unpack them anymore, I tried and I just got a large archive file that I didn't have anything to decompress. Do you know what program to use to unpack the archive inside the zip?
Click to expand...
Click to collapse
I believe it is '7zip' to the rescue.
Finally got it... Now trying to figure out how to modify it, the contents are a lot different...
I keep flashing the roms a lot and have to install a couple of apps again and again,
which has been very annoying.
Is there a method to make a CWM flashable zip such as "gapps package"
Lets say these are the apps i want to turn into a single flashable zip
whatsapp,
Google Translate,
AirDroid,
Scan
I looked at threads but they were mostly for other phones, cant find anything specific for SGS 3 I9300
http://forum.xda-developers.com/showthread.php?t=1721680
Can I use the above method and where should i place the apks in the system folder?
Hi mate,
Just give the apks ,I will make a flashable package for you.
Have a look at how others have made them, it's not that hard to work out.
But who has made it? How was it made?
could you point me to so called "others"
@mk256
I appreciate your help, but
would you let me know how its done because i have a long list of apps?
kuntu said:
But who has made it? How was it made?
could you point me to so called "others"
@mk256
I appreciate your help, but
would you let me know how its done because i have a long list of apps?
Click to expand...
Click to collapse
Virtually any flashable zip will do, all you need to do is edit the updater-script and put all the apps in the right place. Then sign the zip and flash it.
I think you are looking for something like this:
[TUTORIAL] Create your own UPDATE.ZIP
Ok, this may be answered elsewhere, I don't know. "Search is temporarily unavailable" I am trying to understand how I am supposed to work with the backup from CWM. I understand that I should have a System image that I can work in, but what I have is 3 files in its place. System.ext4.tar, System.ext4.tar.a, and System.ext4.tar.b. All three files are broken to some degree.
System.ext4.tar is a zero byte file.
System.ext4.tar.a appears to be a spanned tar file that 7ZIP/WinRAR simply think was cut-off (never asks for the second file, and complains of unexpected End of Archive)
System.ext.4.tar.b appears to be the second part of the archive, but nothing will open it.
So, how do I get to a point I have a complete archive that I can edit? Or do I need to use different software than CWM to back up the phone?
Thanks for the help guys.
waldojim said:
Ok, this may be answered elsewhere, I don't know. "Search is temporarily unavailable" I am trying to understand how I am supposed to work with the backup from CWM. I understand that I should have a System image that I can work in, but what I have is 3 files in its place. System.ext4.tar, System.ext4.tar.a, and System.ext4.tar.b. All three files are broken to some degree.
System.ext4.tar is a zero byte file.
System.ext4.tar.a appears to be a spanned tar file that 7ZIP/WinRAR simply think was cut-off (never asks for the second file, and complains of unexpected End of Archive)
System.ext.4.tar.b appears to be the second part of the archive, but nothing will open it.
So, how do I get to a point I have a complete archive that I can edit? Or do I need to use different software than CWM to back up the phone?
Thanks for the help guys.
Click to expand...
Click to collapse
Well, I found a solution for now. Fire up Linux, use cat to combine all three files, then use tar to extract the contents. Not sure why this needed split in the first place, but at least the files can be extracted.
I have managed to remove the APKs I do not want, and made a new system.ext4.tar file (all in Linux), but need to know what else I have to do to make the system image usable.
I found several guides on making a ZIP file, but I didn't want to necessarily go through all that. I backed up everything, so what I would like to know, is what all needs to change so that I can use the separate files as they are, and simply do a CWM "restore" function?
I know I sound like a complete noob at this point, and will deal with the related comments. However, please understand, I don't want the heavily modified rom packs. I simply wanted a rom VOID of all the Verizon bloatware, and have the Verizon tethering restraints removed. I have them all disabled now, and 3rd party tethering is working quite well. So I would rather not have that garbage wasting space. Right now, it looks like I may save 250MB or so.
Any help would be appreciated. Thanks.
waldojim said:
I have managed to remove the APKs I do not want, and made a new system.ext4.tar file (all in Linux), but need to know what else I have to do to make the system image usable.
I found several guides on making a ZIP file, but I didn't want to necessarily go through all that. I backed up everything, so what I would like to know, is what all needs to change so that I can use the separate files as they are, and simply do a CWM "restore" function?
I know I sound like a complete noob at this point, and will deal with the related comments. However, please understand, I don't want the heavily modified rom packs. I simply wanted a rom VOID of all the Verizon bloatware, and have the Verizon tethering restraints removed. I have them all disabled now, and 3rd party tethering is working quite well. So I would rather not have that garbage wasting space. Right now, it looks like I may save 250MB or so.
Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
Backups really aren't meant to be unzipped and played with. Usually bloat removal is done while booted into the system or you can unpackage a Rom and remove the bloat there and then repackage it and flash it then make your backup that doesn't contain any bloat. Using the xda kitchen tools from dsxda I believe is the name
Sent from my HTC6435LVW using XDA Premium HD app
.torrented said:
Backups really aren't meant to be unzipped and played with. Usually bloat removal is done while booted into the system or you can unpackage a Rom and remove the bloat there and then repackage it and flash it then make your backup that doesn't contain any bloat. Using the xda kitchen tools from dsxda I believe is the name
Sent from my HTC6435LVW using XDA Premium HD app
Click to expand...
Click to collapse
I think this is where some of my confusion comes from - it was never zipped. There was a group of tarred files, an MD5sum and a few other items. But nothing there was zipped.
waldojim said:
I think this is where some of my confusion comes from - it was never zipped. There was a group of tarred files, an MD5sum and a few other items. But nothing there was zipped.
Click to expand...
Click to collapse
I guess what I meant to say by "zipped" was just in general they are compressed by the recovery in a way that it knows how to go and use them to restore data to the device.