Related
THIS IS STRICTLY A GUIDE TO PRE-PARE YOU ON HOW TO SET-UP ANDROID SDK AND ADB DEVICES(DRIVERS), IF YOU ALREADY HAVE THAT SET-UP YOU CAN SKIP TO EUGENE'S POST ON HOW TO ROOT MYTOUCH SLIDE.
Last Updated:6/29/2010 at 11:36PM
Any other issues to deal with the actual process to root your mytouch slide should be directed toward his thread. Thank you for reading.
Okay so after about 4 hours of reading and asking questions I finally got my device rooted. My biggest problem doing this was that the guide in this forum was basically showing you how to root the phone if you had previous experience with androids and android SDK which I did not.
Note: If you have SDK installed already on your pc please delete your SDK folder and start from scratch for best results with my guide.
1. download Android SDK.(You will not have to use Android SDK physically but you will need it installed on your pc to root your phone) Save it to your PC where you can find it.
2.Extact the .zip file, do not rename just yet for the sake of my guide you also may delete the .zip file of it to keep clean.
3a. Move android-sdk-windows* out of the android-sdk_r06-windows folder onto the root of your C:/ drive.
*=the name of the folder may be different if you use a different operating system but since I do not own the other systems I cannot really tell you what the folders name.
3b.Now that you have the folder in the correct place you can rename the folder from "SDK-Anroid-Windows" to something easier such as "SDK" "Android" or something else which you will remember has to do with SDK.
This next part is not required, if you do not feel comfortable doing this, then don't, there is other ways around this.
3c.You also have the option to change your the path of your directory on your system. To do this, follow the instrustion here on step 2.( I would like to thank fermunky for his input)
My directory was pointed to the C:/Program files so I switched it to C:/android/tools , for those who do not know what this does it simply makes it so you do not have to change directory in step 7 (CD), you will only have to open your command prompt and then your ready to enter "ADB devices" .
4.Install the correct ADB drivers from pdanet . Select the proper download based on your OS if you do not know what bit you are using click start, right click computer, click properties, the system type will show you the proper file to download. and save it to your computer where you can find it.
5.Start the installation process for the ABD drivers, Follow the on-screen directions to install the drivers ( make sure your phone is not plugged into the pc at this time)
6.Check to see if you did this correctly, plug in your phone and open your comand prompt on your computer and type:
cd C:\android\tools**
**=your file directory might be different than this, it depends what you renamed your folder
then type:
adb devices ( this will now show all the devices connected to an adb devices)
Check to see if your device is listed and connected properly.***
***=If it is correctly connected you will see a device listed and under attached it should say device.
After you have this all set up you are ready to root your phone via the guide from Eugene.****Remember you need to add the contents from his root.zip file into the tools of your SDK folder in order to root your phone.
****=Eugene's guide has changed since I wrote this but you still are ready to follow his steps. I plan on rooting someones slide soon based off his steps and will edit here if I need to add anything)
Thanks for reading.
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
fermunky said:
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
Click to expand...
Click to collapse
the other guide mentions to create a new variable such as:
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools
Click to expand...
Click to collapse
so would i follow this? or list that directory under the already-enabled PATH variable?
Yeah just use the existing PATH variable, and only need the path, no need to include variable names.
I think this is a very valuable how-to for the noobs out there and im going to pass this up the chain to get sticky'd. I also posted this in the slide bible. Good job, OP
For the uninitiated, and yes it's common sense
When I was using Windows (as I'm using Ubuntu now), and reading all the adb guides, for ease of use and to prevent people from getting confused, they name the sdk as "android-sdk-windows", which is fine for a newcomer (it's the same for Ubuntu except the "windows" part and the slash direction \ vs. /). However, you can name it whatever you want. You just need to make sure to have the same name in your path. For example, I'm lazy and my typing skills aren't that great. I don't want to type 19 characters (yes, I counted). So I just named it simply "android". 7 characters from 19. Its way more efficient for me. I've contemplated naming it "andy" or something to shorten it further. But, again, you don't even need to name it anything android related. You can choose to name it r2d2 (see what I did there?) if you want! Just my 2 cents. Thanks!
Yeah I could of renamed it something different but I didn't think about that til after it was written, I will fix it as soon as I am on an actual pc. I will also include how to do it via mac and ubuanta(sorry if I miss spelled)
kingofyo1 said:
I think this is a very valuable how-to for the noobs out there and im going to pass this up the chain to get sticky'd. I also posted this in the slide bible. Good job, OP
Click to expand...
Click to collapse
Thanks kingofyo. Glad I could give back to this forum after all it has done for me. And if I find any other helpful tips to help make rooting easier I'll be sure to include it.
Sent from my T-Mobile myTouch 3G Slide using XDA App
fermunky said:
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
Click to expand...
Click to collapse
I will leave that as an option for others to pick if they want to do that, as some might not want to change their directory to follow that path.
oo, this cleared up a few things for me! thanks!
eff0rtless said:
oo, this cleared up a few things for me! thanks!
Click to expand...
Click to collapse
ah what pat of seattle do you live in? I live up in mukilteo.
rlacsamana1989 said:
7.Check to see if you did this correctly, plug in your phone and open your comand prompt on your computer and type:
cd C:\android\tools (your file directory might be different than this, it depends what you renamed your folder)
then type:
adb devices ( this will now show all the devices connected to an adb devices)
Check to see if your device is listed and connected properly.
Click to expand...
Click to collapse
when typing in 'adb devices', i get this message:
Code:
adb server is out of date. killing...
* daemon started successfully *
however, it does continue to list my device as attached.
the full message is:
Code:
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
HTxxxxxxxx device
*the x's do represent a valid serial number
-------------------------------------------------------
is this a problem? and will i run into any problems trying to successfully root?
note: i have done a search on this and the results returned as the program DroidExplorer being the culprit, however, i do not have that program installed.
Do you have the most updated Android SDK? And try searching that topic on google and see if you can find people with the same issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
rlacsamana1989 said:
Do you have the most updated Android SDK? And try searching that topic on google and see if you can find people with the same issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I believe so. I actually installed of the available packages as per the initial guides instructions. If I needed to uninstall & reinstall the sdk, how would I do that?
As yes I have done a thorough search. I mentioned the results in my original comment.
poetik517 said:
I believe so. I actually installed of the available packages as per the initial guides instructions. If I needed to uninstall & reinstall the sdk, how would I do that?
As yes I have done a thorough search. I mentioned the results in my original comment.
Click to expand...
Click to collapse
You should be able to just delete the folder it downloaded. and make sure you empty your trash. I will look at what the issues can be. and let you know if I find anything. I'm pretty good at that
Edit: Have you seen this post? I'd start from the first thing they say which is going to task manager and ending adb.exe and if that doesn't work go to the next thing they stated to do. If none of those work come back and I will try and figure it out.
Ok so I just got my slide and want root. Im coming from a rooted g1 which has a completely different root process and so I have no experience with sdk and adb sadly. Im running windows 7 and I have followed this guide step-by-step but every time I get to the point where I type "loop" in eugenes guide it says it does not recognize the command... I saw somewhere sdk components are not supported by windows 7. Is this true? And is there a way around it? I also saw somewhere that it could be that I dont have my enviroment variables set correctly. Im not sure by what it means to add the full path to the tools\ directory to the Path variable value. When I double click Path default displays:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
Where do I add it?
My tools directory is set in the root of my C drive as
C:\SDK\tools (most people typed android, renamed mine to just SDK, seemed faster)
This is what im trying to figure out at this point. Sorry if it very noobish.. Any help would be greatly appreciated.
cdt82002 said:
Ok so I just got my slide and want root. Im coming from a rooted g1 which has a completely different root process and so I have no experience with sdk and adb sadly. Im running windows 7 and I have followed this guide step-by-step but every time I get to the point where I type "loop" in eugenes guide it says it does not recognize the command... I saw somewhere sdk components are not supported by windows 7. Is this true? And is there a way around it? I also saw somewhere that it could be that I dont have my enviroment variables set correctly. Im not sure by what it means to add the full path to the tools\ directory to the Path variable value. When I double click Path default displays:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
Where do I add it?
My tools directory is set in the root of my C drive as
C:\SDK\tools (most people typed android, renamed mine to just SDK, seemed faster)
This is what im trying to figure out at this point. Sorry if it very noobish.. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Okay my guide is to set you up to root, you need to download slideroot.zip from eugene's how to guide. It will download a folder so you need to save it somewhere you will find it. Once you have it saved extract the files and the files within that folder you need to put in the tools of the sdk directory. Do not just drop the folder as that would change the directory even more to another folder. A file in that folder is what actually makes the loop feature work and there are other things you will need from that folder to root.
And to this. %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
you just need to delete "Program Files (x86)\QuickTime\QTSystem\"
and then replace it with your directory to your C:/
rlacsamana1989 said:
You should be able to just delete the folder it downloaded. and make sure you empty your trash. I will look at what the issues can be. and let you know if I find anything. I'm pretty good at that
Edit: Have you seen this post? I'd start from the first thing they say which is going to task manager and ending adb.exe and if that doesn't work go to the next thing they stated to do. If none of those work come back and I will try and figure it out.
Click to expand...
Click to collapse
a successful uninstall & reinstall of the sdk worked for me. i no longer get the 'adb server is out of date' message when trying to list devices.
when reinstalling all of the packages in sdk, i did note this message:
Code:
'Downloading Usb Driver package, revision 3
Installing Usb Driver package, revision 3
Installed Usb Driver package, revision 3
Updated ADB to support the USB devices declared in the SDK add-ons.
'adb kill-server' succeeded.
ADB: * daemon not running. starting it now *
ADB: * daemon started successfully *
'adb start-server' succeeded.
but its a good thing =]
another note:
when i have sdk all setup, HTC Sync no longer seems to work or recognize my device as connected, even after ending adb.exe in my task manager.
poetik517 said:
another note:
when i have sdk all setup, HTC Sync no longer seems to work or recognize my device as connected, even after ending adb.exe in my task manager.
Click to expand...
Click to collapse
Have you tried re-installing the pdanet drivers again. And make sure you aren't clicking the box that pops up on the bottom of the screen. And if that doesn't work I know there is a program I have installed on my pc that let's me delete drivers I just can't remember the program so ill post it once I get home from work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
usbdeview
rlacsamana1989 said:
Have you tried re-installing the pdanet drivers again. And make sure you aren't clicking the box that pops up on the bottom of the screen. And if that doesn't work I know there is a program I have installed on my pc that let's me delete drivers I just can't remember the program so ill post it once I get home from work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I think the program you're trying to remember may be "usbdeview"? This program allows you to disconnect or uninstall drivers.
rooted via ubuntu and have recovery
i tried doing stuff in windows, but it wont install the drivers properly.
SO I NEED HELP!
what do i do to get this to work?
i want to be able to install 3rd party apps and get rid of att bloatware.
i have no idea where to start.
HELP!!!!!!!!!
thanx
ubuntu or windows...
download the Android SDK for Windows
http://developer.android.com/sdk/index.html
install and download ONLY THE USB DRIVERS
open cmd window, connect usb cable, navigate to the <folder>\tools where you installed, ie. c:\android\tools
paste the following into a small batch file, call it anything you want dot bat,
ie. c:\android\tools\yourname.bat
---cut here--
cd\android\tools
adb remount
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
pause 1
adb reboot
-- cut here--
ok i'll try right now
still must be missing something
what setting is my phone on when i plug it in? recovery? or just regular charge only or hard disk mode?
how do i get the usb drivers to work? when i try to install them is says "windows was unable to install your adb". is there something else i need on my pc?
when i run that .bat file it says a bunch of things, but basically says device not found.
please start from step #0.
there is no one place that has every single step we need to do.
it makes it next to impossible to get this to work.
dh4645 said:
how do i get the usb drivers to work? when i try to install them is says "windows was unable to install your adb". is there something else i need on my pc?
Click to expand...
Click to collapse
I'm not sure I've ever seen this error come up before by anyone. Saying this is impossible isn't really true since several people have gotten it working, and the information is on these forums. The best thing to do would be to go to the IRC channel and get stepped through it. http://webchat.freenode.net/?channels=#liberatedAria
I'm not quite sure what's up with your ADB install, but you should download HTC Sync from the HTC site, because it includes a driver install. http://www.htc.com/us/support/aria-att/downloads/. Then go through the process in the post above. Your phone should be in the "Charge Only" mode when connected to the computer.
ocswing said:
I'm not sure I've ever seen this error come up before by anyone. Saying this is impossible isn't really true since several people have gotten it working, and the information is on these forums. The best thing to do would be to go to the IRC channel and get stepped through it. http://webchat.freenode.net/?channels=#liberatedAria
I'm not quite sure what's up with your ADB install, but you should download HTC Sync from the HTC site, because it includes a driver install. http://www.htc.com/us/support/aria-att/downloads/. Then go through the process in the post above. Your phone should be in the "Charge Only" mode when connected to the computer.
Click to expand...
Click to collapse
i know it's not impossible, it's just that usually when the people explaining the steps to accomplish this leave out steps that they think is common knowledge/sense, but is not to total noobs.
it would be nice to have a definitive step-by-step guide:
step 1 - root your phone (this was actually really easy with the ubuntu cd)
step 2 - go back to windows and download/install these specific programs . . . (i did not know i needed htc sync, the steps i saw said just to use the sdk and the usb drivers in there to set up my phone)
step 3 - enable debugging on phone, plug your phone into pc and use charge only. (don't we use recovery for anything, i've seen steps about having this open and using the mount /system to do stuff)
step 4 - get the adb usb drivers to install properly (i guess this is my main issue at the moment...is that what is causing the device not found error when i run the .bat file?)
step 5 - copy and paste code into notepad an save as a .bat file.
step 6 - run the .bat file (within cmd? double click on the file? does it matter?)
step 7 - ????
alternate step 2 through whatever - use the ubuntu cd to do everything... (???)
dh4645 said:
i know it's not impossible, it's just that usually when the people explaining the steps to accomplish this leave out steps that they think is common knowledge/sense, but is not to total noobs.
it would be nice to have a definitive step-by-step guide:
step 1 - root your phone (this was actually really easy with the ubuntu cd)
step 2 - go back to windows and download/install these specific programs . . . (i did not know i needed htc sync, the steps i saw said just to use the sdk and the usb drivers in there to set up my phone)
step 3 - enable debugging on phone, plug your phone into pc and use charge only. (don't we use recovery for anything, i've seen steps about having this open and using the mount /system to do stuff)
step 4 - get the adb usb drivers to install properly (i guess this is my main issue at the moment...is that what is causing the device not found error when i run the .bat file?)
step 5 - copy and paste code into notepad an save as a .bat file.
step 6 - run the .bat file (within cmd? double click on the file? does it matter?)
step 7 - ????
alternate step 2 through whatever - use the ubuntu cd to do everything... (???)
Click to expand...
Click to collapse
Run the bat file in the cmd window. Once the bat has successfully run you can unplug the phone and you'll be good to go.
Shad0wguy said:
Run the bat file in the cmd window. Once the bat has successfully run you can unplug the phone and you'll be good to go.
Click to expand...
Click to collapse
so what is the point of the sdk...other than to have the tools folder to run that .bat? so i'm the only one that can't get the sdk usb drivers to work?
and by good to go, u mean i can install 3rd party apps?
how do i get rid of the the at&t bloatware?
There are other threads explaining how to install third party apps and remove ATT bloatware.
Sent from my HTC Liberty using XDA App
The problem with trying to do a step-by-step guide is that things like rooting, removing bloatware, and sideloading apps are all separate processes that require different steps and can be done in multiple ways. Some stuff requires you to be in recovery, some stuff doesn't, and other methods may require additional software. That's why there are specific separate threads that discuss them.
You've rooted your phone already, yay! Now you decide what you want to do next. Remove the bloatware? It's important that you don't lump everything together when trying to figure out what you need to do.
It seems like the first step you need to do is get ADB working and recognizing your phone when it's plugged in. ADB is necessary because it provides all the tools/commands necessary for us to interact with the phone through the command line. Windows is notoriously bad about the USB drivers. That's why the Ubuntu method was streamlined for people so they wouldn't have to deal with it. (Linux and Mac have no such usb driver issues.)
ocswing said:
....
It seems like the first step you need to do is get ADB working and recognizing your phone when it's plugged in. ADB is necessary because it provides all the tools/commands necessary for us to interact with the phone through the command line. Windows is notoriously bad about the USB drivers. That's why the Ubuntu method was streamlined for people so they wouldn't have to deal with it. (Linux and Mac have no such usb driver issues.)
Click to expand...
Click to collapse
thanks for the reply.
yeah i rooted via the ubuntu disc, but then all the other steps people were telling me were using the sdk, getting the drivers, htc sync, yada yada. via windows. so thats the method i've been trying.
is there a step-by-step guide on how to allow 3rd party apps using the ubuntu disc? or... removing bloatware?
is it the same steps, but you just dont have to worry about the drivers?
The steps listed once you're in the SDK are actually the same regardless of what OS you're using.
So for Ubuntu install the SDK. Steps should be the same, just make sure you download the Linux version. Then you'd open a Terminal window (should be called Terminal in Ubuntu.) Then you should be able to use the same commands/steps you find in the other threads.
Since you've been having trouble getting your phone to connect the first thing to do is make sure SDK can actually see your phone. You should be able to open up your Terminal window, navigate to the SDK folder, connect your phone and then type 'adb devices' in the terminal window. It should then list out your phone as HTXXXXXXXX. X being some numbers and letters. If it does show that then you're on your way.
After that I'd go with removing bloatware and the steps listed in this thread. http://forum.xda-developers.com/showthread.php?t=735255
ocswing said:
The steps listed once you're in the SDK are actually the same regardless of what OS you're using.
So for Ubuntu install the SDK. Steps should be the same, just make sure you download the Linux version. Then you'd open a Terminal window (should be called Terminal in Ubuntu.) Then you should be able to use the same commands/steps you find in the other threads.
Since you've been having trouble getting your phone to connect the first thing to do is make sure SDK can actually see your phone. You should be able to open up your Terminal window, navigate to the SDK folder, connect your phone and then type 'adb devices' in the terminal window. It should then list out your phone as HTXXXXXXXX. X being some numbers and letters. If it does show that then you're on your way.
After that I'd go with removing bloatware and the steps listed in this thread. http://forum.xda-developers.com/showthread.php?t=735255
Click to expand...
Click to collapse
ok cool thanks a lot!
i didn't even think to go back to linux to try this stuff until today at work.
i'll check it out later tonight after i mow the lawn and eat dinner....priorities...
i tried in windows one last time. it actually found the htc sync drivers (i in/uninstalled htc snyc earlier...i guess thats what did it)
adb devices command finds my phone, but when i try and run that .bat file, it goes through a bunch of things, but basically says:
remount failed: operation not permitted
failed to copy...
permission denied
all those types of things. then it says to hit enter and then it restarts my phone
???
did u try installing HTC sync connect phone to htc sync, then unistall the htc sync software usb drivers should stay behind
b_atman said:
did u try installing HTC sync connect phone to htc sync, then unistall the htc sync software usb drivers should stay behind
Click to expand...
Click to collapse
i said i did that above...that was the only way i got the usb drivers to work/recognize my phone...the sdk ones didnt work)
my phone is recognized when i run adb devices command
i'm having issues when i run the .bat file as i said in my last post
my bad
maybe i missed it, after you did the mount command did you do the read/writes permissions change?
b_atman said:
my bad
maybe i missed it, after you did the mount command did you do the read/writes permissions change?
Click to expand...
Click to collapse
uuu, no, whats that?
i thought i just had to open cmd and run the .bat file
so what did i miss now? ha
thanks for your help!
i ran this .bat file
cd\android\tools
adb remount
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
echo update secure set value = 1 where name = 'install_non_market_apps';|sqlite3 settings.db
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
pause 1
adb reboot
I need help rooting my Tb , does anyone have a video or direct me to one that can help! I don't know how to use ADB!
I would take the time to learn ADB or wait until a one click is out. Learning ADB while rooting your phone could easily break it.
what os are you using?
svalle713 said:
I need help rooting my Tb , does anyone have a video or direct me to one that can help! I don't know how to use ADB!
Click to expand...
Click to collapse
Honestly just take the time to read the procedure, other help topics on these forums, and take your time when actually going through the procedure.
I had never used ADB either or rooted an android phone for that matter, and I gotta say, rooting the TBolt was cake.
I just took my time with it ensuring I typed in the commands properly.
But if you need a video, here you go: http://www.droid-life.com/2011/03/22/video-rooting-the-htc-thunderbolt/
what drivers do we need for the process, are they only the htc sync drivers? where can these be found?
Android SDK should be extracted/installed straight onto the C:\ directory to make it easy. Open the android-sdk folder and in it is a program sdkmanager.exe, open that and you can reject all of the downloads but scroll down and install one called the "google usb driver package" which may be necessary, I'm not sure (you should also have the htc sync drivers installed)
The contents from the "exploit.zip" should be extracted into the folder "platform-tools" within the android-sdk folder. Plug in your phone to the usb and open the command prompt. To get started open the command prompt (like a dos prompt) and get the prompt into the folder 'platform-tools' and type "adb devices" then hit enter. If your phone is connected and you have "usb debugging" enabled on your phone from the settings, your phone should appear and you can begin the instructions from jcase
Heres the deal. I have a MAC with a newly installed hard drive. On my old hard drive I had everything setup with SDK and Adb but that was when I had an HTC Hero. My problem is this: When in terminal my damn computer keeps prompting me for a password but it doesnt allow me to type anything except control C which aborts the program. It never was like that with the old hard drive.
2. Ive dl SDK for MAC unzipped it and saved it to my desktop and my hard drive.
3. When I click on tools it says "adb_has_moved.txt"
4. It says the adb tool has moved to platform-tools/ and if you dont see this directory in your SDK, launch the SDK and AVD manager and install "android SDK Platform-tools and also update my path environment variable to include the platform-tools/ directory, so I can execute adb from any location. What the heck does this mean and how do I fix it. Also how do I know if SDK is installed correctly.
5. I DL some version of eclipse that was recommended from SDK but I dont know how to use that either.
6. I have tried all the root methods shown here in XDA except the on with the Dock since I dont have a dock.
7. Also ADB does not recognize my device and my debug is selected. I cannot get it to find my device.
8. One last question when some instructions say unzipped and move the root exploit to /data/tmp/ is that the file labeled under sdcard/data or is it the one inside the Android Folder listed as "data"
Please anyone help if possible.
let me try that
Stupid question but How do I launch SDK?
laraiza said:
Stupid question but How do I launch SDK?
Click to expand...
Click to collapse
Make sure your phone has USB Debugging Mode enabled. Otherwise, adb will not recognize your device.
Check this thread: http://forum.xda-developers.com/showthread.php?t=879701
However, you will have to modify for MAC.
In my opinion the easiest way to root the Photon is still using the dock method. Otherwise, try the One Click Root method (Torpedo) as mentioned above. Then you don't have to worry about issuing all the commands.
I got it done I got it done. What I did was borrow my daughters windows netbook and the one click method worked on the first try. Thanks to all who replied. I will definitely hit your thanks buttons.
Sent from my MB855 using XDA App
im sorry.. my tool was a one click i dint think i needed to give it instructions.. especially teh part of how to run it on your computer... just fyi.. when invoking sudo (to do things as admin/root) on your computer. you are asked to enter in your password.. as a privacy/security feature it will NOT display any characters.. ergo it looks blank...
as you arent teh first one to run into this issue ill add instructions for mac users ( i know anyone running linux can figure out how to run a bash script, and windows users have a bat file after installing 209387249087 drivers... but they still figure it out ;P)
Hi guys,
EDIT: See the last posts - I have figured this out, and tried to include helpful information, if you are having this problem too.
Firstly please accept my apologies if this has been answered already. I have searched the forum, and the Internet, and cant find specific instructions, or a guide that I can follow with any success.
I stupidly deleted system files from my Kindle, but now I have purchased a fastboot cable, and I'am able to get it into fastboot mode.
I have correctly installed the ADB Drivers, and the device is now recognized by my Windows 7 Device Manager. It shows 'Android ADB Interface'.
I would guess that I need to flash the entire Kindle, but I'm unsure of how to do this, as I cannot seem to access the device at all. It currently loops when booting, giving me no time to see it as external storage via My Computer.
Please would someone more versed in this, guide me specifically through how to get myself back up and running again? I would be forever greatful.
I have SDK and JDK installed, but do not have the knowledge I need to learn how to use them properly.
Thanks so much in advance.
urbainmenace said:
Hi guys,
Firstly please accept my apologies if this has been answered already. I have searched the forum, and the Internet, and cant find specific instructions, or a guide that I can follow with any success.
I stupidly deleted system files from my Kindle, but now I have purchased a fastboot cable, and I'am able to get it into fastboot mode.
I have correctly installed the ADB Drivers, and the device is now recognized by my Windows 7 Device Manager. It shows 'Android ADB Interface'.
I would guess that I need to flash the entire Kindle, but I'm unsure of how to do this, as I cannot seem to access the device at all. It currently loops when booting, giving me no time to see it as external storage via My Computer.
Please would someone more versed in this, guide me specifically through how to get myself back up and running again? I would be forever greatful.
I have SDK and JDK installed, but do not have the knowledge I need to learn how to use them properly.
Thanks so much in advance.
Click to expand...
Click to collapse
what is the fastboot cable? where can I get it? can a normal usb cable do the job?
goodayoo said:
what is the fastboot cable? where can I get it? can a normal usb cable do the job?
Click to expand...
Click to collapse
You definitely need the fastboot cable to push files through the ADB Interface dude. You can buy one for dirt cheap on EBay. Then all you do is simply plug it into your PC and Kindle, and it should put the Kindle straight into Fastboot mode.
Then you need to install the ADB Drivers for the Kindle.
From there, I'm stuck I'm afraid.
urbainmenace said:
You definitely need the fastboot cable to push files through the ADB Interface dude. You can buy one for dirt cheap on EBay. Then all you do is simply plug it into your PC and Kindle, and it should put the Kindle straight into Fastboot mode.
Then you need to install the ADB Drivers for the Kindle.
From there, I'm stuck I'm afraid.
Click to expand...
Click to collapse
OK，I think I'm gonna get one and give it a try. the only way to fix this brick is in the ADB Interface I'm sure. though I also don't know How to do.
I've finally figured out how to get ADB up and running, and how to start command prompt. I found this link helpful:
developer.amazon.com/public/resources/development-tools/ide-tools/tech-docs/05-setting-up-your-kindle-fire-tablet-for-testing
If anyone needs help pushing files through ADB, I recommend that link!
Do the following to detect your Kindle Fire tablet through ADB:
Open a command prompt window.
Change directory to your Android SDK platform-tools directory. - To do this, find out where SDK is installed on your PC. Copy the path.
Type cd in command prompt, then space, then paste the directory path. EG, C:\Users\Administrator\sdk\platform-tools
Hit enter, and the command line will change to read C:\Users\Administrator\sdk\platform-tools.
Run the following commands and confirm that the serial number for your Kindle Fire tablet appears in the list of devices.
adb kill-server
adb start-server
adb devices
Then follow the rest of the guide. I think all you need to to do, is push a system update through, by putting the file in the tools folder of SDK. This should make the device update, and put back any critical system files that you had previously deleted.
Now I'm just having issues with it finding the device, so I'm going to charge the Kindle for a few hours, and then try it again.
:good:
urbainmenace said:
I've finally figured out how to get ADB up and running, and how to start command prompt. I found this link helpful:
developer.amazon.com/public/resources/development-tools/ide-tools/tech-docs/05-setting-up-your-kindle-fire-tablet-for-testing
If anyone needs help pushing files through ADB, I recommend that link!
Do the following to detect your Kindle Fire tablet through ADB:
Open a command prompt window.
Change directory to your Android SDK platform-tools directory. - To do this, find out where SDK is installed on your PC. Copy the path.
Type cd in command prompt, then space, then paste the directory path. EG, C:\Users\Administrator\sdk\platform-tools
Hit enter, and the command line will change to read C:\Users\Administrator\sdk\platform-tools.
Run the following commands and confirm that the serial number for your Kindle Fire tablet appears in the list of devices.
adb kill-server
adb start-server
adb devices
Then follow the rest of the guide. I think all you need to to do, is push a system update through, by putting the file in the tools folder of SDK. This should make the device update, and put back any critical system files that you had previously deleted.
Now I'm just having issues with it finding the device, so I'm going to charge the Kindle for a few hours, and then try it again.
:good:
Click to expand...
Click to collapse
good to hear that! I hope you can tell me how to push the system folder into the fire hdx via ADB ,I got a thor-amazon-os-13.3.1.0.zip file.
goodayoo said:
good to hear that! I hope you can tell me how to push the system folder into the fire hdx via ADB ,I got a thor-amazon-os-13.3.1.0.zip file.
Click to expand...
Click to collapse
In command prompt, there is an ADB push command, so I think all you do is type that, then the path of the file.
To list all the commands you can use, change command prompt to your platform-tools folder within SDK, type ADB in command prompt, and it will give you all the options.
You'll need to unzip the update file first I think.
:good:
bootlooped, adb runs some commands
urbainmenace said:
In command prompt, there is an ADB push command, so I think all you do is type that, then the path of the file.
To list all the commands you can use, change command prompt to your platform-tools folder within SDK, type ADB in command prompt, and it will give you all the options.
You'll need to unzip the update file first I think.
:good:
Click to expand...
Click to collapse
Working with the HDX 8.9.
I think I have deleted some of the system files also. I was reloading a safestrap backup and rebooted but the backup had failed to complete. I don't know what may be missing from the system files and would like to push the system files onto the device.
Right now I get a gray kindlefire screen for about 90 seconds, during which I have adb access, then it goes to the color kindlefire screen and asks if I want to Restore to Factory Defaults or reboot. I finally subjected it to the Restore to Factory Defaults, but that just wiped the cache and data partitions, I don't see where it did anything to the system files. It did not change my adb access.
In adb I can push files to some locations but others say: failed to copy ....: Read-only file system.
I cannot run shell commands
# adb shell
soinfo_link_image(linker.cpp:1617): could not load library "/vendor/lib/libNimsWrap.so" needed by "/system/bin/sh"; caused by load_library(linker.cpp:745): library "/vendor/lib/libNimsWrap.so" not foundCANNOT LINK EXECUTABLE
I was working in Windows 8.1 but have switched to Suse Linux but the results are the same so far.
I have the stock system files but I am not sure how to push them to the device, if it can be done, while the device is trying to reboot.
fastboot
I can put the HDX in Fastboot mode with the adb command. But when I try to pass commands to the HDX I get:
< waiting for device >
and I have to Ctrl-c to stop the process.
Do the fastboot commands only work if you have a fastboot cable???
Since you guys are using adb checkout these threads:
http://forum.xda-developers.com/showthread.php?t=2530623 Factory Reset
http://forum.xda-developers.com/showthread.php?t=2636817 [Video Tutorial] GAPPS + Amazon from Cpasjuste
http://forum.xda-developers.com/showthread.php?t=2638241 How to un-boot-loop (another way)
http://forum.xda-developers.com/showthread.php?t=2598577 [TUT/FIX] Fix the Boot Loop on Kindle Fire HDX 7"
This guy may also be able to help, forum member: GSLEON3 Post #16
http://forum.xda-developers.com/showthread.php?t=2580989&page=2