[Q] afterupgrade.bat failed - Atrix 4G Q&A, Help & Troubleshooting

hi, I just root my atrix v1.2.6 and update to 1.5.7 but when I run afterupgrade.bat i get this:
/osh/sbin/frozenfish: not found
and never shows the request superuser on the phone.
can you help me?
thanks

Hey sounds like something didnt go right in the beforeupate.bat .. if you have file explorer navigate to /osh/sbin and see if you have frozenfish there..if not you probably have to redo the process.

i redo de process 3 times, i always have success rooting v1.2.6. i tested with titanium backup and everything is ok but I have this problem when i tried to root v1.5.7

Ok so when you are rooted on 1.26 you run the beforeupgrade.bat (gladroot.bat in latest version) file correct? Does it give you any errors? At that point in 1.26 do you see the frozenfish before you upgrade? If so Then you do the update, then you run the afterupgrade.bat...if its not there before the update it wont be there after
Sent from my MB860 using XDA App

i had the same issue until i re-read the instructions (for windows users) and pressed control while double clicking afterupdate.bat
then it worked fine

That tip is for windows 7 users, im using windows XP.
Can somebody upload frozenfish file?
Thax

I am on XP too. Hope u find your answer

i just need that file

Wen you run the root bat (don remember the name) hit yes wen ask if you gonna update to 1.5.7 this make a backup of the nesesary files
Srry 4 my bad english
This work for me
Sent from my MB860 using XDA App

Jajaja, thx penpen. We hace to talk spanish next time.

Related

Easy way to get 2.1 on E10i

This is everything you need to get 2.1 on your X10 mini. It doesn't mind your zone, the version you have or if it's unlocked or not. Also it's a easy way to unbrand your phone.
Edit: The method is very easy and WORKS (tested few phones and also some of you), but do it in your own risk.
1) You have to root your phone. If you haven't rooted yet, install "Androot" (it's attached to this post), run it and press root. Be sure the app says: rooted! if not, repeat it again.
2) Get "Root Explorer". You can get it on Market or wherever you can find it (because it isn't free ). Install it, run it, and give it root privileges.
3) Unrar and copy build.prop on your sdcard. This build.prop is from a GENERIC 2.1 ROM (1237-8596_R3B). I attached this file cause it's easier than editing the existing one.
4) Run Root Explorer, push the button "mount R/W" copy the build.prop that you copied in /sdcard over /system/build.prop and overwrite it. Push the button again "mount R/O". Edit: (Make a backup of your old file if you want, I haven't tested but maybe you can do the same to revert to the old version, I dunno!).
5) Reboot the phone. This is important. In some phones, you could get some error messages and the home app crashes continuosly, but don't worry about it.
6) Once rebooted, turn off your phone.
7) Run SE update service. When you hold the back button to plug the cable, DON'T RELEASE IT, although the program says you can release it, that's important, because if not, it won't work. Wait a while (be patient) and then the program will say that you have a new update available. Now you can release it and install the update. Edit: If the program says that you have the newest version, don't worry, only choose repair... and that's all !!!
Enjoy.
Extra info:
- This method (or trick) could be over with an update of SEUS. So take advantage of it ASAP if you want to do it.
- You can edit the build.prop and change the ROM version you want. I.e. if you want to change the zone, only do the same with the build.prop data of the exact ROM you want, repair and that's all.
- If you repair and it doesn't change anything, delete the "db" folder in SEUS directory on your computer, to force to re-download the firmware. Repeat the process again.
This thread was only to make a "clear" and easy text to do it, without using a shell. Thanks to all who helped me and the authors of the other posts.
PS: Sorry about my English
Anybody got the build.prop for the u20i? The mini pro?
darfito, is it from a u20a or u20i version?
E10i, X10 mini (isn't pro)
Thanks. I have a mini pro, guess I'll have to wait a little longer.
So is this a global generic or Nordic generic?
Sent from my E10i using XDA App
Looks like Indonesia Generic (judging from the 1237-8596 code).
Certainly I don't have any idea. I flashed my phone via Davinci with that ROM. In the ROM name didn't appear any region, like a global generic one. There were the NCB (nordic, I think) and ID (i don't know where is from), and this one. I think maybe a chinesse ROM, but I'm not sure. It works great.
I used my build.prop with my girlfriend's x10 mini, exactly like I described in this method and worked perfectly. We have the same ROM installed, so I don't know where is it from!
thank you my brother from another mother !
pacoguevara said:
Thanks. I have a mini pro, guess I'll have to wait a little longer.
Click to expand...
Click to collapse
I think if you get a build.prop from any generic x10 mini pro updated to 2.1, you can do the same process. Ask to a x10 mini pro owner who had updated to 2.1 and try.
Also you can edit the build.prop, but I don't know the data for the pro, search on the forum or google.
The point is that this trick could be finnished when SE update service updates itself... so my advice is if you want to unbrand and get a generic 2.1 take this ASAP.
Did anybody test with an e10a device? Once flashed any 3G issues?
porcupineadvocate said:
Anybody got the build.prop for the u20i? The mini pro?
Click to expand...
Click to collapse
need build.prop 4 the u20a mini pro anybody please thanks
A great effort and thank you, but I only want to use a global generic, I'm a bit funny like that, if anyone knows the code for global generic mini I would be hugely grateful
Sent from my E10i using XDA App
That's a generic one. The global generic doesn't exist and won't exist. There're generic ones in each zone/country and they're the same between them, there're only minimal changes like some language added, or some extra stuff added (like keyboard), but nothing else. Mine is a generic world one, but made to be rolled out in China or wherever.
The roll out is stepped, by country/zone to ensure a smooth update, nothing else.
I'm only afraid about UK update, cause in SE UK twitter, they say that the update is delayed because of laws and regulations... or something like that... that sounds very bad... so, also for that point, the firstly released ones should be the less modified... I think...
SG-generic also seems to work: 1238-7173 (this is for the Mini PRO u20i, not the Mini!).
I waited for SG instead of Nordic because I'm pretty sure that Singapore uses English keyboards and won't be messing about with Nordic special characters and such... hopefully it won't turn up with Singapore-specific modifications. But the speed of the release suggests that it must be quite similar to the Nordic firmware.
help..!!!!!
darfito said:
This is everything you need to get 2.1 on your X10 mini. It doesn't mind your zone, the version you have or if it's unlocked or not. Also it's a easy way to unbrand your phone.
1) You have to root your phone. If you haven't rooted yet, install "Androot" (it's attached to this post), run it and press root. Be sure the app says: rooted! if not, repeat it again.
2) Get "Root Explorer". You can get it on Market or wherever you can find it (because it isn't free ). Install it, run it, and give it root privileges.
3) Unrar and copy build.prop on your sdcard. This build.prop is from a GENERIC 2.1 ROM (1237-8596_R3B)
4) Run Root Explorer, push the button "mount R/W" copy the build.prop that you copied in /sdcard over /system/build.prop and overwrite it. Push the button again "mount R/O".
5) Reboot the phone. This is important. Surely you'll get error messages and apps crashing, but don't worry, once rebooted, turn off your phone.
6) Run SE update service. When you hold the back button to plug the cable, DON'T RELEASE IT, although the program says you can release it, that's important, because if not, it won't work. Wait a while (be patient) and then the program will say that you have a new update available. Now you can release it and install the update.
Enjoy.
Click to expand...
Click to collapse
my whole phone is not working home screen force close.....and de update is nt working plz help me plz plz plz
You need to elaborate.
Ah ok, thanks for the info, only wanted a global generic cost I had seen the big x10 had the option of that firmware,i will try your method to update after i have had a coffee or two to wake up
Sent from my E10i using XDA App
update worked using your method only prob is now cant connect to my wifi network, anyone have any ideas?
sanjay_bandaru said:
my whole phone is not working home screen force close.....and de update is nt working plz help me plz plz plz
Click to expand...
Click to collapse
The main home apps crashes when you reboot, that's normal. You have to power off, use SEUS and don't release the back button till it says there's a new update. If you say what's the problem, I could help you (error message on SEUS). I just done it again with a friend's one and worked perfect. Too much easy.
About wifi problem, restart it or check your router, mine's working fine. If the update worked, remember that it's an official ROM and also an official program (SEUS), so i don't think this method was the problem.
Sent from my E10i using XDA App

Update

Can someone please post how to flash your update to 2.1...
im, sry for nagging, but ive posted for help on several threads and still noone replys. and there's too many threads about 2.1(optimizer, flashing, etc...) and its confusing which software to download and you get the idea...
im not very tech savvy, so i would greatly appreciate if someone posts a detailed yet simple explanation on how to flash your xperia x10 to 2.1 from 1.6.
it'll only take 20 min of your valuable time tops, and it will help a LOT of people who are still confused on how to do it get android 2.1.
oh and if this helps a little...
Country: Singapore
Brand: Singtel
Carrier: T-Mobile USA
Unrooted, basically stock phone.
computer info:
Windows Vista, 32 bit I believe
Doesn't get any simpler http://forum.xda-developers.com/showthread.php?t=825675
Follow this thread is really simple and the phone will be flashed with World Generic 2.1 in about 2 minutes... http://forum.xda-developers.com/showthread.php?t=825675
Hope you can do it.
hey guys thanks for all the help, i looked at that thread and the same problem, it links to other threads which tell me to do other things like disable uac in vista, what is uac lol?
then it wont work in java or something, etc...
and there's like 3 different files to download
its very confusing.
can someone with a windows vista computer tell me exactly how they did it with a link to the most up to date flasher?
apr1000 said:
hey guys thanks for all the help, i looked at that thread and the same problem, it links to other threads which tell me to do other things like disable uac in vista, what is uac lol?
Click to expand...
Click to collapse
UAC.
apr1000 said:
can someone with a windows vista computer tell me exactly how they did it with a link to the most up to date flasher?
Click to expand...
Click to collapse
MarylandCookie said:
Okay guys.
Here is Global World Firmware 2.1 Version with x10Flasher 2.1 (old 1.6 Firmware can not be flashed with this at the moment).
Windows 7/Vista Users should diasable UAC!!
Download Firmware and Flasher:
http://www.multiupload.com/9N5BJ7II13
Thanks to Bin4ry, jerpelea and the_laser for x10 Flasher 2.1
The Global World firmware is inside the "firmware" folder and must reside within this folder!
Just run X10flash.bat and follow the instructions.
Click to expand...
Click to collapse
What's confusing about that.
http://forum.xda-developers.com/showthread.php?t=825201
ok, so i believe that one has the most up to date flasher right?
so i disable UAC by going to MSCONFIG and hitting the disable UAC then restart my pc
then i go to the thread linked at the top, download the 2 files, extract everything. put the firmware downloaded into the empty firmware folder. hit the .bat file. hit the values it asks me for(3 for vista, yes for delete user data, and xperia x10)
then when prompted to, turn off my x10 and plug it in while its in flash mode and it'll do the rest right?
am i missing anything?
x10i user thanks so much for ur help, very appreciated that ur taking ur time to help me
apr1000 said:
am i missing anything?
Click to expand...
Click to collapse
Nope. Report back when you've done or have any issues.
ok, so im gonna do all of this on tuesday, since i have a chemistry and a physics exam next week and need to study for them. So i will tell you guys how it went on tuesday.
one last thing though...how about backup?i have my contacts and calender synced with the SE servers but if i want to restore them i have to do it manually which takes hours.
can i use the default backup and restore app? any suggestions?
thanks
suggestions for backup use MYPHONE EXPLORER 1.8 and connect using/installing the supplied apk (you will find it in the myphone explorer installation folder)
once connected copy/sync all your contacts and backup your messages (you can also backup your other stuff like photos,music etc but they are on your sd anyway)
once you have done this use oneclick root app on your 1.6 such as UNVERSAL ROOT etc to root your 1.6 and then use Titanium backup to do a FULL BACKUP of all your apps and data settings
If your not sure about using the flasher program as suggested above then use the method Simple way to switch from one 2.1 version to another method by editing your build.prop etc files using root explorer in conjunction with SEUS yep its still a little more messing but it works pretty well on just about any machine that can run SEUS
1 last thing i forgot about, i have SEUS and pc companion installed on my PC, should i delete those or will the flash program still work with them on my pc?

[Q] Stuck on Gingerblur beta 7.7...

Hello all,
I installed Gingerblur beta 7.7 on my phone few days ago.
It's nice but since the RC1 and now the OTA, I wish to revert back to stock (rooted)...
I got this RSD procedure but the start button is not accessible...
Every 2 to 3 hours, I have this reminder asking me to do the OTA which of course doesn't work...
Please help me
Why don't I just use the uninstall from Beta 7.7 ?
Is there any reason why we shouldn't use the uninstall file from the beta 7.7 ?
You can turn that reminder off...
Sent from my MB860 using XDA Premium App
Turn reminder off...
This would be a first step...
How to do that?
Few things, for RSD, drag and drop the sbf file into the RSD window, that will make the start button not greyed out.
If you then get writing failed 0x71000 (my experience), put the sbf file at the root of c, rename it a.sbf. Close RSD, remove the log files from the app directory. Try to do the flashing. If it fails, check the logs and you should see some bogus characters added to the end of the filename. Add as many characters to the filename as bogus ones (my file ended up to be a123.sbf) and try again. It worked for me.
For the OTA, you can disable it with Titanium backup and freezing the udpate app.
Thank you so much ! I have been stcuk on this for hours, looking everywhere !
did you figure it out? move the SBF file to your C: root or documents or even the Temp folder. for some reason this is a known issue. also note: 2 out of 5 times i tried to SBF on my 64 bit machine i was successful. i ended up grabbing an old laptop with windows 7 32bit and worked like a charm.
hope this helps.
The drag and drop!
Thank you all for your help!
What did the trick was drag and drop...
everything went smoothly from there.
Now waiting for a gingerblur compatible with 1.57!
Thanks again!

[Q] ERROR opening RUU EXE

Hi , after i download HTC flyer RUU file from filefactory . it give me a .EXE file but the problem is when i try ran the program it say that .
This version is not compatible with the windows you are running . check your computer system information to see whether is 32 bit or 64 bit version of the program .
is there anyone out there know how to solve this ??? big thanks to anyone there willing to help ..
thank your very much
anyone ?? please help . HTC user
Which version of windows
What are you trying to do? Are trying to update? Are you rooted?
you probably have a corrupt download, try downloading again. Clear your browser cache first
mcord11758 - i using window 7 home edition . why ? do i need to use other version ?
geebee1932 - i trying to make my ROOTED flyer (version 2.3.4) back to (version 2.3.3)
i also tried download the ADB.exe and fastboot.exe both not working as well when i tried opening the file. i got my RUU.Exe . now the main problem is how and what kind of step ? i heard my friend saying that i need to make a goldcard for the RUU.exe . ah man , what should i do now ?
DigitalMD - it can't be i use another method to download the file , is still the same old problem , i even call my friend and told him to open the file , is still the same problem ?
any expect know how to revert back to 2.3.3 without using RUU.EXE
please guide me along , currently i still looking for help around too . it will be a great help , if any expect willing to give me some tips on what to DO ?
What version is your flyer
Sent from my HTC Flyer P510e using xda premium
Here is what I would do. Go to www.goodandevo.com. Download the update you want as a zip file put the zip file on your sd card then boot into recovery and flash the zip. To boot into recovery hold volume down while powering up or Rom Manager has an option to boot into recovery.
mcord11758 - i using 2.3.4 at 2.27.707.1 any solution to go back to 2.3.3 ?
geebee1932 - is a broken link u gave me? what update is that
HELLO everyone!!!! i have error opening RUU file and what should i do to downgrade back to 2.3.3
Best buy flyer right?
Edit looks like from your version number you are a asian flyer. You need to get the full package and Fastboot flash it if you can not run the ruu. I do not have that file. You are the only person I can remember having your issue. Maybe something wrong with the dl on the thread. Maybe try and find alternative source
mcord11758 said:
Best buy flyer right?
Edit looks like from your version number you are a asian flyer. You need to get the full package and Fastboot flash it if you can not run the ruu. I do not have that file. You are the only person I can remember having your issue. Maybe something wrong with the dl on the thread. Maybe try and find alternative source
Click to expand...
Click to collapse
mcord11758 - yup is a asian flyer sadly I very trouble on what to do with this tablet . IT really need a way to downgrade back to 2.3.3 or else i be stuck at 2.3.4 with those poor performance.
any recommend solution for me .
i so glad that someone here to answer my question , THANKS mcord11758
Without being able to open the ruu I can not think of a way short of someone with the same build and flyer type would upload the Rom zip for you.
Can you post the link to the ruu you are trying to download
Sent from my HTC Flyer P510e using xda premium
mcord11758 said:
Without being able to open the ruu I can not think of a way short of someone with the same build and flyer type would upload the Rom zip for you.
Can you post the link to the ruu you are trying to download
Sent from my HTC Flyer P510e using xda premium
Click to expand...
Click to collapse
oh gosh , finally=) thanks god man . i really appreciate with all the time you spend over here .
alright here are my issue with my flyer , the main reason why i wanted to downgrade my flyer is because i wanted to use back whatsapp in my tablet . previously when i was ranning 2.3.3 everything was fine but when HTC send me FOTA and upgrade to 2.3.4
it just screw up everything thing . i could't use whatsapp like normally as the application detected i using tablet and disable .
I try ask my friends and search around the forum , saw one of the post say that i must revert it back to 2.3.3 so that i can use back whatsapp .
so i suppose i need to download this file and execute in my Laptop but it just won't work =( . the link is look BELOW
RUU_Flyer_hTC_Asia_WWE_1.48.707.4_Radio_20.3501.30 .089BU_3809.05.04.10_M_release_193927_signed
http://www.filefactory.com/file/cfdd...927_signed.exe
i doesn't know why i could't open this .exe file at all . PLS HELP !!!!!
thankssss
wwe007 said:
oh gosh , finally=) thanks god man . i really appreciate with all the time you spend over here .
alright here are my issue with my flyer , the main reason why i wanted to downgrade my flyer is because i wanted to use back whatsapp in my tablet . previously when i was ranning 2.3.3 everything was fine but when HTC send me FOTA and upgrade to 2.3.4
it just screw up everything thing . i could't use whatsapp like normally as the application detected i using tablet and disable .
I try ask my friends and search around the forum , saw one of the post say that i must revert it back to 2.3.3 so that i can use back whatsapp .
so i suppose i need to download this file and execute in my Laptop but it just won't work =( . the link is look BELOW
RUU_Flyer_hTC_Asia_WWE_1.48.707.4_Radio_20.3501.30 .089BU_3809.05.04.10_M_release_193927_signed
http://www.filefactory.com/file/cfdd...927_signed.exe
i doesn't know why i could't open this .exe file at all . PLS HELP !!!!!
thankssss
Click to expand...
Click to collapse
my software number is 2.27.707.1
need to revert back to the old version !!!
anyone out there that kind enough to guide me just a few step on what to do.
your issue is not about the version of gingerbread you are on. please see this thread
http://forum.xda-developers.com/showthread.php?t=1179839&page=4
in particular this post (I do not use the app so I can not confirm this method works)
[FIXED] WhatsApp working on Flyer
--------------------------------------------------------------------------------
Hey all,
After much effort I have managed to get my 3g Flyer running on Leedroids ROM to run WhatsApp messenger.
Here's what I did.
(You will need an android phone[rooted] for this to work. If you try this, and you break something, its your problem, its at your own risk.)
*Make sure you have already installed and attempted to register your flyer on WhatsApp.
*Install Root Explorer on your phone and tab.
*On your phone back up your WhatsApp data.
*Now delete the WhatsApp application from your phone
*Wait 5mins so all data is cleared from your phone.
*Now download WhatsApp from the market again
*When asked to register, use your Flyers number.
*Your Flyer will receive the registration message - either forward the message to your phone, and WhatsApp will pick it up, OR - just wait for the timer to expire and insert the 3 digits from the message.
*You would have created the account now.
*Now, on your phone, using Root Explorer, navigate to data/data/ and zip the folder 'com.whatsapp'
*Using bluetooth or email, send the new zip file to your Flyer.
*On your Flyer, navigate to Data/data and DELETE 'com.whatsapp'
*Now extract the zip file, and copy/move the folder into data/data.
*Attempt to run WhatsApp, but it will probably forceclose after the registration window.
*Using Rom Manager, I run the Fix Permissions option and rebooted my Flyer
*I've now got full function WhatsApp on my 3G Flyer!
*Don't forget to delete WhatsApp and restore your backup on your phone.
Dont forget to hit Thanks if this helped...
Sent from my GT-P7500 using XDA App

Please install CSMG B2C Client Tool" "Select tool ->B2C Client setup menu error

Please install CSMG B2C Client Tool" "Select tool ->B2C Client setup menu error
hello, im new on rooting my lg optimus l9, have root my other divices before like the htc wildfire s, huawei u8150 htc my touch 4g. I was rooting the p769 v-10g version using the new root from cmahendra but when i reach the part that i have to create a home server and than flashing the kdz using UpTestEX_mod2_marwin.exe i get the message when trying to update: Please install CSMG B2C Client Tool" "Select tool ->B2C Client setup menu. I don"t know what to do can someone help me please.
cehatro said:
hello, im new on rooting my lg optimus l9, have root my other divices before like the htc wildfire s, huawei u8150 htc my touch 4g. I was rooting the p769 v-10g version using the new root from cmahendra but when i reach the part that i have to create a home server and than flashing the kdz using UpTestEX_mod2_marwin.exe i get the message when trying to update: Please install CSMG B2C Client Tool" "Select tool ->B2C Client setup menu. I don"t know what to do can someone help me please.
Click to expand...
Click to collapse
Just do exactly what it says. In the app go through the menus at the top of the app window and find the B2C Client setup. Run it.
i fixed the problem in my case i had to delete the lg folder thanks to someone in the forum, and then i when to tool to make the program reinstall that and it worked
please help
cehatro said:
i fixed the problem in my case i had to delete the lg folder thanks to someone in the forum, and then i when to tool to make the program reinstall that and it worked
Click to expand...
Click to collapse
Can you please detail all the steps you took. i'm stuck here.:crying:
"I was having similar problems a while ago. Delete all the flash stuff and extract rootflash folder to C:\Rootflash I was trying with the flash stuff in one folder and then the https folder in another and I kept getting the problem you describe. After you've done this go to C:\Programdata and delete the LG folder completely. Restart. Start small server from C:\Rootflash\https as administrator. Start the flashing program again. Tools>Install b2capp. After this it should go as planned" -tablechair
I QUOTED WHAT TABLECHAIR DID AND IT HELPED ME ADVANCE IN THE ROOTING PROCESS AFTER THAT FOLLOW THE NEXT STEP OF CMAHENDRAS ONE THING FOR SURE ONCE YOU DELETE THAT FOLDER ITS GOING TO REAPEAR ONCE AGAIN WHEN YOU PRESS TOOLS>INSTALL B2CAPP WHICH IS GOING TO INSTALL SOME STUFF THAT WASNT THERE BEFORE AND BECAUSE OF THE YOU ARE UNABLE TO ADVANCE TO INSTALL THE KDZ FILE.
ONCE YOU ARE ABLE TO ADVANCE AND FOLLOW THE STEPS OF FLASHING THE KDZ AS IN THE PICTURE OF THE TUTORIAL FROM CMAHENDRA YOU WILL SEE A NEW WINDOW WHERE THE LG UPDATE TOOL IS GOING TO "DOWNLOAD FROM THE SERVER " YOU ARE GOING TO OPEN C:\ProgramData\LGMOBILEAX\Phone ONCE YOU SEE THAT THERES SEVERAL BIN FILES OF DIFFERENT NUMBERS SHOWING UP AND YOU SEE THE BIN(6) THAT IS THE ONE THAT YOU DOWNLOADED YOU SIMPLE COPY THE DOWNLOADED BIN AND PASTE IT THERE A WINDOW WILL SHOW UP IF YOU WANT TO CONTINUE TO REPLACE THE ONE THAT IS IN THERE ONE IT IS REPLACED JUST SIT AND RELAX AND WAIT UNTIL THE PROGRAM FINISHES THE PROCESS AND LET IT REBOOT THE PHONE AND WAIT UNTIL IT REACHES 100%.
got it working after an hour of torture.. started praying to God... nd it worked thanks for the info.. hope it helps people who get stuck at this step and search it online...
your welcome its good that it worked for you as well, its thanks to tablechair that helped me in this portion of the process of rooting where i was stuck. enjoy your rooted for as i am
this is kinda where im stuck i guess i can't even get small server to install at all i try to do the run it and it says not found
There is no installer for shttps just right click the exe and run as admin.
I'm having the same problem. Could someone please elaborate on the steps they took to get through this?
Thanks!
Tablechair said:
There is no installer for shttps just right click the exe and run as admin.
Click to expand...
Click to collapse
i dont see the exe besides "uninst".
If you are trying to find the exe file it should be under
RootFlash >> shttps >> http
where http is the name of the application (it will show up as an '.exe' if you have setting to view file extensions on)
JustinRawr said:
i dont see the exe besides "uninst".
Click to expand...
Click to collapse
Something got messed up when you extracted the archive. Download and extract again.
Another fix for this problem:
Change the server root folder of shttps to the correct directory. If you have the http.exe in D:\RootFlash\shttps then your correct server root directory is:
D:\RootFlash\shttps\www\
If this directory is wrong, the LG Tool can't find the necessary files on the HTTP Server and will abort the flashing process.
Protomartyr said:
If you are trying to find the exe file it should be under
RootFlash >> shttps >> http
where http is the name of the application (it will show up as an '.exe' if you have setting to view file extensions on)
Click to expand...
Click to collapse
Your anitvirus is blocking the program and quarantining it. You need to temporarily disable antivirua so it will allow the program to be extracted.trust me i was wondering the same thing for almost an hour.
Virusbetax said:
Your anitvirus is blocking the program and quarantining it. You need to temporarily disable antivirua so it will allow the program to be extracted.trust me i was wondering the same thing for almost an hour.
Click to expand...
Click to collapse
+1 good. Even I Suggested this someone before. Many pals these days going in wrong directions instead of checking basic things.
INSTALLING B2C OR ANYTHING SUCH CRAP IS NOT REQUIRED. NOT EVEN RUNNING WINDOWS ENBLER. I added it just for satisfaction of few.
Not only pc antivirus, If there is LOOKOUT anti-virus in phone, u need to uninstall or disable it also.
Sent from my LG-P765 using xda app-developers app
Virusbetax said:
Your anitvirus is blocking the program and quarantining it. You need to temporarily disable antivirua so it will allow the program to be extracted.trust me i was wondering the same thing for almost an hour.
Click to expand...
Click to collapse
Ah that was the problem! Thanks! And thanks to all those with your suggestion's as well :victory:
Just wanted to say I'm officially rooted now! Thanks everyone!
good thing it worked for everyone to root the phone everyone has to give credit to tablechair that originally helped me to resolve my problem on installing the kdz file
Help!
When i try to upgrade test on the test tool it tells me to install the csmg b2c client tool. when i go to the setup it tells me its complete but when i try it again it says it again. it goes in like a loop and idk what to do please help!

Categories

Resources