Originally posted by doixanh.
Tested by me.....
Look in top-left corner:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Minimum frequency 122MHz.
Intro:
Well, it seems that many people don't want to overclock because of heat, stability..., and just want to have benefits of an undervolted cpu. So here it is my friends. Default voltage level of our kernel is 3-4-5-6-7.
Source on github : https://github.com/doixanh/X8Features
Release history
April 20. v001. Undervolted at the level like X8Overclock: 0-2-3-5-7. If you have sudden reboots with out "SD card safe to remove", please report here.
Requirements:
- Rooted
- Baseband x15
Installation:
Manual installation: it will be better if you can do this way. From now on I will not provide update.zip for xRecovery, because there are some different modules now.
- Download appropriate x8uv-vXXX.zip (for X8), or x8uv-vXXX-x10m.zip (for X10 mini), or x8uv-vXXX-x10mp.zip (for x10 mini pro) below, unzip
- Remount /system as rw
- Push x8uv.ko in to /system/lib/modules
- Edit /system/etc/hw_config.sh, add one line at the beginning
Code:
insmod /system/lib/modules/x8uv.ko # x8 undervolt
Disclaimer
Code:
This module is dangerous! It may lead to system instability and may damage your hardware. I'm not responsible if this module kills your lovely phone. Use it at your own risk!
X10 Mini: http://forum.xda-developers.com/attachment.php?attachmentid=573274&d=1303286994
X10 Mini Pro: http://forum.xda-developers.com/attachment.php?attachmentid=573275&d=1303286994
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
does owains floyo v4 rom have it underclocked already? and underclocked just means setcpu at 122mhz right?
royalbloodvi said:
does owains floyo v4 rom have it underclocked already?
Click to expand...
Click to collapse
Still not, you can install my tweak for owain's rom
hey this is really great! i'm running the gingerbread theme rom, which is supposed to be used with the 006 baseband. would it be possible to use this module with my older baseband? or could you make the module for users in my situation?
thanks!
royalbloodvi said:
does owains floyo v4 rom have it underclocked already? and underclocked just means setcpu at 122mhz right?
Click to expand...
Click to collapse
this is about undervolting, its different than underclocking.
are you sure that owain's v4 does not have undervolting ? his change log shows this
changelog:
v4
Hacked market
Better Wif support (thanks D4rKn3sSyS)
WiFi adhoc and dual band (2,4GHz and 5GHz) enabled
Overclocked and undervolted (thanks module man aka doixanh)
Libril built from sources
......
Hmm i do not see that module loaded in v4 neither is it present in the modules folder and i don't think that the kernel has changed either. So it looks like although the changelog says undervolting , it is actually not present.
I will try this module now and see if it works for mini pro ...
Update : Got the module installed via insmod. Will see how it behaves now .
Thanks anyways
I've been getting a few random reboots after installing this, usually when starting a resource-intensive application. The "SD card safe to remove" message does not display before these reboots so I'm quite confident it has something to do with this.
i have same random reboots. Currently observing with this module deactivated and other memory optimizers uninstalled.
If you're having reboots, maybe it's cuz u have wrong baseband, and yeah, Overclocking module include undervolt, but having it as a standalone module, I think is more stable
undeclocking is different than undervolting...we are talking about undervolting.
About BB and kernel its the latest from SE (BB 015) and Kernel is the same. Dont think its due to that.
anon67 said:
undeclocking is different than undervolting...we are talking about undervolting.
About BB and kernel its the latest from SE (BB 015) and Kernel is the same. Dont think its due to that.
Click to expand...
Click to collapse
Im sorry I dont mean underclock, I mean undervolt
no probs . After disabling undervolting , the phone is stable. I read somewhere that underclocking module has undervolting associated with it. So i think this module is only for those who DO NOT have OC module active or have disabled OC in their ROM.
anon67 said:
no probs . After disabling undervolting , the phone is stable. I read somewhere that underclocking module has undervolting associated with it. So i think this module is only for those who DO NOT have OC module active or have disabled OC in their ROM.
Click to expand...
Click to collapse
Hey bro im using both the uv.ko and the oc.ko on my stock and i have no problems at all. Everything is stable as yo
peace,
evilbarcode.
hmm ..it looks u are using stock SE ROM. that might be the difference why its stable ;-) with OC and UV. Mine is CM 6 - (owain v4 version). Although am not 100% sure whats causing this reboot.
How can I check and see if it is loaded or working good on my vanilla 2.1 ?
Sent from my U20i using XDA Premium App
Related
Originally posted by doixanh.
Tested by me.....
Look in top-left corner:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Minimum frequency 122MHz.
Intro:
Well, it seems that many people don't want to overclock because of heat, stability..., and just want to have benefits of an undervolted cpu. So here it is my friends. Default voltage level of our kernel is 3-4-5-6-7.
Source on github : https://github.com/doixanh/X8Features
Release history
April 20. v001. Undervolted at the level like X8Overclock: 0-2-3-5-7. If you have sudden reboots with out "SD card safe to remove", please report here.
Requirements:
- Rooted
- Baseband x15
Installation:
Manual installation: it will be better if you can do this way. From now on I will not provide update.zip for xRecovery, because there are some different modules now.
- Download appropriate x8uv-vXXX.zip (for X8), or x8uv-vXXX-x10m.zip (for X10 mini), or x8uv-vXXX-x10mp.zip (for x10 mini pro) below, unzip
- Remount /system as rw
- Push x8uv.ko in to /system/lib/modules
- Edit /system/etc/hw_config.sh, add one line at the beginning
Code:
insmod /system/lib/modules/x8uv.ko # x8 undervolt
Kept phone idle overnight and noticed battery loss 0%.
Didn't give update.zip (for xRecovery) as it may replace your custom changes in build.prop and custom tweaks in hw_config.sh
Disclaimer
Code:
This module is dangerous! It may lead to system instability and may damage your hardware. I'm not responsible if this module kills your lovely phone. Use it at your own risk!
X10 Mini: http://forum.xda-developers.com/attachment.php?attachmentid=573274&d=1303286994
X10 Mini Pro: http://forum.xda-developers.com/attachment.php?attachmentid=573275&d=1303286994
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
undervolting increases battery life so will do it n have u tested it on x10 mini ??
udhhay said:
undervolting increases battery life so will do it n have u tested it on x10 mini ??
Click to expand...
Click to collapse
Yep.....have tested it myself. Works great. Check that you have 015 baseband or you may get a boot loop.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
Thanx man, gonna give it a go and let you know!
christophermaisch said:
Thanx man, gonna give it a go and let you know!
Click to expand...
Click to collapse
Click the thanx button.
And yeah.....do let me no if you have any problems.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
Battery reduction seems to be pretty low.....could probably work for a long time now if kept idle....
See top left corner of following image.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
will this affect the CPU performance?
Hi death. First of all thank you for your useful work. I'm going to try this right now.
A few questions first:
a) I have mini cm rc2 with thw right kernel of course . Is it compatible ?
b) Minicm Rc2 has overclocking . It doesn't include undervolt too , does it?
c) I have set my frequrncy to 768 MHz. WIth the undervolt will i have any impact at the performance of my phone ? Will it be slower ?
That's all. Thanks foy your time
Kokkinos77 said:
Hi death. First of all thank you for your useful work. I'm going to try this right now.
A few questions first:
a) I have mini cm rc2 with thw right kernel of course . Is it compatible ?
b) Minicm Rc2 has overclocking . It doesn't include undervolt too , does it?
c) I have set my frequrncy to 768 MHz. WIth the undervolt will i have any impact at the performance of my phone ? Will it be slower ?
That's all. Thanks foy your time
Click to expand...
Click to collapse
this module seems to be unuseful if you are using x08oc.ko because the overclock module is also an undervolting module for frequecies lower than 480MHz i think
extract of doixanh post for x8oc.ko :
doixanh said:
April 06. v002. Experimental! It maybe very unstable! Undervoltage for all frequencies except the max freq (Reduced voltages for 128MHz, 245MHz, 320MHz, 480MHz). This can potentially save battery. I need test results for saving battery from you guys
Click to expand...
Click to collapse
direct link to doixanh original thread
Thanks. Hope this improve the battery life.
ubi4e said:
will this affect the CPU performance?
Click to expand...
Click to collapse
No, not at all. Just set setCPU to ondemand. Then while using the phone, the cpu will work at overclocked speeds and when kept idle will work at undervolted frequencies, thus saving battery.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
matmutant said:
this module seems to be unuseful if you are using x08oc.ko because the overclock module is also an undervolting module for frequecies lower than 480MHz i think
Click to expand...
Click to collapse
Well, just so that you know matmutant, i have lost 0% battery overnight.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
Kokkinos77 said:
Hi death. First of all thank you for your useful work. I'm going to try this right now.
A few questions first:
a) I have mini cm rc2 with thw right kernel of course . Is it compatible ?
b) Minicm Rc2 has overclocking . It doesn't include undervolt too , does it?
c) I have set my frequrncy to 768 MHz. WIth the undervolt will i have any impact at the performance of my phone ? Will it be slower ?
That's all. Thanks foy your time
Click to expand...
Click to collapse
Yes its compatible. Just read post #11 in this thread.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
nishan432 said:
Thanks. Hope this improve the battery life.
Click to expand...
Click to collapse
Yup it does save battery. I lost 0% battery overnight.
P.S. You should try clicking the thanks button once in a while.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
Wow. But is it compatible for MiniCM 6.1 RC2. Because i know that the custom rom has a build in overclocking. I have set my min freq to 122.
death214 said:
Well, just so that you know matmutant, i have lost 0% battery overnight.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
Click to expand...
Click to collapse
but doixanh built this from undervoltig part of the OC module i think, am I wrong ? --> so there's no need to undervolt a yet undervolted cpu
correct me if I'm saying wrong things ;-)
I' followed the first post instructions, but my phone still draining battery. Where I have to write this line "insmod /system/lib/modules/x8uv.ko # x8 undervolt"? Because my phone still draining battery? I've put this line on the start of the "hw_config.sh" file. Is it correct??
jonatutu said:
Wow. But is it compatible for MiniCM 6.1 RC2. Because i know that the custom rom has a build in overclocking. I have set my min freq to 122.
Click to expand...
Click to collapse
Yes! It is compatible.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
aparici said:
I' followed the first post instructions, but my phone still draining battery. Where I have to write this line "insmod /system/lib/modules/x8uv.ko # x8 undervolt"? Because my phone still draining battery? I've put this line on the start of the "hw_config.sh" file. Is it correct??
Click to expand...
Click to collapse
Well....maybe your battery is not in a good health condition.
__________________
If you like my post, click the
button!!
X10 Mini: Android 2.2.1 (MiniCM RC2 by nobodyAtall).
So.. I've to change my mini's battery?? But it can't be changed...
I think that i'm doing anithing wrong... because if i disable the data traffic my battery take arround two day's of phone live... but if i enable data it drains fastly...
.
zKernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- latest SE sources
- FPS cap removed
- overclocked
- added extra frequencies
- in-call volume increased
- TUN/TAP support (VPN)
- CIFS support
- debugging disabled for improved performance
- enabled ThumbEE CPU extension
Developers/Cooks: Feel free to use my kernel in your roms, but please, don't forget to mention which kernel is used and link to this thread
THis kernel is for xRecovery 0.3, I am not able to support other recoveries at this time!
Downloads:
zKernel-19082011-stock_kernel.zip
Cheers,
z
zdzihu said:
Hi guys,
This was requested by several people, but I wasn't really going to do this, knowing that 2.3.3 update was about to be released soon.
But since it's postponed to August, here it comes: zKernel for baseband 54+
Features:
- latest SE sources (2.1.A.0.492)
- FPS cap removed
- overclocked to 1.13GHz
- in-call volume increased
- full netfilter support (droid wall, wifi tether)
- drivemapper support (2.2+ native app2sd)
- working with basebands 54+ (67 recommended)
Developers/Cooks: Feel free to use my kernel in your roms, but please, don't forget to mention which kernel is used and link to this thread
Download:
This download is for stock 2.1 ROM only! If you're using custom ROM, please check with the relevant dev/cook!
zKernel 22062011.zip - update file for xRecovery 0.3
Sources may be downloaded from SE Dev page. Patches are available at FreeXperia Git.
Cheers,
z
Click to expand...
Click to collapse
Awsome zdzihu, thankyou for tireless hardwork you do for freexperia.
zdzihu said:
Hi guys,
This was requested by several people, but I wasn't really going to do this, knowing that 2.3.3 update was about to be released soon.
But since it's postponed to August, here it comes: zKernel for baseband 54+
Features:
- latest SE sources (2.1.A.0.492)
- FPS cap removed
- overclocked to 1.13GHz
- in-call volume increased
- full netfilter support (droid wall, wifi tether)
- drivemapper support (2.2+ native app2sd)
- working with basebands 54+ (67 recommended)
- no battery drain / sleep issues observed - 100% stock behaviour
Developers/Cooks: Feel free to use my kernel in your roms, but please, don't forget to mention which kernel is used and link to this thread
Download:
This download is for stock 2.1 ROM only! If you're using custom ROM, please check with the relevant dev/cook!
zKernel 22062011.zip - update file for xRecovery 0.3
Sources may be downloaded from SE Dev page. Patches are available at FreeXperia Git.
Cheers,
z
Click to expand...
Click to collapse
Hey zdzihu, what can I say about!? You are wonderful dude!
Thanks for this awesome news! Updating right now!
very good work z!
Finally!
I was wondering when it will be possible for higher basebands.
Dreams come truth.
Very many thanks Z! You've done a great job! Keep going! Thanks!
oh my goodness..this is what i waiting for..
How strict is that warning for 2.1 only.....
Before I go testing on 2.2 roms...is it destined to failure or does it just need testing by someone?
PS, great work!
YES!.67 is a huge improvemen tto .52 in performance and battery, thanks so much!
Does this work on Android 2.2.1?
Z, I tried to flash your kernel but no changes made on About Phone.
Going to try on TripNMiUI in a min and will edit this post
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
i cant believe this
gregbradley said:
How strict is that warning for 2.1 only.....
Before I go testing on 2.2 roms...is it destined to failure or does it just need testing by someone?
PS, great work!
Click to expand...
Click to collapse
You should really try it, I don't think Z has tested it. I guess that GPS and APP2SD will be broken with this kernel on 2.2.1 ROMs.
deleted...
gregbradley said:
How strict is that warning for 2.1 only.....
Before I go testing on 2.2 roms...is it destined to failure or does it just need testing by someone?
PS, great work!
Click to expand...
Click to collapse
100% bootloop / stuck on SE logo / all FC. You really need the ROM dev to adjust the ramdisk, this is how it works
azrull said:
Z, I tried to flash your kernel but no changes made on About Phone.
Click to expand...
Click to collapse
It didn't flash then. "About phone" should look as on the pictures attached. Are you sure you're on xRecovery 0.3?
Cheers,
z
how about your freex10 would it work on that? i have been using it for months and wouldn't like to go back to 2.1. but i might for this.
Sent from my X10i using XDA App
zdzihu said:
100% bootloop / stuck on SE logo / all FC. You really need the ROM dev to adjust the ramdisk, this is how it works
It didn't flash then. "About phone" should look as on the pictures attached. Are you sure you're on xRecovery 0.3?
Cheers,
z
Click to expand...
Click to collapse
Hey Z, when the ramdisk gets changed for froyo ROM's, will there be broken functions? Like a broken APP2SD en GPS?
Thanks,
PlayGunsta
bharadwaj1991 said:
how about your freex10 would it work on that? i have been using it for months and wouldn't like to go back to 2.1
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I will prepare update.zip when I'm back from holiday
PlayGunsta said:
Hey Z, when the ramdisk gets changed for froyo ROM's, will there be broken functions? Like a broken APP2SD en GPS?
Thanks,
PlayGunsta
Click to expand...
Click to collapse
I expect it to be fully working, just like stock kernel
Cheers,
z
bharadwaj1991 said:
how about your freex10 would it work on that? i have been using it for months and wouldn't like to go back to 2.1. but i might for this.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I think the answer is quite clear from Z.....
Custom kernel with OC and all these features + more -> HERE
---- OLD POST -----
Q. Who would benefit from this?
Those who want to stick to stock kernel for Official ICS (4.1.B.0.431), but would still want to get the benefits of custom kernel with init.d scripts, and native root access and many features like different cpu governors, io scheduler support, more filesystems support etc!
Q. Features?
init.d support
ro.secure=0 (that is now adb has native root access!)
Device is identified correctly (both Neo and Neo V) in recovery
ADB access in recovery
Clockworkmod 5.0.2.7 (credits DoomLord)
Governors: Smartassv2, Intellidemand and OndemandX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IO scheduler: sio added (default deadline)
Filesystems: isofs, ntfs, ext4 added
Network: VPN support (tun/tap driver)
USB OTG: USB OTG support (mass storage, hid, mouse, keyboard)
Enable only features you want!! (See instructions below)
userinit support
Download
super_stock_boot_v3.img <- NEO V
Many new modules integrated! (see new features above).
super_stock_boot_v3_NEO.img <- NEO only
Please see new install instructions!!
super_stock_boot_v2.img <- NEO V
super_stock_boot_v2_NEO.img <- NEO only
Without auto-root (autoroot may cause some problems on rooted ROMS)
Stock WiFi modules
Required by only those coming from Night-elf kernel, CWM flashable.
Q. How to install?
Just as you install a custom kernel.
Steps:
1. Power down device and get into FASTBOOT MODE -> switch off device hold menu key & plugin usb. (LED notification turns BLUE)
2. check fastboot with "fastboot devices"
3. flash boot image
fastboot flash boot boot.img
4. Reboot with "fastboot reboot"
5. Enjoy!
How to enable/disable features?
This kernel sets properties to features so that they can be enabled or disabled easily
Code:
shardul.module.intellidemand=1
shardul.module.ondemandx=0
shardul.module.smartassV2=0
shardul.module.sio=0
shardul.module.tun=0
shardul.module.usbstorage=1
shardul.module.isofs=0
shardul.module.ntfs=0
shardul.module.hid_apple=0
shardul.module.hid_microsoft=0
shardul.module.ext4=0
Method 1: Edit /data/local.prop directly
Method 2: "writeprop shardul.module.isofs 1" on shell / terminal emulator for individual properties set/unset
Module will be loaded on next boot!
If you want to load module only for the current session, see this app!
Want this on locked bootloader? : See here
Credits:
AnDyX, DooMLord and all devs on XDA
1st post! You're the best!
Sent from my Xperia Neo V using Tapatalk 2
wish they publish 4.0.4 source soon
@ shardul,
i have flashed the beta with Iscream 11 rom. everything looks good.
deepsleep, sd moumt with pc, etc. all well.
only i got different thing is phone vibrate two times while booting. once while transition between kernel logo to bootanimation, and second while end of boot as normal.
what has been fixed in beta 1a?
archijit said:
@ shardul,
i have flashed the beta with Iscream 11 rom. everything looks good.
deepsleep, sd moumt with pc, etc. all well.
only i got different thing is phone vibrate two times while booting. once while transition between kernel logo to bootanimation, and second while end of boot as normal.
what has been fixed in beta 1a?
Click to expand...
Click to collapse
1. The first vibrate is when it enters recovery (so that you dont have to watch for the blue light)
2. Beta 1a fixed busybox re-linking, so that now the latest busybox is seen by the system.
Maybe I should give it a try lol.
Shardul can you tell me what is good in this ? means better than previous versions? like better battery life? but auto root is COOL
darky22 said:
Shardul can you tell me what is good in this ? means better than previous versions? like better battery life? but auto root is COOL
Click to expand...
Click to collapse
1. Based on newer SONY kernel
2. CPU Governors smartass2, intellidemand and ondemandx
This kernel is exactly what l ve been looking for! It's great! Thanks!
Sent from my MT11i
i want to give it a try.. thanks shardul
wifi does not turning on
If you were on night-elf kernel, please restore stock wifi modules..
This kernel does not do it automatically now, because i don't want to restore same version modules for everyone..
For those coming from night-elf kernel, stock wifi modules added to OP
Will this work on any ROM? i mean currently i am using your boot_ICS_plus_v5 kernel which is fantastic, so if i flash this kernel (4.0.4) on miui 2.5.25..will i get WiFi? and sorry for being newbish but what's new in the sony's new 4.0.4 kernel and do we have to flash Sony's ROM to get the benefits?
Thanks for the kernel btw
Vabby said:
Will this work on any ROM? i mean currently i am using your boot_ICS_plus_v5 kernel which is fantastic, so if i flash this kernel (4.0.4) on miui 2.5.25..will i get WiFi? and sorry for being newbish but what's new in the sony's new 4.0.4 kernel and do we have to flash Sony's ROM to get the benefits?
Thanks for the kernel btw
Click to expand...
Click to collapse
No, you do not need to update, unless you want to have the new governors
No wifi problems though if you update.. But choose the lite version
Thanks, but what are the benefits of having new governors? and what has been added by sony in this kernel?
Updated to v2, with close to stock ramdisk!!
Should solve some problems faced by Neo users. Please test and report!
I am on stock rooted ICS 4.0.4 with your v5 kernel, if I flash this kernel, will my root remain? Because you said you removed auto-root, does that mean I will lose my root?
skyline159 said:
I am on stock rooted ICS 4.0.4 with your v5 kernel, if I flash this kernel, will my root remain? Because you said you removed auto-root, does that mean I will lose my root?
Click to expand...
Click to collapse
No, you will not lose root!
Can you add EXT2, EXT3, EXT4 support?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey Guys who wants to use the LuPuS kernel built with linaro for stock roms ??
You can find more about the kernel here
http://forum.xda-developers.com/showthread.php?t=1867265
A big thanks to wedgess for awesome kernel.
I actually have this kernel running on my mini pro
Want Proof ??
Here is screen shot
Guys If you want it, then I need some brave testers who are ready to get their device bricked.
Note: Testers are testing at their own risk. I am not responsible for any damages. I try my best to avoid any mistake from my side.
I will PM the kernel and wifi modules to the willing testers.
Here are few other Screenshots showing the included governors
nice job buddy.
but anyhow i'm not dumb to take such a risk
Edit: i was really shocked about the brick thing.
ok i'll try it.
Currently I am having only mini pro with me . Mini is with my friend who is not available. So I would be needing testers for LWW, Active and Mini
And the getting device bricked was a joke.
It won't brick your device. At the max it won't boot.
Edit: I have double checked the deconfigs so it won't brick your device.
I give it a try... :fingers-crossed:
I can test it on mini
Sent from my ST15i using xda premium
SirMatin said:
nice job buddy.
but anyhow i'm not dumb to take such a risk
Click to expand...
Click to collapse
You saying that The ones testing are dumb...
If you can't take some risks, you simply can't invent/discover something new
Flashing/testing a kernel isn't a big issue
I am ready to test the kernel on MINI if it supports CyanogenMod
Edit: oops... Just saw the Kernel thread mentioned it only supports stock ROM...
Don't have a stock based ROM right now...
But I, can test it after 2-3 days
PREDATOR95 said:
You saying that The ones testing are dumb...
If you can't take some risks, you simply can't invent/discover something new
Flashing/testing a kernel isn't a big issue
I am ready to test the kernel on MINI if it supports CyanogenMod
Edit: oops... Just saw the Kernel thread mentioned it only supports stock ROM...
Don't have a stock based ROM right now...
But I, can test it after 2-3 days
Click to expand...
Click to collapse
I will release the kernel tomorrow i.e 1st Jan
Need people to test before it.
@ Other testers
I will PM the kernel to you soon.
Agree with the above poster but u wont brick your device either way. It just wont boot.
He has my full support to also bring u all my cm10 & 9 kernel as well. I just dont have time as I also support PLAY, ARC & S, RAY and all NEO devices.
Sent from my GT-I9300 On Official JB
Testers please post the results here on this thread
I jst tested ta lupus kernel for LWW, its great awesome and really fast, WOW!
stanlin salu sent me these pics on the What's app
I still need the tester for Active and conformation by Mini testers
Then I am gonna make a new thread in Development Section
Phone: st15i_Xperia mini
Result:
Rom booted successfully
the performance is good and boot speed is normal.(not too long)
i tested the benchmark on 1.4 ghz u can see result in picture below.(Rom:Ultimate HD)
wifi works fine after flashing moduls
the cpu frequency will set on 1.6 ghz on every boot.it is not good
Just tested it on my LWW...like stanlin salu said...it awesome... :good:
scorpion 13 said:
Phone: st15i_Xperia mini
Result:
Rom booted successfully
the performance is good and boot speed is normal.(not too long)
i tested the benchmark on 1.4 ghz u can see result in picture below.(Rom:Ultimate HD)
wifi works fine after flashing moduls
the cpu frequency will set on 1.6 ghz on every boot.it is not good
Click to expand...
Click to collapse
Ya i know it sets the man to 1.6 gonna decrease it to 1ghz and then make final version
Thanks every one for testing
Just flashed my NEW 'JJHYBRID AOSP 1.0' and everything more than great !
Best kernel available for Mini (st15i)
I've tested LuPuS kernel on my st15i for several days. I've tested EVERY kernel available for Mini (except Radeon which I'm going to test soon). From my point of view (overclocking + decent battery drain) it's the BEST kernel till now. I'm running my Mini OC (1,4 GHz - superbad - sio) and with minimal use (average: 30 min calls + 60 min WiFi per day) battery easily lasts for 48 hours whereas with similar use and MESA v2.5 (my previous favorite) never lasted more than 40 hours. So, excellent job !:good:
Just migrated to lupus with serenity v3 ROM on Mini Pro
awesome performance. Smooth as hell, no lags so far. Let's see how long the battery lasts :fingers-crossed:
ctragas said:
I've tested LuPuS kernel on my st15i for several days. I've tested EVERY kernel available for Mini (except Radeon which I'm going to test soon). From my point of view (overclocking + decent battery drain) it's the BEST kernel till now. I'm running my Mini OC (1,4 GHz - superbad - sio) and with minimal use (average: 30 min calls + 60 min WiFi per day) battery easily lasts for 48 hours whereas with similar use and MESA v2.5 (my previous favorite) never lasted more than 40 hours. So, excellent job !:good:
Click to expand...
Click to collapse
Interesting.Keep us posted!
N.
Not Sent From My xPERIA ST15i.
Okay. Some of you may know from the ZCF threads that I had been working on a GB kernel for the ROM. So here it is. This is a collaboration between the ZCF ROM and my team.
If you're wondering why a new GB kernel with features from 2.6.32.6, here's my answer:
2.6.32.6 isn't perfect yet on GB. Although nAa has said he's working on a fully working version, I feel it's better to have a taste of what it would be like to have 2.6.32.6 on GB. Plus his kernel would be directed mostly towards JB users, but mine is only for GB (although it can be adapted for JB). Plus I ran into some problems with my last thread here, regarding placement of the thread. This does not fit in either of the General, Q/A and Troubleshooting or the Themes and Apps section. This is not in the Original Android Development section because this is not really original if you don't consider backporting or porting original. So this is in the Android Development section.
Features:
- nAa-GB kernel built with Codesourcery toolchain (going back to the roots).
- AHB overclocking backported from 2.6.32.6 (may drain battery, but it will definitely be worth it; ultra-smooth performance and I am not kidding about this).
- SLQB.
- SmartassH3 and Deadline included and set as default because they provide best performance despite stupid benchmark scores.
- WiFi modules from nAa-JB 2.6.29.6. Needed them as a solution, because the GB modules weren't building.
- FPS uncap (hardware vSync is turned off; software vSync is still enabled though).
- Synaptics DT/NoDT switch to enable/disable DT on synaptics panels.
- Frandom built-in to ease random generation yet using less of the kernel's entropy pool.
- VDD interface for undervolting.
Not working as of now (11-6-13):
- You tell me.
Installation:
1) If you're coming from a JB kernel or 2.6.32.6 kernel
- Perform a Nandroid backup. And if you're going to restore to JB, make sure to format /system, /data and /cache again before restoring.
- First format /system, /data and /cache from CWM recovery.
- Flash the kernel in Flashtool as you would normally.
2) If you're coming from a GB kernel
- Perform a Nandroid backup in CWM
- Flash the kernel in Flashtool as you would normally.
Download:
V1 - http://d-h.st/hX1
V2 - http://d-h.st/2or
V3 - http://d-h.st/O7u
MIRROR for V3 - http://www.mediafire.com/?7hfzb13ibstr5iq
Thank @CnC-ROCK for that.
Source:
https://github.com/souljaboy11792/ZCF-kernel
A little bit messed up right now, but I am working on fixing it. Please be patient.
Credits:
Allah Almighty
My family
nAa
The entire CM team
Regnarts blogspot for some ideas
Pisculishi and the entire ZCF team
pilu1978 and all others who helped me along
Team Oxydo for being just the best friends
Sony Ericsson
Me
Please don't spam the thread or my inbox. If you have a question or would like to do something, please do it in the thread as that makes it easier for me and others to understand your problem. Also let me remind you that I shall not pay any heed to haters.
Bug-hunting and fixing
1. 806MHz is repeated in the frequency list. This is not really a bug at all, just a slight glitch. The first and second frequency differ in some clock rates. I recommend the second one although both will work.
2. WiFi doesn't work on some ROMs because they use a different modules path. Easy fix is to copy the modules over to these directories and insmod them. Or for a permanent fix, help me create a list of ROMs that have such paths and their respective paths.
SDE - /system/modules
All ROMs based on SDE - /system/modules
I need something all these ROMs have in common that cannot be found on any other ROM. That will be a check for module-copying at boot. Need your help, guys.
3. Doesn't work on @tiestobunio's ROMs. I haven't tested any of his/her ROMs. And someone mentioned it didn't work for him. I honestly don't see why. Haven't tweaked anything in the ramdisk that may possibly cause this.
Changelog:
9-6-13
- Initial release
- AHB OC from 2.6.32.6
- SLQB slab allocator used instead of SLAB
- FPS-Uncap (hw vSync = OFF)
- Several other minor changes.
10-6-13
- Added the Synaptics DT/NoDT switch
- Frandom built-in.
- Undervolt module added. This fixes undervolting for now. But I'd still like to have the VDD interface. Apparently that didn't work out. But read on.
11-6-13
- Fixed the VDD interface. Tick Undervolting and use this interface.
- Removed Undervolting module because VDD interface is functional now.
Wishlist
- Integrate TWRP.
- Include BFS scheduler.
- You tell me!
And Finally perfect kernel. Rock on !!!
Code:
[SIZE="4"][FONT="Arial Black"]Note : Wi-Fi Patch[/FONT][/SIZE]
Info : Some users are experiencing the problem of the wireless network. solution for
1 :[URL="http://www.mediafire.com/?cb04de5cfw2ohe9"]Download to oxydo-zcf wi-fi patch[/URL]
2 : Flash the patch
3 : Restart
Note : If you found bug for wifi ,
Need to : 1 - Flash the oxydo-zcf kernel
2- Full wipe cache and data factory
3- Flash the (zcfrom)rom.zip
Click to expand...
Click to collapse
Some Ss :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers / Thanks sgt.meow
Pisculishi
I have 2 questions..
1. Only for zcf or can be used on other gb roms too?
2. TWRP just like oxydo JB or CWM?
thanks.
Sent from my E15i using Tapatalk 2
Haven't included TWRP yet. Last time I tried it broke sdcard But I plan to include TWRP soon.
This should be usable with all GB ROMs. After all, a GB ramdisk has been used. So no worries.
nice kernel you got there meow and pisculshi
Pisculishi said:
And Finally perfect kernel. Rock on !!!
We will ss for kernel performance and logo.
Some :
Cheers / Thanks sgt.meow
Pisculishi
Click to expand...
Click to collapse
will this kernel be available also for x10 mini pro?
Thanks @feherneoh
Major derp there! We all need a "correct-it" guy some times.
@MassStarvation @feherneoh @Gogeta
The VDD level interface is supposed to be similar to nAa's .32. Can you guys check and see if it works, please?
@isko95
Not yet is what I can say for now. Simply because I don't have the device. And testing over the internet can be quite a pain. But I'll try my best.
feherneoh said:
I hate being the 'correct it' guy, but I can't understand this:
Why would we create a nandroid backup AFTER formatting all of the partitions?
Sent from my Htc Hd2 using xda app-developers app
Click to expand...
Click to collapse
because we want a empty ZIP so we can zip it and be zippers...........
sgt head over to OT i have asked some Qs.
sgt. meow said:
@isko95
Not yet is what I can say for now. Simply because I don't have the device. And testing over the internet can be quite a pain. But I'll try my best.
Click to expand...
Click to collapse
if you share a link in the x10 mini pro, i think there will be a lot of testers, since it is a new kernel...
@Sgt.meow, I'll test it right after I arrive at home, I'm at the city now shopping some stuffs
@isko95
I'll keep that in mind. But last time I tried doing it for X10 mini/mini pro, the testing ended up being crap! Mostly because of slow uploads and connection breakdowns.
Okay. VDD levels needs some work. It doesn't work for now.
CnC-ROCK said:
because we want a empty ZIP so we can zip it and be zippers...........
sgt head over to OT i have asked some Qs.
Click to expand...
Click to collapse
no, just no CnC for your reputation's sake
everythings working fine, thanks sgt. meow
but kernel is unstable i guess.
it did hang my phone twice.i had to remove battery. i am using primeHD. no overclocking.
@mayurcools
Haven't had any such thing on my phone. Running it OC'ed to 787MHz for about 3-4 hours. Perhaps if it reboots again (I hope it doesn't) you can send me the last_kmsg and the dmesg.
mayurcools said:
everythings working fine, thanks sgt. meow
but kernel is unstable i guess.
it did hang my phone twice.i had to remove battery. i am using primeHD. no overclocking.
Click to expand...
Click to collapse
did you performed the steps in the OP? if so, maybe the kernel is really unstable, please wait further because this kernel is new and fresh and expect many bugs from it and sgt.meow is doing what he can to provide us the kernel we want :good:
---------- Post added at 05:52 PM ---------- Previous post was at 05:51 PM ----------
@mayurcools or maybe the problem is that you install too much apps and bloated your system?
tested on GDX31b, so far so good. it's fast n smooth.
NIce
SmartassH3 and Deadline on GB!!
Using on SDE 2.0..so far so good except it hangs if i try to install Kickass Kernelizer o;