Related
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
I would get nvflash set up with bekit's images and flash that to get yourself back to a working stock image. Follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=861950
After that, put Clockworkmod ( v .8, get it from development forum) on it and repartition your sdcard to 2048 and 0 then you should be ready to flash.
Then get a ROM from the development forum here, there are some based off cm7 (gingerbread builds).
I was hoping not to have to use NVflash cuz people report problems with the boot loop, however I havent found any other option so far so I guess i'm trying that. Thanks for the link.
Xxlgeek,
Every time I hear boot loop I think re-partition -- because most of the time that
seems to fix the problem.
I agree you should NVFlash to get a stock version working. Then install CWM so
you can partition -- and the do the Fix Permissions, Wipe Dalvik Cache, Wipe
Cache, Wipe Factory Data.
With that I would try to wind up with a stock machine and let it OTA up to 3588.
I wouldn't load another Alternate Rom until I knew my tablet is working good and
until I know a lot more about the roms and how to work with the G-Tablet.
IMHO.
Rev
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Xxlgeek,
If it didn't work, I would erase the Cyanogenmod 7 file -- and I would go back to a stock rom until I could make sure all the hardware is working right and the system
is stable.
When you know the tablet is good and stable, you can always download and re-do.
Rev
Xxlgeek said:
Hey xda forums, first time poster, long time reader. I rooted my Nook color from these forums and find them to be most informative. I just got back from hiking the Grand Canyon to find my G Tablet waiting for me from Woot.
As I did with my Nook, I immediately started to replace the stock rom with Cyanogenmod 7 beta. I followed the instructions on the Wiki, including installing Gapps, by putting them on the internal SD and using CWM to install from zip. After everything was done however I am now stuck at the Viewsonic splash screen. I tried to read thru the Googles and tried reflashing back to stock by way of some instructions on DroidPirate I think it was, to no avail. I can't even see my external SD card to load the update to recover. Please help. Anyone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1021978
you are not alone...
it may have to do with the boot loader .... further investigation needed. CW does not replace this but the stock does I have been running the old one since december on my personal tab. but most of these woot pads are updated .... hmmmmmm
Xxlgeek said:
I can actually boot into CWM right now. I already repartitioned and wiped all the caches. But when I try to flash Cyanogenmod 7 again, which is on the root of the internal memory, it just does the same thing, won't load past splash screen.
Click to expand...
Click to collapse
Which version of CM7 are you running?
jivy26 said:
Which version of CM7 are you running?
Click to expand...
Click to collapse
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Just throwing this out there. I bought 2 from Woot myself. On my first G-Tab I had the same issue with every single ROM I tried. I finally used NVFlash to go back to stock and everything was good again. I then flashed to the G-Harmony Gingerbread ROM and it worked and still runs like a CHAMP. Now, I finally get the other G-Tab out and start to go through the same routine as the first and it's been a no go repeatedly. I have mostly been trying with the Cyanogen 7 Final ROM to no avail and even with the G-Harmony. Going to try NVFlash on number 2 tab and see what the result is and will post back in a bit with updates.
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
tunez23 said:
Ok, I said I would reply and here it is. The downside is this.... The NVFlash worked great and put me back to stock. The bad part is that I am not sure that was what actually caused the problem to occur in the first place on the second tablet. I had read right before doing this that installing the Clockwork mod from the SD card instead can be a fix as well. I did that this time through. It also shows something different on the screen when you hold down the start and vol+ buttons than it was when CWM was installed wrong.
So basically this:
Run NV Flash (Detailed here: http://forum.xda-developers.com/showthread.php?t=861950 )
Run Clockwork Mod FROM THE SD CARD!!! (Detailed here: http://forum.xda-developers.com/showthread.php?t=865245 )
Then proceed to follow those exact instructions from the same thread.
Do not skip stuff, do not think you have a better path, just do it all as described. I now have a G-Tablet running the Cyanogen Mod 7 Final release SMOOTH as glass! Hope this helps someone else out.
Click to expand...
Click to collapse
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Did you extract both archives to the same directory on your computer?
akodoreign said:
doesnt matter all the gbread roms do this when the error happens. thats why i am starting to think its the bootloader
Click to expand...
Click to collapse
2 partitions are reversed and Gingerbread roms don't like it. Using bekits original nvflash files will fix the partitioning permanently as far as flashing between froyo and gingerbread.
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Edit.....This is not all tablets. I'm guessing around 30% or so have the 2 reversed partitions but it seems 50% of the woot tabs. Helped fix many of these on irc in the last 2 weeks
KrazyOne7 said:
I too am having the same problem but when I try to run NVFlash, I get the error "nvflash configuration file error: file not found Press enter to continue:"
The tablet doesn't restart or anything. I followed the steps to re-partition and install the ROM from "http://forum.xda-developers.com/showthread.php?t=865245." After that didn't work, I tried the steps from "http://forum.xda-developers.com/showthread.php?t=861950" and I get stuck at running the nvflash_gtablet.bat file.
Any help would be appreciated.
Click to expand...
Click to collapse
Having the same problem too!! Any help would be much appreciated.
Tried wiping everything with FORMAT.zip from another thread, and get and error for unknown device when running that *.bat file.
This newbie needs some serious help!
Locked bootloader??!
thebadfrog said:
Any official updates from viewsonic past 3588 have a locked bootloader and require viewsonics kernel so you must use Gojimis fix or nvflash to go back.
Click to expand...
Click to collapse
I think I must have the locked bootloader, but tried both Gojimis's fix and nvflash fix and get the error as mentioned above.
So I am getting nowhere, won't go past the "booting..." splash screen to install any of the update.zip files from the microSD card.
Help!
K J Rad said:
Did you extract both archives to the same directory on your computer?
Click to expand...
Click to collapse
Yes, I extracted both the gtablet and the windows zip files.
KrazyOne7 said:
Yes, I extracted both the gtablet and the windows zip files.
Click to expand...
Click to collapse
Me too, and still getting the error "nvflash configuration file error: file not found Press enter to continue:"
Are they in the same directory. If they are not then nvflash can not find the files to flash. Both zips have to be unzipped in the same directory and the driver has to work. You must be able to see the tablet from the computer when you boot into apx mode. APX mode is power/vol- NOT power/vol+
So I am just about at my wits end. I am fairly computer literate but an absolute noob when it comes to my gtab and flashing it.
I’ll try and give a step by step.
1. Got my Gtab today. I was sooooo excited!
2. Installed CWM and the latest TNT lite ROM.
3. All is well everything worked great.
4. Started up Android market…all hell starts breaking loose with “forced closes”.
5. Ok…so I shut down and restart
6. It starts what I have learned is called a “boot loop” going from the birds to the “G Tablet” screen to black to the birds…
7. I try to reflash TNT…nothin’.
8. I try NVflash, it *says* it completed successfully, but stays in the boot loop.
9. I’ve tried copying the CWM onto the microsd card (yes, command is pointing to the micro card). I then go through the Hold down the plus and start.
10. CWM *seems* to install, then HEY…right back into the boot loop.
11. I try something else and get (in little red text in the top left corner of the screen) something about “Magic” something missing.
Does anybody have any suggestions? I am a smart guy…I can read. The thing is, is that it seems like the mods and the CWM’s are completing successfully, but then I am right back in the flippin’ boot loop. I am afraid I’ve just wasted $300.
Sorry to be the dumb noob.
Pat
Did you change the partition when you installed the new rom? That was what fixed mine.
No...none of the instructions I saw mentioned that. Now I am seeing using CWM to do it but the problem is I can't get CWM to load!
if CWM is installed, you just need to hold V+ and power button when restarting. if not (and this happened to me) you should follow the instructions that were given to me by regalpimpin on this thread http://forum.xda-developers.com/showthread.php?t=1025128 to install CWM, and re partition (you will loose all the data on your internal SD card so be sure to back up) but repartition at 2048 and 0 unless the ROM specifically asks for a different partition.
You need to nvflash if you are getting the magic value mismatch. You could have gotten out of the boot loop originally by repartitioning. Only use bekit 0.8 recovery as any others will bork your tab. Dont use rom manager either.
mocheesehead,
First don't panic. We can fix this. It's REALLY hard to brick
a G-Tablet!
You have done all the right things from what you have written.
As Lisa said the one thing you haven't done is re-partition and
it seems that re-partitioning fixes boot loops most of the time.
Double check. Use your microSD with the CWM update.zip on it.
Since the command file is erased when you use it, you will need
to copy a new copy of the command file edited for /SDCARD2 back
into the recovery folder. Boot into recovery with power/volume +.
When all is finished shut down properly. The reboot as above and
see if you get CWM.
If you don't, you will have to try to load CWM by nvflash. If you
will try the above again, I will see if I can find directions for CWM
by nvflash. I know the process but will have to find the correct
command line.
*************
Just in case CWM loads: I will go ahead put the fix process here:
1. When CWM starts, go to the Advanced Menu and run the
Partition SDCARD, Fix Permissions, and Wipe Dalvik Cache options.
The re-partition takes a few minutes so
don't panic! Then go back to the Main Menu and Wipe Cache
and Wipe/Reset Factory Settings.
2. Once that is done, reboot and hopefully you will be fixed.
3. If not fixed, nvflash back to stock as per the thread:
http://forum.xda-developers.com/showthread.php?t=861950
Makes everything -- especially the files to load -- is correct.
Keep us posted on how you do. Meanwhile I will look for the
other procedure and post it.
Rev
Hi Lisa! Yes! That sounds like my problem. I'll give it a go.
Quick question...is there a preferred format (ie, FAT32, etc) for the micro SD card?
I'll let you know how it turns out!
Thanks...Pat
Pat,
Read this thread. This person had about the same kind of situation
you do and had to nvflash to load CWM.
http://forum.xda-developers.com/showthread.php?t=1026757
Rev
butchconner said:
Pat,
Read this thread. This person had about the same kind of situation
you do and had to nvflash to load CWM.
http://forum.xda-developers.com/showthread.php?t=1026757
Rev
Click to expand...
Click to collapse
Hey cheesehead! Absolutely follow Rev's advise! I was the Guy in the thread he references above. The fix worked like a champ.
You will get it fixed, just as I did. Same issue.
Mark
Thanks to everyone for the kind and informative responses. I probably won't get to a fix til Monday morning I as I have a soccer tourney (kids) all weekend, but I'll report back when I know something!
Thanks again,
Pat
As everybody said, it is almost brick proof, as long as you follow the correct procedures. Some people don't seem to understand missing one step can make things worse. Most of these post give you step by step instructions and by finding the right one to read you can't go wrong. I'm sure you will eventually have it worked out, learning what does what and why you did that will be a big help in the long run.
Ok! So I think I am breathing again! I partitioned the card and got back to the stock UI...man...it does really blow! So, a couple of questions...
1. I flashed TNT lite, and had force close issues. Would you recommend Vegan?
2. Now that I partitioned the card 2048 and 0 like everyone said, do I need to do this again before or after I flash a new rom?
Again, thanks for everyone's kind responses!
Pat
Glad to hear you made back to stock. Here in a bit I will write a step by step how to upgrade to TNTL 4.40 for you if some one doesn't beat me to it.
Thanks JH! I look forward to giving it another go! I appreciate your help!
Pat
Pat,
Remember that the bekit 1105 is about the oldest stock UI that exists!!! Most of us
started with 2967 on our first G-Tablets.
It WAS bad and there was no Flash and no replacement kernal and TnT was at about 2.x and VEGAn was at about .beta 3.
On the other hand, we didn't miss a lot of it because we were trying to keep them
running and find out what they would do and find apps we liked!!!
When I run the latest software I just can't believe how lucky we are.....IMHO.
Rev
This is my first experience trying to mod a device but everything I read said it was easy so I bought the Gtab and spent 4 hours yesterday trying to flash VEGAn-TAB GingerEdition STABLE RC1 but it won't boot.
The first thing I did was root the device following instructions from driod pirate (before I found XDA). I now know I didn't need to do that step.
After rooting it, I found this post with great step by step instructions for installing clockworkmod and flashing a rom. I followed the instructions to install ClockwordMod and the VEGAn-TAB GingerEdition rom. After trying to boot, it stuck on the ViewSonic splash screen.
I did some more research and thought I might need to downgrade the bootloader/tnt version so I followed these instructions and was able to successfully load the stock rom. I then followed the same steps above to install clockworkmod and flash the vegan rom. Again, when trying to boot, it just sticks on the ViewSonic splash screen.
Any ideas what I might be doing wrong?
Do I need to do a nvflash and try the process from the beginning again?
dw21 said:
This is my first experience trying to mod a device but everything I read said it was easy so I bought the Gtab and spent 4 hours yesterday trying to flash VEGAn-TAB GingerEdition STABLE RC1 but it won't boot.
The first thing I did was root the device following instructions from driod pirate (before I found XDA). I now know I didn't need to do that step.
After rooting it, I found this post with great step by step instructions for installing clockworkmod and flashing a rom. I followed the instructions to install ClockwordMod and the VEGAn-TAB GingerEdition rom. After trying to boot, it stuck on the ViewSonic splash screen.
I did some more research and thought I might need to downgrade the bootloader/tnt version so I followed these instructions and was able to successfully load the stock rom. I then followed the same steps above to install clockworkmod and flash the vegan rom. Again, when trying to boot, it just sticks on the ViewSonic splash screen.
Any ideas what I might be doing wrong?
Do I need to do a nvflash and try the process from the beginning again?
Click to expand...
Click to collapse
You need to follow the nvflash instructions on the developer page. Your partitions need to be fixed before gb roms will work
I suggest the first thing you do is setup nvFlash. I can assure you that you will need to use this utility at some point. It is very usefull and powerfully utility and is very easy to setup and use. http://forum.xda-developers.com/showthread.php?t=861950
once you set that up..i suggest you start from scratch.
So this is what I would do if i was in your shoes.
1. Install nvFlash and go back to stock.
2. Update to 3588 using OTA
3. Install cwm .8 on your tablet
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
6. Mount your tablet using cwm .8 and upload the rom you want to install
7. Install the rom you want and you should be good to go
(dont forget to reboot your device after that first boot.)
What is the risk involved with NVFlash? I've read a few complaints that their devices were bricked after nvflash. How do I make sure I avoid that happening?
dw21 said:
What is the risk involved with NVFlash? I've read a few complaints that their devices were bricked after nvflash. How do I make sure I avoid that happening?
Click to expand...
Click to collapse
Anytime you brick it, you can use nvFlash to un-brick it. Its just a matter of knowing what you are doing and reflashing it with the correct files. From what I have experienced, its pretty much impossible to brick these tablets once you have nvFlash setup. No matter how bad that situation is, I have always been able to recover using nvFlash(and I have been in very terrible situtations where I got a blank screen when i booted...turns out I was stuck in apx mode when i booted)
rbansal2 said:
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
Click to expand...
Click to collapse
Can you go into more details on these two steps? I know it's done with cwm but I want to make sure I do it exactly right.
worked for me
Thanks guys this worked great! For some reason I couldn't upgrade to 3588 it would FC at 50% but it works now!
clayvikings said:
Thanks guys this worked great! For some reason I couldn't upgrade to 3588 it would FC at 50% but it works now!
Click to expand...
Click to collapse
Awesome, that's great news! Welcome to the club!
rbansal2 said:
I suggest the first thing you do is setup nvFlash. I can assure you that you will need to use this utility at some point. It is very usefull and powerfully utility and is very easy to setup and use. http://forum.xda-developers.com/showthread.php?t=861950
once you set that up..i suggest you start from scratch.
So this is what I would do if i was in your shoes.
1. Install nvFlash and go back to stock.
2. Update to 3588 using OTA
3. Install cwm .8 on your tablet
4. Repartition to 2mb/0 using cwm .8
5. Wipe data, clear cache, clear dalvik using cwm .8
6. Mount your tablet using cwm .8 and upload the rom you want to install
7. Install the rom you want and you should be good to go
(dont forget to reboot your device after that first boot.)
Click to expand...
Click to collapse
I did exactly this (minus step 1. as it was already a stock device) and I had exactly the same problem - gtab stuck at viewsonic splash screen. My unit was fresh outta the box and fully charged, and this was the firstht hing I tried to do with it. CWM installed without a hitch (yes, 0.8) and I repartitioned without fear (I had no data on it anyway). Did the wipes, mounted the tab and copied over the rom... all instructions I found on XDA for doing it. It still sticks at the splash screen.
So, to get a working tablet again, I used nvflash to go back to stock (though I have a superuser app now, which is odd for 'stock'), did the ota update to 3588, loaded Spark+ on it for a launcher and add the amazon marketplace app (looking for more free apps).
I still want to get VEGAn installed though, just wish I new why it was freezing up/not booting/not correctly installing or whatever the problem is.
If you have run nvflash you can now install Gingerbread roms as it fixed your partitioning. When you got stuck on the vs birds it meant your partitioning was wrong and you needed to nflash. If you did then your fine now.
The nvflash provided does not bring you to complete stock. If you want complete stock just flash the 3588 update.
I did the exact same thing you did, with the same result. Then I nvflashed and walked through the rest of the steps and I was quickly able to flash VEGAn-TAB.
dw21 said:
I did the exact same thing you did, with the same result. Then I nvflashed and walked through the rest of the steps and I was quickly able to flash VEGAn-TAB.
Click to expand...
Click to collapse
I've been watching the VEGAn-TAB logo flash and pulse at me for the past hour. Think I'm going to try to flash the ROM again...
EDIT:
Scratch that. restarted into cwm, cleared user data again, booted right into V. Going through setup screens now. Question though... If this was writtne for the G-Tab, then why does it still have the phone stuff in it?
was working but now it isn't?
++++i had to use nvflash for my gtab and it worked. I loaded vegan-tab 7.0 GE and it took "literally HOURS" to boot to the tablet setup page, after that it was working great until I rebooted it after 1 day of use and now i can't get past the "powered by g-tabdevs" boot page?????? any thoughts?++++
UPDATE: I repartitioned the sd card 2048/0 and that didn't work, then i cleared the dalvik (?) cache and the other cache and it booted up successfully (warning to newbs like me, this did clear all my data so back up everything)
SIDE NOTE: I love this website!!!
Two things I always do before I decide to try a new ROM, backup anything I don't want to lose, then go do a factory reset. When you install a new ROM, it doesn't automatically wipes all the partitions, especially the user data and settings. By leaving that there, you are allowing the ROM have access to that information which in turn, can cause problems because not every ROM setups the same. I have seen many people run into problems because they don't do a data wipe. If you do this, you will see a lot less problems in the future and if you do get a new install running but seeing FCs with a lot of apps, do a factory reset.
VEGAn-TAB GingerEdition STABLE RC1 Still In Boot Loop
Hi, I've tried doing as per what the instructions said about clearing the cashes and partition SD card sizing. I've load VEGAn-Tab 6 times already and everytime I still end up with a boot loop error. I just decided to use tntlite instead, but I really want to get this working. I noticed one thing as I was loading tntlite and the stock rom that when I go back to ClockworkMod v08 to mount “/system” and “/data”.
I see the following:
“unmount/system”
and,
“unmount/data”
which is right, but when after I load VEGAn-Tab
I see the following:
“mount/system”
and,
“unmount/data”
From what I've been reading this should not be the case. I'm not sure it this is related to my problem with the boot loop or not.
Please help!
This has been the most frustrating experience I have ever had with an Android device...
I was one of the lucky few who got one for $280 on Amazon and apparently it had the newest build on it that has the boot loader locked down.
I went through all the stickied guides, warnings about the locked bootloader and NVFlash. Needless to say, I have done my homework.
I tried in vain to install any ROM, but the only one that would install is TnT, which to the dev's credit it was a huge step above the stock ROM, but *shudder* that interface...
Long story, short; I managed to install CWM, fail at any install of a ROM (3 bird screen) and and ended up flashing with NVFlash to 1.0-2638, tried to flash ROM's again and again only to reflash 2638. It has been a LOOOOONG day with this thing.
I am at my wit's end.
Here is what I have 1.0-2638, no CWM and a bottle of Patron Silver...
How do I get a ROM on here...
Hey
Compusearch said:
This has been the most frustrating experience I have ever had with an Android device...
I was one of the lucky few who got one for $280 on Amazon and apparently it had the newest build on it that has the boot loader locked down.
I went through all the stickied guides, warnings about the locked bootloader and NVFlash. Needless to say, I have done my homework.
I tried in vain to install any ROM, but the only one that would install is TnT, which to the dev's credit it was a huge step above the stock ROM, but *shudder* that interface...
Long story, short; I managed to install CWM, fail at any install of a ROM (3 bird screen) and and ended up flashing with NVFlash to 1.0-2638, tried to flash ROM's again and again only to reflash 2638. It has been a LOOOOONG day with this thing.
I am at my wit's end.
Here is what I have 1.0-2638, no CWM and a bottle of Patron Silver...
How do I get a ROM on here...
Click to expand...
Click to collapse
Thats sucks, and i feel for you. I am also someone that just purchased the gtablet from amazon, and have been reading the forums throughly and it clearly says to downgrade before attempting to load cwm and flashing a given rom. So i guess my question is, did you downgrade before flashing?
@Compusearch... welcome to the G-Tablet world...
before you go ahead... look though the forum and FAQ posts...
do you have a particular ROM in mind??
keep these in mind...
if you install the latest 1.2-4329 ROM, you cannot install a custom kernel... so most custom ROMs like CM will not work... there are three 1.2 based custom ROM available (can't post the links so google Century Eyes or Mountain Laurel)
if you install a Gingerbread ROM like CM7, hardware video decoding will not work...
a start up from where you are... get the 1.1-3588 ROM from http://forum.xda-developers.com/showthread.php?t=842000 and flash it with the stock recovery... it's the best base ROM... then you can flash CWM 0.8 bekit if you want to install a 1.1-based ROM (most ROMs available here) or move to 1.2-4329 and install a 1.2 based custom ROM...
you can easily nvFlash back to the 1.1 based ROM even after you move to a 1.2 based ROM...
craigacgomez said:
@Compusearch... welcome to the G-Tablet world...
before you go ahead... look though the forum and FAQ posts...
do you have a particular ROM in mind??
keep these in mind...
if you install the latest 1.2-4329 ROM, you cannot install a custom kernel... so most custom ROMs like CM will not work... there are three 1.2 based custom ROM available (can't post the links so google Century Eyes or Mountain Laurel)
if you install a Gingerbread ROM like CM7, hardware video decoding will not work...
a start up from where you are... get the 1.1-3588 ROM from http://forum.xda-developers.com/showthread.php?t=842000 and flash it with the stock recovery... it's the best base ROM... then you can flash CWM 0.8 bekit if you want to install a 1.1-based ROM (most ROMs available here) or move to 1.2-4329 and install a 1.2 based custom ROM...
you can easily nvFlash back to the 1.1 based ROM even after you move to a 1.2 based ROM...
Click to expand...
Click to collapse
Trust me, I went through all the FAQ's and Guides here. I even found a bunch of youtube video's showing how to do the installs of CWM and ROM's. I can follow along, but the end result is always the 3-bird boot screen.
I am seasoned veteran of installing ROM's: Droid, DroidX, Nook (too easy), Galaxy Tab, Captivate, HD2 (winmo7, android), MyTouch3G, and HTC Inspire. I know the procedures and concepts very well.
I think the variable that is screwing me over, is what was initially installed on my gTablet when I got it this week.
I assumed that I had 4349 as there was no available update when I checked for it over wifi. With that in mind, I did downgrade it to 3588 per:
http://forum.xda-developers.com/showthread.php?t=1036956
Even with that, I could not install any ROM's other than TnT Lite.
I am wondering of the latest batches of gTablets are locked down beyond what the newest update 4349+ already does.
Technically as it stands, I have 1.0-2638 installed and that should have the unlocked bootloader and I should be able to follow this guide:
http://forum.xda-developers.com/showthread.php?t=865245
I would assume that logically, if I have an earlier version of the original TnT, that I can install CWM and then any gTablet ROM.
Am I wrong to assume this?
[edit] I want to be able to use the Vegan Beta 5.1.1 ROM
Stupid question but have you actually tried to install a rom after nflashing. The problem you were having before was the partition structure was wrong and nvflash should have fixed that. You can also extract "recovery.img" from bekit 0.8 zip file......
Copy recovery.img to your nvflash directory
Rename part9.img to part9.bak
Rename recovery.img to part9.img
Run nvflash again
This will flash cwm for you. Then try clearing data and flashing anather rom
Compusearch said:
Trust me, I went through all the FAQ's and Guides here. I even found a bunch of youtube video's showing how to do the installs of CWM and ROM's. I can follow along, but the end result is always the 3-bird boot screen.
I am seasoned veteran of installing ROM's: Droid, DroidX, Nook (too easy), Galaxy Tab, Captivate, HD2 (winmo7, android), MyTouch3G, and HTC Inspire. I know the procedures and concepts very well.
I think the variable that is screwing me over, is what was initially installed on my gTablet when I got it this week.
I assumed that I had 4349 as there was no available update when I checked for it over wifi. With that in mind, I did downgrade it to 3588 per:
http://forum.xda-developers.com/showthread.php?t=1036956
Even with that, I could not install any ROM's other than TnT Lite.
I am wondering of the latest batches of gTablets are locked down beyond what the newest update 4349+ already does.
Technically as it stands, I have 1.0-2638 installed and that should have the unlocked bootloader and I should be able to follow this guide:
http://forum.xda-developers.com/showthread.php?t=865245
I would assume that logically, if I have an earlier version of the original TnT, that I can install CWM and then any gTablet ROM.
Am I wrong to assume this?
[edit] I want to be able to use the Vegan Beta 5.1.1 ROM
Click to expand...
Click to collapse
nvFlashing back to the 1.0 release will definitely downgrade your bootloader... and then I recommend upgrading to the 1.1 branch (3588)... install CWM using the stock recovery or using nvFlash (as @thebadfrog said)...
Format all partitions using CWM... and even try re-partitioning the internal SD card using CWM to 2048MB ext, 0MB swap... and then install a custom ROM
craigacgomez said:
nvFlashing back to the 1.0 release will definitely downgrade your bootloader... and then I recommend upgrading to the 1.1 branch (3588)... install CWM using the stock recovery or using nvFlash (as @thebadfrog said)...
Format all partitions using CWM... and even try re-partitioning the internal SD card using CWM to 2048MB ext, 0MB swap... and then install a custom ROM
Click to expand...
Click to collapse
Trying that now:
1. upgrade to 3588 -Done!
2. install CWM -Done!
3. re-partition SD 2048/0M -Done!
Wipe Dalvik Cache -Done, but with error "Can't Mount /dev/block/mmcblk0p2"
Wipe data/factory reset -Done!
Wipe cache partition -Done!
Format SYSTEM -Done!
Format DATA -Done!
Format CACHE -Done!
Format SDCARD -Done!
4. Custom ROM - VEGAn-TAB GingerEdition STABLE RC1 - INSTALLED!!!
Thanks, Craig and Frog for the tips. This really should be added to the current FAQ.
Sadly, now that I can actually use the tablet, I am HATING the view angles on it.
For a company that prodomiately makes nice monitors and LCD's this is some BS right here.
I know that ViewSonic slapped their name on it, but seriously, who over at VS said that the screen was great and ready for production?
Yeah, the viewing angles aren't great... but it's perfect for a traveller like me... I can sit on the plane and use my tablet without anyone seeing what I'm doing!!
And ignore the dalvik wipe error!!
I wish more people would look at repartitioning as a "step" during the flashing process as apposed to a maybe. All the roms and recovery images are built off of one specific partition set and it is in my book a necessary step to make sure we are all on the same page.
Glad you got it sorted
Mantara said:
I wish more people would look at repartitioning as a "step" during the flashing process as apposed to a maybe. All the roms and recovery images are built off of one specific partition set and it is in my book a necessary step to make sure we are all on the same page.
Glad you got it sorted
Click to expand...
Click to collapse
We have debated that for several months since discovering the different partitioning. The only real way to "brick" for real is through a bad nvflash therefore it makes since to skip that step until necessary.
I think all roms should be nvflashed anyway so you have to understand and be able to use the recovery tools to even modify your tab. But thats my own opinion
Hi,
i just got my G tablet recently and I decided to install Clockworkmod and TNT Lite.I followed instructions to install Clockworkmod using the a USB cable and it worked perfectly.I installed v3.0.2.8.Then, I downloaded TNTLite and moved the update.zip file to the root.When I did that, the only option to put it on the root was to replace the update.zip file from Clockworkmod with the new file from TNTLite.I went ahead and installed TNTLite and installed pefectly.I booted the tablet but it got stucked on the splash page with the Viewsonic logo.I don`t know what I did next but now every time i boot it goes straight into Clockwordmod.I reboot and doesd the same thing.When the splash page appears, in the top left corner it says:booting recovery kernel image.
Can anyone help me?
There are a couple of issues here.
First of all you need to determine which bootloader your gtab is on. There is a sticky which will help you with the whole bootloader issue. You are likely on 1.1, which is incompatible with the version of clockwork you loaded. You need clockwork .08 for the 1.1 bootloader. v3.0.2.8 only works with the 1.2 boot loader.
TNT lite has been retired, and although it is a solid ROM, it isn't being actively developed. The active "version" of TNT lite is hosted on slatedroid and is called Mountain Laurel (almost certain of the name, but I could be mixing them up). Both of those are based on the 1.2 bootloader.
Also TNT lite and Roebeet's other mods are typically installed via standard recovery rather than clockwork mod. This is at Roebeet's recommendation, and should have less rick of brickage.
Goodintention's site http://viewsonic-gtablet-for-dummies.webs.com/ should get you up to speed.
Your best bet at the moment may be a full restore with nvflash, which you can read about on the site above. The site will also help clear up the 1.1 vs 1.2 issues.
Thank you very much for the post!
I will follow your instructions and I will post a message tonite with the results of my experiment
Wish me luck
Good luck. Be careful though, my instructions are only a quick guideline, be sure to stick to gtab for dummies site, or something like of these tutorials:
http://forum.xda-developers.com/showthread.php?t=861950
http://forum.xda-developers.com/showthread.php?t=865245
I`ve got it back to stock!!! Thank you!!
Now, I have to install a ROM on it. I will post back the results!
Thank you again! Any tips on getting a ROM installed?
adirom28 said:
I`ve got it back to stock!!! Thank you!!
Now, I have to install a ROM on it. I will post back the results!
Thank you again! Any tips on getting a ROM installed?
Click to expand...
Click to collapse
You really need to go to my site gtab for dummies linked in my signature. There you will find step by step instructions on how to flash (install) a new rom. I hope you used the files provided on my site because the nvflash on my site came with cwm pre-installed. And on my site, you will also find a list of all available roms at this time. Just go there and see for yourself. Make sure you use the "start here" page.
If your on stock 3588 then this tutorial is a great reference guide:
http://forum.xda-developers.com/showthread.php?t=865245
As for installing a ROM it's pretty straightforward and it doesn't sound like you'll have much trouble. Vegan Froyo and Vegan Gingerbread are great solid roms. There's a lot to try out so have fun.
Thank you very much for your help! I will work on this tomorrow and post the results!
Really appreciate your help! Thanks!
adirom28 said:
Hi,
i just got my G tablet recently and I decided to install Clockworkmod and TNT Lite.I followed instructions to install Clockworkmod using the a USB cable and it worked perfectly.I installed v3.0.2.8.Then, I downloaded TNTLite and moved the update.zip file to the root.When I did that, the only option to put it on the root was to replace the update.zip file from Clockworkmod with the new file from TNTLite.I went ahead and installed TNTLite and installed pefectly.I booted the tablet but it got stucked on the splash page with the Viewsonic logo.I don`t know what I did next but now every time i boot it goes straight into Clockwordmod.I reboot and doesd the same thing.When the splash page appears, in the top left corner it says:booting recovery kernel image.
Can anyone help me?
Click to expand...
Click to collapse
Just to add my two cents - it looks like you are mixing up 1.1 / 1.2 dev branch items (luckily you didn't soft-brick!).
TNT Lite is a 1.1 ROM (no longer being developed), but my 3.0.2.8 rev5 cwm is for the 1.2 bootloader, so they aren't compatible. Perhaps you used another 3.0.2.8 that's not mine?
"Mountain Laurel", over in Slatedroid, is he successor to TNT Lite. It's based off stock 4349, and it's 1.2 dev branch based.
As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes.
roebeet said:
As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes.
Click to expand...
Click to collapse
I too am stuck in CWM. I was on the 1.2 ROM branch, and was using the CWM v3.0.2.8 (1.2 branch). How did you get out of CWM? I'm guessing you had to do a nvflash - I've done that before, but how do you get to the APX screen? (if that's what you did).
Roebeet also said "As for the cwm reboot issue, did you try and wipe data in the UI, with cwm installed? If so, the "cwm forever reboot" is known to happen. The "fix" is to get standard recovery installed so that way the data wipe completes."
1) yes I did a wipe data using CWM but not sure what Roebeet meant by "UI (user interface), with cwm installed" - I'm not sure how else I could do a CWM data wipe using the UI?
Edit: got it. In the UI, sometimes under Security, you can do a factory/data wipe from there.
2) The "fix" " is to get standard recovery installed - what is the "standard recovery"? and more importantly, how do I install it?
Edit: Is the standard recovery - going back to the gtab stock (depending on what branch you are on)?