First of all, I am on a MAC and have an 00 baseband Streak and updated it to a 21 baseband and 2.1 Eclair following the instructions here:
http://forum.xda-developers.com/showthread.php?t=754418
Everything worked fine up until the end where after the final reboot it got stuck on the Dell logo. Ok, no problem I used the instructions in "How to unbrick your streak *worked for me*":
http://forum.xda-developers.com/showthread.php?t=754448
As instructed I substituted the 2.1 Eclair pkg for the stock and it flashed perfectly, no issues and booted into 2.1. At this point everything pretty much worked fine.
... UNTIL I decided to try an root it to get rid of the O2 Splash Screen. Universal Androot did not work for me previously so I went with the NExus One Superboot method which worked in the past. That's where it all went to hell and the Dell boot logo came up and the unit just sat there.
I have tried re-doing it, from all the steps listed, but either get a black screen in the recovery phase (after choosing update for sdcard/update.zip) or the Dell logo on boot. I have also tried AdamG's 'rooted eclair build [6841]' img but it also just comes back with the Dell logo (listed below).
http://forum.xda-developers.com/showthread.php?t=753699
... NOW, the only thing that seems to work is clockworkrecovery using AdamG's updated 2.5.0.1 Dell Streak (original or alt img) (listed below) and the 4399-update-streak-stock-rooted-signed.zip file renamed to update.zip.
http://forum.xda-developers.com/showthread.php?t=754563
Every time I put an Update.pkg file on my sdcard and try to update using recovery it gives me a black screen in the recovery process. Renaming it to update.zip just gives me an error when I try to update in recovery mode. I just cannot seem to find a stock recovery ROM that will update using a .pkg file (either stock or 2.1) without giving me a black screen.
Any help/ideas/prayers would be greatly appreciated as I'd hate to think that I now have an $800 paper weight.
Thanks in advance for all your help.
others are also trying to find a fix here.
http://android.modaco.com/content/d...icked-streak-after-update-to-2-1-and-rooting/
Why can't you just fastboot flash the stock recovery and boot images?
i can flash the stock recovery but cant find 1.6 stock .img files. Ive tried with my nandroid images from 1.6 and they dont work, just sits at dell screen. If i flash the stock 2.1 it loads but no radio so useless.
stuliv12 said:
i can flash the stock recovery but cant find 1.6 stock .img files. Ive tried with my nandroid images from 1.6 and they dont work, just sits at dell screen. If i flash the stock 2.1 it loads but no radio so useless.
Click to expand...
Click to collapse
http://android.modaco.com/content/d...30-jun-4399-stock-rom-and-recovery-downloads/
thanks dude, i tried that, and just sticks at dell logo
i can flash the 2.1 image but no radio, i cant flash or get the phone to boot with 1.6. Seems 2.1 has changed something.
fix
please see :
http://android.modaco.com/content-p...reak-after-update-to-2-1-and-rooting/page/40/
just after half way there are instructions from marciu.
worked for me.
stuliv12 said:
please see :
http://android.modaco.com/content-p...reak-after-update-to-2-1-and-rooting/page/40/
just after half way there are instructions from marciu.
worked for me.
Click to expand...
Click to collapse
It's definitely worth a shot for everyone with this issue to try, although it did not work for me.
FIXED
Thanks to marra2 who provided a link to a 1.6 rev.4399 NANDROID backup image I am now up and running. I used it to get my Streak operational then did the update to 2.1 Eclair and all is well.
http://rapidshare.com/files/413271416/2010...30.18.09.56.zip
Original Thread:
http://android.modaco.com/content/d...-nandroid-backups-theyd-be-willing-to-share/#
I was successful at getting it to 2.1 from 2.2.
However, i had issues getting it to the O2 1.6 rom, i ended up using clockwork and the .zip rom of 1.6 and it flashed successfully. However, upon boot i was stuck at the dell screen.
After this i tried all recovery images to get back to 2.1 or a workiing 1.6 install with no avail.
Now im stuck with out being able to do anything but flash recovery images, but cant install a update file because it isnt recognizing my SD card after removing it for some reason.... i tried multiple cards with no luck either.
Oh and to be clear, I am currently on the Build 4399 (rooted, intended for O2 devices) rom with the corresponding clockwork recovery installed. Can not access my SD card now tho.
This just happened to me! Toto modaco and download stock recovery Tom and flash it with fastboot and then you will be able to do why you want
Sent from my Dell Streak using XDA App
dkwelton said:
This just happened to me! Toto modaco and download stock recovery Tom and flash it with fastboot and then you will be able to do why you want
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Yeah i was able to use fastboot to flash someones nandroid backup of 2.1 and get it to finally boot.
I however am stuck back at 2.1 and cant flash 1.6 with out the same thing happening. I have SD card access once again tho.
leadguy68 said:
Yeah i was able to use fastboot to flash someones nandroid backup of 2.1 and get it to finally boot.
I however am stuck back at 2.1 and cant flash 1.6 with out the same thing happening. I have SD card access once again tho.
Click to expand...
Click to collapse
You need the modded stock recovery
http://www.megaupload.com/?d=8LDVERY4
I used this to downgrade before a warranty repair, worked for me
Which 1.6 build is this used for, O2 1.6 or US 1.6 6601 build?
jmr144k said:
Which 1.6 build is this used for, O2 1.6 or US 1.6 6601 build?
Click to expand...
Click to collapse
This recovery image is to used to get you from O2 2.1 build 8105 to O2 1.6 build 4399. It worked for me after several days trying various guides and suggestions on other threads and sites.
I used this recovery image to Flash ROM Streak_104_4399_21.pkg which can be found on other threads.
-Christopher
That modded recovery bricked my streak I'm tryin to get back to 1.6 everytime i run this recovery after downgrading to 2.1 from steves 2.2, I have tried several recoveries and nothing seems to work so stuck on 2.1 atm.
(oh btw I used QDL streakfash to unbrick I dunno if that helps anything.)
It may not be relevant, but I had huge instability with my ROMs for a while, random hard resets, force closes, ROMs not taking properly etc, failed flashes even with 1.6 etc.
Turned out I had one of the bad batches of Streaks with a bad internal MicroSD card. I sent it back to Dell, they replaced the card, and all was well again. Perfect stability etc.
You can confirm this on the diagnostics menu.
V
Hi,
I had my G2 rooted ages ago and was using custom ROMS right up until yesterday. I'm due to get a Desire HD in the post today so was resetting phone to give my girlfriend and thought it easier if she had the Stock ROM.
So I put that back on using the official updater, back to 1.5... However I can't update it to Eclair. Whenever it downloads the update and tries to install it I get a black screen with a phone and a triangle with an exclamation mark
I've most definitely updated with the OTA before... could it be because it was once rooted?
Try going to your country's HTC homepage and download the official 2.1 RUU from there.
If it isn't there, maybe you can find it here http://www.shipped-roms.com/shipped/Hero/
That is where I found my Hong Kong ruu.
Then, also install HTC Sync to make sure your computer will recognize your phone.
Then run the RUU with your phone connected to your computer via USB.
I recently did this and it worked perfectly.
Good luck.
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=283&act=sd&cat=all
I can't seem to find the 2.1 files... There's an option for HTC Sync 2 if you've already got Eclair...
I have found Stock 2.1 ROM on here which could be of use but now I can't seem to install the recovery image so I can install them...
Well I have managed to root it once again as nothing else seemed to work... I then tried to use ROM Manager to install a Custom Recovery like I did before but all I get once it has flashed is the exclamation mark...
I recall last time I used this I ended up using an alternative one it offers at the bottom (RA 1.7?) but this hasn't improved the situation either...
Any thoughts?
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and then restart your current rom. After it finishes turn on development in the applications settings. Then reboot into recovery. Then install from update.apk this will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
rnj79 said:
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
Click to expand...
Click to collapse
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
derechbennoach said:
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and reboot into recover. It will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
Click to expand...
Click to collapse
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
derechbennoach said:
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
Click to expand...
Click to collapse
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I can't get mine to boot normal unless I use the QDL tool to pull it out of the logo screen. If we already have a US Basdeband we shouldn't have to upgrade to O2 and back down again, right?
What do the people, like myself, do who are on the 2.2 318 via QDL Tool build to get the AT&T 2.2 rom released yesterday?? I am already on a US AT&T rom so what sense does it make to have to upgrade to an O2 rom and go back to AT&T (I am thinking out loud...).
I don't want Steve's ROM or anything else... my phone does not play well with those. I want the new official 2.2 released to AT&T locked Streaks.
rnj79 said:
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
Click to expand...
Click to collapse
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I finally bought root Explorer from the market. If there is a free alternative that can change your /system file to r/w (read/write) I could not find one.
You [email protected]!!!!!!!!! (no other alternative, dont think you are smarter than anybodye else, is non-negotiable) to move the 3 files over into your /system file, because the update will not go through. It says there is a "device mismatch" (or something like that). I tried to short circuit all the processes at every step and was unable to beat the system.
Heres what ya gotta do:
1. Follow the part about downgrading to 1.6, then check for software update.
If you have upgraded to ANY other version of 2.2 ya gotta move the 3 files over.
http://forum.xda-developers.com/show...92&postcount=4
Finally I gotta say that it is not worth all the fuss really. You lose tethering and installing outside apps. You gain nothing.
This release is best for djSteve, because he can take all the good parts of this build and put into his next release of streakdroid.
derechbennoach said:
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
Click to expand...
Click to collapse
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
I hosed mine to a black screen that would not turn on.
The repair tool would not get it going.
I found streakflash I tried to get a link, I'll keep looking.
I launched steakflash.
I pulled the battery put battery and back on. As I plugged in the cable I held the UP volume button. Streakflash recognised it and I ran it through.
That got me back up. I forget what ROM it was. I then ran repair tool.
That puts 2.2 pre release.
If I can do it anyone can.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
derechbennoach said:
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
Click to expand...
Click to collapse
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
rnj79 said:
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
Click to expand...
Click to collapse
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
derechbennoach said:
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
It will not work!! I keep getting the status 7 error which then sends it to reboot but never gets pass the logo! The only way to get out of the logo is to pull the battery and use QDL to put me back at 318.
Whats the malfunction with this? I have always managed to update in the past. Why won't this one go through?
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Same Problem
BigBopper said:
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
Click to expand...
Click to collapse
I have the same problem with BigBopper too. Anyone have any idea to fix it?
vanemburghj said:
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Click to expand...
Click to collapse
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
derechbennoach said:
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
rnj79 said:
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
Click to expand...
Click to collapse
Good to hear. Mine is white one. I bricked it twice and have brought it back. I know I am not smarter maybe just lucky.
Good luck.
Sent from XDA app using Streakdroid 1.8.0
I took a plunge back to MIUI and decided to install Glitch today..
Now when I reboot it goes to a CWM 4..something. I hit the fix permission button to try and clean up some FC's but now the phone wont boot past the Glitch Galaxy screen. I can even 3 finger back into CWM.
Anyone know what happened and how i can get past it?
You won't be able to flash any of the "newer" kernels to an old version of GB/Miui. When I tried this I was able to 3 finger into recovery though and reinstall Miui. However sounds like you need to Odin back to stock then reflash. I've found JTs 912 kernel works best with Miui 916. Miui 1028.1 over on the other site is fully functional, I recommend you update to that of.you wish to try the newer kernels.
Same thing happened to me last night. I didn't ODIN back to stock. I just
I followed this http://wiki.cyanogenmod.com/wiki/Samsung_Fascinate:_Full_Update_Guide
I just re-flashed recovery with heimdall and wiped everything then did a full restore of a previous backup I made.