Related
I guess I'm not the first to ask for help with this particular problem.
I use DJ_Steves 1.5.1 rom right now.
Is it possible to go back to Dell's official European software again?
I've read something about a 309 recovery file. What should I do with it?
Is it the file I need to install before I can download Dell's latest software to my phone?
Thanks in advance for your help!
yup u need the 309 recovery file.....flash it in fastboot...
once thts done...assuming u have the pkg file renamed as update.pkg in ur sd card u can boot into recovery and install update.pkg....
Thanx! i will search for the 309 file!
FOTA model name missmatch!
I guess i miss something??
I run a new stock.recovery.img and i worked. Then i run the new update.pkg from sdcard. But it didnt work.
Ii there more steps i have to do before i can run the update.pkg?
i went from 1.5.1 to stock 2.2. v 319 with no issues
First flash the recovery.stock.new.img - link http://www.megaupload.com/?d=8LDVERY4
then reboot to recovery and install update from the stock recovery.
Was a smooth ride for me .
I did exactly like like you but it didnt work. I think i have to change baseband but i didnt understand how
i think once u install the stock rom , it will flash the baseband as well.
OKey! Now im stuck on with Dell logo and the streak doesnt start.
Now im really dont know what to do. :S
omg
bearpower said:
OKey! Now im stuck on with Dell logo and the streak doesnt start.
Now im really dont know what to do. :S
omg
Click to expand...
Click to collapse
Go Back into the Fast boot and flash the Recovery then the update if you use the 309 recovery and 318 update you will not run into any problems i have gone from Steve's back to dells back to Steve's at least 10 times using the 309 recovery
okey! i will try again!
bearpower said:
FOTA model name missmatch!
I guess i miss something??
I run a new stock.recovery.img and i worked. Then i run the new update.pkg from sdcard. But it didnt work.
Ii there more steps i have to do before i can run the update.pkg?
Click to expand...
Click to collapse
I kept having the same issues also. I tried everything i could possible find and just ended up going back to bestbuy and get the phone replaced since i'm under my 30 days. Now i'm scared to even flash this darn white streak... =(
diffstyle said:
I kept having the same issues also. I tried everything i could possible find and just ended up going back to bestbuy and get the phone replaced since i'm under my 30 days. Now i'm scared to even flash this darn white streak... =(
Click to expand...
Click to collapse
Yes...i understand. Little bit scary. :-( B-)
lufc said:
Go Back into the Fast boot and flash the Recovery then the update if you use the 309 recovery and 318 update you will not run into any problems i have gone from Steve's back to dells back to Steve's at least 10 times using the 309 recovery
Click to expand...
Click to collapse
Hi, I was looking to get back to the stock 2.2 also from 1.5.1. So I install the recovery that is posted in the link here and where do I get the stock update file? Is this the one on my SD card from the original 12821 update?
bearpower said:
FOTA model name missmatch!
I guess i miss something??
I run a new stock.recovery.img and i worked. Then i run the new update.pkg from sdcard. But it didnt work.
Ii there more steps i have to do before i can run the update.pkg?
Click to expand...
Click to collapse
I ran into this same problem. Updated to the new stock recovery (link from this thread) then I tried to install the update (12821) from here:http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg
This will update you to baseband: GAUSB1A131800 which is what I am already on so not sure if I'm missing something. Do I need to go to an older baseband to be able to install this update.pkg..?
UPDATE: Figured it out. I was using the wrong recovery image. I thought I had the 309 but I didn't. As soon as I used the 309 recovery with the lastest stock froyo rom (12821) I was golden. Back to 100% stock. If not for this thread, I would have been lost for awhile. Thanks guys!
Raspster said:
I ran into this same problem. Updated to the new stock recovery (link from this thread) then I tried to install the update (12821) from here:http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg
This will update you to baseband: GAUSB1A131800 which is what I am already on so not sure if I'm missing something. Do I need to go to an older baseband to be able to install this update.pkg..?
UPDATE: Figured it out. I was using the wrong recovery image. I thought I had the 309 but I didn't. As soon as I used the 309 recovery with the lastest stock froyo rom (12821) I was golden. Back to 100% stock. If not for this thread, I would have been lost for awhile. Thanks guys!
Click to expand...
Click to collapse
Okey. great.
Where did u get the working 309 recovery file?
have a nice day...or night...whatever u have right now.
Hello,
I bought a dell streak from ebay yesterday running Streakdroid 1.61. Everything was working well when i received it, but I couldn't get access to market because the orignal owner's gmail account was linked to the device. I registered my gmail but it was still not giving me access. I decided to remove his account and the phone prompted that some apps were linked to it so i needed to factory reset.
Since then after flashing Streakdroid1.61 it showed unser clockworkmod recovery menu: E: CAN'T FIND MISC.
After searching I flashed Streakmod Recovery but no matter how many reflashes and reboots and resets phone gets into a continuous booting loop after getting to android logo screen. I feel like trying my hair out. Haven't been able touse my new phone and I have read and tried lots of solutions from here and modaco forum but no joy.
Please help me somebody.
Thanks
Why don't you start off with the QDL Tool and get to 2.2 v305, from there flash streakmod recovery, boot up, download 1.61 or what ever Rom you want. Then reboot and install from zip on SD card. that way you get it from scratch and not have to worry what the other user did to it.
tenorntex said:
Why don't you start off with the QDL Tool and get to 2.2 v305, from there flash streakmod recovery, boot up, download 1.61 or what ever Rom you want. Then reboot and install from zip on SD card. that way you get it from scratch and not have to worry what the other user did to it.
Click to expand...
Click to collapse
Thanks for the reply but I have no idea about the QDL Tool, will have to do a read up then.Or can you guide me?
Use the StreakMod recovery instead of clockwork. It's modified to work with the Streak.
Article
Forum Thread
I am using that, found out on this forum but still no joy.
ZINXYX said:
Thanks for the reply but I have no idea about the QDL Tool, will have to do a read up then.Or can you guide me?
Click to expand...
Click to collapse
Here is the guide for the QDL Tool.
http://streakdroid.com/?page_id=92
Thanks bud, my streak is now working.
hello everybody!
i have problem with installing Streakdroid 1.9. i have tried with clockworkmod recovery but it will not boot into recovery. i don't understand why this happens. So i'm trying with streakmod but i do not know how to install with fastboot, i have installed fastboot on my pc and started in command prompt and i don't know what to do next. so is there any step by step how to do it?
heeelp!!!
Yeeeessss!!!
Here is the fastest way to install streakmod!
Go to http://ilikemygooglephone.com/2010/...-streak-for-windows-mac-linux-andorid-2-12-2/ ,
download files and follow the steps, in folder Streak_iLikeMyGPhone replace recovery with latest recovery from http://forum.xda-developers.com/showthread.php?t=840326 and click 'install-recovery-windows' (this is for windows)
I hope this will help others.
I had to do it twice, but it worked! Thank you for this simple guide! Worked on the Mac OS!
Yes, I had to do it twice too, I do not know why, but it works.
And there is also for linux and MacOS.
Streakmod install issues
Hey I have a Dell Streak on ATT (unlocked) that I am trying to breath new life to its 2.2 Froyo operating system. I am trying to flash DJ Steves Gingerstreak 2.4.4. I found what I believe to be simple instructions once I have StreakMod installed on my Phone. Can anyone help me get this set up? The link in this post seems to be spam, some sort of video player.
I have loaded Streakmod on the computer, have been sucessful with CDL tool and the initial root from 1.6 to 2.2. But I have to do something till I can swing the new G-note
any detailed help on getting/installing Streakmod up and running would be great.
Thanks
Ramhvac,
Better skills searching would be of great aid to you.
Streak Flashing guide
XDA Streak Wiki
My take on modding the Streak
Useful Streak Links
marvin02 said:
Ramhvac,
Better skills searching would be of great aid to you.
Click to expand...
Click to collapse
LMFAO
Marvin, you are too kind
Ramhvcac,
At least you know to use StreakMod and not cwm/rom manager
Thank you, I was expecting to get some crap(Marvin), so I put on my big boy pants before I posted, But I have been so busy that my searches have been sporatic and not continous. I am hoping to have Gingerbread on my Streak this weekend.
again thank-you in advance, for your help.
BIG Trouble with GingerStreak update
Ok, I have flashed the amss and dsp1 files, installed the txt file, re-booted and went into streakmod recovery and loaded Gingerstreak 2.4.4. The phone booted up after 5+ minutes the update seems great except phone does not work.
I get the message"The process com.android.phone has stopped working unexpectedly. Please try again".
Any suggestions? the phone does not seem to reconize my sim card.
Att white Dell streak 5, running Gingerstreak 2.4.4 But no phone!!
Panjabi1985 said:
hello everybody!
i have problem with installing Streakdroid 1.9. i have tried with clockworkmod recovery but it will not boot into recovery. i don't understand why this happens. So i'm trying with streakmod but i do not know how to install with fastboot, i have installed fastboot on my pc and started in command prompt and i don't know what to do next. so is there any step by step how to do it?
heeelp!!!
Yeeeessss!!!
Here is the fastest way to install streakmod!
Go to http://ilikemygooglephone.com/2010/...-streak-for-windows-mac-linux-andorid-2-12-2/ ,
download files and follow the steps, in folder Streak_iLikeMyGPhone replace recovery with latest recovery from http://forum.xda-developers.com/showthread.php?t=840326 and click 'install-recovery-windows' (this is for windows)
I hope this will help others.
Click to expand...
Click to collapse
i flashed it and everything but i still get insert a SD card containing an update file(/sdcard/update.pkg) when i try to get into recovery. can you help me out?
nvm i got it
Ramhvac said:
Ok, I have flashed the amss and dsp1 files, installed the txt file, re-booted and went into streakmod recovery and loaded Gingerstreak 2.4.4. The phone booted up after 5+ minutes the update seems great except phone does not work.
I get the message"The process com.android.phone has stopped working unexpectedly. Please try again".
Any suggestions? the phone does not seem to reconize my sim card.
Att white Dell streak 5, running Gingerstreak 2.4.4 But no phone!!
Click to expand...
Click to collapse
Did you do a factory reset?? (not in streakmod / clockwork)
Do it from dell recovery..
Not sure why people still install gingerstreak anymore. fards left and it seems support has stopped??
Thanks so much. I've tried it with my streak official rom 2.3 and done it without any problem. In my opiion,this is the easiest way to do.
Not sure what happened here. But basically took a totally stock US ATT Unlocked streak and tried upgrading to the Gingerbread 2.3.3 version. Upon doing this, everything flashed correctly but I was stuck at the Dell screen-15 minutes. Pulled the battery and same thing, pulled it again and it actually started loading up. It loaded up and immediately force closes a bunch of things. Tried flashing it again with no luck. Tried flashing the latest ATT recovery with update.pkg and again, stuck at Dell screen. However if I flash CWM and load a custom ROM, it will load into the ROM but immediately force closes everything and it also isn't reading my SIM card. What the heck did I do?! Please help
could we have more details about your flashing procedure?
Have you done a wipe of the dalvik cache and a factory reset? Skipping those two are the most common cause of FC's.
Sorry guys. Initially. I installed the fast-boot drivers, got the phone in fast-boot mode and recognized by the PC. Gather the correct files and flashed the 407 recovery, rebooted and then flashed the update.pkg through the stock recovery manager.
After this failed. I flashed CWM. Wiped it totally and then tried two different custom roms and also installed the amss and dsp1 and still both would instantly start force closing.
I'm a desperate move I did QDL last night and everything was successful, however I attempt to install the latest stock recovery and update.pkg and I'm still getting stuck at the Dell logo.
Try the recovery from 360.
kurdo_kolene said:
Try the recovery from 360.
Click to expand...
Click to collapse
From my understanding. QDL sets the phone back to 305 recovery to be flashed. Should I try installing that, or as soon as QDL finished install the 360 recovery with the 360 update.pkg?
flash the 360 recovery in fastboot mode, reboot into recovery mode and install the 407 update.pkg. After it is installed do a factory reset.
That method isn't working. I flash the 360 recovery in fast boot and loaded the 407 update to the SD card and renamed it. Upon flashing the update I get a "error in SD card \SDcard\update.pkg.dec"
Do I need to add that extension or what's going on here? I'm using the files provided on the Dell Wiki Rom list btw.
quickbird144 said:
That method isn't working. I flash the 360 recovery in fast boot and loaded the 407 update to the SD card and renamed it. Upon flashing the update I get a "error in SD card \SDcard\update.pkg.dec"
Do I need to add that extension or what's going on here? I'm using the files provided on the Dell Wiki Rom list btw.
Click to expand...
Click to collapse
On the wiki page there is also a link for hashes. Click on it and compare the hashes listed with the hash for the file on your local computer. If you have a bad DL the hash will not match.
If the hash matches then try using the 407 recovery, instead of the 360.
Also see this post in case you are coming from 347. I guess that there are issues updating from BB 347.
The easiest way to generate a hash for files in Windows (IMO) is to use the HashCheck shell extension. You right click on a file in Windows Explorer, select properties, and then a tab to view the hashes for a file.
marvin02 said:
On the wiki page there is also a link for hashes. Click on it and compare the hashes listed with the hash for the file on your local computer. If you have a bad DL the hash will not match.
If the hash matches then try using the 407 recovery, instead of the 360.
Also see this post in case you are coming from 347. I guess that there are issues updating from BB 347.
The easiest way to generate a hash for files in Windows (IMO) is to use the HashCheck shell extension. You right click on a file in Windows Explorer, select properties, and then a tab to view the hashes for a file.
Click to expand...
Click to collapse
I've followed everything you just said. I've checked hash files and all are matching. However when you talk about 347, I QDL'd and it put the recovery back to 305 unlocked.
I try to update viaSD card immediately after but it says it can't find the update blah blah. So from 305, I want to flash the appropriate recovery either 360 or 407 and install the 407-update.pkg correct? Then after it reboots from there, do a factory reset? I feel as if I'm very close, just gotta find the right tunnel. I do greatly appreciate all of the help thus far!
Here's a little update to bring everyone where I'm at.
I QDL and then flashed the 407 recovery. Grab the 407 update, rename it and put it on the SD. I flash via update from SD card, everything goes by. It reboots and I'm still stuck at the Dell logo.
After about 15 minutes of this, I pull the battery and then it goes to "Start recovery copy" and then reboots. Then brings me BACK to flashing the stock recovery but this time wants me to flash the 305 recovery??
quickbird144 said:
I've followed everything you just said. I've checked hash files and all are matching. However when you talk about 347, I QDL'd and it put the recovery back to 305 unlocked.
I try to update viaSD card immediately after but it says it can't find the update blah blah. So from 305, I want to flash the appropriate recovery either 360 or 407 and install the 407-update.pkg correct? Then after it reboots from there, do a factory reset? I feel as if I'm very close, just gotta find the right tunnel. I do greatly appreciate all of the help thus far!
Click to expand...
Click to collapse
If you flashed back to 305 with the QDLTool and can get to fastboot I suggest:
Put the rom file on your SD Card. Make sure it is named update.pkg.
Use fastboot to flash the recovery that matches the ROM, in this case the 407 recovery
use fastboot reboot from the command line to reboot the phone and hold down both volume buttons as it reboots to go directly to the 407 recovery you just flashed. Do not let the phone boot normally or you will have to start over.
Now select the second option to update to 407.
This will wipe all settings, apps, ect., from the phone.
---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ----------
I believe that we cross posted. If you have done the steps in my previous post and are still stuck when you flash the 407 recovery also flash the dsp1.mbn and amss.mbn files for 407 then reboot immediately to recovery and do the update.
The phone is pretty much dead now so I'm going to let it charge before I give it another go.
But I believe my problem is dsp1 and the amss files. That's one step that I have not done yet. I think I'm going to QDL again and from there do as you stated.
I did have one question though. My phone was factory unlocked, through all this, is that unlock gone?
Thanks again and I will report back with the results!
quickbird144 said:
. . .
I did have one question though. My phone was factory unlocked, through all this, is that unlock gone?
. . .
Click to expand...
Click to collapse
From what I have read flashing a ROM does not effect the unlock status. I also have an unlocked Streak but have never used it with any other carrier except AT&T so I can not comment from personal experience.
FIXED!!!
I'm back in business!!!
I used the QDL streakflash then the QDL repair tool. Didn't feel like messing around with all those update.pkg's and stupid recoveries so I just flashed CWM recovery, flashed the basebands for Ginger Streak 2.4.4 and it's back up and running!!!!
THANKS A LOT to everyone that helped. I've lost tons of sleep over this and have been up all night trying to get this right and it all paid off. I'm happy
quickbird144 said:
I'm back in business!!!
I used the QDL streakflash then the QDL repair tool. Didn't feel like messing around with all those update.pkg's and stupid recoveries so I just flashed CWM recovery, flashed the basebands for Ginger Streak 2.4.4 and it's back up and running!!!!
THANKS A LOT to everyone that helped. I've lost tons of sleep over this and have been up all night trying to get this right and it all paid off. I'm happy
Click to expand...
Click to collapse
congratulation!!! somehow i just can"t go back to stock rom
Glad you got it going. . . . Done the QDL tool acouple times myself
posted from my Pimped out Dell
HI,
My dell streak gets stuck on dell logo and then reboots again and again. it was not rooted and was working fine on froyo 2.2 O2.
Ive tried installing the update package from recovery mode by selecting install update.pkg from sd card but i get an error saying e:can't mount update.pkg.
After searching i performed an memory test from fastboot; Sd card test passes but the internal memory test fails and gives an error: Cmd/Data test fail. a few days back my computer had a trojan virus and it was converting the folder into shortcuts. I dont know for sure but i think it could have been the cause of this problem as i plug my phone to the pc almost everyday
ill be glad if someone can help me through this. plz can some1 help me through this.plz i really need my dell streak working ill appreciate any kind of help... Thank you
Hi,
rename the update.pkg in update.zip and it should work.
MfG & Gut Pfad
scoute-dich
----
Gesendet von meinem Dell Streak 5 mit Tapatalk.
Think free - use Linux!
If the above doesnt work try a factory reset
Taha.Fazal said:
HI,
My dell streak gets stuck on dell logo and then reboots again and again. it was not rooted and was working fine on froyo 2.2 O2.
Ive tried installing the update package from recovery mode by selecting install update.pkg from sd card but i get an error saying e:can't mount update.pkg.
After searching i performed an memory test from fastboot; Sd card test passes but the internal memory test fails and gives an error: Cmd/Data test fail. a few days back my computer had a trojan virus and it was converting the folder into shortcuts. I dont know for sure but i think it could have been the cause of this problem as i plug my phone to the pc almost everyday
ill be glad if someone can help me through this. plz can some1 help me through this.plz i really need my dell streak working ill appreciate any kind of help... Thank you
Click to expand...
Click to collapse
The trojan you are talking most surely affect only the SDcard, a friend of mine had the same issue on a different device.
I would recommend installing a custom Recovery like Streakmod, flash 366 bb and a ROM like DSC, Longhorn or LXdroid, as those mentioned have the universal kernel that don't check the BaseBand.
Totally wiping everything is a must!
Flashing recovery can be done easely using the MultiFlashing tool provided in the Android Development section, so all this mess wouldn't take more than 1 hour (with reading and wandering if it's safe - it is safe, ia assure you )
Hope this helps/works
hey buddy, when I enter the recovey mode, and will install a new rom or another option, the camera button does not work. What can I do?
Thank you for replying
Lexmazter said:
The trojan you are talking most surely affect only the SDcard, a friend of mine had the same issue on a different device.
I would recommend installing a custom Recovery like Streakmod, flash 366 bb and a ROM like DSC, Longhorn or LXdroid, as those mentioned have the universal kernel that don't check the BaseBand.
Totally wiping everything is a must!
Flashing recovery can be done easely using the MultiFlashing tool provided in the Android Development section, so all this mess wouldn't take more than 1 hour (with reading and wandering if it's safe - it is safe, ia assure you )
Hope this helps/works
Click to expand...
Click to collapse
thanks a lot for replying can you give me a link(s) that have a detailed step by step process as i dont knw much... also i would like to keep the original 2.2 firmware if it is easily possible.. really appreciate your help. I thought that no one will reply... thanx again
Taha.Fazal said:
thanks a lot for replying can you give me a link(s) that have a detailed step by step process as i dont knw much... also i would like to keep the original 2.2 firmware if it is easily possible.. really appreciate your help. I thought that no one will reply... thanx again
Click to expand...
Click to collapse
Well, i will update the first post of my LXdroid ROM with a tutorial, if you want a fully funtional with the least amounts of bugs i will recommend DSC ROM.
But this is not required if you want to keep the original 2.2 firmware, as almost all the custom ROM's that i've talked about are 2.3.x.
the tutorial will be written, Your choice
Lexmazter said:
Well, i will update the first post of my LXdroid ROM with a tutorial, if you want a fully funtional with the least amounts of bugs i will recommend DSC ROM.
But this is not required if you want to keep the original 2.2 firmware, as almost all the custom ROM's that i've talked about are 2.3.x.
the tutorial will be written, Your choice
Click to expand...
Click to collapse
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Taha.Fazal said:
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Click to expand...
Click to collapse
i think you need to replace the internal sd....
http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/1
once you have done that... just do the dell factory reset (white text black background menu)...
your phone should be able to start again
Taha.Fazal said:
im trying to install the 02 rom... ive copied the update pkg and renamed it to update.zip... then i turn on into the fastboot mode and install the recovery.img the phone says install recovery done.. then i restart it and go to the option update from update pkg but then i get the same error e cant mount update pkg e cant mount gif etc
Click to expand...
Click to collapse
As far as i know, you can't possibly install update.pkg using custom recovery, you must install a stock recovery and after that you can flash the update.pkg as it is (update.pkg), changing the extension does nothing
Hope this helps.
Lexmazter said:
As far as i know, you can't possibly install update.pkg using custom recovery, you must install a stock recovery and after that you can flash the update.pkg as it is (update.pkg), changing the extension does nothing
Hope this helps.
Click to expand...
Click to collapse
I installed the stockmod recovery and then copied the dsc 1.0 rom on sd and installed the zip from the recovery mode... installation was successful but after restart it gets stuck on the logo and restarts again and again... after the installation was complete when i press the back button i gives the error e cant mount innersdp01 or some thing like that... id love not to replace the innerSD until it is the last option... thnkyou for being so helpfull
deysmacro said:
i think you need to replace the internal sd....
http://www.ifixit.com/Teardown/Dell-Streak-Teardown/3512/1
once you have done that... just do the dell factory reset (white text black background menu)...
your phone should be able to start again
Click to expand...
Click to collapse
well if i change the inner sd dont i need to copy the system files in it.. or something like that..can u refer a link if ineed to... or will teh factory reset do the job... thank you
Taha.Fazal said:
well if i change the inner sd dont i need to copy the system files in it.. or something like that..can u refer a link if ineed to... or will teh factory reset do the job... thank you
Click to expand...
Click to collapse
you just need to change to anything 8gb and below for the internal sd... and dell factory reset should do the trick...
Thankyou
Thankyou all, Especially deysmacro and Lexzmaster for your help it got fixed by replacing the inner sd after the teardown... nnow im running on DSC 1.0 but ti takes a lot longer to boot and lights keep flashing too... thankyou again
Taha.Fazal said:
Thankyou all, Especially deysmacro and Lexzmaster for your help it got fixed by replacing the inner sd after the teardown... nnow im running on DSC 1.0 but ti takes a lot longer to boot and lights keep flashing too... thankyou again
Click to expand...
Click to collapse
i am glad it is working again... :victory:
light keeps flashing mean your baseband is not matched with the current rom... you should do the upgrade... it is in dsc thread if you read it carefully... it should say something like flashme ... :good:
you may try other rom as well.. if you are interested.. such as longhorn, ics, lxdroid
deysmacro said:
i am glad it is working again... :victory:
light keeps flashing mean your baseband is not matched with the current rom... you should do the upgrade... it is in dsc thread if you read it carefully... it should say something like flashme ... :good:
you may try other rom as well.. if you are interested.. such as longhorn, ics, lxdroid
Click to expand...
Click to collapse
sure ill try other roms can u suggest the best... and thankyou again for replying for the led flashes.. ill surely increase the bandwidth
Taha.Fazal said:
sure ill try other roms can u suggest the best... and thankyou again for replying for the led flashes.. ill surely increase the bandwidth
Click to expand...
Click to collapse
we here dont have the best rom.. all rom usage is really based on preference.. you try this rom and you like it.. well.. that shoul do it
i personally like dsc .72 the best,with 406 bb.
but im waiting for an ics with good data and wifi tether.....and ill be on it
Sent from my pimped out Dell
dell streak 5
how to replaced internal sd? not the sd card at the back of battery holder. please advise i also experiencing that kind of problem, sometimes it is working good but there's a time that it freezing then once i removed the battery then put it back on it keeps on rebooting. i already update with 2.3.3
mokokawi said:
i personally like dsc .72 the best,with 406 bb.
but im waiting for an ics with good data and wifi tether.....and ill be on it
Sent from my pimped out Dell
Click to expand...
Click to collapse
Search the forum as there should be an article covering the process. In short, you either have to take the Streak apart, or cut away some of the plastic above the SIM card slot to get to the internal MicroSD.