Related
Today I was trying to learn to flash my vibrant, i was following directions found here on xda and right after I flashed the update.zip file my phone turned off and now it wont come on at all! help! is there anything I can do to get it working again?!
Odin
Sent from my SGH-T959 using Tapatalk
possible fix
how about you try taking the phone and pulling the plug and taking out the battery
after you do that odin back to stock
First you want to post in q&a. Second as to your phone does it do anything. Does the bottom row of lights come on. Does it boot to any screen? Third have you read the vibrant directory (bible)? Forth have you downloaded odin?
Sent from my GT-I9000 using XDA App
PM me and I'll try and walk you through.
Sent from my GT-I9000 using XDA App
The phone doesnt do anything.. it was fine before i flashed the update.zip file. now i put the battery in and power it doesnt turn on at all i dont even see the samsung boot logo.. when i plug the charger in it doesnt even show that its charging.
Sgreaves23 said:
The phone doesnt do anything.. it was fine before i flashed the update.zip file. now i put the battery in and power it doesnt turn on at all i dont even see the samsung boot logo.. when i plug the charger in it doesnt even show that its charging.
Click to expand...
Click to collapse
Check to see if your battery died somehow, but if you can't turn on your device even with a full battery, you have a real bricked phone.
Battery I fine, if I plug the charger in it doesn't charge or show that it's charging. How could this happen just from flashing a file?
Call tmobile and tell them that your phone said it was updating and once it restarted, it never came back on. They will have you check a few things and then send you a replacement for free. In the future be very careful when learning to mod your phone, ask questions when your not sure. This replacement trick will only get you a phone one time.
I was thinking to do that, only that my carrier is simple mobile, they do not offer insurance, sigh, I think I may be out of a phone
where did you get this update.zip?/
What update.zip did you flash?
Sgreaves23 said:
I was thinking to do that, only that my carrier is simple mobile, they do not offer insurance, sigh, I think I may be out of a phone
Click to expand...
Click to collapse
No; it is unlikely that you are out of a phone. Try this method, either buying or making a USB "test jig." (You can make it if you know how to solder.)
http://board.teamwhiskey.com/viewtopic.php?f=13&t=209
If this does not work, there is another method that is expensive (but less than $500 for a new phone). You will need to find a technician with a "JTAG" test device who has a special bootloader software module from Samsung. The device uses an interface other than USB to access bootloader memory and downloads the bootloader file to the bootloader memory in order to boot the phone into a recovery environment.
The only way that your phone would be completely unrecoverable is if there was a hardware failure at the same time that you were playing around, which is unlikely.
Sgreaves23 said:
Battery I fine, if I plug the charger in it doesn't charge or show that it's charging. How could this happen just from flashing a file?
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Dude it's bricked....game over. Call tmobile and just tell them your phone doesn't turn on anymore, don't tell them how it happened, just that it stopped working. They will send you a replacement for free, if you're still under warranty it is. I bricked mine 2 weeks ago and got my replacement the next day. I tried EVERYTHING to get it back to life....but nothing. Sometimes it happens even though you follow all steps, especially if it messed around with your bootloader.
Good luck. It's no ones effen business what you say happened...most likely they do the same.
You shouldn't even be flashing the update.zip... you should be using like OCLF to do it for you. This should help:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
I would STRONLGY suggest to listen what BruceElliott says, read and follow the directions carefully. In 99% cases you can recover just fine. It's very hard to truly brick vibrant...
bobbbb said:
You shouldn't even be flashing the update.zip... you should be using like OCLF to do it for you. This should help:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Click to expand...
Click to collapse
You've got to be able to get into download mode to do that though. I think that's the problem.
I'd mess around with it for a bit and try all of the tips to get into download mode. I can't believe you'd hard brick it based on what you said. You are positive your battery is okay?
I had the same problem. It would not turn on at all. I called Samsung and they paid to send it back for warrenty repair. It takes 6 business days. They didn't even ask how it happened. I think the number was 800-samsung
Nah, you don't need a Jig just yet
I've ran into that problem MANY TIMES!! The first time it freaked me out too.
Take out the battery, take out the sim card. Leave it for about 5 minutes. Then do these steps:
- plugged the phone in without the battery
- Hold down the 2 volume buttons
- As you're holding those 2 buttons down, insert the batter
- You should be in download mode
- Proceed with Odin
Can you tell us what update.zip you used? Good luck!
I downloaded the 2.3 rom on my tmobile vibrant. Well, i messed it up. It was for like international phones and stuff. So i decided to odin back to stock 2.2. It did it, but now my phone gives me a black screen and i cant do anything. It wont even turn on. Last time this happened i had to send my phone to samsung and get a new one. Someome please help, i dont want to wait for a new phone again.
Sent from my SGH-T959V using XDA Premium App
kevho00 said:
I downloaded the 2.3 rom on my tmobile vibrant. Well, i messed it up. It was for like international phones and stuff. So i decided to odin back to stock 2.2. It did it, but now my phone gives me a black screen and i cant do anything. It wont even turn on. Last time this happened i had to send my phone to samsung and get a new one. Someome please help, i dont want to wait for a new phone again.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Are you able to get in download mode @ all ? ?
Sent from my SGH-T959 using XDA Premium App
Take out battery, run odin, plug usb into computer, plug usb into phone, hold volume up and down but not the power button, replace battery at same time as you hold the two buttons. You really can't kill this phone.
Sent from my Vibrant/ GT9000
get/make a jig as long as your battery still has juice this will force your phone into download mode, from there odin back to stock 2.1 (JFD) i have had the least issues when odining back to JFD
What is a jig? This is op on friends account
Sent from my SGH-T959V using XDA Premium App
rickdossantosjr said:
What is a jig? This is op on friends account
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
A usb jig is a micro usb connector with 301k ohm resistance e across two specific connections ( don't rmr which two connections) that rocks the phones circuitry into pushing the phone into download mode, if I recall correctly instructions on the formation of a jig can be found in the vibrant general section
Sent from my AXURA powered voodoo infused Categorically Worthless Vibrant
The guide on making a jig saids that it wont help me
I really need to get my phone in download mode.
Taking out the battery was no help
kevho00 said:
The guide on making a jig saids that it wont help me
I really need to get my phone in download mode.
Taking out the battery was no help
Click to expand...
Click to collapse
it would help you get into download mode, but aside from that when you press the power button do you see the home keys turn on? if you do id imagine a jig would help. However if not even that helps you probably need to send the phone in.
No, not even the home keys light up.
Crap dont tell me i have to turn it in :/
you try the jig first, its like 5 dollars worth of parts and can only help. Give it a shot, who knows you may get lucky, it could also be that your battery is just drained try charging it in a friends vibe or captivate and see what happens. but at this point it sure looks like you might have to turn it in
This is the second time this happens to me.
Ill just tell Samsung that my phone wont turn on again. Thats what i did when i was rooted and decided to flash my phone to froyo via kies. I didnt get charged $400, so look like they never got it back on either.
did you end up sending it in? this exact same thing just happened to me
^ can you see Anything? Battery charging, cutting it on, trying recovery or download? If so, you are fine. If not, removebattery, wait a while, try again still nothing? Brick likely. What did you do, very hard to brick this phone.
just like the OP said. upgraded to 2.3..didnt like it, tried to go back to 2.2 using odin. it said passed! and has not booted up since..no d/l, no recovery, just black...no nothin
Are the buttons at the bottom lit? Or is it like your phone is just dead? If not the latter, try Eugene's froyo that doesn't brick.
it's like the phone is dead. i cant get anything
Doesn't sound good if you can't see anything. I've seen some say they've removed the battery avg let some time pass and then they were able to get it working, but that seems crazy to me.
unfortunately, i'm not one of those people. i left the battery out for 8+ hrs. and tried again..to no avail....
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?
Hello Everyone,
I have just installed a ROM from CWM, and selected Reboot system, and phone turned off and wouldn't turn back on. nothing, completely black, not even boot up screen, nothing, I pulled out battery and put back in, nothing as well. put it on charger and still nothing.
Not quite sure what to do.
Is there a reset button for it?
Anyone any thoughts?
Thanks.
try to get it into download mode...by pressing power button and down button
It's like im clicking nothing, doesn't make a difference, still powered off.
What rom did you flash on your note?
I have realized that I flashed a wrong ROM on there.
It's for N700 the other note. not the i717
[ROM] CriskeloRomNOTE ICS V1 Beta3
Although im CWM it read the file and expanded it.
You probily have bricked your galaxy note as the 2 different model notes, use different boatloaders as they both use differnt cpu chips.You will have to take your phone to Bell to get it fixed or replaced.
Try this method. ..pull battery and put it back in...hold down volume up and down while plugging into pc...
That may get you into download mode so you can flash the stock rom etc
Sent from my SAMSUNG-SGH-I717 using XDA
You can try one of these. They're only a couple of dollars and supposed to force the phone into DL mode. I believe someone on the forums said it works for the ATT note:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
Nothing worked,
Bell wouldn't send it away because it's been rooted, doesn't that void the warranty.
7ilmi said:
Nothing worked,
Bell wouldn't send it away because it's been rooted, doesn't that void the warranty.
Click to expand...
Click to collapse
you are holding the buttons down yes ? hold the vol down and the power button, HOLD THEM down , if its not hard bricked you should boot to down load,, you will get a vibration and then the down load screan , if you get nothing at all your hard bricked and i think you are out of luck
yeah nothing,
It seems like I am out of luck.
7ilmi said:
yeah nothing,
It seems like I am out of luck.
Click to expand...
Click to collapse
Try the USB jig dude. Worst case is you're out $4.
If the phone does not boot, bell can not tell if it is rooted or not
Sent from my SGH-I717R using xda premium
Phone Samsung Canada and get your phone fixed or replaced. You do no have to go through bell for warrant. It is along faster to deal with Samsung directly as i have done in the past
Sent from my SGH-I717R using xda premium
My first note got permanent black screen like yours for a mistake I made. Return it like i did they'll think it was a defective device. I was in and out in 10 mins.
Sent from my SAMSUNG-SGH-I717 using XDA
That's what I did,
Thanks guys, I got a replacement.
Bricked Phone Returns
For the future, NEVER admit to rooting a phone that cannot be turned on... Almost never comes back once mailed away from the dealer.... They just don't care... Just play dumb at the dealer....
You can buy a jig for $8.00 that will get you to download mode and flash back to stock. I bought mine from video tech out of Texas.
Sent from my SGH-I717R using XDA
I'm sure this has been asked before and I apologize for asking again if so. (I tried to search but couldn't find the files I need.)
I need to get my Vibrant that is on ICS back to 100% factory.
I know I have to repartition to go back but I can't find the factory Odin and PIT file I need.
Thank you all in advance.
This link might be able to help you.
http://forum.xda-developers.com/showthread.php?t=1319802&highlight=stock+odin
Awesome! Thanks.
New problem. (Small but important.)
I am not able to get into Odin download mode. I have all my drivers installed and when I connect the phone the battery icon pops up but if I do the three button method the screen goes black like it's supposed to be it just reboots and either goes back to the battery or powers on. (I am on ICS Passion V12 if that helps any.)
Any advice? I'm stuck without linking with Odin.
NoName9 said:
New problem. (Small but important.)
I am not able to get into Odin download mode. I have all my drivers installed and when I connect the phone the battery icon pops up but if I do the three button method the screen goes black like it's supposed to be it just reboots and either goes back to the battery or powers on. (I am on ICS Passion V12 if that helps any.)
Any advice? I'm stuck without linking with Odin.
Click to expand...
Click to collapse
Cut the phone off, pull the battery out and put it back in. Hold volume up and volume down keys at the same time(do not hold power button) and plug the usb cable in. If you have gingerbread boot loaders then it's really simple, cut the phone off and hold volume up key only then press the power button.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
Cut the phone off, pull the battery out and put it back in. Hold volume up and volume down keys at the same time(do not hold power button) and plug the usb cable in. If you have gingerbread boot loaders then it's really simple, cut the phone off and hold volume up key only then press the power button.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
You are my new Hero!:good:
Thanks again.
NoName9 said:
You are my new Hero!:good:
Thanks again.
Click to expand...
Click to collapse
Lol no problem, glad I could help.
Sent from my SGH-T959 using XDA Premium App
It appears I can't catch a break!:crying:
I got the phone restored to 2.1 and it worked flawlessly.
I plugged it up to my pc to upgrade to 2.2 through Kies. I had charged to 100%, it upgraded successfully and said the device would reboot. It never did.
It appears Kies and 2.2 have hard bricked the phone. I don't get a charging indicator and can't get into recovery or download. The phone is completely unresponsive.
I am really starting to hate Samsung.
Yea - there should be a big warning everywhere not to use kies.
If you connect the phone to the pc does it show up in Odin? If so flash away.
Try the battery method again. Also instead of going to 2.1 you may want to try the Froyo KB5 2.2 Heimdall 1-click:
http://forum.xda-developers.com/showthread.php?t=1674519
download:
http://www.filereactor.com/zcl1dy7zlxbh/UVKB5_Stock_Heimdall-One-Click.jar.html
I haven't used Odin to get the 2.2 stock since the 1-Click
Moped_Ryder said:
Yea - there should be a big warning everywhere not to use kies.
If you connect the phone to the pc does it show up in Odin? If so flash away.
Try the battery method again. Also instead of going to 2.1 you may want to try the Froyo KB5 2.2 Heimdall 1-click:
http://forum.xda-developers.com/showthread.php?t=1674519
download:
http://www.filereactor.com/zcl1dy7zlxbh/UVKB5_Stock_Heimdall-One-Click.jar.html
I haven't used Odin to get the 2.2 stock since the 1-Click
Click to expand...
Click to collapse
Doesn't show in odin cause I can't get into download mode. :-( I'm afraid it's a hard brick as I get no response at all no matter what I try.
have you tried
1. unplugging the phone
2. pulling the battery
3. plugging it into the computer
4. place the battery back in
5. holding volume up + volume down + power
this is how i got to download mode when my phone wasn't responding
I know you said you tried everything i just want to make sure.
rmelendez3 said:
have you tried
1. unplugging the phone
2. pulling the battery
3. plugging it into the computer
4. place the battery back in
5. holding volume up + volume down + power
this is how i got to download mode when my phone wasn't responding
I know you said you tried everything i just want to make sure.
Click to expand...
Click to collapse
Just tried it again. No luck. I guess the phone is trash thanks to Samsung. :-/
Hey there. My phone was unresponsive as well, would not go into download mode, even tried the battery thing..
This link, One-Click Unbrick
Try that and see if it works for you, make SURE you have the latest Java.
My phone wasn't completely black, I had the Phone to PC error, but I could NOT get it to get into download or even see that something was plugged in. It was unresponsive to everything. I tried this program and BAM, I'm back into bootlooping. Shut my phone off, turned on in bootloader and reinstalled everything.
You MAY have to reinstall somethings so you might have to go back to square one, however at least you'll have a working phone.
Kies also bricked my first Galaxy.
Hopefully the One-Click unbrick will work for you! I wish you good luck!
NoName9 said:
Just tried it again. No luck. I guess the phone is trash thanks to Samsung. :-/
Click to expand...
Click to collapse
Samsung may replace the phone for you, call and tell them it bricked while using kies. For future reference do NOT use kies ever again, it is known to brick devices. If your phone is getting no power at all, then calling Samsung is your only choice and hope they replace it for you. I wish I would have known you were planning to use kies, definitely would have warned you not to. You can look into buying a usb jig for your phone, they are under $5 and maybe could help. You can also make them yourself for around 1 dollar.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
Samsung may replace the phone for you, call and tell them it bricked while using kies. For future reference do NOT use kies ever again, it is known to brick devices. If your phone is getting no power at all, then calling Samsung is your only choice and hope they replace it for you. I wish I would have known you were planning to use kies, definitely would have warned you not to. You can look into buying a usb jig for your phone, they are under $5 and maybe could help. You can also make them yourself for around 1 dollar.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
NoName9 said:
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
Click to expand...
Click to collapse
Yea you could be right about the warranty issue but it was Samsung's program that screwed up your phone. If you haven't called them already, I would call and explain that you would still have a working phone if it wasn't for kies bricking your device. After all, Samsung recommends us to upgrade through kies even tho it has caused more damage than good from my experience. It's worth a try, you never know.
Sent from my SGH-T959 using XDA Premium App
NoName9 said:
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
Click to expand...
Click to collapse
Just so you know, we recently had another member that hard bricked his phone using kies and was also out of warranty with T-Mobile. He called Samsung and explained THEIR program/software rendered his phone useless. He got a brand new vibrant out of the deal.
Sent from my SGH-T959 using XDA Premium App