I've read through tons of threads trying to figure this out.
I'm running rooted OTA 2.2 (froyo) since 4/21/11 and am very happy with the performance so I'm trying not to mess with roms/kernal upgrades.
Is it possible to change my boot animation and sound without replaceing the stock kernal. (if not what kernal should I use?) I've read and read about trying to change or edit the .qmg file but no luck so far.
Also, what should I use or do to hide/remove all the bloat on my applications menu?? If I change my kernal to OTB would I notice any performance diferance from stock 2.2 froyo and would that help my situation?f
Thank you in advance for any insight on this.
You have to have a kernel that supports custom boot animations, and the stock one does not. Adrynalyne has some that work very well, and they can be found in the ROM/Kernel sticky in the developer forum. Most custom kernels will say if they support this feature.
As far as removing bloatware, both uninstaller pro and titanium backup have the ability to remove bloatware that verizon shoveled on us.
Related
Okay, the headline might be a bit dramatic, but I've used a couple of days figuring all this android stuff out.
I've rooted my HTC Hero G2 (European version). I was previously using the official 2.1 with LauncherPro modding and stuff and I liked the speed, but wanted to try out Froyo.
So I started out by rooting..
Then I installed Fusion!ROM 2.2, but after the installation I played around with the phone a little and found it to be a bit laggy. I then started reading some stuff about Kernels and overclocking.. But it's impossible for me to find a proper and well describing guide on how to do this..
I read that it's just like flashing a rom but do you do flash it to the phone after flashing the custom rom?
Of course this is not something I played around with when using the Fusion!ROM because I downloaded the version called:
Software over-clockable version... clocks reset when phone is rebooted...
And just now I found out that I needed to download some software to overclock the phone but isn't there some easier way.. for example downloading some of the other versions, but I didn't want to download because I'm afraid of breaking my phone in unawareness.
Also I read about FroydVillain 1.4 (but is this a Froyo version? Assuming so on the name, but couldn't find a statement on the download site..) and it seems to be a very popular rom including LauncherPro and ADWLauncher.. And since I liked LauncherPro on the official 2.1, I'm thinking about checking this one out.. but again I'm stuck with the kernel/overclocking question..
I thank you in advance for a guide / some good advice and as you might have noticed I'm quite new to all this stuff so I'm sorry for being a newb
1. First you need the custom rom and if you want a kernel, you should flash the kernel on top of the custom rom, just get into recovery mode and press flash zip and choose the kernel.
2. Software over-clockable version... clocks reset when phone is rebooted just means that you can overclock your rom with software like SetCPU and overclock widget, which means that you can set your desired speed in the software. And you can't break your phone by flashing a kernel or overclocking it.
3. Yes froydVillain is a 2.2 (froyo) ROM
Flash ROM > Flash Kernel
And definitely try FroydVillain (yep, it's Froyo).
Cheers!!
I didn't expect getting an answer before tomorrow but seems I was wrong.
I just flashed the FroydVillain and I'm about to try it out.
Is there any restrictions to what the HTC Hero / G2 can handle of kernels? And what are the differences between them?
On the FroydVillain page I've find a couple of different ones.. 614 / 652 / 691 and so on.. One idea on which one is fitted for a G2?
Once again.. thanks in advance!
Everybody's Hero's are different and can handle different clock speeds. 652 is safe, most can handle 691 and the 700s are pushing it for many.
Just a matter of trial and error to see the fastest yours can take.
Doesn't the initial clock speed have some limitations on the battery life time on the phone?
I also have just one question to the FroydVillain which you might be able to answer for me...
I doesn't seem like my Lock Screen works..? I've set up a pattern but nothing really happends. I've also added the Power Control widget and ensured that the lock pattern is enabled through this widget..
EDIT: I know why.. nvm
Thread moved to Q&A.
I am currently playing around with customizing my own rom for personal use based of the plain de-odexed rom. I have added various packages like:
Camera mod
oc4 1.2 jac kernal
mobileAP
some custom themes and fonts
swype with voice icon
GPS files from leak
ect
My question is with all the main roms (eugene and Bionix) released there are always references to "Build.prop mods for better data throughput", how can I take JUST THOSE CHANGES and port them into my rom. Is it as simple as using abd pull and push with certain files? Do I need someone to make me a flashable zip package?
Also I noticed eugene in his latest build used a different camera and would love to try that is that just as simple as adb pull and pushing the camera apk?
Any help provided would be truly appreciated I am still kinda a noob.
Also just to be EXTREMELY clear this is only for my personal use and basic knowledge. I wish to take nothing away form the absolutely stellar work these guys do everyday, I simply have some different preferences then the main roms created and would love to learn to take the advantages of each rom and customize them to my own needs.
No one can help me out?
Should I ask in dev section as no one here seems to have any ideas?
I'm in same boat
I am doing the same.i noticed in bionix build.prop the symlinks. I like that.but he also references a "jit" did they port a jit? that would rock
I have the stock 2.2 from T-Mo. Were can I find mods for the lock screen, battery, and anything else? How about themes?
there are mods here: http://forum.xda-developers.com/forumdisplay.php?f=711
but not many themes because not many people here use stock, so most people don't bother making themes for them.
but you must be rooted no matter what for mods or themes i hope you know.
Root the phone, then make a titanium backup, then you can try a theme or mod,
Then if you get hung, you can revert back, or reflash the 2.2
How do I know what mods I can and can not use? I really do not want to flash a ROM just for a new lock screen or a battery icon when I can just mod that portion.
Hi guys
I just got this phone and it is currently 2.3.4
I've done some researches on xda about 2.3.5 and I've found quite a lot of stickies about it. Most popularly are the villian and omega, I just don't know which one fits more nicely for a android noob.
My goals:
Update my sgs2 to 2.3.5 (i've seen none negative feedbacks, so why not)
Root
CW Backup Manager
apps freezer and administrator (kill/allow root access for the sake of side-loading)
maybe (later on) running games emulators (should I go with CFW now)
So if anyone can point me to the right direction for each of my goals because I've found them but I don't know which is best for noob.
Even though i am a noob, following instructions is my thing, I can go from noob to expert really quick so do not hesitate to educate me!
Roms are a personal choice. Stuff added, Stuff removed, themed.
I like the stock firmware and I like it odexed. You can read up on deodexed vs odexed.
There are several 2.3.5 versions but for now I'm finding KI3 (2.3.5) stable and slick. Battery life is good but battery life depends on several things. Modem, rogue apps, kernel, etc.
You can get the official firmware from intratechs original firmware thread.
I would flash KI3 then your stock csc and possibly modem. *#1234# dialed into keypad will list your original firmware etc.
Easiest way to root is with chainfires cfroot kernels. Essentially Stock kernels but rooted.
Both these threads are in the development section.
Buy titanium pro from the market and use it to backup/restore and freeze/remove unwanted apps. Threads around containing what is safe to freeze/remove.
That will give you a good starting point or base to expand on.
If you want to theme I recommend jkay delux.
Look and feel can be changed with 3rd party launchers, dialers, sms apps, etc. Check out the GO Stuff from the market.
If you want to under clock you can use setcpu with the stock kernel.
If you want to under volt/under clock or over clock you can flash a different kernel. Try siyah kernel with setcpu.
Hope this helps.
Sent from my GT-I9100 using XDA App
i just flash kernel ki3, (8mb) file i downloaded under intratech official firmwares...kernel version now is ki3, how do i upgrade to android 2.3.5??
nvm that i figured it out....is it better to go for Poland KI3 or Frankenstein KI3. I know it's a personal choice, but i would like to hear personal preferences
Hi,
I am a new Galaxy S II (i9100) owner. I have a couple of questions, if some of the experienced users could please assist me I would greatly appreciate it. My questions are listed by priority:
EDIT: I am rephrasing my questions and putting the answers that I feel are best suited so that people who are interested can see the answers in one clean post
1) I understand that CM Mod is based on AOSP and is used as a base on a lot of ROMS but could someone please explain to me how a ROM could be an AOKP ROM and "Based on CM10". Are they taking certain modules from CM10 and certain things from an AOKP Build and putting it together?
ROMS usually take the best of CM and AOKP and combine to produce a more stable base.
2) I know what CWM is but once you use ODIN to flash CWM onto your phone where does it go? By this I mean, does it sit on the ROM or somewhere on your Internal SD card (or both, maybe it puts settings on your SD card). I would like to know if I format my Internal memory will it remove or cause CWM to bug out?
CWM will get removed from your phone if you flash a Kernal that doesn't have CWM on it. It will also get removed from your phone if you "format" the internal SD as that is where it is stored. CWM will NOT be removed if you flash a update to your phone that doesn't require you to "wipe"
3) I am not a fan of the Stock Samsung ROMS because of the bloatware that it contains. However, is it all possible that these Stock Samsung ROMS have built in optimization code or something that works better for my specific device? I ask this because the best battery life I've managed to get was on Stock Samsung ICS where as my battery life dies on any of the JB Roms (Even SlimBean)
AFAIK Stock Roms are optimized for basic / standard features. Custom ROM's can be optimized for the way you use your phone. A Stock ROM is a "One Size Fits all ROM" a Custom ROM can be "Tailored" to fit your needs.
4) I understand how I/O Schedulers / Governors etc work but what advantage does using a non stock Kernel have? As far as I understand these can be changed on any rooted Kernel or am I incorrect?
I/O Schedulers / Governors can be changed on rooted or non rooted Kernels. Rooted Kernels have access to their own custom schedulers and governors.
5) When I download an app from Play store is there no way for me to not install it and just download the APK? So that I don't have to backup all my apps (I don't like using Titanium very much) and so that I can just reinstall the APK files from my internal Memory?
No There is no way to get around this. Install APK files from the Web. Use Titanium Backup to backup applications installed from the Play Store.
6) I've followed the guide to enable or disable Fast Dormancy (I'm still learning about this) however when I type the code in my phone (*#9900#) or (*#0011#) nothing happens. Is this because I'm running JB and these codes only work on ICS?
These codes only work on Stock ROMS
7) When I have a look at my battery usage (currently on CM10) screen says "52%" even though my brightness is set to like 25%. I am trying to figure out why my battery is dying so fast. Is this normal?
There is no "Normal". Too many factors involved. Have a look at the BBS Thread http://forum.xda-developers.com/show....php?t=1179809. You may post your BBS dump/log in this thread and ask the experts to analyze it for you.
8) What is the main difference between AOSP and AOKP? I understand that AOKP will open up a lot of other customizations to me but what are these customizations? I assumed it was things like setting the governor and the I/O Scheduler etc but I've installed ROMS based on AOSP that allows me to do that.
Busy Formulating an answer
9) Galaxy S2 Modems I keep flashing different modems on my phone but I see no change in signal whatsoever is there an application or anything that can help me get an accurate benchmark so that I know which modem is "best" for me?
This is usually done by trial and error. Have a look at the Modem / RILS thread to ensure that your Baseband and RIL version match. Alternatively you can use an app called GETRIL which will get the correct RIL file for your modem
10) Please don't mistake this as a "What's the best ROM??" question. I've tried many different ROMs and I still haven't got a favorite I am looking for someone who has an idea of which ROM will mostly fulfill my requirements which are:
(BTW I'm leaning towards SlimBean here)
1) JB (I love JB keyboard)
2) Battery life (I think I'm looking for something that uses the conservative governor)
3) I mainly use my phone for WhatsApp (I use this ALOT) and browsing (barely for games)
4) Lightweight (I don't want Samsung Apps, I don't want a ROM that has 3 launchers etc.)
5) I don't mind charging my phone once every 16-18 hours.
6) Preferably AOKP so I can mess around and experiment and perhaps give back to the community
This is my personal opinion but I think that SlimBean will best fit my requirements
lickwidice said:
Hi,
I am a new Galaxy S II (i9100) owner. I have a couple of questions, if some of the experienced users could please assist me I would greatly appreciate it. My questions are listed by priority:
1) I understand that CM Mod is based on AOSP and is used as a base on a lot of ROMS but could someone please explain to me how a ROM could be an AOKP ROM and "Based on CM10". Are they taking certain modules from CM10 and certain things from an AOKP Build and putting it together?
2) I know what CWM is but once you use ODIN to flash CWM onto your phone where does it go? By this I mean, does it sit on the ROM or somewhere on your Internal SD card (or both, maybe it puts settings on your SD card). I would like to know if I format my Internal memory will it remove or cause CWM to bug out?
3) I am not a fan of the Stock Samsung ROMS because of the bloatware that it contains. However, is it all possible that these Stock Samsung ROMS have built in optimization code or something that works better for my specific device? I ask this because the best battery life I've managed to get was on Stock Samsung ICS where as my battery life dies on any of the JB Roms (Even SlimBean)
4) I understand how I/O Schedulers / Governors etc work but what advantage does using a non stock Kernel have? As far as I understand these can be changed on any rooted Kernel or am I incorrect?
5) When I download an app from Play store is there no way for me to not install it and just download the APK? So that I don't have to backup all my apps (I don't like using Titanium very much) and so that I can just reinstall the APK files from my internal Memory?
6) I've followed the guide to enable or disable Fast Dormancy (I'm still learning about this) however when I type the code in my phone (*#9900#) or (*#0011#) nothing happens. Is this because I'm running JB and these codes only work on ICS?
7) When I have a look at my battery usage (currently on CM10) screen says "52%" even though my brightness is set to like 25%. I am trying to figure out why my battery is dying so fast. Is this normal?
8) What is the main difference between AOSP and AOKP? I understand that AOKP will open up a lot of other customizations to me but what are these customizations? I assumed it was things like setting the governor and the I/O Scheduler etc but I've installed ROMS based on AOSP that allows me to do that.
9) Galaxy S2 Modems I keep flashing different modems on my phone but I see no change in signal whatsoever is there an application or anything that can help me get an accurate benchmark so that I know which modem is "best" for me?
10) Please don't mistake this as a "What's the best ROM??" question. I've tried many different ROMs and I still haven't got a favorite I am looking for someone who has an idea of which ROM will mostly fulfill my requirements which are:
...
Click to expand...
Click to collapse
Ha ha, next time, please don't post so many questions in one post.
Then you will get more answers IMO.
I can't answer every question, but I'll try my best:
1) As I am using stock / Sammy ROMs only, I can give no clue to that. Please search and read a bit in ROM threads.
2) In SGS2 firmware, recovery (CWM is a special, enhanced recovery) is included in the kernel. If you format your internal memory (sd card), it will be removed, and will have to flash a new firmware (whole ROM including a new kernel with recovery) to your phone.
3) I like stock / Sammy ROMs, but custom ROMs may include same or similar device-specific drivers/etc. AFAIK.
4) Most custom kernels support different I/O Schedulers and CPU Governors. So you can switch to the one you like/prefer.
5) Apps from Play store will be automatically installed on your phone. That's why so many users are using Titanium Backup.
6) There is an app from gokhanmoral to switch Fast Dormancy on/off. I don't have the link, so you have to search for it here on xda. The USSD codes won't work on some ROMsm such as non-stock or JB.
7) Have a look at BBS thread => http://forum.xda-developers.com/showthread.php?t=1179809. You may post your BBS dump/log in this thread and ask the experts to analyze it for you.
8) Have already google it, or look at wikipeadia. I have no better answer ... sorry.
9) Have a look at the modem thread here => http://forum.xda-developers.com/showthread.php?t=1131950, and here for modem/RIL files => http://forum.xda-developers.com/showthread.php?t=1881304
10) No "What's the best ROM??" question?! Sounds like that to me You have to check different ROMs yourself and decide yourself what's best for you and your needs.
Good luck !
lickwidice said:
Hi,
I am a new Galaxy S II (i9100) owner. I have a couple of questions, if some of the experienced users could please assist me I would greatly appreciate it. My questions are listed by priority:
1) I understand that CM Mod is based on AOSP and is used as a base on a lot of ROMS but could someone please explain to me how a ROM could be an AOKP ROM and "Based on CM10". Are they taking certain modules from CM10 and certain things from an AOKP Build and putting it together?
2) I know what CWM is but once you use ODIN to flash CWM onto your phone where does it go? By this I mean, does it sit on the ROM or somewhere on your Internal SD card (or both, maybe it puts settings on your SD card). I would like to know if I format my Internal memory will it remove or cause CWM to bug out?
3) I am not a fan of the Stock Samsung ROMS because of the bloatware that it contains. However, is it all possible that these Stock Samsung ROMS have built in optimization code or something that works better for my specific device? I ask this because the best battery life I've managed to get was on Stock Samsung ICS where as my battery life dies on any of the JB Roms (Even SlimBean)
4) I understand how I/O Schedulers / Governors etc work but what advantage does using a non stock Kernel have? As far as I understand these can be changed on any rooted Kernel or am I incorrect?
5) When I download an app from Play store is there no way for me to not install it and just download the APK? So that I don't have to backup all my apps (I don't like using Titanium very much) and so that I can just reinstall the APK files from my internal Memory?
6) I've followed the guide to enable or disable Fast Dormancy (I'm still learning about this) however when I type the code in my phone (*#9900#) or (*#0011#) nothing happens. Is this because I'm running JB and these codes only work on ICS?
7) When I have a look at my battery usage (currently on CM10) screen says "52%" even though my brightness is set to like 25%. I am trying to figure out why my battery is dying so fast. Is this normal?
8) What is the main difference between AOSP and AOKP? I understand that AOKP will open up a lot of other customizations to me but what are these customizations? I assumed it was things like setting the governor and the I/O Scheduler etc but I've installed ROMS based on AOSP that allows me to do that.
9) Galaxy S2 Modems I keep flashing different modems on my phone but I see no change in signal whatsoever is there an application or anything that can help me get an accurate benchmark so that I know which modem is "best" for me?
10) Please don't mistake this as a "What's the best ROM??" question. I've tried many different ROMs and I still haven't got a favorite I am looking for someone who has an idea of which ROM will mostly fulfill my requirements which are:
(BTW I'm leaning towards SlimBean here)
1) JB (I love JB keyboard)
2) Battery life (I think I'm looking for something that uses the conservative governor)
3) I mainly use my phone for WhatsApp (I use this ALOT) and browsing (barely for games)
4) Lightweight (I don't want Samsung Apps, I don't want a ROM that has 3 launchers etc.)
5) I don't mind charging my phone once every 16-18 hours.
6) Preferably AOKP so I can mess around and experiment and perhaps give back to the community
Click to expand...
Click to collapse
1. Yes the best of cm and AOKP where combined to produce a more stable base.
2. CWM or clockworkmode is a phone based recovery that allows you to make changes without powering and rebooting the phone in recovery mode. It is added to rooted kernel and will disappear if you flash a wiped or standard kernal over it.
It will not disappear if you flash an non wipe update to your phone.
3. jb roms are getting better with the battery as new optimizations are being intergrated. Stock roms were designed around the battery with minimal features implemented, when you add apps your battery will start get worse.
4. yes they can be changed on rooted kernals or non rooted kernals. On rooted kernals it gives you more control over the functions of the phone.
5. unfortnately play store automatically installs the apks automatically. you need to back them up with a program similiar to titanium back up. They are a few different versions in play store just find one you like. Only non play store apps download the apk for you to install yourself. One of the functions of CWM is to allow you to install APKS. I System Tuner Pro myself.
6. Correct, those codes only work with the stock keyboard and ics roms as JB Have very little stock apps included.
7. How fast the batttery discharges depends on a number of factors like what apps are running, If you leave wi fi on and if you have wake locks. BBs which is a battery recording app can found on this forum. Make a log of a day and post it and experenced members will review it and advise what to do to get better battery life.
8. You need to ask a developer what the differences are. But I think AOKP is an upgrade of AOSP.
9. No trial and error is the only method. Your baseband and ril must match to get the most efficiency
out of your modem. There is a small program called GETRIL which will update the ril for you.
10. unfortunately everybody's preferences are different so it is another case of trying roms till you find on you are happy with.
I hope that these answers of some help.
@It_ler @Cosmic Blue
Thanks for the replies... I have a better understanding already. I've read up on GETRIL and will give that a try.
2) In SGS2 firmware, recovery (CWM is a special, enhanced recovery) is included in the kernel. If you format your internal memory (sd card), it will be removed, and will have to flash a new firmware (whole ROM including a new kernel with recovery) to your phone.
Click to expand...
Click to collapse
2. CWM or clockworkmode is a phone based recovery that allows you to make changes without powering and rebooting the phone in recovery mode. It is added to rooted kernel and will disappear if you flash a wiped or standard kernal over it.
It will not disappear if you flash an non wipe update to your phone
Click to expand...
Click to collapse
I understand. But is the internal memory partitioned? If I use X-plore I have a 11gig SD Memory and then I have a "/Root" folder which is 2gigs
Structure looks like this: /sdcard 11gb (10.9gbfree)
/root 2gb (1.7gb free)
Does CWM and Kernel not sit in /root? and is "/root" not a separate partition?
So...Instead of doing your own research & getting full/accurate answers to your questions (and learning a lot in the process), you'd rather sit here & wait for 'users' to give you mostly vague-ish answers to them ?
(Hint: By & large, developers do not read Q&A. They have better things to do.)
Edit - List of SGS2 partitions
MistahBungle said:
So...Instead of doing your own research & getting full/accurate answers to your questions (and learning a lot in the process), you'd rather sit here & wait for 'users' to give you mostly vague-ish answers to them ?
(Hint: By & large, developers do not read Q&A. They have better things to do.)
Edit - List of SGS2 partitions
Click to expand...
Click to collapse
MistahBungle this is a Q&A thread if you don't have any A's then rather don't post. I've had the Galaxy for 3 days. In 3 days I've read a lot and done a lot of research. You reply makes no sense that's like saying: "So Instead of failing many times and then getting it right you'd rather Google and get it right the first time?". I posted here because I know 90% of the people here are experts and will give me the answers I'm looking for. Also, I'm not posting questions like "OMG Lulz teach me how to root my phone" you can see that I've tried and these are questions that I have after trying out different ROMS.
Thanks to those that are willing to help, this is what builds a good community.
So that link I posted is an illusion, huh ?
MistahBungle said:
So that link I posted is an illusion, huh ?
Click to expand...
Click to collapse
OMW Oops :/. I'm so sorry I didn't even see that link I thought it was a signature. Thanks for the link you posted it is very helpful I'm reading it right now.
Before you start getting hostile please realise nobody on this site is obliged to help you and anyone who does reply to your thread does so in their own time and off their own volition. Beggers can't be choosers.
But otherwise your post isn't too bad. The differences between CM and AOKP are mainly cosmetic and to do with feature. There is no "AOSP" as everything is at its core based off AOSP. I always image AOKP as just a more streamlined, feature inclusive CM but recently they have started to add their own tweaks etc. Honestly, it doesn't matter anymore because with Siyah kernel (and kernels like it) being able to work on multiple platforms you can have ROMs with CM base and AOKP+Paranoid features.
The "features" I'm talking about are stuff like integrated weather, quick flashlight toggle, change the battery/signal display, etc etc.
postfatal said:
Before you start getting hostile please realise nobody on this site is obliged to help you and anyone who does reply to your thread does so in their own time and off their own volition. Beggers can't be choosers.
But otherwise your post isn't too bad. The differences between CM and AOKP are mainly cosmetic and to do with feature. There is no "AOSP" as everything is at its core based off AOSP. I always image AOKP as just a more streamlined, feature inclusive CM but recently they have started to add their own tweaks etc. Honestly, it doesn't matter anymore because with Siyah kernel (and kernels like it) being able to work on multiple platforms you can have ROMs with CM base and AOKP+Paranoid features.
The "features" I'm talking about are stuff like integrated weather, quick flashlight toggle, change the battery/signal display, etc etc.
Click to expand...
Click to collapse
I do agree that I should've responded in a better way, and that people are not obliged to help me. That's why I thank the people that do help. However, commenting on a thread and telling the OP to do his research doesn't seem constructive to me whatsoever (I've seen many threads like this). Posting a link is a quick CTRL+V and is way more constructive IMO.
Thanks for clearing up the differences for me. It makes a lot of sense. Everything is based on AOSP since that is the most "pure" release. AOKP is modified AOSP and CM is also Modified AOSP. So essentially most AOKP Roms take the best from AOKP builds and CM builds.