Hello,
I have downloaded the libpcap in external folder from android source code using the Git and
repo. I used the toolcains of ndk (android-ndk-r5b) to compile the library following these
steps:
./configure --prefix=path-to-android-src/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin
make clean
make
make install
and then a file libpcap.a is produced.
I have make a simple sniffer using libpcap (sniffer.c). When I try to compile it, these errors occur:
agcc sniffer.c libpcap.a
sniffer.c:9:18: error: pcap.h: No such file or directory
sniffer.c:19: warning: 'struct pcap_pkthdr' declared inside parameter list
sniffer.c:19: warning: its scope is only this definition or declaration, which is probably not what you want
sniffer.c: In function 'processPacket':
sniffer.c:23: warning: incompatible implicit declaration of built-in function 'printf'
sniffer.c:24: error: dereferencing pointer to incomplete type
sniffer.c:26: error: dereferencing pointer to incomplete type
sniffer.c:33: error: dereferencing pointer to incomplete type
sniffer.c: In function 'main':
sniffer.c:45: error: 'pcap_t' undeclared (first use in this function)
sniffer.c:45: error: (Each undeclared identifier is reported only once
sniffer.c:45: error: for each function it appears in.)
sniffer.c:45: error: 'descr' undeclared (first use in this function)
sniffer.c:46: error: 'PCAP_ERRBUF_SIZE' undeclared (first use in this function)
sniffer.c:62: warning: incompatible implicit declaration of built-in function 'printf'
sniffer.c:66: warning: incompatible implicit declaration of built-in function 'fprintf'
sniffer.c:66: error: 'stderr' undeclared (first use in this function)
sniffer.c:72: warning: incompatible implicit declaration of built-in function 'fprintf'
when I try to produce the object code in advance:
agcc -c sniffer.o sniffer.c
the same errors occured.
Can someone explain me how to solve this problem?
here is the alias of agcc I use in bashrc file:
./configure --prefix=/home/petsas/projects/mobile-attacks/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/
Also, I have attached a file with the outputs of the commands above: configure, make and make install.
Thank you in advance!
I used the options -I and -L to specify the include and library files, and these errors are gone now..
Here is my new error log:
agcc --static -I /home/petsas/projects/mobile-attacks/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/include -L /home/petsas/projects/mobile-attacks/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/lib -o sniffer sniffer.c libpcap.a
/home/petsas/projects/mobile-attacks/android-ndk-r5b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: libpcap.a(pcap-linux.o): Relocations in generic ELF (EM: 3)
/home/petsas/projects/mobile-attacks/android-ndk-r5b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: libpcap.a(pcap-linux.o): Relocations in generic ELF (EM: 3)
/home/petsas/projects/mobile-attacks/android-ndk-r5b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: libpcap.a(pcap-linux.o): Relocations in generic ELF (EM: 3)
libpcap.a: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
any ideas?
I'm not 100% sure, but if you want to build native library for android you shouldn't use ./configure script. You should create Android.mk file and build library using it. Android.mk file is a native build environment for Android.
Refer to android-ndk\docs\ANDROID-MK.html for more information.
Yeah!
Thank you Zuljin!!!
I put the libpcap direcotry into the android-ndk-r5b/samples, I modified a bit the Android.mdk
and the structure of the direcotry, so as to look like the other ones inside the samples dir and
I used the ndk-build command inside the android-ndk-r5b direcory:
ndk-build -C samples/android-ndk-r5b
All worked fine! I was able to produce a libpicap.so file, and put it in the phone using the
commands:
in android:
# su
# mount -o,rw remount /dev/block/mtdblock4 /system/lib
in my Desktop:
$ adb push libpcap.so /system/lib/
I made a simple sniffer, I compiled and linked with the libpcap.so and works perfectly in
my HTC Hero!
Hi,
I have also trying to build this libpcap on Android.
I have downloaded the source from platform_external_libpcap and put all these files under jni directory for a android-ndk project (default) and tried building using ndk-build script.
But nothing happens but the control returns plainly without compiling the .so or .a file.
Can you tell me how you organized the folders in ndk project.?
regards,
Vijayan
Hello Vijayan,
You have to make a directory i.e. libpcap and then inside this directory,
you've got to create another one named as jni and put there all the source
files, as you have done. Then, inside this directory (jni) create a file named as
Android.mk so that it contains the follow lines:
LOCAL_PATH:= $(call my-dir)
include $(CLEAR_VARS)
LOCAL_SRC_FILES:=\
/bpf_dump.c\
/bpf/net/bpf_filter.c\
/bpf_image.c\
/etherent.c\
/fad-gifc.c\
/gencode.c\
/grammar.c\
/inet.c\
/nametoaddr.c\
/optimize.c\
/pcap.c\
/pcap-linux.c\
/savefile.c\
/scanner.c\
/version.c
LOCAL_CFLAGS:=-O2 -g
LOCAL_CFLAGS+=-DHAVE_CONFIG_H -D_U_="__attribute__((unused))" -Dlinux -D__GLIBC__ -D_GNU_SOURCE
LOCAL_MODULE:= pcap
LOCAL_MODULE_FILENAME:= libpcap
LOCAL_LDLIBS := \
-ldl
include $(BUILD_SHARED_LIBRARY)
Then, you only have to type this command:
ndk-build -C <path-to-jni-direcotry>
That's all! Now, inside the libpcap directory, and in the path:
libpcap/libs/armeabi/ should have been created the file you want:
libpcap.so
Let me know if you have any problems,
Thanasis
Hi,
Thanks. Now I'm able to compile the libpcap.so.
using this .so I have compiled the jpcap-0.7 (C source fiiles) to generate libjpcap.so.
Then I have created my Sniffer Application on Android. I have added the jpcap.jar, jpcap.so and libpcap.so in the lib folder of my Application.
But when I call this line
NetworkInterface[] devices = JpcapCaptor.getDeviceList();
am getting the following runtime error:
FATAL EXCEPTION: main
java.lang.UnsatisfiedLinkError: getDeviceList
at jpcap.JpcapCaptor.getDeviceList(Native Method)
at com.example.snifferapp.SnifferApp.onCreate(SnifferApp.java:26)
at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047)
at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1611)
at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1663)
at android.app.ActivityThread.access$1500(ActivityThread.java:117)
at android.app.ActivityThread$H.handleMessage(ActivityThread.java:931)
at android.os.Handler.dispatchMessage(Handler.java:99)
at android.os.Looper.loop(Looper.java:123)
at android.app.ActivityThread.main(ActivityThread.java:3683)
at java.lang.reflect.Method.invokeNative(Native Method)
at java.lang.reflect.Method.invoke(Method.java:507)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597)
at dalvik.system.NativeStart.main(Native Method)
Click to expand...
Click to collapse
Can you tellme What is going wrong here ?
Thanks.
Vijay
Yes, I had the same problem with you when I tried to make a sniffing application
using another one known java wrapper of libpcap: the jNetPcap, and particularly
I couldn't get the devices through this call: Pcap.findAllDevs(alldevs, errbuf);
That's because, even if you have root privileges on the console of the phone, as
you have a rooted phone, you cannot raun an application as root. That's not possible.
You can do that, only if your application is signed with the key of the platform, that is
of the Android OS that runs inside your phone.. So, the only way is to built by yourself
the Android OS and put it into the mobile. And then you have to sign your application
with the key that you have used to sign the OS.
For more information you can look here:
http://stackoverflow.com/questions/5966603/jnetpcap-on-android-problem-with-findalldevs-method
Hi,
Thanks for your reply.
But its very confusing.
Can you tellme, Whether Its possible to run a client application into Android which can monitor the network traffic in the device by anymeans?
If then what are all the possible ways. (like jpcap, etc....)
My idea is to develop a simple client application. I cannot think of building the whole Android OS and loading it into each device.
Hope to get a reply.
Thanks,
Vijay
I haven't done it before, because I only experience with native
programs that do network monitoring..
I think there are two simple solutions here. The first one is what exactly
Shark does: A tcpdump is running in the background that produces
traffic traces (pcap files) and you can develop an application that in periodic
time intervals reads these files and produce some outputs to the user.
The other one solution I can imagine is to develop again a native sniffer in
C with libpcap and then for each packet you receive or better for a batch of
packets you receive, you can send it through sockets to you application for
further processing..
Hope that helps..
FYI: There is a new application in Android called faceniff that does the work of
firesheep. That is you can hijack web sessions from facebook users. How is it
possible this application to monitor the web traffic of the phone? I think that
uses a native sniffer for this.. I am not sure, but it is not open source..
Hi, I did the steps as you described above:
Create a dir 'libpcap' with subdir 'jni'
Download the 'platform_external_libpcap' from 'github.com/android/platform_external_libpcap' (based on original libpcap version 0.9.8) and put the files at 'libpcap/jni'
Change the 'Android.mk' (see post number 6 of this thread)
run 'path/to/ndk-build -C path/to/libpcap/ndk' (android-ndk-r6)
When I do the last step of this list no 'libpcap/libs/armeabi/libpcap.so' will be produced but I get this output (I can reproduce this behavior on ubuntu 10.04 x86_64 and on debian i586):
> <user>@<host>:~/android/libpcap$ path/to/android-ndk-r6/ndk-build -C /home/<user>/android/libpcap/jni
> make: Entering directory `/home/<user>/android/libpcap/jni'
> SharedLibrary : libpcap.so
> /home/<user>/android/libpcap/obj/local/armeabi/objs/pcap//grammar.o: In function `pcap_parse':
> /home/<user>/android/libpcap/jni/y.tab.c:1711: undefined reference to `pcap_lex'
> collect2: ld returned 1 exit status
> make: *** [/home/<user>/android/libpcap/obj/local/armeabi/libpcap.so] Error 1
> make: Leaving directory `/home/<user>/android/libpcap/jni'
Does someone know what this error means and how to solve this problem?
daim0nas said:
Yeah!
Thank you Zuljin!!!
I put the libpcap direcotry into the android-ndk-r5b/samples, I modified a bit the Android.mdk
and the structure of the direcotry, so as to look like the other ones inside the samples dir and
I used the ndk-build command inside the android-ndk-r5b direcory:
ndk-build -C samples/android-ndk-r5b
All worked fine! I was able to produce a libpicap.so file, and put it in the phone using the
commands:
in android:
# su
# mount -o,rw remount /dev/block/mtdblock4 /system/lib
in my Desktop:
$ adb push libpcap.so /system/lib/
I made a simple sniffer, I compiled and linked with the libpcapp.so and works perfectly in
my HTC Hero!
Click to expand...
Click to collapse
Can you post your libpcap for us please.
I am attempting to compile Python along with the modules "openssl pil zope2" for Android using the "Python-for-android" project (https://github.com/kivy/python-for-android).
However it is not successful and errors out with the below error:
Code:
Getting distribution for 'zope.security==3.7.4'.
In file included from
/home/zac/Documents/Projects/Apps/python-for-android/build/hostpython/Python-2.7.2/Include/Python.h:58:0,
from src/zope/security/_proxy.c:19:
/home/zac/Documents/Projects/Apps/python-for-android/build/hostpython/Python-2.7.2/Include/pyport.h:849:2:
error: #error "LONG_BIT definition appears wrong for platform (bad
gcc/glibc config?)."
[B]#error "LONG_BIT definition appears wrong for platform (bad gcc/glibc
config?)."[/B]
^
src/zope/security/_proxy.c: In function 'init_proxy':
src/zope/security/_proxy.c:1006:3: warning: dereferencing type-punned
pointer will break strict-aliasing rules [-Wstrict-aliasing]
Py_INCREF(&SecurityProxyType);
^
error: Setup script exited with error: command
'arm-linux-androideabi-gcc' failed with exit status 1
An error occurred when trying to install zope.security 3.7.4. Look
above this message for any errors that were output by easy_install.
While:
Installing test.
Getting distribution for 'zope.security==3.7.4'.
Error: Couldn't install: zope.security 3.7.4
What I am wondering is if anyone else has ever had a similar issue when trying to use the Android gcc, I have build zope.security just fine using the ARM gcc so it is not a platform issue but some bug/issue with the provided Android gcc in the NDK
Code:
No private recovery resources for TARGET_DEVICE mako
host C: mkbootimg <= system/core/mkbootimg/mkbootimg.c
prebuilts/tools/gcc-sdk/gcc: line 40: prebuilts/tools/gcc-sdk/../../gcc/linux-x86/host/i686-linux-glibc2.7-4.6/bin/i686-linux-gcc: No such file or directory
make: *** [/home/karishnu/android/omni/out/host/linux-x86/obj/EXECUTABLES/mkbootimg_intermediates/mkbootimg.o] Error 127
real 2m7.172s
user 0m57.349s
sys 0m20.914s
[email protected]:~/android/omni$
I am using ubuntu 13.10.
What I have tried :
1. Reinstalling GCC and build-essentials
2. checked if i686-linux-gcc is present (it is)
3. resynced the repo many times
What I found :
mkbootimg.o is missing from the directory.
.................................................. .............................
Pls temme what to do. I have tried a lot to fix this problem but in vain. There are no other threads mentioning the same problem also.
HTML:
Docs droiddoc: /home/android/CM10/out/target/common/docs/api-stubs
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
make: *** [/home/android/CM10/out/target/common/docs/api-stubs-timestamp] Error 45
[email protected]:/home/android/CM10# Error occurred during initialization of VM
I try to build CM on VPS (it have 1 gb ram and one core cpu - only for test ). Can i build succesful CM on this machine?
refresh
I am attempting to build CM 12 for my phone as the latest prebuilts I could find were all for CM11. I am following the Cyanogenmod Wiki build guide for my phone and my build errored out thusly:
Code:
device/samsung/d710/selinux/system.te:2:ERROR 'unknown type system' at token ';' on line 11185:
allow system input_device:chr_file { read ioctl write open };
#line 1 "device/samsung/d710/selinux/system.te"
checkpolicy: error(s) encountered while parsing configuration
make: *** [/home/sarah/android/system/out/target/product/d710/obj/ETC/sepolicy_intermediates/sepolicy] Error 1
It seems odd that 'system' would be an unknown device type, and I haven't edited the file, this is all what downloaded automatically. What can I do to fix this?