Related
Hi guys!
I followed the procedure described on [RECOVERY] Rooting HTC One X+ | ClockworkMod Recovery 0.3 [16.11.2012]
i cant root on cmd
i have this message:
error: cannot load 'recovery.img'
anyone with same problem????
solution?
thank in advance
supercavio said:
Hi guys!
I followed the procedure described on [RECOVERY] Rooting HTC One X+ | ClockworkMod Recovery 0.3 [16.11.2012]
i cant root on cmd
i have this message:
error: cannot load 'recovery.img'
anyone with same problem????
solution?
thank in advance
Click to expand...
Click to collapse
Try TWRP instead. It is included in the all in 1 toolkit.
Sent from my HTC One X+ using Tapatalk 2
killman2659 said:
Try TWRP instead. It is included in the all in 1 toolkit.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
this procedure [recovery] twrp 2.3 19/11/12 AT&T AND INTERNATIONAL????
with manual installation?
i see there is a problem with different version
i got:
Software Number :1.16.401.6
baseband: 3.1204.168.32
Numero build: 1.16.401.6CL132116
does it work?
supercavio said:
this procedure [recovery] twrp 2.3 19/11/12 AT&T AND INTERNATIONAL????
with manual installation?
i see there is a problem with different version
i got:
Software Number :1.16.401.6
baseband: 3.1204.168.32
Numero build: 1.16.401.6CL132116
does it work?
Click to expand...
Click to collapse
downloade the recovery
renamed as recovery.img
execute the procedure
but still the same Error!!!
supercavio said:
downloade the recovery
renamed as recovery.img
execute the procedure
but still the same Error!!!
Click to expand...
Click to collapse
because it's obviously not in the correct folder or you havent got the drivers installed -.-
Lloir said:
because it's obviously not in the correct folder or you havent got the drivers installed -.-
Click to expand...
Click to collapse
I attach the image with the path and folder files
yes! i have drivers usb in the correct folder
(drivers updated cause i unlock bootloader and update SDK )
supercavio said:
I attach the image with the path and folder files
yes! i have drivers usb in the correct folder
(drivers updated cause i unlock bootloader and update SDK )
Click to expand...
Click to collapse
rename "recovery.img.img" in recovery.img
(in Folder settings from Windows: uncheck: Hide extensions for known file types)
supercavio said:
I attach the image with the path and folder files
yes! i have drivers usb in the correct folder
(drivers updated cause i unlock bootloader and update SDK )
Click to expand...
Click to collapse
now downloading and installing HTC drivers on this
and try again
chrigel2000 said:
replace "recovery.img.img" in recovery.img
Click to expand...
Click to collapse
ok didnt see incorrect nane :silly:
and try again
supercavio said:
ok didnt see incorrect nane :silly:
and try again
Click to expand...
Click to collapse
seem at the and
its working
reboot
or
reboot bootloader?
hi guys can anyone guide me to root the gingerbread mt6575?
Please!
touseefiqbal said:
hi guys can anyone guide me to root the gingerbread mt6575?
Click to expand...
Click to collapse
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
solution
jheysonamc said:
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
Click to expand...
Click to collapse
install usb vcom drivers first
i think i have found.. download mtkdroid tools and sp flash tool put usb debugging mode on and connect through usb and run mtkdroidtools when it detects then click on block maps i think.... now a table open click on create scatter... now scatter created...open sp flash tool..load scatter click on read back then double click on first page-only now choose page only then on lenght give the chache address from scatter when done click ok... take the battery out and connect your mobile through usb without battery.now click on read back when its done then tell me
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Avvio 760 Root!!!
Ronny927 said:
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Dont Work Help Me!!!
hey
jheysonamc said:
Dont Work Help Me!!!
Click to expand...
Click to collapse
i tell you something why you didnt follow it?
jheysonamc said:
Hello, I am looking for a solution, but can not find. I could not rooting my Avvio 760 mt 6575 with Android 2.3.6 Gingerbread. PLEASE HELP!!! :crying:
Click to expand...
Click to collapse
Give some more details about ur phone, I can help u to root.
Sent from my A2 using xda app-developers app
touseefiqbal said:
hi guys can anyone guide me to root the gingerbread mt6575?
Click to expand...
Click to collapse
Download root genius for pc
Open it with administrator rights and root
Hi guys. Please help someone. Where can I download the factory firmware? Not available in the system since the downgrade AiO R5A. Just by skipping the wifi or mobile election I get after each restart. The recovery work, but one could not install firmware as update.zip. You'll have to do something, or take it in for repair?
kolbaszmen said:
Hi guys. Please help someone. Where can I download the factory firmware? Not available in the system since the downgrade AiO R5A. Just by skipping the wifi or mobile election I get after each restart. The recovery work, but one could not install firmware as update.zip. You'll have to do something, or take it in for repair?
Click to expand...
Click to collapse
See my signature for current list of ota updates and older links.
stifilz said:
See my signature for current list of ota updates and older links.
Click to expand...
Click to collapse
please help me SGPT131E2 / S Sony Xperia S Tablet is installed. Which firmware to do this? Thank you for your help.
.....
I tried a few times but still in the "Verifying update package ..." first trimester getting "installation aborted" message and aborts the installation.
kolbaszmen said:
please help me SGPT131E2 / S Sony Xperia S Tablet is installed. Which firmware to do this? Thank you for your help.
.....
I tried a few times but still in the "Verifying update package ..." first trimester getting "installation aborted" message and aborts the installation.
Click to expand...
Click to collapse
After update fail use adb pull /tmp/recovery.log
Then post it here
stifilz said:
After update fail use adb pull /tmp/recovery.log
Then post it here
Click to expand...
Click to collapse
I'm sorry, but to me that's high. The temp directory is empty, there is no recovery.log so I can not write here
--------
in recovery write - 0123456789abcdef recovery
normal boot - list of attached
---
"/tmp/recovery.log does not exist"
kolbaszmen said:
I'm sorry, but to me that's high. The temp directory is empty, there is no recovery.log so I can not write here
--------
in recovery write - 0123456789abcdef recovery
normal boot - list of attached
---
"/tmp/recovery.log does not exist"
Click to expand...
Click to collapse
In recovery after an update fails wait 1 minute and use adb pull /tmp/recovery.log
/tmp is only there in recovery in normal boot it is /cache/recovery/last_log
BTW normal boot - list of attached means that your driver is not properly installed in normal boot, although it installed in recovery.
I thik yours is Spain model ES? Therefore you should need that update
SGPT131E2/S (in Hungary)
I do not understand, does the recovery mode, the switch-off function, and that
kolbaszmen said:
SGPT131E2/S (in Hungary)
I do not understand, does the recovery mode, the switch-off function, and that
Click to expand...
Click to collapse
Ok then. With the tablet ON and running normal. Use a file explorer to open /cache/recovery/last_log then move that file to your PC. Then rename it to last_log.txt and copy and paste the text here.
stifilz said:
Ok then. With the tablet ON and running normal. Use a file explorer to open /cache/recovery/last_log then move that file to your PC. Then rename it to last_log.txt and copy and paste the text here.
Click to expand...
Click to collapse
The problem is that there is nothing, just SGPT13 of a blank
kolbaszmen said:
The problem is that there is nothing, just SGPT13 of a blank
Click to expand...
Click to collapse
Okay. We will try this another way. Can you copy the text from the /vendor/vendor.prop file
stifilz said:
Okay. We will try this another way. Can you copy the text from the /vendor/vendor.prop file
Click to expand...
Click to collapse
not allowed to copy anything there
kolbaszmen said:
not allowed to copy anything there
Click to expand...
Click to collapse
Or copy the file (vendor/vendor.prop) to PC then rename to build.txt instead of build.prop
stifilz said:
Or copy the file (vendor/vendor.prop) to PC then rename to build.txt instead of build.prop
Click to expand...
Click to collapse
ok, and now?
------
copied to the SD card, but it failed to update
----
SGPT13
If I click on the property, it is
SGPT13
build TISU0143
sn 00000000000000000000000000000876
::::::::::::::::::::::::::::::::::::::::::::
may be that the Tablet S 3G firmware installed R5a for me is the Xperia Tablet S
The whole story started JB, and with motochopper root and install Flasher R6B with 3G, but there was no network. Here have been trying to somehow bring back if you manage to get a factory upgrade, but since there was no pile of failed JB managed to put together but that did not work properly, as there was only wifi, and the update did not go because, according to the latest software on it. Then I went down to the R5A 4.0.3 3G, but that might have been on the Tablet S, and it is not Xperia.
any suggestions ?
Hi there...
Need root Alactel pixi 7 (i213)
Android is 4.2.2 with stock rom
chip mt8127
I tried every root-ing software i found ..and no luck..
cant save scatter file by mtkdroidtools
there is no much information in net..so i dont know what to do...
there is way to flash cwm-recovery from fastboot..but im scared so i want first to backup stock recovery
sry for bad english
HELP:crying::crying:
I213
I am in same situation, cant find root solution for pixi 7.
Model:I213
Android version: 4.4.2
Kernel: 3.4.67
Build number: 01001
If anyone have some information please share..
Thank you
dunpeall said:
I am in same situation, cant find root solution for pixi 7.
Model:I213
Android version: 4.4.2
Kernel: 3.4.67
Build number: 01001
If anyone have some information please share..
Thank you
Click to expand...
Click to collapse
I just found some method to dump stock recovery by sp flashtool
and then flash cwm.so we can install root...
I will post later
Xcore_Rj said:
I just found some method to dump stock recovery by sp flashtool
and then flash cwm.so we can install root...
I will post later
Click to expand...
Click to collapse
Still waiting
dunpeall said:
Still waiting
Click to expand...
Click to collapse
I DID IT .... HAHAHAHAH
man have you ever flashed something with sp flashtool ??
you just need to flash one image..i made it by myself and guess? ITS WORKED
great
Xcore_Rj said:
I DID IT .... HAHAHAHAH
man have you ever flashed something with sp flashtool ??
you just need to flash one image..i made it by myself and guess? ITS WORKED
Click to expand...
Click to collapse
Not with sp flashtool, only with Odin.
So what's the magic trick ? Can u provide me more details.
Thank you
detail
dunpeall said:
Not with sp flashtool, only with Odin.
So what's the magic trick ? Can u provide me more details.
Thank you
Click to expand...
Click to collapse
Yep :good:
Its just too long story
The Main trick is that we are dumping system partition
Then opening it in linux ..installing su manualy..and reflashing
i can make detailed guide if you want
Now im trying to find custom recovery..and again problems
Xcore_Rj said:
Yep :good:
Its just too long story
The Main trick is that we are dumping system partition
Then opening it in linux ..installing su manualy..and reflashing
i can make detailed guide if you want
Now im trying to find custom recovery..and again problems
Click to expand...
Click to collapse
If u can that would be awesome
thanks again
dunpeall said:
If u can that would be awesome
thanks again
Click to expand...
Click to collapse
can u get 2 files from your tab?
/proc/dumchar_info
and
/proc/emmc
if we have same partition table then i will send you system.img for flashing it will much easy
Xcore_Rj said:
can u get 2 files from your tab?
/proc/dumchar_info
and
/proc/emmc
if we have same partition table then i will send you system.img for flashing it will much easy
Click to expand...
Click to collapse
Okm sorry for dalay. here's the files.
http://www.mediafire.com/download/3p6xq1lnvb8x85b/proc.rar
dunpeall said:
Okm sorry for dalay. here's the files.
http://www.mediafire.com/download/3p6xq1lnvb8x85b/proc.rar
Click to expand...
Click to collapse
:good:
so first off all create backup of your system partition.
sp flash : https://mega.co.nz/#!HxcBST4A!TjjbUVq_cZjMMcgIsxtm7rrlKCKgdXujx62ShlnoDyY
1. open flash tool
2. go to download
3. scatter-loading select 8127_blabalbalba.txt , (scatter is in flash tool folder)
4. go to readback
5. select Add
6. double click on added line
7. save as system.img
8. Type : hex , Region EMMC_USER , start : 0x32180000 , lenght 0x22600000 , ok
9. selcet Read Back
10. turn off tab and connect to Pc - it will start download
11. wait for end and disconnect from pc
Then emmmm
download system.img : https://mega.co.nz/#!i9FnGBqY!glbZXPA_me6wmrTowZZEa3-37bO2mAeuzHQuzXov3Wg
again open flash tool , load scatter
1. in download tab uncheck all fields .. ALL fields
2. select only Android
3. click on loclation and select downloaded system.img
4. select download , turn off tab and connect to pc
5. i think thats all
i will wait for reply : D
Xcore_Rj said:
:good:
so first off all create backup of your system partition.
sp flash : https://mega.co.nz/#!HxcBST4A!TjjbUVq_cZjMMcgIsxtm7rrlKCKgdXujx62ShlnoDyY
1. open flash tool
2. go to download
3. scatter-loading select 8127_blabalbalba.txt , (scatter is in flash tool folder)
4. go to readback
5. select Add
6. double click on added line
7. save as system.img
8. Type : hex , Region EMMC_USER , start : 0x32180000 , lenght 0x22600000 , ok
9. selcet Read Back
10. turn off tab and connect to Pc - it will start download
11. wait for end and disconnect from pc
Then emmmm
download system.img : https://mega.co.nz/#!i9FnGBqY!glbZXPA_me6wmrTowZZEa3-37bO2mAeuzHQuzXov3Wg
again open flash tool , load scatter
1. in download tab uncheck all fields .. ALL fields
2. select only Android
3. click on loclation and select downloaded system.img
4. select download , turn off tab and connect to pc
5. i think thats all
i will wait for reply : D
Click to expand...
Click to collapse
I backup created but for some reason i cant download system_rooted.img from mega.co.nz.
Do you have some other link?
dunpeall said:
I backup created but for some reason i cant download system_rooted.img from mega.co.nz.
Do you have some other link?
Click to expand...
Click to collapse
I will upload another one
Xcore_Rj said:
I will upload another one
Click to expand...
Click to collapse
Ok, thank you... I am waiting
dunpeall said:
Ok, thank you... I am waiting
Click to expand...
Click to collapse
sry for delay
here it goes : http://1drv.ms/1tIAD2y
Xcore_Rj said:
sry for delay
here it goes : http://1drv.ms/1tIAD2y
Click to expand...
Click to collapse
Stuck at alcatel onetouch pixi 7 logo :|
dunpeall said:
Stuck at alcatel onetouch pixi 7 logo :|
Click to expand...
Click to collapse
oops
i just saw that your Build number is 01001 mine 01002
i think thats the problem..
so i have 2 solutions
1st
try flash boot.img same way as system..uncheck all select only bootable and select boot.img
2nd
flash your backuped system and try OTA update to 01002 then try again...
boot.img : https://mega.co.nz/#!T80ihQAA!wiofxhYpc_5sfrKpUYIINSU-Vzb7vFqENI1EbaPyT-0
dunpeall said:
Stuck at alcatel onetouch pixi 7 logo :|
Click to expand...
Click to collapse
hey if you didnt started yet backup boot.img
start : 0x1d20000
lenght : 0x60000
Xcore_Rj said:
oops
i just saw that your Build number is 01001 mine 01002
i think thats the problem..
so i have 2 solutions
1st
try flash boot.img same way as system..uncheck all select only bootable and select boot.img
2nd
flash your backuped system and try OTA update to 01002 then try again...
boot.img : https://mega.co.nz/#!T80ihQAA!wiofxhYpc_5sfrKpUYIINSU-Vzb7vFqENI1EbaPyT-0
Click to expand...
Click to collapse
Flashed boot.img and system_rooted.img ... It's working and have root access cheers..
but in about tabler.. build number is still the same 01001.
thanks
dunpeall said:
Flashed boot.img and system_rooted.img ... It's working and have root access cheers..
but in about tabler.. build number is still the same 01001.
thanks
Click to expand...
Click to collapse
Well Enjoy
I've installed a pre-rooted .575 and now I need to instal TWRP recovery I need help
See this post: http://forum.xda-developers.com/xperia-z2/general/rom-xperia-z2-d6503-custom-23-5-0-575r3d-t3383257
It will help you
VampireK99 said:
I've installed a pre-rooted .575 and now I need to instal TWRP recovery I need help
Click to expand...
Click to collapse
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Do you have recovery?
michel090428 said:
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Click to expand...
Click to collapse
Flash abricot kernel:
http://forum.xda-developers.com/xperia-z2/orig-development/kernel-abricot-kernel-v3-t2965480
twrp 3.0.2 included, working
cant install recovery
michel090428 said:
Follow the instructions in this post using a PC:
http://forum.xda-developers.com/showpost.php?p=66232079&postcount=376
Click to expand...
Click to collapse
I have the same issue can install recovery after flash pre root zip .575
i have follow instruction and check the file you state before but there seem doesnt exist. what should i do to install recovery back? please help
PierceSirens said:
I have the same issue can install recovery after flash pre root zip .575
i have follow instruction and check the file you state before but there seem doesnt exist. what should i do to install recovery back? please help
Click to expand...
Click to collapse
what error are you having in the command window. please copy paste the text.