Tuesday night I loaded CM7, and then the Market wouldn't update my apps so I decided I would restore BAMF 1.5. After doing so, the Market just gave me "Fails" trying to update, and I could not access recovery, as I was going to do a complete wipe and reflash. Most of Wednesday, an extremely helpful & knowledgable member, Mattgyver83, tried diligently to help me rectify the situation, but to no avail. We tried to Fastboot, tried flash_image, tried fix permissions...shoot, I practically wore out adb..anyway, I ended up reverting back to stock and unrooted. I used jcase's method to revert back to stock, and that was painless, and successful. I decided last night to try rooting again, thinking a fresh root would solve my issue of not being able to access recovery. Root was successful, but I still cannot access recovery, through rom manager, or through bootloader. When I attempt it my Tbolt goes to white HTC screen, and stays there. All functions of my phone now work, and all aspects of root work, except I cannot flash anything. Rom manager shows I have clockwork recovery, but I just can't get to it.
Sorry for the long ramble. If anyone has had this issue, or if anyone knows a fix, I would appreciate it. Otherwise, I wait for Gingerbread.
Thanks
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
travishamockery said:
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
Click to expand...
Click to collapse
Tried that, but thanks. Still just goes to white HTC screen, and stays there until I do battery pull.
jr4000watts said:
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
Click to expand...
Click to collapse
I can get to bootloader, just not able to get into recovery.
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
monolithic said:
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
Click to expand...
Click to collapse
Thanks, but that didn't work. I think something in my os got lost when I restored BAMF from CM7.
Yea I spent a good few hours yesterday trying to help Orio out and we attempted a ton of things to try and fix the recovery issue, this post should offer a bit more insight to the methods used, this is running off memory;
adb reboot recovery failed
Reinstall latest Rom Manager apk and Flash CWM
flash latest rom manager via fastboot (CWM only)
(fastboot flash recovery /sdcard/recovery-clockwork-3.0.2.5.img)
**did not do fastboot erase recovery first**
"return to stock safely and properly" XDAthread by jcase
return to stock image [RUU], reroot, try again
try to boot into recovery via hboot
manually installed fix_permissions.sh script and busybox on rooted stock, ran.. didnt fix
tried to see if flash_image method would work, didn't
All of the above have failed and we basically tried almost all combinations. Not once would this phone get back into recovery, even after flashing the appropriate RUUs which include either stock android or CWM recovery. The only thing we have not currently attempted which might be the last thing left is to do is manually install the nandroid.sh script and do an advanced restore of the recovery image only from a nandroid backup on SD. I would rather not go down this method as it could have an undesired result, I have done it to restore a G1 back in the day but not 100% if its gonna work on a tbolt. Thankfully his phone boots, and we can get into hboot, but yea.. pretend recovery just doesnt exist at all...
Curious if anyone has any knowledge above what we have already tried.
monolithic said:
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Click to expand...
Click to collapse
I recall the same thing and its a good thought however that was mostly a generic error due to a CWM update and CM6 (I think) but either way flashing an RUU should override this shortcoming and im pretty sure that issue was worked out in CWM as well.
Not to be rude, but I don't think this question belongs in the development section.
Orio56 said:
I can get to bootloader, just not able to get into recovery.
Click to expand...
Click to collapse
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
hogowner said:
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
Click to expand...
Click to collapse
Thanks, but no, I deleted that after loading it. I actually reverted back to stock/unrooted last night and rerooted and the problem still remains. It's quite strange.
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
shelooga said:
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
Click to expand...
Click to collapse
That is what I was going to suggest. In ROM Manager at the very bottom try and flash an older version.
Sent from my ADR6400L using XDA Premium App
SUCCESS !!!
I fixed it !
Apparently, when I loaded up cm7, files showed up about the same time on my sdcard in clockworkmod download file. I deleted those files, and reflashed clockworkmod in rom manager, (which this time took like 3 - 4 minutes), and rebooted into recovery and it worked...did it again, just in case it was a fluke and it worked.
All is well now...the planets are realigned !!!
Thanks everyone for your ideas and especially thanks to mattgyver83 who helped me for something like 4 hours yesterday. Exceptional kindness !!
mods...you can close this thread.
GREAT NEWS!!!! CONGRATULATIONS!!
THANKS FOR REPORTING BACK!
This may help out other members with the same problem!!
now go ahead and start playing with your T-BOLT again!
That's a very odd solution. My first two things to try would have been:
1) fastboot:
fastboot erase recovery
fastboot flash recovery C:\some\local\path\recovery.img
You can't, well, probably shouldn't, flash a recovery from the /sdcard. When in fastboot mode I don't think the sdcard is even mounted. Either way, I think fastboot needs the img file on the local file system.
2) Create a PG05IMG.zip file with the recovery.img file in it, and flash that through HBOOT. Although this should have been done in some form or fashion when you downgraded or re-rooted, so YMMV.
Related
Ok, this is my first post so be gentle. I tried to root my sons phone and now it's useless. I went thru HTC's website to unlock bootloader due to having HBOOT 1.5. I'm unlocked and thinking life is good but, I loaded several different ROM's and get the same result. It starts to load the ROM and reboots, sometimes it goes into a safemode with the Viper Rom. I've been jacking with this for 2 days and need some help. I can't find a good link for the RUU or PG86...bla bla bla, I would take it back to stock and surrender but, can't even do that. I've installed TWRP and CWM, just to try different stuff, but get all the same reults.
I think you need to flash the boot.img separately. I'm not sure though. There's a thread for flashing with 1.50 somewhere in the development section
We're comin from a pure power source.
I am having the same issue here, I installed several ROMS, it works for a day, but then the reboot attack starts. Constant lockups and random restarts, sometimes 3 reboots in a row.
ROMs I tried to flash:
1. Xperia XE
2. Titan Trinity 3 HD
3. Nocturnal Adrenaline 1.0.2
Maybe it's the kernel, is there a list of kernels that I can flash?
This worked for me
My phone kept rebooting after root before, but I managed to fix it. This will only work if you can get into fastboot. Download the ruu file located here and run it while in fastboot. This will unroot your phone if you have S-On. After that is done, if it still loops, take out the battery and count to five, then put the battery in and hold the power button on the phone until the phone starts to turn on normally. That fixed my problem, hope it fixes yours. You may have to update after you get your phone started and you will lose all your data. Sorry about the link, I updated to one that has a working download.
armydude13090 said:
My phone kept rebooting after root before, but I managed to fix it. This will only work if you can get into fastboot. Download the ruu file located here and run it while in fastboot. This will unroot your phone if you have S-On. After that is done, if it still loops, take out the battery and count to five, then put the battery in and hold the power button on the phone until the phone starts to turn on normally. That fixed my problem, hope it fixes yours. You may have to update after you get your phone started and you will lose all your data. Sorry about the link, I updated to one that has a working download.
Click to expand...
Click to collapse
Unroot my phone?
Is it possible to re-root it?
Thanks all for the posts. I will give some of this a shot and see what happens. I can get to fastboot, and have loaded a couple of things thru the cmd prompt to try and help, but nothing so far. I'm not really sure if the kernel thing is what's stopping the roms for loading. I can't get the S-OFF, I'm unlocked. I can send anything I want thru the cmd prompt, and also flash zips thru twrp or cwm. Would like to start over but ca't even find a way to do that. Thanks again for the posts.
Cardmastr, we're on the same boat, pg86 takes forever to download, so as I'm waiting patiently, keep me in on the loop with what you're doing.
RUU didn't cut it, kept failing. have not found an image file to flash thru the cmd prompt. Still no luck. What can I throw into fast boot that might help me?????!!!!!!
When I started flashing after using HTC Unlock, I ran "fastboot boot recovery.img" - which booted TWRP with the necessary permissions. Then I wiped everything and flashed the ROM. Haven't had any issues with the ROMs I've tried.
Which recovery did you install? Twrp 1.1.1 is your best bet.
The 2.x version twrp or cwm do not okay nice with some phones.
S3nt from my 3D wond3rland
I used the TWRP 1.1.1. Might of messed up with some of the cmd prompt stuff I'm going back thru.
thefsfempire said:
When I started flashing after using HTC Unlock, I ran "fastboot boot recovery.img" - which booted TWRP with the necessary permissions. Then I wiped everything and flashed the ROM. Haven't had any issues with the ROMs I've tried.
Click to expand...
Click to collapse
Everyday is Halloween for u dude!! UR a Monster! This little tidbit hooked me up. Thanks to you we are back in game.
When installing a ROM, doesn't it wipe /data, /system, etc for us?
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737
Not the first post a noob really wants to make...but I've been searching the forums for an answer to my problem, but can't seem to find the info on the issue I'm having. I've seen some that were close & tried what was posted there without any success. I've checked out the Don't Panic -- Please Read First, includes troubleshooting guide Thread By: om4
A few days ago, I tried to install CM10 on my 4G LTE w/S-ON / HBOOT- 1.19. I was able to unlock the bootloader & install TWRP. Everything seemed to go okay until I rebooted my phone after installing CM10. It just hung on the Cyanogenmod splash screen. I tried re-installing it & kept getting the same problem. Today, I tried to install MeanROM ICS v6.5, but it keeps saying install failed. If I let the phone boot up, it'll hang on the MeanRom splash screen. I can still get into fastboot so I know it has to be a software issue. I've been beating my head against the wall for the past few days & just don't know how to fix it. Right now I have a very expensive paperweight. I'm hoping someone can help me fix this & get my phone back up & running.
TIA
for the millionth time
flash the boot.img seperately in hboot
Get (Flash Image GUI) off the Play Store.
If yr S-ON then u have to flash the kernel separate. That's why the ROM's keep hanging.
sent from my EVO LTE
http://forum.xda-developers.com/showthread.php?t=1772769&highlight=fastboot+gui
flex360 said:
for the millionth time
flash the boot.img seperately in hboot
Click to expand...
Click to collapse
I've been trying this all day, but must be doing something wrong. I found this: http://forum.xda-developers.com/showpost.php?p=29417266&postcount=1397, but was wondering if you might have more info on option 3.
TIA
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
popper668 said:
if you know how to Fastboot, go for it, but use the Boot.img from the ROM you are flashing.
Click to expand...
Click to collapse
It's the only option I have now, so I hope I can figure it out. Wish me luck. I know it's probably something stupid that I'm missing & it's driving me crazy. lol
For meanrom make sure you have twrp 2.2.2.0 or later to be able install. The kernel installer will force the phone to reboot upon first run, this is when the kernel installs. For cm10 or other aosp based roms be sure to properly wipe phone. Cache, dalvik, factory reset, and system. Fastboot the kernel using SDK, mini SDK, uniflash, or boot image flasher. Do not use clockwork mod recovery to install roms as it is known to damage internel storage and or misc partitions.
ADB Tools Mini SDK
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
buddahj said:
Thanks for all the info!!! I'm glad I found this place!!! I was able to get my phone working again. I found this post: http://forum.xda-developers.com/showthread.php?t=1937949 from back in October and found out that I was putting the boot.img in the wrong location. Once I fixed that, I have my phone back. Now I have to get it re-activated because I had to switch back to my Hero because I wasn't sure how long this would take. I hope Sprint will activate it even though is not stock anymore.
Click to expand...
Click to collapse
have your first thanks
lol
the thanks is for using the search function lol
Well now I have another small problem. When I try to use the camera or go into gallery, it says no external storage available. Looks like I'm off to search the forums again for a fix. I'm sure it's something minor.
It looks like it's the internal SD card. Under storage in settings it shows the external card's total space & the 3 GBs used for app data, ect...
When I try and mount the SD card, it says preparing card but doesn't do anything. I think I say something about changing something in TWRP.
Forgot to mention, I can't connect the phone via USB either.
Ha, fixed my SD card/USB issues by following the directions in this thread - http://forum.xda-developers.com/showthread.php?t=1812774
I could use some advice on any options I have for trying to salvage this Rezound. Here is what I know:
The Symptoms:
-Was completely stock and actively used phone
-Charging port began misbehaving. I believe it may be loose/damaged. It will only charge reliably on one particular USB cable (an Amazon Basics, but only one of my dozen or so of those)
-Started randomly rebooting
-Did a factory reset, seemed to help for a while, then it started rebooting again
-It started getting stuck in a bootloop. HTC screen up ~2s -> black ~0.2s -> HTC screen up ~28s -> black ~5s -> repeat. Does this for a variable amount of time, sometimes minutes, sometimes hours before it will actually boot all the way into the OS
-If it does boot, it usually does not last long before it reboots and will typically get stuck again
The Facts:
-I can into bootloader with no issues
-Because I can get into bootloader, I went ahead and unlocked and flashed TWRP 2.6.3.0
-I can get into TWRP and use all of it's functions reliably
-I decided to try wiping data and cache then system several times, flashing a custom ROM (Global_OTA_RED_DESENSED-v1.0) in TWRP and then flashed boot.img with fastboot, but the new ROM has the same issue. In fact I've yet to boot all the way into the ROM
-Does the same thing with the SD card and SIM card removed
My Guesses:
Based on the fact that it is rock solid in the bootloader and in recovery, I thought that it was possibly corruption on system or boot, which is why I tried to install a custom ROM. Now I'm leaning towards bad memory, either where system or boot reside, possibly data or even RAM, perhaps caused by electrical damage from the charge port issues. I just don't understand why I've not seen any sort of read/write errors while doing anything with fastboot or recovery.
At this point I don't know what to do beyond throwing it out. If anyone has any fresh ideas for salvaging this thing, I'd appreciate it.
If not, any ideas for replacing are also appreciated. A new phone isn't really in the budget at the moment, particularly because I desperately want to get away from Verizon (most likely will lose unlimited data if we I start swapping and don't really have $600-$700 to throw around at the moment. I have 4 lines to move and the Rezound line is on contract, so I'm sort of feeling the rock one side and a hard place on the other.
Thanks in advance, folks!
Because you are staying in ICS at the moment and not playing with JB/KK, try booting up Amon Ra recovery, it has an option to wipe/format the /boot partition (TWRP does not) so wipe that and everything else (except external SD) at lease twice... then, assuming you are on HBoot 2.28 and 0123/0124 radios, flash this and the boot image: http://forum.xda-developers.com/showthread.php?t=2260154 it is a completely stock build with full bloat, only root is added, and see if it comes up. This ROM is my go to ROM for issues when an RUU is not possible.
acejavelin said:
Because you are staying in ICS at the moment and not playing with JB/KK, try booting up Amon Ra recovery, it has an option to wipe/format the /boot partition (TWRP does not) so wipe that and everything else (except external SD) at lease twice... then, assuming you are on HBoot 2.28 and 0123/0124 radios, flash this and the boot image: http://forum.xda-developers.com/showthread.php?t=2260154 it is a completely stock build with full bloat, only root is added, and see if it comes up. This ROM is my go to ROM for issues when an RUU is not possible.
Click to expand...
Click to collapse
Thanks for the suggestion. I had let the phone sit turned off all afternoon to charge and tried this after work. I grabbed Amon Ra from http://forum.xda-developers.com/showthread.php?p=37362226, made sure to wipe boot in excess and installed the ROM you linked. It booted up on the first try unlike the last ROM, and I've been able to load some things on it and delete some bloat for a bit with no reboots. I've even powered off and went back into recovery to do a backup, and had a successful reboot afterwards. I don't know if it was wiping boot that did it, but I hope it holds. I'll keep you posted, and either way, thanks again.
Still going. Getting a random reboot here and there, but I've yet to have it get stuck while booting. Now I'm trying to decide if I want to take my chances and try to get S-off.
"Haus" said:
Still going. Getting a random reboot here and there, but I've yet to have it get stuck while booting. Now I'm trying to decide if I want to take my chances and try to get S-off.
Click to expand...
Click to collapse
Are you still on the stock ROM from above? You will need to unlock with Linux if you are, otherwise you will need a custom ROM (actually, an unsecure kernel) to use rumrunner for Windows.
acejavelin said:
Are you still on the stock ROM from above? You will need to unlock with Linux if you are, otherwise you will need a custom ROM (actually, an unsecure kernel) to use rumrunner for Windows.
Click to expand...
Click to collapse
I'm still on the stock ROM. Unfortunately it quit booting again.
"Haus" said:
I'm still on the stock ROM. Unfortunately it quit booting again.
Click to expand...
Click to collapse
Hmm... Honestly looking like a hardware issue... Sorry bro
Sent from my Nexus 4 using Tapatalk
I am rooted and S-Off. I am using the ViperOne custom ROM for my phone.
The end goal is for me to update my firmware, because my phone has an over 10 minutes boot time normally. (Not an exaggeration. I have actually timed it with a timer.) I read that in order to fix this, I should try to update the firmware by going to stock recovery and doing an OTA update.
My TWRP has worked flawlessly for me over the years, but for some reason it won't work anymore. It will hang on the boot screen for over an hour. After that hour, I assumed it's not slowly booting. (As a bit of background, recovery would boot quickly while my phone still had problems with 10 minute boot times).
Another piece of information is that the last time TWRP worked was when I used it to install .zip files from Titanium to get all my apps working. That worked perfectly fine, my apps got updated, and no trouble. I wish I could say what happened between then and now, but from what I can remember, I just used my phone normally, such as using web browsers and games. I don't remember messing with any system files.
I do know that ClockWorkMod recovery DOES work if I flash that, but my nandroids are all on TWRP. I have tried to flash different version of TWRP as well. It doesn't seem to matter which one I flash, my phone reacts exactly the same.
Another thing to note, I'm not sure if it's significant or not, is that when I got into hboot, I get the following message for a split second. I can't read the file names exactly, but I got the extensions. Then I get the normal screen with the vol instructions and choices to go to fastboot, recovery, etc... The message reads:
SD Checking...
Loading [(something).zip]
No Image!
Loading [(something).nbh]
No Image or wrong image!
Loading [(something).zip]
Loading [(something).nbh]
No Image or wrong image!
I hope this is a decent amount of information. I tried to include as much as I could, but if I'm missing any critical details, let me know and I will GREATLY appreciate your help!
have u tried to rewrite the image, download the new TWRP and load it via adb
Bradl79 said:
have u tried to rewrite the image, download the new TWRP and load it via adb
Click to expand...
Click to collapse
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Battletooth said:
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Click to expand...
Click to collapse
Having the exact same issue. Attempted to install twrp-2.8.6.0-m8.img using adb, but TWRP never loads. I can load prior versions but same results. Going to HBOOT I get a bunch of messages related to 0P6BDIAG.zip, 0P6BIMG.zip
and some .nbh. I think it's looking on my SDCARD for those.
If you're looking to update your firmware, you can use an official RUU to change the firmware of your phone. You can read more about it in this stickied thread in the general forum to see if it fits your needs. If you decide to do this, your phone will be completely stock after the RUU finishes running so use fastboot to flash TWRP (or whichever recovery you prefer).
Regarding the messages you see in hboot, it will always check for those files if you have an external sdcard mounted. If they are present, you will be given the option to flash the update. If not, you will get regular hboot access after the check. It is completely normal and nothing to worry about.