Don't buy this case!
It looks Great but will not fit our G-Tabs unlike
what the ad says.
The straps inside are too tight and will not fit around the corners.
The G-Tab is too thick. The cover doesn't close down all the way.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180646903537&ssPageName=ADME:X:AAQ:US:1123
Drat, Drat and Double Drat!!
PS The company returned my $$$ and I didn't have to pay shipping back
but the ad is still up.
Straps are ugly, anyways. I stuck 2 strips of velcro on the back (since it's staying in the case, anyway), and it's perfect. Nothing to block the face/buttons of the device, no leather bezel, etc.
Try this one: electroniccrap.com several of cases..
Mine Fits.
Meh, this is the same exact case that I got for mine but I bought it off of amazon. Fits great! The straps really don't cover any of the buttons (a little bit of the volume button) and once it's in it's not going anywhere, and the strap snaps tight. Overall, I'm pleased with it.
G-Tab Case
This is what I was going to use. Can CONFIRM GTAB fits PECTLY
http://www.shopping.hp.com/product/computer/categories/carrying_cases/1/accessories/CQ4647
Bought two gtabs and two of these very same "kindle DX" cases from amazom. The gtabs actually fit quite well in them. One of the straps presses slightly against the power button, but I've put some adhesive backed material around the button to prevent accidental pushing, so it's not an issue.
Related
I got the monaco leather case for the 8125 from Extreme PDA:
http://www.extremepda.com/page/XPDA/PROD/cingular_8125_accessories/CING8125FLIPCASE
Even though a lot of people said they liked it and it seemed to be the most ideal for constant use, the bottom line is after a week I can't stand having it on my 8125. Here's what I realized:
- Even though it allows the keyboard to slide out, actually holding the device with the case flip behind it makes it tough to type comfortably.
- Folding back the flip every time I get a phone call and securing it in place is not practical.
- The cover inadvertantly causes the phone to either ignore or answer calls by applying pressure on the dial/hangup buttons. While this isn't an issue if the device is in standy, on an incoming call it is. Locking the device is useless because on an incoming call, the phone buttons are unlocked even if the device itself is locked.
After a week of this I finally gave up and took the 8125 out of the leather case. I am worried about it getting dropped/scratched but I just can't find a solution that's practical enough. How are the rest of you dealing with these issues?
yeah most people forget that it's a phone too and not just a pda. so having it in a case like that just makes it more work to answer calls and use the device.
I'm using the Mobile Glove Executice Black Tie Series holder. its a better design than the free case that comes with the 8125. The flap has a magnet in it so it closes really good. I bought it at a mall stand for $30 http://www.mobileglove.com/mobileglove.html it's design for the Treo 650 and similar handheld devices. it fits perfect
I purchased this case and am very happy with it. I don't experience any of the issues described by devGOD. http://cgi.ebay.com/Deluxe-Leather-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've bought items from this person for other PDAs and highly recommend him. He also has some other cases for the 8125 available.
Geoffrey
Leather Cases
Hi there. The case listed above was my third case for the 8125. So far I like it the most. This is why I am still looking for a case. Taking it off and putting it on the belt clip is somewhat of a hassle because of the placement of the snap that keeps the thing closed. It gets in the way and it's making it hard to grab the phone in time to answer the ring. Also, using the keyboard is a little akward while it's in the case. Just take it out when at home but when out and about it gets a little tedious.
My next purchase might be the holster but at $30 it's a bit pricy.
Case to consider: Krusell Cabriolet
Here is what fit the bill for me.
http://sfplanet.com/product/87182
Use the phone/screen without any flaps. If you need to use the keyboard, it slides out easily. However, you can shake it upside down and it will stay put.
Krusell offers many choices for additional adaptors to fit your lifestyle. I bought and use their: Carabiner & Swivel Lanyard. I do like the belt clip one it came with - it is the easiest to remove that I've tried, but I don't like extra baggage around the waist.
Here is a link to a website that reviewed 8 cases.
http://www.4winmobile.com/htc-wizard-7-case-shootout-review-conclusion-vt1707.html
I'll look at one of those "deluxe leather cases" on ebay next. Just got a black metal PDAair case off ebay, trying it out. It's ok so far, not sure if it's a keeper. I'm used to having a metal case on my PDA, but I don't usually carry my PDA on my belt, so I'm not sure if I'll stick with it or go leather. I actually started to like the OEM pouch while I used it, but I want constant protection.
Has anyone tried the following case?
http://cgi.ebay.com/T-Mobile-MDA-PD...8QQihZ015QQcategoryZ15036QQrdZ1QQcmdZViewItem
out of my research, i'm beginning to believe that the case that offers the most protection, AND easy usage without much dabbling every time the phone rings seems to be:
http://cgi.ebay.com/Deluxe-Leather-...4QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
can anybody post saying otherwise? I'm curious to see if anybody has tried it.
I wish those had black stitching, but that case is most likely my next canidate if I try another one.
My black pdair metal case is doing ok, though I had my first drop today, the stupid stud unscrewed from the back of the case. I was kind of worried about that when I got it, the screw was awfully shallow.
The best case is no case
Hi there:
I read the 8 case review and, after doing so, I purchased the Noreve model. It is a beautiful case. The problem is, for me, that I use my 8125 primarily as a phone, and then as a PDA. I also use it a fair amount with a GPS device. For the phone, I find it most useful OUT of the case. Or, sometimes, when it is in my car holder, it is also out of the case. When using GPS, it is out of the case (but secure).
The Noreve is beautifully made, but the 8125 inside of it is like a brick. I find it 'geeky' to use the case with the phone. In fairness, what I like about the Noreve is that the case folds BEHIND the unit when you are talking and therefore does not hang down like a big dog's tongue. You can also use the keyboard in the Noreve, but the device is not that securely inside of it.
The case I use almost everyday is a case I found on eBay. I prefer the horizontal case, although I believe there is a vertical model. It covers the device well enough, has holes for you to push the device out of the case while on your belt when the phone rings, and then allows you to easily slide the phone back in. The belt is secure, and it is fairly light weight. I used to carry my old iPaq in my suit pocket. The 8125 is just too heavy; it works much better on the waist.
It is cheap but durable and it works!
http://cgi.ebay.ca/Cingular-8125-Po...2766581QQihZ014QQcategoryZ15036QQcmdZViewItem
Oh, BTW, that deluxe case is the same case Brando has.
http://shop.brando.com.hk/bwdopod838leathercase.php
i ordered mine tonight. Given the insane amount of research ive done, i'm definitely sure this one is going to be the one with the least amount of risk to try. I'll let you guys know when all is said and done.
Lex, I know what you mean about spending insanely long hours researching cases, as I just went through it. In a fashion uncharacteric of the way I usually work, I ended up buying four cases: Sena Form-fit, Krusell Cabriolet, Krusell Handit, and Piel Frama. The latter is the model with the strap that allows using the keyboard without removal from the case.
I read the 8-case review over and over, and still couldn't decide. The Krusells were cheap, so I bought two on Ebay for a total of $40. I found the Piel Frama on Ebay for $50. I decided to keep the Piel Frama and Handit. Here are some observations:
Sena Form-fit: Very well-made, but has one big flaw: The magnetic closure, which otherwise I like very much, causes the device to fall out if the case is inverted on the clip. In the first week the MDA fell out twice with no damage, so I sold the case. Also, the belt clip was backordered for a month, and I don't know if that has been rectified.
Krusell Cabriolet: Okay, but leaves screen pointing outward and unprotected; same for top. With the swivel clip I was worried it would fall out like with the Sena issue above. I was nervous using it, so I returned it.
Krusell Handit: Nice, inexpensive, well-designed, and no big flaws. I'm keeping it. I would recommend this one for an expensive case that works very well and looks good, but the keyboard is not accessible without removing the device. The swivel belt clip sticks out a bit and flops around on your belt, which is a minor irritant.
Piel Frama: Well-made, very nice looking and stylish, and another keeper. This will be my main case, but it has some flaws, too:
1. The card slots are directly over the screen (no problems so far). A moderate blow might cause the cards to touch the screen, but I'm not sure if that's a real concern.
2. The flip tends to trip the top-front buttons, but I usually put my device in standby before closing the flip, so this isn't usually a problem.
3. Earpiece connector is difficult to negotiate. The hole doesn't line up precisely and the flip is hard to snap when it is inserted. This isn't a major problem.
Virtues include accessibility to the keyboard by just removing a small strap. Best looking case I've seen.
I've decided there is no perfect case, and the only way to determine which is best for you is spend two weeks researching like I did. The 8-case review previously cited is a good start, and if you want a Krusell or Piel Frama keep an eye out on Ebay. The Piel Framas are hard to find, and from the manufacturers site in Europe they are $75, but show up on Ebay from time to time. I was emailed last week with an offer for one like mine from an Ebay seller for only $46 shipped, so if anyone wants a Piel Frama with the strap, let me know. It may still be available.[/b]
Just received the rooCASE Slim Fit from PC Micro via Amazon.com. Sorry, I can't yet post links, so the product title is: rooCASE Slim-Fit (Black) Folio Case Cover with Multi Adjustable Viewing Angles for Asus Eee Pad Transformer 10.1-Inch TF101 Android Tablet Wi-Fi.
I had been looking for a while for a case with clips that would leave the bottom edge open so that one could dock the tablet without taking it off, so I was excited to try it out. My initial feelings are very positive.
It's PU leather, so while not top grain, it's still pretty supple and smooth. The leather is also slightly padded, so the case is comfortable to hold. The reinforced edges are crisp and straight, so there's not a lot of give or bend. The interior is a soft, padded microfiber. The foam is pretty firm, so it seems like it might retain its shape fairly well.
Structurally, the tablet is held in by two clips on each side, one each holding the top corners (when in landscape) and the main clip about 2/5 of the way down each side. On the bottom corners, there are clips, but they're more like corner protectors as they're there to guide the tablet when the case is closed.
Setting the tablet in the first two grooves felt good. The furthest groove which puts the screen in the flattest position though doesn't hold very well. This is because the rounded back of the tablet near the edge doesn't let it sit all the way into the groove. This doesn't bother me though since I don't see myself wanting to use it that flat. It actually sits nicely on my lap in the middle groove, so it's nice to be able to prop up the tablet without having to rely upon the dock.
Speaking of which, swinging the bottom edge of the tablet away from the case allows it to easily connect to the dock. Before receiving the case, I wondered whether the clip that holds it closed would get in the way. In actuality, it props up the keyboard rather well -- the keyboard rests flat between being propped up on the clip and because of the way the dock hinge props up the rear of the keyboard. Alternatively, the case cover folds back out of the way easily as well, and kind of works to support the screen a little bit. This configuration is probably better suited for a desk vs. one's lap, but I'll have to experiment a little bit.
I'm interested to see how I like using it over time, but for right now, this case has potential. I was worried about the clips: whether they'd be too weak (they're not) and whether they'd prevent the case from folding flat (they don't). I like that they hold the tablet securely in place, without the need to have the bezel surrounded/covered by leather.
The overall look resembles a small notebook/portfolio and the branding is understated -- just an embossed rooCASE logo in the lower right.
It seems like the case will protect the tablet from accidental bumps and bruises, give it a sleek appearance and quench my thirst for a higher end case until Noreve or Piel Frama attempt to separate me from my money. We'll have to see how durable it winds up being -- right now, the surface seems to repel light scratches pretty well.
Overall, for $30 I'm pretty pleased. And it comes with a small capacitive stylus, that connects to the tablet via a small plastic plug that fits into the 3.5mm jack. Shipping was via USPS and took just two days from CA to the east coast.
Lots of pics to follow.
More pics.
Last two.
(I promise, Mods)
And to complete it all, here's the link: http://amzn.com/B0058DLAA8
Can't wait for mine to arrive!
Mine came in yesterday as well. I am extremely happy with it, I did not anticipate being able to dock it with the case on, so all the best. The bundled stylus from roocase is just the cherry on top!
damn thats nice
It's great news that there's finally a decent case that you don't have to remove in order to be able to dock with the keyboard. Hopefully more manufacturers start making cases in this design.
EDIT: Hmm I have a theory... if you buy one of those cases with velcro at the bottom, could you theoretically dock it without taking off the case by just unattaching the velcro? Can anyone confirm or deny?
Can you fold it up in the dock with the case on?
maxpower47 said:
Can you fold it up in the dock with the case on?
Click to expand...
Click to collapse
no
--------
This is the first case I have seen that uses clips to hold the Transformer, instead of a leather or fabric frame of some sort. I was beginning to think there weren't any out there. Thanks for the review.
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
SoundSurfer said:
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
Click to expand...
Click to collapse
Their are the same one from same factory. Just selling via different sellers.
xjarl said:
Their are the same one from same factory. Just selling via different sellers.
Click to expand...
Click to collapse
The Acase one is eligible for Amazon Prime. It can be in my grubby paws tomorrow.
Just received one.
I originally bought the regular multi-angle roocase version. As soon as this slim-fat was announced, I unloaded that one and pre-order this one.
They delayed the shipment for 1 week but refunded my $5 shipping charge (nice). I like this slim-fat version a lot. It's the best case I've seen (I need some protection, but I really hate to cover-up the beauty of the Tab).
Received mine today. I echo everything that the OP noted. Very nice and exactly what I was looking for.
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Thank you for the informative review. You may have just convinced me to buy a second case.
I already have this on order it shipped out yesterday so I'm hoping it arrives soon, and after your review and all the great pics. I hope it comes even faster now. Thanks for your time in making this, good info.
thaibruin said:
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Click to expand...
Click to collapse
I unfortunately do not have that kind of patience. Case ordered and overnighted. My TF will finally have a case that doesn't hide it.
Mine arrived today too. OP is spot on - this is a great case; clean lines, excellent fit and looks sharp.
There is no slot at the bottom to connect to the charger, so to charge it, I have to lay it face up w/ the cover open.
Hi all,
Here is my review of the Sikai leather/plastic case, as sold by Amazon. For comparison, I have had my Prime in the Poetic cover since I got it. It was okay, but didn't have a charging slot in the spine so it had to be open to be plugged in - plus the nearly-flat angle was nearly-useless because the cover kept slipping out of the tab you tucked it into. I had ordered the GreatShield folio case, but returned it because I didn't like the way the case gripped the tablet, plus I didn't like that to close the cover I had to put pressure on the screen to slide the clip past the edge.
Onto my review...
As mentioned in other reviews, it is a strange mix of black leatherette and dark brown plastic. The plastic back plate is great - the Prime snaps in and seems to be held quite securely. Similar to many iPad covers, it just wraps over the edge - enough to hold, but out-of-the-way enough to really reveal the sleek Prime look. The main portion of the back plate is the black leatherette material, with only the outer edge showing the brown plastic. It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
The leather-ish cover looks to be two pieces glued/sewn together, with two bends in the midde - allowing it to be folded up in a triangle shape. Both angles I tried seem to be reasonably stable while typing. About the two layers of the cover...they might have been able to get away with only one, giving it a sleeker appearance, but they had to account for the strap that slips over the sides to hold the cover against the screen. The strap is fine, and gives it an upscale look, but I would have preferred a more unobtrusive solution with magnets or something similar. Overall, the case is skinny enough - just about the same thickness as my Poetic case. That is actually a bit of a downer since I expected this to be thinner since the Poetic case has that layer around the bezel with the magnets in the corners.
There are a few tiny fit-and-finish things that I didn't expect to see in a $30 case. The leather part of the back plate doesn't always make a perfect fit with the plastic border. I'm really nitpicking here, but when this costs three times as much as my Poetic case, I was expecting Ferrarri-quality stuff. I know - it still only $30 so I won't beat them up (much) for it.
Overall, I really like the Sikai. It has a superior look to the Poetic - that one hid all of the nice features of the Prime underneath the protective layers of the front/back/cover. When all that is exposed is the center part of the screen, it almost doesn't matter anymore what Asus designed it to look like. The Sikai shows the Prime's lines and curves much better than the other cases I have seen. The plastic seems tough enough to not break or wear any time soon, so as long as the leatherette holds up, I say this is the best case available for the Prime under $30...
By the way, when ordering from Amazon, it ships from Hong Kong. I placed the order on June 18th, and got a confirmation within 24 hours that it had shipped. However, the confirmation email said my ETA was JULY 31st! Needless to say, I was very happy when it arrived today instead...
I figured there were already better pictures available than my crappy phone can provide, but I can take some close-ups of specific features if requested.
Thanks!
swordsman74 said:
It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
Click to expand...
Click to collapse
The dock works great with this case!
yeah I've had this case for a few weeks and its very functional. I really like how it doesn't cover the bezel on the prime like the sikai fiber case and you get multiple angles that actually work
My only complaints are that its a bit on the heavy side and because its designed to be put into the dock with the case on, the steepest angle isn't quite as steep as other cases because the flap slides out making the "hinge" not at the fold but an inch out
oh and the case is kind of ugly haha
Let's talk about the Spigen Snap On Case today... For those of you looking to buy this beautifully marketed case I would rethink your decision, but let me tell you exactly why first.
I purchased the case for my gf about two weeks ago and when it came in the mail I was stunned by how nice it looked and felt. The backing is smooth but has a slight texture to it, the case felt sturdy, and just like in the name snapped right on the phone perfectly. The only thing that bothered me was that it didn't fully cover the top and bottom.
So here we are two weeks later and the case has only had to endure 3 slight drops from about knee to hip height...
It's cracked on two corners with the corner closest to the camera button almost ripped all the way off and the corner closest to the power button poking your ear when the phone is in use. I've never seen a case that cost me $15+ break so easily, it's flaw is in it's sturdyness which is what seemed so attractive when I first inspected it and also in the corners which are the ends to the case. I believe if it fully encased the phone it would have faired a lot better.
So there you have it folks. My suggestion? Go with a TPU case, tried and tested these cases look, feel, and work beautifully. My only regret is that i could have gotten 2 TPU cases for the price i got the Spigen Snap On Case for.
Had this case also. Break within two days. The thin plastic strip above the volume buttons. Went with Otter Box Commuter. Just got it yesterday but so far really like it. Smaller and more compact then the defender.
Quick Review of the LK Luxury 360 case for the Note Pro.
http://www.amazon.com/gp/product/B00HQEGCH8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Pros: 360 portrait/landscape settings; Soft material over screen; "Smart" cover; 3 standing positions (exactly what I was looking for); Strap to hold cover shut.
Cons: Smelled like sewage/glue for a couple of days; Portrait mode is sort of a joke...The tablet's too heavy for it to stay standing in portrait.The actual fit of the tablet into the back of the case doesn't seem sturdy. While I'm confident it won't fall out at random, I know I need to treat it with care.
Overall: I love the standing positions in landscape. They're what sold me on this (plus it was the only one available at the time). I'm going to get a different case, unfortunately. I don't care for the necessity of the strap to hold the case shut. It's a good enough case until the one I really want comes out.
http://www.amazon.com/Exact-Buckler...33&sr=1-1-catcorr&keywords=exact+buckler+12.2 <- The one I should have waited for.
EDIT: It's been an additional two days since I got the case. Took it traveling around with me yesterday. Had to make a really abrupt stop to avoid an accident and my tablet went from the seat into the dashboard. The case protected the tablet all around and that made me happy. Also, the strap has grown on me..I use it as a pen holder for the 8pi I picked up. I'm thinking I'll go ahead and keep it for a while longer. It is starting to grow on me....Might not need to buy the other one after all.
EDIT2: It's been two and a half months since I purchased this case. During that time the leather on the rotating ring came apart and the back of the case tore across while I was writing on the tablet. The material covering the plastic clips that hold the tablet into the case also shredded down to bare plastic. This is all from very careful handling while at work and using it for a few hours an evening to read books. The case was a real piece of garbage. I ended up getting the MOKO case and it is fantastic. I posted about it in another thread and seems like a lot of people are also really enjoying the MOKO.