I was trying to install custom kernel, but something must have gone wrong.
Now I can not go to xrecovery, it boots normal, but when it starts up i can only see my battery and statusbar, but nothing in statusbar.
If i use SEUS it says i already have the latest software.
Is there anything else i can try ? i have no clue what else to try...
CoopZor said:
I was trying to install custom kernel, but something must have gone wrong.
Now I can not go to xrecovery, it boots normal, but when it starts up i can only see my battery and statusbar, but nothing in statusbar.
If i use SEUS it says i already have the latest software.
Is there anything else i can try ? i have no clue what else to try...
Click to expand...
Click to collapse
hy download and install Pc compagnion 2 and flash your phone that will be ok
but this is not a Q&A you are in dev thread pleas next time do not do this
cheerz
Achotjan
CoopZor said:
I was trying to install custom kernel, but something must have gone wrong.
Now I can not go to xrecovery, it boots normal, but when it starts up i can only see my battery and statusbar, but nothing in statusbar.
If i use SEUS it says i already have the latest software.
Is there anything else i can try ? i have no clue what else to try...
Click to expand...
Click to collapse
Wrong section, you should be in Q&A. Mods please move.
To answer your question though.
When using SEUS, choose the repair option when it says that your phone it up to date. It will then download and install the latest firmware for your device. Or better yet you can use FlashTool to reinstall the firmware and root the phone.
Flashtool thread http://forum.xda-developers.com/showthread.php?t=920746&highlight=flashtool
Wierd!
Well, you can always flash the x10 generic "ROM" with Flashtool.
Then your x10 will be just like when you bought it. After that you can just root it and add xrecovery again! You'll propably be on BB 54 when you do this, so I advice you to flash BB 49 or 52 with Flashtool also.
EDIT: Three posts in like a minute!
achotjan said:
hy download and install Pc compagnion 2 and flash your phone that will be ok
but this is not a Q&A you are in dev thread pleas next time do not do this
cheerz
Achotjan
Click to expand...
Click to collapse
Isn't it PC Companion?
Use Flashtool? That should help
On SEUS, Keep checking it for few times and then it will ask you to reinstall the current version
I hope this helps.
PS: wrong forum.
Flash
X10 is Die Hard man. Just flash the thing and it will be fine.
I could not use Seus because it keeps on saying i have the latest software.
Thank God and u guys for flashtool !
I'm restoring my ROM again, i will wait with custom kernel until there is a easier way to install it.
Thanx again
Related
hi There
PLEASE HELP ASAP I THINK IV BROKE MY BELOVED X10
Im new to all this Mod stuff and i have no experience at ....... But I LOVE this Theme i found , its amazing!!!!!! so i rooted my phone using super oneclick, i then found RECOVERY, also got the theme [X.Gbread for 2.1 Official ROM 2.0.2.A.0.24 + Battery Circle] [new-v0.6]
Installed everything it all and was great!! everything went smooth, but some things were missing on the theme like the new swipe button, the wallpaper, the new clock etc so...... i then installed a previous version [X.Gbread for 2.1 Custom ROM AOSP], thinking that version had the bits i needed and the later version i installed first was a add-on, and now the phone will not boot up, it gets past the Sony Ericsson but wont boot past the Nexus S Bootanimation, then it restarts itself, and starts all over again, i dont know what to do as i know NOTHING about flashing phones. PLEASE HELP
Phone specs - what i had before
X10i
2.1 Update1
build no. 2.0.A.0.504
Rooted with SuperOneClick
Also busybox
Many Thanks
Leon
************* update i can get the phone to the Xrecovery screen, ive tried reinstalling both of the themes but it gets to the lock screen and when the lock comes off, a box comes up with a triangle exclamation mark on it that says 'Weeks' on it and underneath it says "year" with a button that says "%1$s %2$s" and when you press it nothing happens apart from sometimes the writing year changes to years, after a minute it reboots and does the same thing.
does anybody know how i could sort this out???
Have i 'bricked' the phone?? if so what does that mean and can i sort it?? would i be able to send it in for repair??
or how i could i flash i back to the original SE theme, with out it starting up????
hopefully somebody can save me because at the moment i have not got a phone and i love my x10 sooooo much!!!!!!
i knew i should have just left it alone!!!!!!!!
Thanks Leon
i would recommend you to do
1. a full wipe using the recovery
2. re-install the theme u wanted. (perhaps u should re-download the theme u wanted)
btw, did u install using the option "install custom zip"?
if those above does not helps,
1. re-install the firmware using SEUS or flashtools from Bin4ry
http://forum.xda-developers.com/showthread.php?t=825201&highlight=flash.
2. root it and install xRecovery and then install the themes u wanted.
You'll have to really flash. The problem here was that you mixed up to FW (.24 & .504) when you installed the first theme... it clearly says for which version it is my friend....
So reflash to any ROM you want but check first the theme you're aplying and also if you have Xrecovery do a backup before any Mod so you don't have to reflash again...
Have fun you're not the first nor the last with this I've been there done that more than once....
Jim
Sent from my X10i
xcxa23 said:
i would recommend you to do
1. a full wipe using the recovery
2. re-install the theme u wanted. (perhaps u should re-download the theme u wanted)
btw, did u install using the option "install custom zip"?
if those above does not helps,
1. re-install the firmware using SEUS or flashtools from Bin4ry
http://forum.xda-developers.com/showthread.php?t=825201&highlight=flash.
2. root it and install xRecovery and then install the themes u wanted.
Click to expand...
Click to collapse
i was thinking a full wipe but im sure i read somewhere on this thread that it needs something to work like a basis program and cant work from nothing (sorry im not techinical) - if you think it will be best to do that then i will. oh and yes i did install using the option "install custom zip"
thanks
Leon
jimbo77 said:
You'll have to really flash. The problem here was that you mixed up to FW (.24 & .504) when you installed the first theme... it clearly says for which version it is my friend....
So reflash to any ROM you want but check first the theme you're aplying and also if you have Xrecovery do a backup before any Mod so you don't have to reflash again...
Have fun you're not the first nor the last with this I've been there done that more than once....
Jim
Sent from my X10i
Click to expand...
Click to collapse
thanks jim
how do i "reflash to any ROM i want" i need step by step instructions im a complete nooob!!!!! ive never flashed my phone before, I have xrecovery but unfortunately i never made a backup from my original SE theme. i will be doing from now on tho!!
thanks leon
leon_notts said:
i was thinking a full wipe but im sure i read somewhere on this thread that it needs something to work like a basis program and cant work from nothing (sorry im not techinical) - if you think it will be best to do that then i will. oh and yes i did install using the option "install custom zip"
thanks
Leon
Click to expand...
Click to collapse
I have done a full wipe then installed [X.Gbread for 2.1 Official ROM] from sd card.
I believe for my version no. 2.0.A.0.504 it came up with the same box as before, unable to get onto my homescreen but can see it in the background.
i dont know if i will be able to reinstall the SE firmware as it looks very complicated. im in England and it looks like i would have to use the Nordic software???? im not sure please could somebody let me know of any easier way of installing SE firmware back on???
thanks you so much for this
Leon
leon_notts said:
thanks jim
how do i "reflash to any ROM i want" i need step by step instructions im a complete nooob!!!!! ive never flashed my phone before, I have xrecovery but unfortunately i never made a backup from my original SE theme. i will be doing from now on tho!!
thanks leon
Click to expand...
Click to collapse
hi Jim
you sounded like you knew what you were taking about back then. i just wondered if you could help??
this is for this theme
http://forum.xda-developers.com/showthread.php?t=876226
I have done a full wipe then installed [X.Gbread for 2.1 Official ROM] from sd card.
I believe this is correct for my firmware version no. 2.0.A.0.504. it installed but it came up with the same box as before, unable to get onto my homescreen but can see it in the background.
i dont know if i will be able to reinstall the SE firmware as it looks very complicated. im in England and it looks like i would have to use the Nordic software????
im really lost and dont know what to do,
Have i now just wiped all the information off the phone???
can i put the SE Firmware on the Sd card and install from there???
also i take it i have not 'bricked' the phone??? i dont know what i means but i know its bad???
Thanks you so much for clearing some things up for me and helping me sort this mess out
Leon
do you know how to re install using sony ericsson update service (seus) ?
this method is easy.
1.switch off the x10 and waited for 5sec.
2.open the seus and follow the steps appear. *can be found here (http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=my&lc=en)
3. while plugging in the usb cable, press the 'back' button and release it when u have been told to do so.
xcxa23 said:
do you know how to re install using sony ericsson update service?
Click to expand...
Click to collapse
no i dont, i have tried it but it keeps telling me to connect my phone and mount it and it wont boot up so i cant do that.
is there another way i can do that? maybe put the file on my SD card? please help thanks
**********UPDATE it worked!!!!!!!!!!!!! THANKYOU SO MUCH!!!!!!!!!!!!
thanks i managed to re install using sony ericsson update service,
thank you all so much for your help,
will now try again but get it right this time!!!!!
Regards
leon
can u still enter xrecovery mode? if can, try this
based on wat jim said, u try to flash the 2.1 Official ROM version from SEMPITERNAL.
xcxa23 said:
can u still enter xrecovery mode? if can, try this
based on wat jim said, u try to flash the 2.1 Official ROM version from SEMPITERNAL.
Click to expand...
Click to collapse
thanks i managed to re install using sony ericsson update service,
thank you all so much for your help,
will now try again but get it right this time!!!!!
Regards
leon
great news. remember to choose the file according. perhaps you will like this theme too.
http://forum.xda-developers.com/showthread.php?p=9670843#post9670843
Hy guys.
I've installed Froyo Cyanogen 6.1.3 but my phone is freezing and rebooting.
i'd like to know how can I go back to rom 2.1.
Thanks all
flash it with seus
Can you explain it?
Sorry but i'm newbie.
alloha said:
Can you explain it?
Sorry but i'm newbie.
Click to expand...
Click to collapse
seus is sony ericsson update service.you need to first download this from the se product site.Once you install and open this application on your pc,the rest of the work is very easy and explained step by step.go for it.another thing---in future before you flash any custom rom,backup your virgin 2.1 using xrecovery so that you can always go back to this opening condition when you are troubled by the custom rom you have installed.
do press the thanks button if this helps you.
Ok, sathkartha.
I'll try it and remember to do the backup. Was my first time and i forgot to do the backup when i remembered was too late.If it works i'll post the result here and press the thanks button.
Thanks
sathkartha,
so, I've made it and followed the intructions and the message that came up for me was:
"No new software is available for your phone. Your phone already has the latest available software isntalled"
Do you have any idea what I can do from now?
Thanks
@alloha----on that screen itself,you will still see a prompt encouraging you to install--click that and move forward.
should I downgrade to 1.6 to seus works?
alloha said:
should I downgrade to 1.6 to seus works?
Click to expand...
Click to collapse
no need to and in anycase you cannot 'downgrade'!simply move forward from the message you have seen.
sathkartha said:
@alloha----on that screen itself,you will still see a prompt encouraging you to install--click that and move forward.
Click to expand...
Click to collapse
Sorry but it doesn't show to me.
I'll make some print screen and post here to you see. Ok?
Wait a minute!!! I think i'm on the way
you have to update seus or use PC Companion und update this sofware
flex96 said:
you have to update seus or use PC Companion und update this sofware
Click to expand...
Click to collapse
The SEUS's version is 2.11.4.11 the latest.
I was using the PC Companion and when it says to disconnect, turn off the phone and connect again the message that comes is: "there is no version. try again later"
am i doing something wrong?
alloha said:
Sorry but it doesn't show to me.
I'll make some print screen and post here to you see. Ok?
Click to expand...
Click to collapse
pc companion and seus are 2 different things.use seus only like i have explained.you will see the screen i have attached---click install and move forward.it is really simple.
sathkartha said:
pc companion and seus are 2 different things.use seus only like i have explained.you will see the screen i have attached---click install and move forward.it is really simple.
Click to expand...
Click to collapse
Thanks for the print, but it doesn't appear for me.
I'll keep trying. Any result i post here.
look at the screen which shows to me
shuold i put some archive in /system or /system/bin?
I think I see what the problem is here:
miniCM uses a modified build.prop so that neither SEUS nor PC Companion update the firmware at any moment,that's why your SEUS says that it doesn't have nay new software for you.
I'd say that instead of trying to go back to 2.1, rather try to do a clean install of any of the custom ROMs, and please do follow the instructions to the letter, most freezing and rebooting in custom ROMs happen due to not doing a factory reset before installing them.
@Akath19 i understand. I would like to go back to 2.1, make a backup and then install a custom ROM. Because I've tried to install a lot of time the custom ROM and this problem keeps boring me.
Talking about build.pro... there is some solution for it? like change this specific build.prob for another one that makes SEUS works?
ohh
you have to flash with the flashtool
because seus or other software couldn't flash it
sorry
Hello!
I got problem with my Xperia X10i, I don´t know what to do.
Just some few hours ago i installed:
[ROM] [29-07] TripNMiUI "Iris" 1.8.3 Froyo!
h t t p ://android.modaco.com/topic/342875-rom-29-07-tripnmiui-iris-183-froyo-heading-for-20/
And it worked perfect, But then after that i installed Free Kernel 3.63 with Xrecovery like the ROM with misstake..
Free Kernel 3.63
And now my phone wont work, It starts and works to the "lockscreen" but then after that a error message pops up and stands that the system process doesnt answer after i unlock and after that it restarts. And Xrecovery wont start after the "Sony Ericsson" text.
I dont know what to do, If my phone is broke or if this can be fixed!
But please can someone help me!? I would be Grateful forever! and sorry for my bad english!!!
- Have a great day!
Here is how you get back to 2.1
Go to this thread: http://forum.xda-developers.com/showthread.php?t=920746
Download the flash tool and the firmware you want and flash back to 2.1 and reinstall trip's miui rom.
Did you download the correct kernel for the rom you were using? http://forum.xda-developers.com/showthread.php?t=1112745 has 2 froyo kernels. One for froyo and one for Miui.
Good luck my friend
1. Try flashing a normal kernel via Flashtool, seeing if this is corrected
2. Reinstall xrecovery before FC ? via Flashtool
3. Reinstall via SEUS ?
How can install something when i cant get into Xrecovery or connect my phone to the computer? .. My phone only can charge. Or is it only me doing something wrong? .. Im pressing the back button when the "Sony Ericsson" Text is shown. I dont know what to do
Hadex94 said:
How can install something when i cant get into Xrecovery or connect my phone to the computer? .. My phone only can charge. Or is it only me doing something wrong? .. Im pressing the back button when the "Sony Ericsson" Text is shown. I dont know what to do
Click to expand...
Click to collapse
Again, go to this thread: http://forum.xda-developers.com/showthread.php?t=920746
Download the flashtool:http://www.multiupload.com/GYL7A7XQBT
and the 2.1 firmware:http://www.mediafire.com/?sqv6274anzfzn2x
Install the flashtool, put the firmware in the firmware folder and then follow the instructions in the thread.
This will wipe all your data and revert your phone back to 2.1. The flashtool can root and install xRecovery allowing you to install The miui rom again getting you back to where you were before you flashed the kernel.
Oh ok. ill try this! Thanks for the help. Sorry for understand directly.
Don't worry I just hope your phone gets up and running again soon!
ok so i have an x10. i rooted it succesfully with flashtool. i couldnt install xrecovery and i needed to know my version of busybox, so like a dope i turned the phone off and went to flash kernel downgrade in flashtool, so its like ive gone back 2 steps. but now, when i do the kernel downgrade, it discovers my phone but the root option does NOT APPEAR?!?! please help me
squarehead94 said:
ok so i have an x10. i rooted it succesfully with flashtool. i couldnt install xrecovery and i needed to know my version of busybox, so like a dope i turned the phone off and went to flash kernel downgrade in flashtool, so its like ive gone back 2 steps. but now, when i do the kernel downgrade, it discovers my phone but the root option does NOT APPEAR?!?! please help me
Click to expand...
Click to collapse
Can your phone still bootup correctly ? If yes try an older version of flashtool had this issue flash kernel upgrade turn on debbuging and unknown source and start from there
Sent from my X10i using xda premium
ive just used the repair phone in pc companion, will start again. damn!
squarehead94 said:
ive just used the repair phone in pc companion, will start again. damn!
Click to expand...
Click to collapse
Ok cool let me know the results
Sent from my X10i using xda premium
ok so got it re rooted, now i have a problem with installing x recovery... very similar story to this guy here. except mine did not install in the first place, but the error message and everything is the same, i get the same file already exists error and 2 read only errors and i have the same issue as this guy now.
http://androidforums.com/sony-ericsson-xperia-x10/371128-xrecovery-wont-install.html
Try doing force PSNeuter. I'm on my phone at the moment but when I get on the pc I can help you
Sent from my X10i using XDA App
Go to HERE and download Flashtool 0.4.2.0, with it, you can root, install xrecovery and unlock bootloader, if you wish.
You need have android 2.3.3, and don´t downgrade kernel.
If you want, install stock firmware.
It´s easy.
right, so do i just click install recovery?
because i rooted it, exactly like that, im running busybox version 1.8.4 or something like that, someone told me it automatically installed xrecovery when i rooted it... is this true? thanks
When you root phone with flashtool, it just root your phone. For install xrecovery you need click on install xrecovery, and when it over, you have xrecovery installed.
squarehead94 said:
right, so do i just click install recovery?
because i rooted it, exactly like that, im running busybox version 1.8.4 or something like that, someone told me it automatically installed xrecovery when i rooted it... is this true? thanks
Click to expand...
Click to collapse
Yes, you click the install recovery button. And no, when you root your phone, xrecovery is not added.
A little reminder also, you will never break the x10 by flashing to many times. So every time you run into something like accidentally downgrading kernels, just flash stock FW and start over. Again, the only true way for someone to permanently damage the x10 is only by damaging the USB port. So hold dear to that little port.
Hope you resolve your issue brah. Peace
is there anyway i can run flashtool and get it to recognise my phone without having to flash kernels?
and great, ill do that when i get in. if your on about 1700 gmt time, thatd be great.
thanks everyone, mucho appreciado!
squarehead94 said:
is there anyway i can run flashtool and get it to recognise my phone without having to flash kernels?
and great, ill do that when i get in. if your on about 1700 gmt time, thatd be great.
thanks everyone, mucho appreciado!
Click to expand...
Click to collapse
Not too sure what you're getting a that? Revise your question please.
its ok ive sorted now, thanks. dont know how to close a thread but this is sorted now, thanks guys!
Hello
I've installed the [ROM] MiniCM7-2.1.9 following this steps
i've previously installed a CWM
restart in recovery
wiped data/reset factory
wiped battery
wiped all ...
install Rom
install gapp
and now my phone doesn't goes to recovery and all i get is a black screen whit "Sony Ericsson" legend
please some help.
i post here, because i haven't permissions to post in the developer forum asking for help in the thread
sorry about my bad english
Did you unlock your bootloader using Flashtool?
You also need the latest version of nAa kernel installed.
Thanks for the answer
I didn't unlock my bootloader using Flashtool i haven't do that before and didn't read the installing instructions for doing that my fault
and didn't installed nAa kernel, because i think didn't need to install the kernel obligatorily
is anything i can do to solve this problem ??
You do need the nAa kernel to run MiniCM7, it just won't work without it. Next time you think about installing a rom, make sure you read all the instructions first. Especially if you're using custom kernels as that's a good way to give your phone a real hard brick.
What you've got is a soft brick. The phone still works, it just doesn't work as a phone. A hard brick is when your phone doesn't do anything at all. Which is bad.
All you need to do is download and use Sony Ericsson Update Service. This updates your phone to the latest, official firmware. If it complains that you already have it, choose the option to reinstall it anyway.
This will wipe all the data on your phone, but not your sdcard, so you'll lose your contacts, sms's, etc but you backed up anyway, didn't you?
thanks Ticklefish for the answer
i did that and now i've my phone back =D
Mine wont do that :-/
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
@niko5878..
which rom are u using?
may be i can help..
Niko5878 said:
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
Click to expand...
Click to collapse
Is your phone in download mode when you get that message? And is it SEUS you're using or PC Companion?
Sent from my U20i using XDA App
I am usin PC-Companion,
but after severals trys i made it work, so thats just briliant, you saved my smartphone
Awesome forum!
Thanks alot Ticklefish!
Yashu1019 said:
@niko5878..
which rom are u using?
may be i can help..
Click to expand...
Click to collapse
I think i was using the same as in this thread, that might e why it failed, but i'll just start rooting my phone now, and then wait and see
i'll just search around x10 forum to check out some tutorials, but thanks anyway