Thanks to doixanh, not me
here you go guys
X8 Forums
Now it have Game Mode, so you can do it, Instructions by doixanh:
Starting from v007, X8Gesture supports two gestures: Pinch Zoom and Game Mode. Default mode is Pinch Zoom initially after each reboot.
1. Game mode
To activate game mode, keep one finger at the bottom right and then another at the top left of your screen, one-by-one (don't release first finger).
Generally you should have more pressure with your second finger so that the digitizer recognizes it as the moving finger.
I tested with Tank Hero and it seems to work. This is not dual touch. It only makes you feel more comfortable with MT games. Sometimes it's incorrect though. That's the limitation of our hardware.
So it'll work nicely for our devices?
Just a little question: Could you make an update.zip of that v005?
Theshawty said:
So it'll work nicely for our devices?
Just a little question: Could you make an update.zip of that v005?
Click to expand...
Click to collapse
give me your hw_config.sh
D4rKn3sSyS said:
give me your hw_config.sh
Click to expand...
Click to collapse
The one I got on my phone will be v.004 of that module but where do I find my hw_config.sh?
Theshawty said:
The one I got on my phone will be v.004 of that module but where do I find my hw_config.sh?
Click to expand...
Click to collapse
/system/etc/hw_config.sh .. search it with rootexplorer, and then copy to your SD, and upload, this is just to make a update.zip that dont brick your phone
D4rKn3sSyS said:
/system/etc/hw_config.sh .. search it with rootexplorer, and then copy to your SD, and upload, this is just to make a update.zip that dont brick your phone
Click to expand...
Click to collapse
Ok, config's on its way.
Check attachments. It's zipped so just extract
Try first NOHWCONFIG, if it dont works, try the other one
if some of both works, dont forget thumbs up to me
D4rKn3sSyS said:
Try first NOHWCONFIG, if it dont works, try the other one
if some of both works, dont forget thumbs up to me
Click to expand...
Click to collapse
for mini CM 6 1.0.0 users , only use the nohwconfig to install this module (because it's an update of the one already installed )
= = > this module works perfectly ;-)
D4rKn3sSyS said:
Try first NOHWCONFIG, if it dont works, try the other one
if some of both works, dont forget thumbs up to me
Click to expand...
Click to collapse
i want this should i give you my file or can i just flash one of them ??
edit: i am on stock 2.1 but rooted...
If you come from v004, you can install nohwconfig
D4rKn3sSyS said:
If you come from v004, you can install nohwconfig
Click to expand...
Click to collapse
i think i am on v0000
if i flash it can i brick my phone or....?
faddys123 said:
i think i am on v0000
if i flash it can i brick my phone or....?
Click to expand...
Click to collapse
.. question is, did you have multitouch yet?, if not, install nowhwconfig, and add this lines to hw_config Manually!:
# dx: our modded touchscreen driver
insmod /system/lib/modules/x8gesture.ko
D4rKn3sSyS said:
.. question is, did you have multitouch yet?, if not, install nowhwconfig, and add this lines to hw_config Manually!:
# dx: our modded touchscreen driver
insmod /system/lib/modules/x8gesture.ko
Click to expand...
Click to collapse
so ill flash nowhwconfig and if theres no multitouch i will add that line manually and flash it again?
faddys123 said:
so ill flash nowhwconfig and if theres no multitouch i will add that line manually and flash it again?
Click to expand...
Click to collapse
yeah, but only add lines, no flash again
D4rKn3sSyS said:
yeah, but only add lines, no flash again
Click to expand...
Click to collapse
thanks but there is no multitouch i havr found the hw_config file do i open it with note pad or..?
edit: i have opened and the same lines are already there?
faddys123 said:
edit: i have opened and the same lines are already there?
Click to expand...
Click to collapse
You should have multitouch yet
EDIT: I mean dualtouch ofc
i already have 004..
so, i just copy x8gesture.ko to /system/lib/modules and replace the older file?
reboot required?
howzcat said:
i already have 004..
so, i just copy x8gesture.ko to /system/lib/modules and replace the older file?
Click to expand...
Click to collapse
Yeah exactly that, or install file nohwconfig.zip, on first page
i have dual touch 004, but my hw_config.sh doesn't have insmod /system/lib/modules/x8gesture.ko...weird? lol
should i add it too? reboot necessary afterwards?
howzcat said:
i have dual touch 004, but my hw_config.sh doesn't have insmod /system/lib/modules/x8gesture.ko...weird? lol
should i add it too? reboot necessary afterwards?
Click to expand...
Click to collapse
If you have not insmod /system/lib/modules/x8gesture.ko, and gesture is working, that means that your rom developer, addes that lines on ramdisk .. so you dont need to install anything, just flash the zip and enjoy (ofc you need reboot )
now cya guyz im gonna play assasins creed on my mimmi
Related
Is it possible to have a dual touch update.zip to flash directly through xrecovery for the stock rom... I am just unable to insmod or adb shell in anyway.... Thanks.
albanezi said:
Is it possible to have a dual touch update.zip to flash directly through xrecovery for the stock rom... I am just unable to insmod or adb shell in anyway.... Thanks.
Click to expand...
Click to collapse
This thread should go on Q&A, anyway, upload you hw_config.sh (with rootexplorer search /system/etc/hw_config.sh, hold pressed the file, and choose copy, then go to your sd and paste, and transfer it to pc, and upload it ofc )
yes, it is possible
I will try to do it
bitmovel said:
yes, it is possible
I will try to do it
Click to expand...
Click to collapse
and here it is in attachment
credits for the script goes to DooMLoRD xD
EDIT: new version here
bitmovel said:
and here it is in attachment
credits for the script goes to DooMLoRD xD
Click to expand...
Click to collapse
Wow, thk you so much!
please tell me if it works.
Yes it works! The only problem that it only works with multitouch visualiser 2, emulators and games... I can confirm that it does not work with the stock web browser, skyfire browser, stock gallery or google maps... Maybe you could fix this Bitmovel and post it on a new thread as a [TUT].
albanezi said:
Yes it works! The only problem that it only works with multitouch visualiser 2, emulators and games... I can confirm that it does not work with the stock web browser, skyfire browser, stock gallery or google maps... Maybe you could fix this Bitmovel and post it on a new thread as a [TUT].
Click to expand...
Click to collapse
copy this http://forum.xda-developers.com/attachment.php?attachmentid=587304&d=1304601821 to /system/etc/permissions
Thanks to teapea
ooops
D4rKn3sSyS is right (tks for the tip)
no need to install that file manually. I have just included it in the new xrecovery update file (in attachment)
just re-install it
It should now work in all appz
thank you guys, you are quite simply awsome! One very last question, will this work on the latest 2.1.1.C.0.0 build?
albanezi said:
thank you guys, you are quite simply awsome! One very last question, will this work on the latest 2.1.1.C.0.0 build?
Click to expand...
Click to collapse
I dont really know, but if 2.1.1.C.0.0 kernel and baseband are not the right one (2.6.29 and 015), won't work
D4rKn3sSyS said:
I dont really know, but if 2.1.1.C.0.0 kernel and baseband are not the right one (2.6.29 and 015), won't work
Click to expand...
Click to collapse
I haven't tested myself, but I assume it should work.
Same baseband and kernel were confirmed to be the same as 2.1.1.a.0.6 in some other thread
in fact, only a few files were changed.
I will compare both releases tomorrow. Maybe I can find why was that update made
I am suprised SE do bot publish changelogs with these kind of things... I'm guessing its something to do with stability or security.
I will try and put up a full and clear youtube video to show youtubers with X10 Mini Pro's around the world how its done next week as there are so many people on youtube looking for this, it will bring many more people to these forums and who knows they could become great contributers here.
bitmovel said:
ooops
D4rKn3sSyS is right (tks for the tip)
no need to install that file manually. I have just included it in the new xrecovery update file (in attachment)
just re-install it
It should now work in all appz
Click to expand...
Click to collapse
Awsum work mate.. was waiting for dual touch which could be flashed through xrecovery. Made my work easy.
It would be better if you could create a new thread on this.
Quick question: The new file you made was named "dualtouch_v006.zip" should this be renamed to "update.zip" or just run this file from xrecovery with its orginal name?
And will innstalling this throuhg xrecovery delete anything of the personal data on the phone?
Sorry aboute the bad English and aboute the silly questions.
You shouldn't rename it, just install it from xrec with original name.
keep the same name, and no. it will not delete any personal data.
Thanx "bitmovel".
Does this go for themes aswell?Do these not delete any personal data?
it does nothing else then adding multitouch.
it does not remove anything at all
Corrected
there is xloud for X10 big one working 50%
Try but make sure you do back up because I am a beginner
the problem was with the zip in the begining (SORRY)
instruction
build.prop
#additional build properties
add line : ro.semc.xloud.supported=true
then copy file using root explorer
sytem/etc/permission
com.sonyericsson.audioeffectif.xml file
system/lib/
libaudioeffect_jni.so file
system /etc/framework/
semc_audioeffectif.jar
system/app
audioeffectservice.apk
this are the files to makes it work!
using the damp
http://forum.xda-developers.com/showthread.php?t=1199310
big thanks for resoures
part 2 two
replace the setting, setting provider
reboot
sorry for quality
btw i am not retard there is aprove
marcoplo said:
there is xloud for X10 big one working 50%
Try but make sure you do back up because I am a beginner
Click to expand...
Click to collapse
tryed to flash it doasent work
WTF? Again these 50% things?
DON't flash this !! A dev should have a look into it, it seems to delete XREc !!!
marcoplo said:
there is xloud for x10 big one working 50%
try but make sure you do back up because i am a beginner
Click to expand...
Click to collapse
dude that is so lame... find your original promotion... 50% is allready taken by z
E cant chown/mod /system/bin/chargemon (no file or directory)
E failure at line 8
Set perm 0 0 0755 system/bin/chargemon
Install aborted.
Seems to be no contents in data. This is useless lol
NICE WORK BRO!
Sent from my X10i using XDA Premium App
pietropizzi said:
DON't flash this !! A dev should have a look into it, it seems to delete XREc !!!
Click to expand...
Click to collapse
Confirmed!!!!!!!!
Sent from my X10i using XDA Premium App
this is my first time. first, second, time does not work>> in third will work !!
IF YOU NOT TRY- WILL NOT GO ANYWHERE there have to be the first time
BTW I made correction
i got it 12.8% working
man if someone can really port this and give some volume to x10 it will be better than gb )
Would copying all these files make it work?
Where do you enable it from?
Do you have it working in the first place?
What's with the 50%?
I am really confused...
the xload is in the setting/ sound
yes need to to copy first then go to the setting/sound
marcoplo said:
system /etc/framework/
semc_audioeffectif.jar
Click to expand...
Click to collapse
It's /system/framework/semc_audioeffectif.jar
marcoplo said:
the xload is in the setting/ sound
yes need to to copy first then go to the setting/sound
Click to expand...
Click to collapse
Can we have a zip that works %100?
This doesn't work, I did everything right but I don't get the option to enable it in the Settings...
U set the corerct permissions and edit the build.prop?
Im curious about this :/
the option will not show up until you place
#additional build properties
add line : ro.semc.xloud.supported=true
find the and add the line on the right section #additional.. not at the end "build.prop" in system
My_Immortal said:
This doesn't work, I did everything right but I don't get the option to enable it in the Settings...
Click to expand...
Click to collapse
i'm no developer, but, i think you will also need the settings apk from the arc dump as well to get the option to work correctly.
Could you post a screeny to show :-D
svtfmook said:
i'm no developer, but, i think you will also need the settings apk from the arc dump as well to get the option to work correctly.
Click to expand...
Click to collapse
Or the X10 settings.apk will need editing to show the option. Maybe
Hello guys, i have this rom: http://forum.xda-developers.com/showthread.php?t=1504633 and i want to use exactly this type of keyboard: http://i.imgur.com/k4gII.png It's the most user-friendly keyboard! What should i do?
Rokriton said:
Hello guys, i have this rom: http://forum.xda-developers.com/showthread.php?t=1504633 and i want to use exactly this type of keyboard: http://i.imgur.com/k4gII.png It's the most user-friendly keyboard! What should i do?
Click to expand...
Click to collapse
Which device do you have ? The Mini or the Mini Pro ?
What I know is that you can use Suquasinputmethod with the mini pro, It could work too on mini, to confirm. It can be found on any GB rom in the right forum.
But you have to know that there is a bug with the symbols panel, it hang if totally slide up or down. To free it, you'll have to turn the device in landscape then back in portrait.
Rokriton said:
Hello guys, i have this rom: http://forum.xda-developers.com/showthread.php?t=1504633 and i want to use exactly this type of keyboard: http://i.imgur.com/k4gII.png It's the most user-friendly keyboard! What should i do?
Click to expand...
Click to collapse
Install it Or try this one maybe.
Wow thanks for answering that fast! i have x10 mini. i just want to install it but i dont know the way!
Rokriton said:
Wow thanks for answering that fast! i have x10 mini. i just want to install it but i dont know the way!
Click to expand...
Click to collapse
i found the suquashilinputmethod.apk keyboard and tried all these:
1> moving it to sd-card and giving all the permisions (with root explorer pro), tried installing but failed.
2> moving it to system/app folder giving perimisions again but failed
3> converting the ftf rom to flashable zip rom and adding the suquashilinputmethod.apk to system/app, then flashing the rom and stuck in logo-loop.
why anyone else says nothing about this keyboard? this is the only keyboard that is user-friendly! all other keyboards are just TOO difficult to type! its a 2.55 inch display!
LKnight said:
Which device do you have ? The Mini or the Mini Pro ?
What I know is that you can use Suquasinputmethod with the mini pro, It could work too on mini, to confirm. It can be found on any GB rom in the right forum.
But you have to know that there is a bug with the symbols panel, it hang if totally slide up or down. To free it, you'll have to turn the device in landscape then back in portrait.
Click to expand...
Click to collapse
i found the suquashilinputmethod.apk keyboard and tried all these:
1> moving it to sd-card and giving all the permisions (with root explorer pro), tried installing but failed.
2> moving it to system/app folder giving perimisions again but failed
3> converting the ftf rom to flashable zip rom and adding the suquashilinputmethod.apk to system/app, then flashing the rom and stuck in logo-loop.
why anyone else says nothing about this keyboard? this is the only keyboard that is user-friendly! all other keyboards are just TOO difficult to type! its a 2.55 inch display!
Hum, from where did you get the apk again ? I've told you to extract it from a cm rom of the forum, a gingerbread one actually. I don't know why you used a converted ftf...
Sent from my U20i using xda app-developers app
LKnight said:
Hum, from where did you get the apk again ? I've told you to extract it from a cm rom of the forum, a gingerbread one actually. I don't know why you used a converted ftf...
Sent from my U20i using xda app-developers app[/QUOTE
you didnt understand me. i got the apk file from the Gingersony rom which is a GB rom and requires nAa-14 kernel. I have the semc debrand engine rom which is an ftf file tha you flash with flashtool. i made my rom a flashable .zip so as to add in the system/app folder the .apk file
Click to expand...
Click to collapse
Rokriton said:
LKnight said:
Hum, from where did you get the apk again ? I've told you to extract it from a cm rom of the forum, a gingerbread one actually. I don't know why you used a converted ftf...
Sent from my U20i using xda app-developers app[/QUOTE
you didnt understand me. i got the apk file from the Gingersony rom which is a GB rom and requires nAa-14 kernel. I have the semc debrand engine rom which is an ftf file tha you flash with flashtool. i made my rom a flashable .zip so as to add in the system/app folder the .apk file
Click to expand...
Click to collapse
Flash SEMC Debrand Engine again, put the .apk on your sd-card and doubleclick it in root-explorer, it will install itself. Then go to Language and Keyboards and select Default Input as your keyboard of choice.
Click to expand...
Click to collapse
SmG67 said:
Rokriton said:
Flash SEMC Debrand Engine again, put the .apk on your sd-card and doubleclick it in root-explorer, it will install itself. Then go to Language and Keyboards and select Default Input as your keyboard of choice.
Click to expand...
Click to collapse
i tried to install it by simple clicking it just once. then pressed OK and started installing it but at the end it says: aplication not installed. is there a difference between double - simple clicking it?
Click to expand...
Click to collapse
Rokriton said:
SmG67 said:
i tried to install it by simple clicking it just once. then pressed OK and started installing it but at the end it says: aplication not installed. is there a difference between double - simple clicking it?
Click to expand...
Click to collapse
No, there's no difference I'm just used to double-clicking everything... Can't say for sure why it doesn't work on SEMC, it tends to work on every other ROM.
Click to expand...
Click to collapse
SmG67 said:
Rokriton said:
No, there's no difference I'm just used to double-clicking everything... Can't say for sure why it doesn't work on SEMC, it tends to work on every other ROM.
Click to expand...
Click to collapse
thanks for helping though!
Click to expand...
Click to collapse
Rokriton said:
thanks for helping though!
Click to expand...
Click to collapse
Did you try my other suggestion? It's not that bad, although it has it's quirks too.
SmG67 said:
Did you try my other suggestion? It's not that bad, although it has it's quirks too.
Click to expand...
Click to collapse
other suggestion?
Rokriton said:
other suggestion?
Click to expand...
Click to collapse
Yes, I gave a link to another userfriendly keyboard in post 3
SmG67 said:
Yes, I gave a link to another userfriendly keyboard in post 3
Click to expand...
Click to collapse
oh! yes i did! but it is under payment and the comments underneth was not the best. so i came back to stock rom with the awesome keyboard. T9 method in this phone is GODLIKE! you can type very easy and fast!
Check sometimes the progress for ics or jb, i'm on ics and it works fine, even the keyboard. And btw you can install xperia s keyboard if you are on ics or jb
Sent from my U20i using xda app-developers app
I don't know where to find an FSC script to flash .111 since flashtool keeps telling me that "Flash script is mandatory. Closing session". I don't know if I can't just take one from F33XX or if I'll brick my device. Flashtool doesnt provide a default.fsc file, itr only provides "F32XX.properties". And if doesn't exist, how can I make it by myself ?
same problem
szucsi1996 said:
same problem
Click to expand...
Click to collapse
It seems like you have to use an older version of flash tool where it won't ask for fsc.
Yooooomi said:
It seems like you have to use an older version of flash tool where it won't ask for fsc.
Click to expand...
Click to collapse
lol, im on 0.9.23.2
szucsi1996 said:
lol, im on 0.9.23.2
Click to expand...
Click to collapse
Try to use https://forum.xda-developers.com/xperia-sp/help/help-fsc-script-t3193845
Yooooomi said:
Try to use https://forum.xda-developers.com/xperia-sp/help/help-fsc-script-t3193845
Click to expand...
Click to collapse
does it work for you?
szucsi1996 said:
does it work for you?
Click to expand...
Click to collapse
I don't know I'm going to try it in 20 minutes, I'm not home haha
Yooooomi said:
I don't know I'm going to try it in 20 minutes, I'm not home haha
Click to expand...
Click to collapse
ok wait for you because my phone is in a gsm service.....
szucsi1996 said:
ok wait for you because my phone is in a gsm service.....
Click to expand...
Click to collapse
More than one hour that I'm stuck with a f*****g "Processing of boot.sin finished with errors" I dont know what to do :/
It doesn't ask for an FSC anymore but I can't get it to work
Yooooomi said:
More than one hour that I'm stuck with a f*****g "Processing of boot.sin finished with errors" I dont know what to do :/
It doesn't ask for an FSC anymore but I can't get it to work
Click to expand...
Click to collapse
szucsi1996 said:
Click to expand...
Click to collapse
I just downgraded my phone to .111 using the latest Flashtool. I went to Users/.flashtool and copied the default fsc of the F31XX to the F32XX folder, renaming it to the build version, something like "F3212_36.0.B.1.111.fsc". Flashtool then asked me if I wanted to use it during the flash, I answered yes. Now my phone is fully working, rooted and xposed on .111, till now everything is working fine, even the front camera focus
Yooooomi said:
I just downgraded my phone to .111 using the latest Flashtool. I went to Users/.flashtool and copied the default fsc of the F31XX to the F32XX folder, renaming it to the build version, something like "F3212_36.0.B.1.111.fsc". Flashtool then asked me if I wanted to use it during the flash, I answered yes. Now my phone is fully working, rooted and xposed on .111, till now everything is working fine, even the front camera focus
Click to expand...
Click to collapse
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
szucsi1996 said:
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
Click to expand...
Click to collapse
Let's make a new thread where i post screenshots...
Yooooomi said:
Let's make a new thread where i post screenshots...
Click to expand...
Click to collapse
You can post this thread or not?
szucsi1996 said:
You can post this thread or not?
Click to expand...
Click to collapse
https://forum.xda-developers.com/xa...-flashtool-t3551319/post70893399#post70893399
Yooooomi said:
https://forum.xda-developers.com/xa...-flashtool-t3551319/post70893399#post70893399
Click to expand...
Click to collapse
Are we the same issue? Make Xperia laugh when you switch to front camera.. And front camera saying some application using it?
nikkali25 said:
Are we the same issue? Make Xperia laugh when you switch to front camera.. And front camera saying some application using it?
Click to expand...
Click to collapse
Everything is working fine for me
szucsi1996 said:
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
Click to expand...
Click to collapse
Hope you have finally found the way to it, otherwise I'd like to tell how I did this.
First, in Windows, open file explorer and click on c:/ go to users and double click on your user name to open.
Once there go to .flashtools and navigate till you find the folder devices, open it and go to the foder corresponding to the name of your device, in this case I assume it musst be F32XX, open it and see if the is a file named F3213_(version of the room).fsc without the brackets.
If there is not you can goback to the devices folder and open the folder corresponding to F3211 and find a file named F3211_(version of a rom).fsc, if so just copy it into the folder corresponding to your device making sure your rename it with F3213_(version of the rom).fsc.
Finally just flash your rom with flashtools, at the beginning of the process it will ask you if you waant to use the fsc file found, just click on yes and the process will begin and end successfully.
I worked for me.
Hope you find it useful.
amhed91 said:
Hope you have finally found the way to it, otherwise I'd like to tell how I did this.
First, in Windows, open file explorer and click on c:/ go to users and double click on your user name to open.
Once there go to .flashtools and navigate till you find the folder devices, open it and go to the foder corresponding to the name of your device, in this case I assume it musst be F32XX, open it and see if the is a file named F3213_(version of the room).fsc without the brackets.
If there is not you can goback to the devices folder and open the folder corresponding to F3211 and find a file named F3211_(version of a rom).fsc, if so just copy it into the folder corresponding to your device making sure your rename it with F3213_(version of the rom).fsc.
Finally just flash your rom with flashtools, at the beginning of the process it will ask you if you waant to use the fsc file found, just click on yes and the process will begin and end successfully.
I worked for me.
Hope you find it useful.
Click to expand...
Click to collapse
So, Wit this your device won't brick?
merolrockstar said:
So, Wit this your device won't brick?
Click to expand...
Click to collapse
As I said I tested it and it's working on F3212, now look on the thread for the people who have another device
deleted
#reserved
OMG so fast ?
Does this have the libsecure fix?
PHP:
Erwandu83200 said:
OMG so fast ?
Click to expand...
Click to collapse
yeah for you all community
50% up.
charackthe said:
Does this have the libsecure fix?
Click to expand...
Click to collapse
nope.. its everything use stock one
ridwan.sn said:
PHP:
yeah for you all community
50% up.
nope.. its everything use stock one
Click to expand...
Click to collapse
Thanx for your work and for tell the % of uploading :fingers-crossed:
ridwan.sn said:
PHP:
yeah for you all community
50% up.
nope.. its everything use stock one
Click to expand...
Click to collapse
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
charackthe said:
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
Click to expand...
Click to collapse
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Erwandu83200 said:
Thanx for your work and for tell the % of uploading :fingers-crossed:
Click to expand...
Click to collapse
link updated ...
charackthe said:
Hmm. So it loses all the paired Bluetooth devices on reboot since it is rooted, sucks that we have to wait for a fix.
Click to expand...
Click to collapse
nope work fine here mate..
bober10113 said:
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Click to expand...
Click to collapse
i always added that tweak on build.prop and default prop.
and i work fine here .. lib_secure storage is needed for custom kernel build to fix wifi and bluetooth in my old S7. and i think its same too with N9.
just test rom u will know :fingers-crossed:
ridwan.sn said:
link updated ...
nope work fine here mate..
i always added that tweak on build.prop and default prop.
and i work fine here .. lib_secure storage is needed for custom kernel build to fix wifi and bluetooth in my old S7. and i think its same too with N9.
just test rom u will know :fingers-crossed:
Click to expand...
Click to collapse
Thanx you a lot I downloading it I tell you if any bug
Erwandu83200 said:
Thanx you a lot I downloading it I tell you if any bug
Click to expand...
Click to collapse
cheers.. just tell me at here and welcome
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
patensas said:
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
Click to expand...
Click to collapse
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
bober10113 said:
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
Click to expand...
Click to collapse
Would you mind pointing a lazy user toward that topjohnwoos installer?
patensas said:
Would you mind pointing a lazy user toward that topjohnwoos installer?
Click to expand...
Click to collapse
hes the magisk's dev:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
lol i dont know why I didn't just say magisk
bober10113 said:
hes the magisk's dev:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
lol i dont know why I didn't just say magisk
Click to expand...
Click to collapse
Ah that makes sense, I'm tired and didn't link topjohnwoos to John Wu lol thanks anyway
patensas said:
Thanks for your work, flashed the rom and all seems just fine. However root seems to be a bit messed up, I can't seem to delete any apps or folders due to the lack of the right permissions and there seems to be no way to change them.
I've tried removing chrome from system/app using root explorer and it fails. Any idea how to fix this?
Click to expand...
Click to collapse
did you tried other app and lastest? i havent tested it but im sure its wont mount system as i gues.
bober10113 said:
i believe that if you unroot and re root using topjohnwoos installer zip in recovery it will fix it. but the side effect might be broken bluetooth pairings on reboot.
Click to expand...
Click to collapse
bober10113 said:
hes the magisk's dev:
its has prerooted with magisk
patensas said:
Ah that makes sense, I'm tired and didn't link topjohnwoos to John Wu lol thanks anyway
Click to expand...
Click to collapse
yeah lol ..
Click to expand...
Click to collapse
ridwan.sn said:
did you tried other app and lastest? i havent tested it but im sure its wont mount system as i gues.
bober10113 said:
hes the magisk's dev:
its has prerooted with magisk
yeah lol ..
Click to expand...
Click to collapse
but i think the issue he was explaining is between sustem root and magisk manager. thats why i suggested to reinstall.
or maybe just update magisk manager to a canary build?
anyways im on a n960n so i cant flash the roms system.img due to the fact that partition system size is a bit smaller on n960n compared to n960f
Click to expand...
Click to collapse
bober10113 said:
so modded pie libsecure_storage.so and libsecure_storage_jni.so and editing in build.prop to ro.securestorage.support=false
dosent work anymore? on early pie builds that was the fix b4 magisk modules cameout to fix it
so for fun copy the libs manually from within the zip module to system and edit the prop:
https://github.com/Magisk-Modules-Repo/libsecure_storage/archive/libsecure_storage-v1.8.zip
Click to expand...
Click to collapse
I manually moved the files and edited the build.prop
Firstly, there is no jni files in lib or lib64 folders. Secondly, I replaced the files both in vendor and system and modified the build.prop, went into the system and found a start secure_storage command I replaced it with stop but nothing worked.
Any other link?