Related
Optware was originally developed as a distribution mechanism for software for the Open Source Linux project for the Linksys NSLU2 (a small low cost network storage device). That consumer storage device ran on Linux, and the community opened it up, but they needed a lightweight distribution mechanism for their lightweight devices.
Since 2004 Optware has been adopted by a variety of Linux communities and device developers including the webOS community working on the Palm Pre and Pixi, and developers for devices as diverse as Asus WL-500g,WL-HDD, WL-500gx, WL-500gP routers, the Synology DS-101 and DS-101g+ NAS devices.
At its core, Optware is a package manager to allow you to easly install and uninstall cross-compiled linux applications on your device over the internet. At this time, optware supports the automatic download and installation of over 1500 programs. (See the list at the end of the wiki article.)
Why should I use Optware?
Like the original slug, android devices lack a distribution mechanism to install Linux/command line tools programs and utilities. Many in the Android community who want or need to do command line processing on their device use a chroot of some sort (Debian seems popular) to get their distribution and package management tools. With Optware, it becomes possible to simply run whatever utility or program you want on the native underlying Linux.
Additionally, Optware For Android installs openSSH making it possible to access your Nook from any PC with SSH capability, and sets up an unprivileged username/password login system for the device at the command line. All in all then, since it can be installed with a single script, since it's lightweight, and since it's designed for small and embedded devices, Optware is a perfect fit for the Android community.
Optware for Nook is the first Optware for Android release by the Novaports team and is their gift to the Android community members who have helped them so much with information on Android devices.
What does it do?
The Optware bootstrap installed the IPKG package manager. It installs the optware Busybox. It installs openSSH and makes the ssh demon persistent. It creates an unprivileged user with a username and password you choose.
See Installation instructions and details at the Optware for Android page at Nookdevs.com
For completeness of licensing compliance, the source code for all optware package can be found at the following locations:
1) build scripts at svn.nslu2-linux.org in the /svnroot/optware/ area
2) tarballs at sources.nslu2-linux.org in the /sources area (this is a *large* directory)
To contribute code to Optware, see www . nslu2-linux . org in the /wiki/Optware/AddAPackageToOptware area
-- Rod Whitby
-- Original NSLU2-Linux Project Lead and Optware Architect
This works beautifully! Thank you!
Gonna try this and see if i can get samba to work.. a SMB mount over wifi would be awsome...
Many thanks!
I don't suppose there's a quick and easy way to completely remove optware?... not looking forward to culling through scripts and manually un-doing it all.....
adduser: not found
When it gets to the part in the install script to add the username of the unprivileged user, I enter a name, then it says: adduser: not found.
If it helps, I am using Rooted Stock 1.1.
Anyone get Optware to install on CM7 (newer nightly)
I am running CM7 #103 and would love to have optware installed.
But I get Fail if I try to use the method from Nookdevs
Tonight when I have more time I will look at the errors and see if I can tell what is up.
It looked like partially due to missing dir's for one (/tmp)
madrascafe said:
Gonna try this and see if i can get samba to work.. a SMB mount over wifi would be awsome...
Click to expand...
Click to collapse
The market has your answer and it's free:
https://market.android.com/details?id=com.funkyfresh.samba&feature=search_result
Am I the only one that wants Optware on CM7?
It goes fine on a manualnootered 1.2.0 NC But I prefer CM7 (And use the nightlies)
I would love to get this going on my NC as well. Running CM7 N121 w/ 6/30/2011 OC kernel. Was able to manually work past the tmp directory problem you mentioned, but I can't seem to execute the ipkg binary or installed. I've verified it indeed exists in the path I'm trying to execute it from, it has +x perms for user/ group/ other, but it always gives the error below:
/data/opt/bin/ipkg: not found
I've tried messing with bin directory and ipkg binary ownership, but no dice. If anything it should at least find it even if permissions aren't correct.
Looks like the contents of the binary reference ELF libraries which sounds like an issue attempting to execute in an Android environment. Going to see if I can chroot an environment that will work for it.
Sent from my NookColor using Tapatalk
This is happening because it's looking for /lib/ld-linux.so.3, and not finding it. I worked around by
ln -s /data/opt/lib/ld-linux.so.3 /lib/ld-linux.so.3
I also had to make these links:
ln -s /data/opt /opt
ln -s /data/tmp /tmp
And then set this:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/lib
export PATH=$PATH:/opt/bin/:/opt/sbin
in my bash profile to get things to start working.
One problem is my symlinks seem to get erased every reboot. I worked around by re-creating them in my bash profile, but I wish I knew how to make them permanent. This may be a ROM specific thing - this was written for a rooted stock nook, and I'm on an Epic running SFR.
I do not have a ld-linux.so.3 file on my NC w/ CM7 125
I have many other errors that show up:
Downloading the latest ipkg-opt package from the Optware package feed:
Connecting to ipkg.nslu2-linux.org (140.211.169.161:80)
wget: can't open 'ipkg-opt_0.99.163-10_arm.ipk': File exists
(NOTE the above file 'ipkg-opt_0.99.163-10_arm.ipk' does not exist
(on my NC - from a find / -name ipkg-opt_0.99.163-10_arm.ipk)
Updating the Optware package database:
ERROR: Failed to update the local Optware package database
Updating the Optware package database:
/data/optware-bootstrap-0.0.1.shar: ipkg-opt: not found
ERROR: Failed to update the local Optware package database
Any ideas?
The actual file it needs is /data/opt/lib/ld-linux.so.3 - you need to create a symlink in /lib in order to see it. But I think that file comes from the optware installer - if the installer is failing, you won't have it there either. It sounds like you may have bits of a previous install that failed, and it's preventing the install from running properly. Try looking at the log in /data/tmp for more info. After that, try rm -rf /data/tmp/* to clean up the old install and trying again.
Thank You for any pointers.
I deleted everything in /data/tmp first last attempt - like you suggested.
Same result
I have it down to only this error now when I run it (optware-bootstrap-0.0.1.shar):
Updating the Optware package database:
optware-bootstrap-0.0.1.shar: ipkg-opt: not found
ERROR: Failed to update the local Optware package database
ipkg-opt should be in /data/opt/bin. Check to see if it's there... if not, something went wrong in one of the previous steps - probably somewhere around "Downloading the latest ipkg-opt package from the Optware package feed". See if wget is actually downloading anything, where it's putting it, and what it's doing with it afterwards.
If it is there, try running it manually. If you see /data/opt/bin/ipkg or /data/opt/bin/ipkg-opt but it claims it's not there when you run it, it may be a library linking error. Mine was looking for /lib/ld-linux.so.3 but it was actually installed at /data/opt/lib/ld-linux.so.3. mount -o remount,rw followed by ln -s /data/opt/lib/ld-linux.so.3 /lib/ld-linux.so.3 fixed that. I also had to run
ln -s /data/opt /opt
ln -s /data/tmp /tmp
before things started working.
By the way:
ntfsprogs - NTFS filesystem libraries and utilities
Could that be of any use? At the moment, it's not possible to mount NTFS storage on the NC
i would love to know how you guys get to this point even. When i try to install the very fist line of the script is an error and then nothing at all happens .... something about not finding busybox or something of that nature.
So you guys are getting WAY farther than I've been able to.
Tkx Tonygoes.
It is there in /data/opt/bin but it reports /data/opt/bin/ipkg: not found
I cannot find a ld-linux.so.3 on my NC at all.
I did the other links et al fro your comments also
obsid:
Try post 12 above:
and I had some other suggestions from someone:
might try thses FIRST the script seems to do it but may not actually get it done.
mount -o remount,rw / /
mount -o remount,rw /dev/block/mmcblk0p5 /system
you should also if tried before do this: rm -rf /data/tmp/
then do the items in post #12 above
NOTE for me the ln -s to ld-linux.so.3 does not work as I do not have that file on my system
Hello there! After months asking for the developer of Simple Streak Rom for a fix in the VPN connections (and no answer) I have been trying to fix it. Well, I made it! After several days of frustration, I have finally made it work
What do you need:
1. Working VPNServices.apk (I pulled from the PlayDoh ROM, which it is based on 354 ROM which it is supposedly the same of Simple Streak 1.2 Testing V4)
Links:
http://www.multiupload.com/E9RI0XOKCQ
Mirror:
https://sites.google.com/site/ernestovillarreal/home/VpnServices.apk?attredirects=0&d=1
2. Working tun.ko for our devices (thanks gpmg762 for that!)
Link:
http://www.multiupload.com/D3FXAJUC72
Mirror:
https://sites.google.com/site/ernestovillarreal/home/tun.ko?attredirects=0&d=1
3. Need to give special permissions to the VPNServices.apk. In a terminal emulator, or using adb, type:
Code:
su
mount -o remount,rw /dev/null /system
chmod 0644 /system/app/VpnServices.apk
mount -o remount,ro /dev/null /system
sync
reboot
3. Load for the first time the tun.ko. In the same console, type:
Code:
su
insmod /pathofwheretun.kois/tun.ko
4. Edit the init script to load the tun module every boot. Edit this file: "/etc/init.streak.post_boot.sh", adding this line to the last line:
"insmod /system/lib/modules/tun.ko"
ASSUMING you have the tun.ko in /system/lib/modules folder.
And that's it!
**UPDATE: It works! The problem seems to be my router, in 3G is working fine!!
**UPDATE 2: In my case, it is not working on WiFi. I'll try on other ones in the night.
**UPDATE 3: My bad, problem with the chmod. I have fixed it on the thread
**UPDATE 4: In the Simple Streak 1.3 testing 5, Splida added the tun.ko but he didnt add the VpnServices.apk nor the postboot modification. So, just skip step 2. And it is still not working using WiFi.
WiFi problem probably with dd-wrt router. Will test this night.
#Bump
This is awesome! VPN working on Simple Streak?! Downloading now.
Excited to use my blue tooth mouse with windows remote desktop (2x Client) away from the office and secured tunnel.
::EDIT:: working great on my WiFi!
Ok, so how do we script tun.ko? You could figure out how to run the insmod /data/tunko/tun.ko at every boot -TheManii, I'm looking at you
Or create a shortcut that will run tun.ko on demand and preferably connect the VPN with the same single click.
This is more of DJ_Steve's area of expertise I think, I dont really know much in regards to launching scripts on boot.
I guess you could make a script in /system/etc/init.d or just /system/etc
with
Code:
insmod /system/lib/modules/tun.ko
I dont see where streakdroid has it's scripts to run it, mabye it's automatic if it's in that folder? If it does in fact still need to be scripted i believe init.d runs with root privs?
Really I'm just guessing
May be you can try scriptmanager run on boot option
Sent from my Dell Streak using Tapatalk
Guys, you can put the line "/system/bin/insmod /system/lib/modules/tun.ko" into /etc/init.streak.post_boot.sh, that loads it for me after a reboot.
Or you can use GScript from market to load it manually.
Hope that helps.
gpmg762 said:
Guys, you can put the line "/system/bin/insmod /system/lib/modules/tun.ko" into /etc/init.streak.post_boot.sh, that loads it for me after a reboot.
Or you can use GScript from market to load it manually.
Hope that helps.
Click to expand...
Click to collapse
That's right, I figured it out minutes later I posted this post.. but I was lazy to put it here
In my case, I just put on the last line:
insmod /system/lib/modules/tun.ko
i'm testing your method now....
here is the result. ..
terminal emulator:
su
insmod /system/lib/modules/tun.ko
insmod: init_module '/system/lib/modules/tun.ko' failed(Exec format error)
need your expertise. . . .TIA
in init.streak.post_boot.sh
the last line says "esac"
will i put it like this{ esac "insmod /system/lib/modules/tun.ko"}
or like this:
esac
"insmod /system/lib/modules/tun.ko"
noob here....thanks again.
request. . .
gpmg762 said:
Guys, you can put the line "/system/bin/insmod /system/lib/modules/tun.ko" into /etc/init.streak.post_boot.sh, that loads it for me after a reboot.
Or you can use GScript from market to load it manually.
Hope that helps.
Click to expand...
Click to collapse
can you compile a working tun.ko for my device sir?tun attached in this thread didn't work for me...here is the info:
dell streak 5
android 2.2.2
baseband - GAUSB1A134700-EU
kernel - SimpleStreakKernel-bySpidlA
OEM - GAUSB1A135411
build number - Simple Streak 1.3 (4th testing)
TIA XDA MEMBERS...
takoyaki17 said:
can you compile a working tun.ko for my device sir?tun attached in this thread didn't work for me...here is the info:
dell streak 5
android 2.2.2
baseband - GAUSB1A134700-EU
kernel - SimpleStreakKernel-bySpidlA
OEM - GAUSB1A135411
build number - Simple Streak 1.3 (4th testing)
TIA XDA MEMBERS...
Click to expand...
Click to collapse
Try to ask him via PM and then, provide the tun.ko, so I can put it on the mirror server to everyone.
takoyaki17 said:
i'm testing your method now....
here is the result. ..
terminal emulator:
su
insmod /system/lib/modules/tun.ko
insmod: init_module '/system/lib/modules/tun.ko' failed(Exec format error)
need your expertise. . . .TIA
in init.streak.post_boot.sh
the last line says "esac"
will i put it like this{ esac "insmod /system/lib/modules/tun.ko"}
or like this:
esac
"insmod /system/lib/modules/tun.ko"
noob here....thanks again.
Click to expand...
Click to collapse
Thanks right, but without the quotes.
Like this:
esac
insmod /system/lib/modules/tun.ko
Still searching for the right tun.ko to run openvpn in my streak....
Sent from my Dell Streak using XDA Premium App
takoyaki17 said:
Still searching for the right tun.ko to run openvpn in my streak....
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
if you trust me, sned me the login details so I can check with my cell phone if I can log in.
hmmm
netomx said:
if you trust me, sned me the login details so I can check with my cell phone if I can log in.
Click to expand...
Click to collapse
log in details of what?my openvpn or my xda account?
takoyaki17 said:
can you compile a working tun.ko for my device sir?tun attached in this thread didn't work for me...here is the info:
dell streak 5
android 2.2.2
baseband - GAUSB1A134700-EU
kernel - SimpleStreakKernel-bySpidlA
OEM - GAUSB1A135411
build number - Simple Streak 1.3 (4th testing)
TIA XDA MEMBERS...
Click to expand...
Click to collapse
try the attached file.
netomx said:
if you trust me, sned me the login details so I can check with my cell phone if I can log in.
Click to expand...
Click to collapse
For your last config file.
takoyaki17 said:
log in details of what?my openvpn or my xda account?
Click to expand...
Click to collapse
Your OpenVPN login details.
thanks but. . .
gpmg762 said:
try the attached file.
Click to expand...
Click to collapse
i think it doesn't work....
i used terminal emulator to test it
and says no such file or directory....
can you take another shot sir....thanks
takoyaki17 said:
i think it doesn't work....
i used terminal emulator to test it
and says no such file or directory....
can you take another shot sir....thanks
Click to expand...
Click to collapse
That seems to be a problem in your terminal emulator.
hmmm
netomx said:
That seems to be a problem in your terminal emulator.
Click to expand...
Click to collapse
i dont think so...at first i thought that's the problem too....
so i tried using openvpn it says FATAL ERROR: cannot allocate tun/tap
you guys are great...so please help me. . .thanks
takoyaki17 said:
i dont think so...at first i thought that's the problem too....
so i tried using openvpn it says FATAL ERROR: cannot allocate tun/tap
you guys are great...so please help me. . .thanks
Click to expand...
Click to collapse
yes it is, that's why openvpn can't open the tun device.
type here what you write on the terminal
netomx said:
yes it is, that's why openvpn can't open the tun device.
type here what you write on the terminal
Click to expand...
Click to collapse
same as your post...
su
mount -o remount,rw /dev/null /system
chmod 0644 /system/app/VpnServices.apk
mount -o remount,ro /dev/null /system
sync
reboot
then after reboot:
su
insmod /system/lib/modules/tun.ko
i tried the one gpmr provided ad the result is:
no such file or directory
then i tried the one that he gave you last:
Failed (file exist)
anyway,what does 0644 do to the vpnservices.apk?
I ran the Snowball Mod without a hitch. I then tried to run the update but it won't run for some reason. The window flashes some text quickly but then closes so I'm not even really sure why it's not working. Anyone run into this or have any ideas. Thanks in advance!
I haven't had the time to try out the snowball mod, yet -- so I can't offer any advice. But, I would post the issue in the development thread, that's where the most help will be.
Swyped from my B&N Nook Tablet.
Try running it from a command line to keep it up and be able to read any text.
Also, there is a log.txt, if you post that, it can be more helpful.
Yeah I was goin to but I don't have enough posts. I was hoping someone would see it here.
Well... if you post your log.txt and start it from a command-line window rather than double clicking the update.bat, then we can take a look at what's up.
Log file says:
Snowball is reporting: v2.0.2
NO PACKAGE AVAILABLE
Command line:
Snowball is reporting: v2.0.2
There does not appear to be a package for the version snowball is reporting.
Are you sure you're not reapplying an update?
Perhaps you are accidentally trying to apply an "outdate"?
Thanks a lot!
There is no v2.0.2 update package in the zip folder. I renamed v2.0.1 to v2.0.2 and ran. Not sure if this was a good thing to do or not. Any help or direction would be appreciated. Thanks.
No write permissions
Tried to install snowball mod from a macbook pro by just running the snowball.sh. Started up and the B&N stuff was all there, although it looked like it ran without a hitch.
Looked at the log file in the snowball-mod folder and saw a lot of "Read-only file system" business. The first few lines being:
unzip: can't open nook-update-package.zip, nook-update-package.zip.zip, nook-update-package.zip.ZIP^M
rm failed for nook-update-package.zip, Read-only file system^M
Installing nook-update-package...
cd: can't cd to /mnt/media/nook-update-package^M
sh: Can't open install^M
rm failed for /mnt/media/nook-update-package, No such file or directory^M
Click to expand...
Click to collapse
How do you suggest I get around that?
conundrum768 said:
I haven't had the time to try out the snowball mod, yet -- so I can't offer any advice. But, I would post the issue in the development thread, that's where the most help will be.
Swyped from my B&N Nook Tablet.
Click to expand...
Click to collapse
We need 10 legit posts before we are allowed to post in the dev forum
Robotronik said:
Tried to install snowball mod from a macbook pro by just running the snowball.sh. Started up and the B&N stuff was all there, although it looked like it ran without a hitch.
Looked at the log file in the snowball-mod folder and saw a lot of "Read-only file system" business. The first few lines being:
How do you suggest I get around that?
Click to expand...
Click to collapse
Huh... this is weird... /mnt/media should not be read-only... although, I suppose, perhaps if you had it USB mounted, it might end up read-only.
Ensure that you have Automatic USB mounting turned off before you run the script.
You can actually push this update via wifi if you mod the update.bat (or update.sh for linux users) file.
Just turn on ADB Wifi (I prefer adbWireless app) and add the following to your bat file:
Code:
echo Waiting for device...
[B]adb connect XXX.XXX.XXX.XXX:XXXX[/B]
adb wait-for-device
...
adb shell "chmod 755 /data/local/tmp/update-package.sh ; su -c /data/local/tmp/update-package.sh" >> log.txt
if exist reboot adb reboot
[B]adb connect XXX.XXX.XXX.XXX:XXXX[/B]
echo INSTALLATION SUCCESSFUL
Use your IPort given to you by your ADB Wifi app in place of XXXs. Then just run the .bat!
Run from cmd if you don't want the output to vanish right away.
cfoesch said:
Ensure that you have Automatic USB mounting turned off before you run the script.
Click to expand...
Click to collapse
Okay, that got me a little further. Now:
Extracting nook-update-package...
Archive: nook-update-package.zip
creating: nook-update-package/data/
unzip: can't set permissions of directory 'nook-update-package': Operation not permitted
unzip: exiting
Installing nook-update-package...
sh: Can't open install
Click to expand...
Click to collapse
More permissions issues...
Still posting here because I don't have the 10 total posts to go in the Dev forum...
Anyway, I did the factory reinstall, and reran the snowballmod update. It said the root was still there, so I commented out that check from the snowball.sh, reran the package and everything went swimmingly.
Now, for the update:
The terminal spits out this:
Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
7 KB/s (46 bytes in 0.006s)
Snowball is reporting: v2.0.2
.zipte-package-v2.0.2
There does not appear to be a package for the version snowball is reporting.
Are you sure you're not reapplying an update?
Perhaps you are accidentally trying to apply an 'outdate'?
Click to expand...
Click to collapse
Where the log file gives me:
Snowball is reporting: v2.0.2
NO PACKAGE AVAILABLE
Click to expand...
Click to collapse
The file "update-package-v2.0.2.zip" is in the directory. In the "update.sh" file replaced all instances of "${VERSION}" with "v2.0.2" and it seemed to work fine.
same
Robotronik said:
Still posting here because I don't have the 10 total posts to go in the Dev forum...
Anyway, I did the factory reinstall, and reran the snowballmod update. It said the root was still there, so I commented out that check from the snowball.sh, reran the package and everything went swimmingly.
Now, for the update:
The terminal spits out this:
Where the log file gives me:
The file "update-package-v2.0.2.zip" is in the directory. In the "update.sh" file replaced all instances of "${VERSION}" with "v2.0.2" and it seemed to work fine.
Click to expand...
Click to collapse
I AM HAVING THE SAME PROBLEM.MYBE..I need help some plz make a better howtos for dummies m
The first thing you need to do, if you have no clue what you're doing, is post the contents of the log file in the snowballmod folder.
The ".zipte-package-v2.0.2" seems to be related to adb shell "snowball-ver" returning DOS formatted text, even though you're in a *nix. I really did not expect this to happen with the linux and osx versions of adb, but apparently, they perform the same as cygwin... (cygwin I expected, after all, the adb.exe is a windows program). I will fix the update scripts to take that into account.
Code:
unzip: can't set permissions of directory 'nook-update-package': Operation not permitted
This message is reported by unzip when it is run by a non-root user on the /mnt/media partition.
You do _NOT_ have to run snowball-update though if you've installed snowball-mod fresh with the most recent version.
robtlebel said:
I AM HAVING THE SAME PROBLEM.MYBE..I need help some plz make a better howtos for dummies m
Click to expand...
Click to collapse
The changes made to the script were posted here:
Robotronik said:
Now, for the update:
The terminal spits out this:
Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
7 KB/s (46 bytes in 0.006s)
Snowball is reporting: v2.0.2
.zipte-package-v2.0.2
There does not appear to be a package for the version snowball is reporting.
Are you sure you're not reapplying an update?
Perhaps you are accidentally trying to apply an 'outdate'?
Where the log file gives me:
Snowball is reporting: v2.0.2
NO PACKAGE AVAILABLE
The file "update-package-v2.0.2.zip" is in the directory. In the "update.sh" file replaced all instances of "${VERSION}" with "v2.0.2" and it seemed to work fine.
Click to expand...
Click to collapse
I had the same issue with the name of the update file being called incorrectly: ".zipte-package-v2.0.2". With that output the script is looking for a file of that name and it's not finding it. I just changed the value of the variable ${VERSION} to v2.0.2 (since that was what was being reported by Snowball as my current version) and all worked after that.
Easy to fix temporarily:
-open "update.sh" in a text editor
-go to line 66 and change
VERSION=`awk '//{ print $2 }' snowball.version`
Click to expand...
Click to collapse
to
VERSION=v2.0.2
Click to expand...
Click to collapse
or whatever version yours shows to be running (v2.0.1, etc). Something tells me it might be important to input the correct current version number in
-save and close the file and rerun it.
EDIT: or wait until cfoesch fixes the scripts
Scripts should be updated. I changed the awk program from just "//{ print $2 }" to "//{ sub('\r', '', $2); print $2 }" ... this means that it works both ways... *insert your favorite "both ways" joke here*
It should also detect if you haven't turned off automount, and warn you about it. If the nook ends up rebooting, then it would tear the USB mount and could cause file corruption. I got around it by putting things in /data rather than /mnt/media, but then realized, if it has to reboot, then it could cause trouble. So better, to just warn them that automount was on, and quit out.
It also detects better if something went wrong in the installation process, and should report that installation has failed, rather than successful under all cases.
Things may have gotten broken in the process, so keep up the bug reports.
I just can't stop Nookin' Around.........god i need to sleep
I decided to check out the update.sh script (can only go so far currently since I have the latest update).
At least for me, (Ubuntu Linux 11.10) I figured something out about the $OSTYPE call to set the $adb variable. I could echo $OSTYPE in the terminal and got a response, but could not echo it in any scripts. Ended up finding the "uname -o" call and that seems to have gotten it to work, although the printout is different.
snowball-update# echo $OSTYPE
linux-gnu
snowball-update# uname -o
GNU/Linux
Changed lines 7 & 8 and seems to have worked:
case `uname -o` in
GNU*|linux*|Linux*)
Now this last part is probably something on my end but: update.sh: 62: ./adblinux: Permission denied
Thanks again for the work (and everyone else involved in rooting/hacking these things )
Indeed. $OSTYPE seems to be specific to bash, and not all sh implementations.
If you don't mind could you do this command and give me the output? "ls -l /bin/sh" and "sh --version" Those two commands should explain exactly which implementation of sh you have. (For instance, on the NT with snowball-mod, the sh is a minimal implementation, and does not support $OSTYPE. But on most OSes I've seen sh is actually a statically linked bash, as it is the most widely used shell scripting language.)
The case on that you provided though could be a poor choice, as GNU*) would match GNU/freebsd, or GNU/openbsd, or GNU/anykernel. Sure it is unlikely, but it is possible.
The permissions issue is not entirely your end, but it is an expected artifact of extracting from a zip file. Although, is suppose performing a chmod 755 on it prior to use would be a good idea in general.
I have spent the last to days trying to solve my error setting up sdk on linux mint12. I keep getting this error.
[Qoute]
scott-Presario-CQ62-Notebook-PC scott # apt-get -f installReading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libc-bin libc6
Suggested packages:
glibc-doc
The following NEW packages will be installed:
libc-bin
The following packages will be upgraded:
libc6
1 upgraded, 1 newly installed, 0 to remove and 376 not upgraded.
3 not fully installed or removed.
Need to get 0 B/5,143 kB of archives.
After this operation, 3,432 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16.
Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17.
Preconfiguring packages ...
dpkg: warning: 'ldconfig' not found in PATH or not executable.
dpkg: error: 1 expected program not found in PATH or not executable.
Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin.
E: Sub-process /usr/bin/dpkg returned an error code (2)
[Qoute]
I have tried every fix I have found online and all return this exact error. I tried changing the permisons on etc/sudoers to make sure they were right. I also added a these paths.
export PATH={PATH}:/usr/local/sbin:/usr/sbin:/sbin
export PATH={PATH}:/usr/local/bin:/usr/bin:/bin
I have even placed a permission file inside sudoers.d to try to add the path but I just ended up ruining my root access and have to do a complicated fix through my bootloader.but just cant seem to get it to work I am newer to linux and know basic commands but have no idea why I keep getting the same error or how to fix it any help would be deeply appreciated.
Are you running 64 bit? You need to dl the 32 bit lib's
Now it may be cheating, but try Tommytommatoe's android utility it sets up SDK for you and adds everything to your path... It's my go to for stubborn SDK
Sent from my PC36100 using xda premium
Yea it 64bit and I added the 32 bit libs for java but it gives the error when I try that to. I guess I will try that tanks man
Sent from my ADR6425LVW using XDA
Are you using an installer script or something like that?
RoberGalarga said:
Are you using an installer script or something like that?
Click to expand...
Click to collapse
No just piece by piece did java then unpacked SDK in my root dir and update it installed the API and all that then when I try to use adb it says their is no command and all the fixes make the error I described at first.
Sent from my ADR6425LVW using XDA
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
RoberGalarga said:
Ok... you don't need any fixes... you can simply move to platform-tools directory (using command cd /path/to/platform-tools) to can run ./adb command (note: ./adb, not adb).
Click to expand...
Click to collapse
Really now I feel dumb lol. Guess I'm to used to windows been developing on it for a while. Thanks a lot.
Sent from my ADR6425LVW using XDA
Well thanks for all your help guys I guess I had a bad download of linux so I did a new clean install and setup SDK and apktool and dsixdas kitchen. Now everything works fine. No sudo errors or nothing the good news is with all the trying to fix what was wrong I got used to root being / instead of c:/ so that's a bonus
Sent from my ADR6425LVW using XDA
Hi there!
Following the hadk pdf from jolla porting guide.
I've got the sailfishos working on terminal android running. Booting on top attempting since monday tonight.
I'll explain more and I'll give more shots on working.
My issue now is to build the boot, recovery image to flash and boot it. The jolla sailfishos as a GUI operating system on Galaxy S3 I9300 model.
FIY : filename = sfa-i9300-ea-1.0.8.19-my1.tar.bz2
Instructions for chroot co,pilation on ubuntu amd64 x86_64 bit:
Code:
sudo mkdir -p /srv/mer/
mkdir -p $HOME/mer/
nano .bashrc
export $MER_ROOT=/srv/mer/
export $MER_ROOT=$HOME/mer/
ctrl +x to save and y
but type sudo apt-get install -y curl
for do the downloading file.
next do the following commands on terminal:
export $MER_ROOT=/srv/mer/
cd $HOME; curl -k -O https://img.merproject.org/images/mer-sdk/mer-i486-latest-sdk-rolling-chroot-armv7hl-sb2.tar.bz2 ;
sudo mkdir -p $MER_ROOT/sdks/sdk ;
cd $MER_ROOT/sdks/sdk ;
sudo tar --numeric-owner -p -xjf $HOME/mer-i486-latest-sdk-rolling-chroot-armv7hl-sb2.tar.bz2 ;
echo "export MER_ROOT=$MER_ROOT" >> ~/.bashrc
echo 'alias sdk=$MER_ROOT/sdks/sdk/mer-sdk-chroot' >> ~/.bashrc ; exec bash ;
echo 'PS1="MerSDK $PS1"' >> ~/.mersdk.profile ;
sdk
Now, do the following instructions:
$HOST>
nano $HOME/.hadk.env
export MER_ROOT="[/home/$user]"
export ANDROID_ROOT="$MER_ROOT/android/droid"
export VENDOR="[samsung]"
export DEVICE="[i9300]"
ctrl +x and y for save it.
nano $HOME/.mersdkubu.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
export PS1="HABUILD_SDK [\${DEVICE}] $PS1"
hadk
save it again
nano $HOME/.mersdk.profile
function hadk() { source $HOME/.hadk.env${1:+.$1}; echo "Env setup for $DEVICE"; }
hadk
now save this file.
Now in ctrl + alt + x, it will show a terminal:
type this:
sdk
type your password
hadk
TARBALL=ubuntu-quantal-android-rootfs.tar.bz2
curl -O http://img.merproject.org/images/mer-hybris/ubu/$TARBALL
UBUNTU_CHROOT=/parentroot/$MER_ROOT/sdks/ubuntu
sudo mkdir -p $UBUNTU_CHROOT
sudo tar --numeric-owner -xvjf $TARBALL -C $UBUNTU_CHROOT
hadk
ubu-chroot -r /parentroot/$MER_ROOT/sdks/ubuntu
exit
git config --global user.name "Your Name"
git config --global user.email "Your email"
back again for
hadk
cd $HOME
mkdir -p $HOME/mer/android/droid
repo init -u git://github.com/mer-hybris/android.git -b hybris-10.1
repo sync
after this, you will have HABUILD_SDK
DEVICE=i9300
export $DEVICE
source build/envsetup.sh
breakfast $DEVICE
now type
make hybris-hal
But now as a ota file for flashing on i9300, in this last 2 days in my laptop core2Duo Extreme I'm facing overheating.
So, everyone can test it.
Code:
A little change on mount fixups.
Go to the directory hybris/hybris-boot
nano mount-fixups on i9305| encore)
put the "i9305" | "encore" | "i9300")
Script for booting sailfishingos on an android terminal. This script is to mount the binds folders and for fixing for preventing the /dev/null issue when we all boot the chroot sailfishos.
name of the script : sailfishos.sh - made it on the /extsdCard/ folder.
1) nano /extSdCard/sailfishos.sh and copy the following code
2) ctrl +x to save it
3) bash sailfishos.sh
Code:
su
mount -o bind /dev /data/.stowaways/sailfishos/dev
mount -o bind /proc /data/.stowaways/sailfishos/proc
mount -o bind /sys/ /data/.stowaways/sailfishos/sys
chroot /data/.stowaways/sailfishos/ /bin/su -
echo "nameserver 8.8.8.8" > /etc/resolv.conf
Code:
Procedures:
1) get cm 10.1 flash it.
2) recovery mode to flash it.
3) download my sailfish i9300 tar.bz2 from d-h.st
4) Copy it for your /extSdCard
Code:
Procedures inside adb:
1) sudo adb kill-server
2) sudo adb start-server
3) adb devices
4) adb shell
5) su
6) cd /extSdCard/
8) mkdir -p /data/.stowaways/sailfishos
8) tar --numeric-owner -xvf filename -C /data/.stowaways/sailfishos
9) mount -o bind /dev /data/.stowaways/sailfishos/dev
10) mount -o bind /proc /data/.stowaways/sailfishos/proc
11) mount -o bind /sys /data/.stowaways/sailfishos/sys
finally:
chroot /data/.stawaways/sailfishos/ /bin/su-
you'll see sailfish os version something 15
try this on it:
cd /
ls
[LINK] http://d-h.st/gX5 [/LINK]
See folders on it.
PS: I'll give more shots also more instructions very soon. Thanx.
Another PS: I'll give more news about Jolla sailfish os very soon.
But I need to tell this, I've got i9300 defconfig kernel for Jolla sailfishos very similar to defconfig i9305 kernel and I got it compiled with very success on hadk Ubuntu chroot on mine Ubuntu 14.04 LTS version.
astronfestmon said:
Hi there!
Following the hadk pdf from jolla porting guide.
I've got the sailfishos working on terminal android running. Booting on top attemptinh since yesterday tonight.
Code:
Procedures:
1) get cm 10.1 flash it.
2) recovery mode to flash it.
3) download my sailfish i9300 tar.bz2 from d-h.st
4) Copy it for your /extSdCard
Code:
Procedures inside adb:
1) sudo adb kill-server
2) sudo adb start-server
3) adb devices
4) adb shell
5) su
6) cd /extSdCard/
8) mkdir -p /data/.stowaways/sailfishos
8) tar --numeric-owner -xvf filename -C /data/.stowaways/sailfishos
9) mount -o bind /dev /data/.stowaways/sailfishos/dev
10) mount -o bind /proc /data/.stowaways/sailfishos/proc
11) mount -o bind /sys /data/.stowaways/sailfishos/sys
finally:
chroot /data/.stawaways/sailfishos/ /bin/su-
you'll see sailfish os version something 15
try this on it:
cd /
ls
[LINK] http://d-h.st/gX5 [/LINK]
sees folders on it.
Click to expand...
Click to collapse
Screenshots?
Sent from my SM-G900F using XDA Free mobile app
Fantastic... I'll give a try. Plz provide some more details, screenshots & new features from your currently running sailfish os. Thanx for sharing
i fed with adb commands & not able to flash
Uhm ... I gonna wait for this ...
Sent from my SM-G900F using XDA Free mobile app
how to install ?
When I had the rom for flashing in recovery. I'll explain it.
For now, it can be installed through the adb, to work it inside the android terminal.
astronfestmon said:
When I had the rom for flashing in recovery. I'll explain it.
For now, it can be installed through the adb, to work it inside the android terminal.
Click to expand...
Click to collapse
any update on this?
I followed the above procedure and I can see the Sailfish version and the files list from adb. What next?
EDIT: Just saw your PS in OP
In the end of the week probably I'll release the boot kernel working on.
astronfestmon said:
In the end of the week probably I'll release the boot kernel working on.
Click to expand...
Click to collapse
I've successfully built boot and recovery images, packed the zip for flashing in recovery but there is a problem with the boot.img.
I'm trying to find out why it doesn't boot (the phone stays at the galaxy logo)
The actual guide for porting misses some stuff and there are errors here and there. Besides, there is a problem with the trusty chroot, quantal is working.
Aye. I've notice that.
I'm fixing some issues in quantal chroot.
E.g. inside the sources.list I add the 12.04 lts mirrors. Made by a website with the sources.list for 12.04 lts mirrors.
Yeah. I've done the boot kernel image and it made the same as you.
But with meld diff I've compared the i9305 defconfig with mine i9300 defconfig.
I'm going to test it with the changes meld diff made with a comparison with i9305 defconfig.
Now I made a make systemtarball and I'll try a make bootimage or a make factory_image for it.
astronfestmon said:
Aye. I've notice that.
I'm fixing some issues in quantal chroot.
E.g. inside the sources.list I add the 12.04 lts mirrors. Made by a website with the sources.list for 12.04 lts mirrors.
Yeah. I've done the boot kernel image and it made the same as you.
But with meld diff I've compared the i9305 defconfig with mine i9300 defconfig.
I'm going to test it with the changes meld diff made with a comparison with i9305 defconfig.
Now I made a make systemtarball and I'll try a make bootimage or a make factory_image for it.
Click to expand...
Click to collapse
It would be great if you could make it to boot.
I will try to compile the kernel with CONFIG_CMDLINE="console=tty0" . I'm hoping that would direct kernel panic message to the screen so we could idenfity what the problem is with booting hybris-boot.img
So... Any development?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hi! All of you! I'm doing efforts between these days. In these vacation days. I'll report more when I got home back.
astronfestmon said:
Hi! All of you! I'm doing efforts between these days. In these vacation days. I'll report more when I got home back.
Click to expand...
Click to collapse
Hi, I've also been trying to port sailfish os to i9300. I've been successful in creating an image that works, i.e. got it to boot into sailfish but there are some issues that I haven't been able to fix, like for instances, the wlan is detected but fails to establish a connection with any network, GSM is also not working. A full list with details can be found here https://wiki.merproject.org/wiki/Adaptations/libhybris
Maybe we should try to work together to get a fully functional sailfish os image
Cheers
---------- Post added 19th August 2014 at 12:01 AM ---------- Previous post was 18th August 2014 at 11:12 PM ----------
redrum781 said:
I've successfully built boot and recovery images, packed the zip for flashing in recovery but there is a problem with the boot.img.
I'm trying to find out why it doesn't boot (the phone stays at the galaxy logo)
The actual guide for porting misses some stuff and there are errors here and there. Besides, there is a problem with the trusty chroot, quantal is working.
Click to expand...
Click to collapse
The phone may be stuck at the galaxy logo, but there's a way to debug to find out what's wrong, follow this steps (only tested on linux):
1) connect your phone with the computer, the initramfs in boot.img will create a network interface (phone's ip is: 192.168.2.15) and enable a telnet deamon (default port: 23) and also a udhcp server, so luckily the computer will ask for an ip that everything will be set up automatically. If not try configuring static ip (192.168.2.20 and adding a route to 192.168.2.0)
2) telnet 192.168.2.15
3) when you're in the telnet session, you can check /diagnostic.log (i think) it will show why the boot failed. It is possible to execute commands into the init, by writing to (/init-ctl/stdin)
When logged into the telnet session it will dump a bit of information, be sure to read it as is useful .
Also check HADK 9.2 Operating Blind on an Existing Device
PS: the files may contain mistakes as I wrote this post without checking for the correct names (I don't have sailfish flashed at the moment).
Also consider visiting the IRC channel (#sailfishos-porters), if you're not doing it already
Hope it helps
rusty88 said:
Hi, I've also been trying to port sailfish os to i9300. I've been successful in creating an image that works, i.e. got it to boot into sailfish but there are some issues that I haven't been able to fix, like for instances, the wlan is detected but fails to establish a connection with any network, GSM is also not working. A full list with details can be found here https://wiki.merproject.org/wiki/Adaptations/libhybris
Maybe we should try to work together to get a fully functional sailfish os image
Cheers
---------- Post added 19th August 2014 at 12:01 AM ---------- Previous post was 18th August 2014 at 11:12 PM ----------
The phone may be stuck at the galaxy logo, but there's a way to debug to find out what's wrong, follow this steps (only tested on linux):
1) connect your phone with the computer, the initramfs in boot.img will create a network interface (phone's ip is: 192.168.2.15) and enable a telnet deamon (default port: 23) and also a udhcp server, so luckily the computer will ask for an ip that everything will be set up automatically. If not try configuring static ip (192.168.2.20 and adding a route to 192.168.2.0)
2) telnet 192.168.2.15
3) when you're in the telnet session, you can check /diagnostic.log (i think) it will show why the boot failed. It is possible to execute commands into the init, by writing to (/init-ctl/stdin)
When logged into the telnet session it will dump a bit of information, be sure to read it as is useful .
Also check HADK 9.2 Operating Blind on an Existing Device
PS: the files may contain mistakes as I wrote this post without checking for the correct names (I don't have sailfish flashed at the moment).
Also consider visiting the IRC channel (#sailfishos-porters), if you're not doing it already
Hope it helps
Click to expand...
Click to collapse
Will this os improve our device? Whats the pro and the con for a change (if it works finaly)?[emoji4]
MaxAndroided said:
Will this os improve our device? Whats the pro and the con for a change (if it works finaly)?[emoji4]
Click to expand...
Click to collapse
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
rusty88 said:
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
Click to expand...
Click to collapse
@rusty88, I am no developer/expert, but is there any way we can try and use I9300 native libraries or binaries to make GSM (or some other functionality for that matter) work? maybe RIL libs/binaries for GSM?
msri3here said:
@rusty88, I am no developer/expert, but is there any way we can try and use I9300 native libraries or binaries to make GSM (or some other functionality for that matter) work? maybe RIL libs/binaries for GSM?
Click to expand...
Click to collapse
yes @msri3here technically that is what i'm doing, its using RIL lib based on cm10.1.3 that was working fine before I flash sailfish, but on sailfish the log that RIL daemon dumps is really a mess and haven't figure out why is failing. One thing that I've notice is that RILD (one of its child process) creates the socket at /dev/socket/rild but it's killed afterwards, the sockets disappear and the process restarts all over again
Stracing RILD is not helping either as it seems that everything is Ok.
I'm trying to buy a new smartphone for day to day use so I can dedicate more time to debug on my i9300.
rusty88 said:
well maxAndroided all I can say at the moment is that the OS looks very promising... the UI is very smooth. Is another approach to mobile interaction based on gestures. I'm really loving it, sadly I can used it for day to day activities yet.
The jolla phone at the moment is able to run android apps and hopefully soon that will be available for any image built for android phones. So what that means is that if you don't find a suitable native app for sailfish os, you can always run your favorite android app in sailfish os
Anyone that wants to help bring sailfish os to i9300 is welcome to help, so if you have any idea on how to debug and fix the issues let me know
PS: if any one would like to try it, take a look at my previous post here
Click to expand...
Click to collapse
tried your rom but stuck on "samsung galaxy s 3 gt-i9300" screen nothing is happening plus if i touch the screen i get a response from the capacitive buttons but thats all