Hello everyone I have a big problem, I made the task29 but now I can not install any rom because the volume buttons are broken, there is another way to enter bootloader thanks
Try installing Quickshutdown and enabling "Bootloader" in prefs.
http://forum.xda-developers.com/showthread.php?t=742008
I can not install Quickshutdown, because I did not install anything, I had a task 29, then white screen with green logo htc
if you really cant use the volume buttons, and you have no rom on the phone, then no, there is nothing to do except get the buttons fixed.
Related
hey guys, i've just tried to Hard SPL my Touch Pro Sprint, and i thought it just need that to upgrade ROM, so i try the new ROM at my pdaviet.net forum, and guess what, i didn't unlock the phone at all, so when i finished upgrading the ROM, my TP just boot to "Touch Pro" screen (the first flash screen) and it freezes, even the small red line of information don't show up, i've tried to up the ROM again and again lately, but still no luck, anyone has any idea? i'm so upset about this, all my money has gone for this phone, is it dead, do i have to change the flash (it is so expensive to do that )
you must enter the bootloader screen.
here's how:
press and hold the volume down+the power button on top of your touch pro, then with them two pressed down insert the stylus into the reset hole. now with all three of those pressed down wait untill the tri-color (bootloader) screen comes up then release all the buttons. from here you can plug your phone to your pc and reflash. i would flash to a stocked sprint rom first then try a diffeent rom. let me know if this helped.
This is my first post, so hy guys...... (i hope ive posted it on the wright location)
when i'm pressing the Turn on button it comes only the green "HTC" logo in the middle Without the system information in the left bottom i've to be onest im getting scared cause ive tried a lot of hard reset and nothing happens....
another problem is that i cant connect it at the pc because the connection by usb dont work.....what can i do?????
you're device is stuck just before flashing a rom (that happens when you perform task29 for instance)
Quote: "If you get a white screen with "hTC" in the middle then you need to take out your battery and enter bootloader mode manually before continuing (take battery out and put it back in, then hold the volume down button and briefly press the power button. Keep holding the volume down button until the bootloader screen appears)"
after that you can flash your device with any rom
Good Luck
get into bootloader mode and then flash a newer radio ROM. solved the problem for me.
p.s. read thoroughly about the correct radio for ur phone before flashing one
abuawab said:
you're device is stuck just before flashing a rom (that happens when you perform task29 for instance)
Quote: "If you get a white screen with "hTC" in the middle then you need to take out your battery and enter bootloader mode manually before continuing (take battery out and put it back in, then hold the volume down button and briefly press the power button. Keep holding the volume down button until the bootloader screen appears)"
after that you can flash your device with any rom
Good Luck
Click to expand...
Click to collapse
it work mate thank you a lot!!!
anytime
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
Hello! I don't know where i should post this since the UMI X3 device isn't on this site, so i just post it here...
I installed a custom rom, now it's bootlooping.
If i turn it on it will show the little boot splash screen, then the screen will go black and usually it would show the boot loading screen but it doesn't, it reboots again to the boot splash screen.
I tried searching on google, but none of the forum posts actually helped me.
I try to holds down the power button and the volume up button at the same time, but it will just do the same bootloop thing.
The home button is a touch button, and i actually already tried holding down on that but it didn't work.
I also tried holding power button and volume down, and i tried holding all the buttons down at once (power + volume up and down)... also no succes.
Now it used to work, i got into some chinese bootloader before i installed this rom.
So, basicly it won't get into any recovery. I did install clockworkmod recovery actually and it did work, yet i needed to launch it via mobile uncle tools to get into it. I think im totally ****ed now...
Pleace, is there ANY way to solve this problem?
Problem in a nutshell:
Boot looping splash screen, can't get into recovery mode. (PS: i also tried to connect it via USB but it won't find my phone...)
- Kyran
UPDATE:
I'm now able to get into recovery mode!
However i can't mount usb.
Same problem
Kyranio said:
I'm now able to get into recovery mode!
However i can't mount usb.
Click to expand...
Click to collapse
Hi Kyriano,
I have the same problem after installing the cynogenmod, does your phone work now. How did you get in the recovery mode??
posible solution
Hi,
After struggling with this issue all day i found a quite simple solution.
The cause of the bootloop in my case was the simcard. So this is what i did:
1. remove simcard tray
2. Turn the phone off and on
3. If everything is ok the bootloop stopped, if not try to reboot again
4. Download mobileuncle in the playstore
5. Open the app click on; into recovery mode
6. Recovery will open and then hopefully you made a backup.Restore it and voila!
If you did not make a back try to flash the official umi ROM.
I hope this solved your problem to.
Greets ryan
hey guys.. i finally decided to change the laggy stock rom to the latest cm11 mod
installation was okay and all.. when the phone started, it kept saying keyboard stopped working
okay i figured that i copied the wrong gapps .. now comes the real problem,
i tried to boot into recovery by holding power and up/down both didnt work
is there a tool to flash the cmw into my phone from my pc then patch the right gapps?
my phone is pretty useless now so please any answer should help thanks.
This is an idea i give you, i don´t know if your home button or power button are working fine but i had that problem when i started this rom installing addiction, my home button was a little damaged so if i want to enter to recovery i have to press it hard. Maybe you should give it a try pressing harder the buttons. Just an idea.
@medothe1: you are more efficiant, if u use the usual buttons to start recovery: power & louder & menu.
When logo bootloader appears, release power-button.
Can get to settings