Could someone please advise me how to remove Clockwork Recovery from my Streak? I have to send an old unit back for warranty reasons and id like it to look stock when I do so.
Any help is appreciated.
Grab MultiRecoveryFlasher and follow the instructions to flash (your) original recovery.
Good Luck.
Any tips on how to remove CWM from a Dell Streak 7 Wifi only version? Or on how to get it back to stock?
Any help would be awesome!
rattlehead02 said:
Any tips on how to remove CWM from a Dell Streak 7 Wifi only version? Or on how to get it back to stock?
Any help would be awesome!
Click to expand...
Click to collapse
If you look in the Dell Streak 7 forum there are several threads there on how to recover the Streak 7 back to factory state.... The one I found most useful was the NVFlash method, you pretty much just download the files (does take a while) place a folder with all those files in your C: drive, connect the Streak with certain buttons pushed (can't remember) and that puts it the mode it needs to be in. It will install the drivers and then you just run a .bat file, it takes about 2 minutes to flash all that to the Streak.
It does take a few hours to download everything though, but you will have a stock Streak when you are done
cdzo72 said:
If you look in the Dell Streak 7 forum there are several threads there on how to recover the Streak 7 back to factory state.... The one I found most useful was the NVFlash method, you pretty much just download the files (does take a while) place a folder with all those files in your C: drive, connect the Streak with certain buttons pushed (can't remember) and that puts it the mode it needs to be in. It will install the drivers and then you just run a .bat file, it takes about 2 minutes to flash all that to the Streak.
It does take a few hours to download everything though, but you will have a stock Streak when you are done
Click to expand...
Click to collapse
I tried that and it didn't work. Those files are apparently only for the 4g T-Mobile Streak 7. In fact all the threads I saw about recovering a Streak 7 to stock were about the T-Mobile version.
Couldn't you just take the original recovery.img if it's around and flash as you would flash normally?
BlueCrystal said:
Couldn't you just take the original recovery.img if it's around and flash as you would flash normally?
Click to expand...
Click to collapse
I have access to a stock Streak 7 Wifi only. Is there a way to get it off there? If not, I haven't seen any good links for a Wifi only recovery.img.
Related
Hi
I looked around and saw a few ppl having trouble while rooting vibrant.
I've put update.zip on /sdcard, and when i reboot my phone in recovery mode it says something about my package not being signed.
So i googled and did this:
java -classpath "/home/ohai/Downloads/android-sdk-linux_86/tools/sign/testsign.jar" testsign update.zip file-signed.zip
(don't worry, i'm not that stupid, i DO have the sdk and the testsign installed here)
then renamed file-signed.zip to update.zip and replaced it on /sdcard, but still got the same message.
Does anyone have a link to a actually working update.zip to vibrant's froyo?
i'm using froyo.UVJL4, downloaded from samfirmware.com.
Thx in advance
?
Sent from my SGH-T959 using XDA App
Everyone's update.zip is usually different is what i'd think.
try getting titanium backup, click menu and click menu, and then CREATE update.zip
that might help you out.
Go to dec section and look for the jl4 rom from geodude(cant remember exact name...) His rom, odex or deodex both come prerooted with the 3e recovery fix as well. Flash that. KTB.
Sent from my SGH-T959 using XDA App
If you are comfortable using the voodoo lagfix you can flash the new voodoo 5 kernels. They come with the SU binary and clockworkmod recovery built in. Then download busybox and superuser from the market. You'd have to flash via ODIN though.
Thx for the tips, but i was not thinking about using modified roms... all i want is to root my default rom from samsung, is it possible?
You need the correct key to sign the zip file. My understanding is this key was not released by Samsung so you will not be able to sign your update.zip files to work with the 3e recovery.
The 2e recovery accepted a "test key" which is why we're able to use update.zip to root and use CWM.
The RATC method still works for rooting in the 2.2 Firmware. You can use SuperOneClick to root, and then replace the stock 3e recovery with the one from here. This is a modified 3e recovery which removes the signature checking.
How about trying the ALT METHOD in the Noob Guide (my signature)... then flash a stock rom with root?
http://forum.xda-developers.com/showthread.php?t=857974
personally, you are hurting yourself by not running a rom like Nero v3 or Eugenes Ginger Clones.
Rooting T-Mobile Vibrant Froyo 2.2 JL5
I have the T-mobile Vibrant US Phone. I upgraded to JL5 and have rooted my phone with a program from here:
http://forum.xda-developers.com/showthread.php?t=803682
Get the latest version and you might have to run the program 2 or 3 times for it to finish. Note on my phone these were the steps I took.
1. Put phone in USB Debugging Mode.
2. Plug usb cable to computer.
3. Run the rooting program above with windows administrator rights.
4. It will run then probably hang half way through and indicate WAITING FOR
DEVICE.
5. Shut windows program down.
6. Reboot phone (Turn Off then On).
7. Reconnect to usb.
8. Restart the Rooting Program and Root.
9. It should finish and ask if you want to test SU say yes.
10. That's It you should be good to go.
Hope this helps.
s15274n said:
How about trying the ALT METHOD in the Noob Guide (my signature)... then flash a stock rom with root?
http://forum.xda-developers.com/showthread.php?t=857974
personally, you are hurting yourself by not running a rom like Nero v3 or Eugenes Ginger Clones.
Click to expand...
Click to collapse
What's so good in those roms?
NihtSpi said:
I have the T-mobile Vibrant US Phone. I upgraded to JL5 and have rooted my phone with a program from here:
http://forum.xda-developers.com/showthread.php?t=803682
Get the latest version and you might have to run the program 2 or 3 times for it to finish. Note on my phone these were the steps I took.
1. Put phone in USB Debugging Mode.
2. Plug usb cable to computer.
3. Run the rooting program above with windows administrator rights.
4. It will run then probably hang half way through and indicate WAITING FOR
DEVICE.
5. Shut windows program down.
6. Reboot phone (Turn Off then On).
7. Reconnect to usb.
8. Restart the Rooting Program and Root.
9. It should finish and ask if you want to test SU say yes.
10. That's It you should be good to go.
Hope this helps.
Click to expand...
Click to collapse
JL5?
where did you get it?
atcasanova said:
What's so good in those roms?
Click to expand...
Click to collapse
You still can't get rooted & you want FroYo?
I attached cwm update.zip so just use that to get into CWM Recovery (Reinstall Packages, You may need to do it twice) and then just flash the following ROM
http://forum.xda-developers.com/showthread.php?t=881692
Master™ said:
You still can't get rooted & you want FroYo?
I attached cwm update.zip so just use that to get into CWM Recovery (Reinstall Packages, You may need to do it twice) and then just flash the following ROM
http://forum.xda-developers.com/showthread.php?t=881692
Click to expand...
Click to collapse
Sorry for being this dumb, but i don't have a clue of what is CWM
me too,
im desperately looking to root my vibrant from Bell canada. i just updated to JL2 using the kies pc software. i just got this phone for xmas so im quite new to it.
im hoping to find an app or website that can do most of the steps for me. or a youtube video with detailed step by step.
ive tried using the guide that s15274n wrote (btw, thanks for the awesome writeup) but i have the same problem of the update.zip file not passign the signature verifaction.
i would like to stay with a stock ROM for at least another couple weeks because of the super high chance of this phone bricking itself
my phone has a build date of 11.10
any thoughts?
thank you VERY much for any help
EDIT:
I have managed to root my phone! hurray!
heres how i did it:
i used the superoneclick method thanks to this link http://forum.xda-developers.com/showthread.php?t=803682
i used this guide to help me through the steps http://theunlockr.com/2010/10/11/how-to-root-your-android-phone-superoneclick-method/
thanks to everyone to put in work to make this possible.
THANK YOU!
chucked said:
me too,
im desperately looking to root my vibrant from Bell canada. i just updated to JL2 using the kies pc software. i just got this phone for xmas so im quite new to it.
im hoping to find an app or website that can do most of the steps for me. or a youtube video with detailed step by step.
ive tried using the guide that s15274n wrote (btw, thanks for the awesome writeup) but i have the same problem of the update.zip file not passign the signature verifaction.
i would like to stay with a stock ROM for at least another couple weeks because of the super high chance of this phone bricking itself
my phone has a build date of 11.10
any thoughts?
thank you VERY much for any help
EDIT:
I have managed to root my phone! hurray!
heres how i did it:
i used the superoneclick method thanks to this link http://forum.xda-developers.com/showthread.php?t=803682
i used this guide to help me through the steps http://theunlockr.com/2010/10/11/how-to-root-your-android-phone-superoneclick-method/
thanks to everyone to put in work to make this possible.
Click to expand...
Click to collapse
So many people figure out what was wrong and they are done. Thank you for posting your finding, I have been trying to Root my Bell Vibrant for a while.
Use SuperOneClickRoot - http://forum.xda-developers.com/showthread.php?t=803682
Works all the time for Vibrant!
Hello,
I bought a dell streak from ebay yesterday running Streakdroid 1.61. Everything was working well when i received it, but I couldn't get access to market because the orignal owner's gmail account was linked to the device. I registered my gmail but it was still not giving me access. I decided to remove his account and the phone prompted that some apps were linked to it so i needed to factory reset.
Since then after flashing Streakdroid1.61 it showed unser clockworkmod recovery menu: E: CAN'T FIND MISC.
After searching I flashed Streakmod Recovery but no matter how many reflashes and reboots and resets phone gets into a continuous booting loop after getting to android logo screen. I feel like trying my hair out. Haven't been able touse my new phone and I have read and tried lots of solutions from here and modaco forum but no joy.
Please help me somebody.
Thanks
Why don't you start off with the QDL Tool and get to 2.2 v305, from there flash streakmod recovery, boot up, download 1.61 or what ever Rom you want. Then reboot and install from zip on SD card. that way you get it from scratch and not have to worry what the other user did to it.
tenorntex said:
Why don't you start off with the QDL Tool and get to 2.2 v305, from there flash streakmod recovery, boot up, download 1.61 or what ever Rom you want. Then reboot and install from zip on SD card. that way you get it from scratch and not have to worry what the other user did to it.
Click to expand...
Click to collapse
Thanks for the reply but I have no idea about the QDL Tool, will have to do a read up then.Or can you guide me?
Use the StreakMod recovery instead of clockwork. It's modified to work with the Streak.
Article
Forum Thread
I am using that, found out on this forum but still no joy.
ZINXYX said:
Thanks for the reply but I have no idea about the QDL Tool, will have to do a read up then.Or can you guide me?
Click to expand...
Click to collapse
Here is the guide for the QDL Tool.
http://streakdroid.com/?page_id=92
Thanks bud, my streak is now working.
Hi all,
I was installing custom roms back in the xda 2 days but eventually moved over to iphone and now im swtiching to android. (I love the new site by the way!)I have an (o2) streak arriving tomorrow and would like to get the best out of my device.
I have tried my best to do my research over the past few days before making my first post and now I have some questions if I may...
To flash a rom I need to:
1. Install fastboot
2. Root device using androot or superboot
3. Install clockworkmod recovery
4. Download rom and flash to device
If my device comes with 1.6 I need to update to 2.1 first.
Roms...
The ROMs I have come across so far:
- O2 2.2
- Custom Streakdroid by Djsteve http://streakdroid.com/?page_id=15&did=26
All others that I have seen seem to be in alpha.
So am I right in thinking that streakdroid is the most advanced but stable rom so far?
Is there any backup tools / failsafes that I can use before starting all this?
Do I need to worry about baseband? Do I follow this?...
"IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+"
If somebody let me know if I've understood the above correctly and if I'm ok to proceed with flashing tomorrow?
Any help is greatly appreciated and it's good to be back!
Just update to stock 351, I find that to be very fast and super stable.
Sent from my Motorola DynaTAC using XDA Premium App
Thanks for the reply,
I have done some searches and it seems stock 351 is the latest non-custom rom. Is this what I will recieve from o2 in the OTA upgrade? Am I not missing out on a load of extra features if I use this instead of a custom rom?
Thanks
Go for steves rom i am on o2 uk flashed the 351 a bit slow 4 me went back to the streak savier u will love 190
Sent from my Dell Streak using XDA App
http://forum.pocketables.net/showthread.php?t=9694
What's 190?
Radimus, if I follow that guide can I flash a custom rom?
Have I understaood the process correctly in my original post? My Streak is here and I want to do this tonight.
Thanks
If anyone is available to help me over skype chat I will put £10 into their paypal account for their help. Thanks
my skype id: phraseone.co.uk
garethsimpsonuk said:
What's 190?
Radimus, if I follow that guide can I flash a custom rom?
Have I understaood the process correctly in my original post? My Streak is here and I want to do this tonight.
Thanks
Click to expand...
Click to collapse
read the FAQ in the second post : http://forum.pocketables.net/showthread.php?t=9694
Thanks that answers question 2 but what about 1 and 3?
Regards
I carried out all previous steps and now this is what I've done:
1. copied update-1.6.1.zip to the root of sd card. It said I needed to copy a .pkg but the streakdroid package comes in a zip so i copied that on instead.
2. Installed the recovery image
3. Booted into recovery menu and selected update via update.pkg on sd card.
Now the streak has the Dell logo with an ! exclamation mark and it's just sitting there. Have I done it correctly? It says it takes 10 minutes but I'm a bit worried because there is no progress meter there.
Some one please let me know if I've done the right thing as I'm too scared to touch it now in case I brick it!
Thanks
Ok i figured i had to press the power button to get the menu but now i cant get the menu back! Every time I select the option it tales me to: android system recovery utility
When I try to do a recovery it says verification failed...any pointers?
It depends on what you have done so far. You are best starting with the latest official update for your phone using system update, then installing the fastboot drivers on your pc, installing new recovery, either streakmod or clockworkmod and then installing djsteves over that if you want a custom rom.
Instructions for each step are evident in forums, but If you require further assistance, just ask
Sent from my Motorola DynaTAC using XDA Premium App
Thanks for the reply. I flashed the recovery again and it allowed me into the advanced menu again which enabled me to flash. It's all working now but I have just noitved 1 thing....
I flashed with update-1.6.1.zip from http://streakdroid.com/?page_id=15 but have just found update-1.9.0.zip from here http://forum.xda-developers.com/showthread.php?t=1003525
Am I right in thinking that I have just flashed with an older version? If so, I will do it again.
Another question...if I flash with a new rom I must lose all my data?
When it's on the dell exclamation screen you press the power button to bring up the recovery screen.
Posted with StreakZilla, using XDA App.
hello everybody!
i have problem with installing Streakdroid 1.9. i have tried with clockworkmod recovery but it will not boot into recovery. i don't understand why this happens. So i'm trying with streakmod but i do not know how to install with fastboot, i have installed fastboot on my pc and started in command prompt and i don't know what to do next. so is there any step by step how to do it?
heeelp!!!
Yeeeessss!!!
Here is the fastest way to install streakmod!
Go to http://ilikemygooglephone.com/2010/...-streak-for-windows-mac-linux-andorid-2-12-2/ ,
download files and follow the steps, in folder Streak_iLikeMyGPhone replace recovery with latest recovery from http://forum.xda-developers.com/showthread.php?t=840326 and click 'install-recovery-windows' (this is for windows)
I hope this will help others.
I had to do it twice, but it worked! Thank you for this simple guide! Worked on the Mac OS!
Yes, I had to do it twice too, I do not know why, but it works.
And there is also for linux and MacOS.
Streakmod install issues
Hey I have a Dell Streak on ATT (unlocked) that I am trying to breath new life to its 2.2 Froyo operating system. I am trying to flash DJ Steves Gingerstreak 2.4.4. I found what I believe to be simple instructions once I have StreakMod installed on my Phone. Can anyone help me get this set up? The link in this post seems to be spam, some sort of video player.
I have loaded Streakmod on the computer, have been sucessful with CDL tool and the initial root from 1.6 to 2.2. But I have to do something till I can swing the new G-note
any detailed help on getting/installing Streakmod up and running would be great.
Thanks
Ramhvac,
Better skills searching would be of great aid to you.
Streak Flashing guide
XDA Streak Wiki
My take on modding the Streak
Useful Streak Links
marvin02 said:
Ramhvac,
Better skills searching would be of great aid to you.
Click to expand...
Click to collapse
LMFAO
Marvin, you are too kind
Ramhvcac,
At least you know to use StreakMod and not cwm/rom manager
Thank you, I was expecting to get some crap(Marvin), so I put on my big boy pants before I posted, But I have been so busy that my searches have been sporatic and not continous. I am hoping to have Gingerbread on my Streak this weekend.
again thank-you in advance, for your help.
BIG Trouble with GingerStreak update
Ok, I have flashed the amss and dsp1 files, installed the txt file, re-booted and went into streakmod recovery and loaded Gingerstreak 2.4.4. The phone booted up after 5+ minutes the update seems great except phone does not work.
I get the message"The process com.android.phone has stopped working unexpectedly. Please try again".
Any suggestions? the phone does not seem to reconize my sim card.
Att white Dell streak 5, running Gingerstreak 2.4.4 But no phone!!
Panjabi1985 said:
hello everybody!
i have problem with installing Streakdroid 1.9. i have tried with clockworkmod recovery but it will not boot into recovery. i don't understand why this happens. So i'm trying with streakmod but i do not know how to install with fastboot, i have installed fastboot on my pc and started in command prompt and i don't know what to do next. so is there any step by step how to do it?
heeelp!!!
Yeeeessss!!!
Here is the fastest way to install streakmod!
Go to http://ilikemygooglephone.com/2010/...-streak-for-windows-mac-linux-andorid-2-12-2/ ,
download files and follow the steps, in folder Streak_iLikeMyGPhone replace recovery with latest recovery from http://forum.xda-developers.com/showthread.php?t=840326 and click 'install-recovery-windows' (this is for windows)
I hope this will help others.
Click to expand...
Click to collapse
i flashed it and everything but i still get insert a SD card containing an update file(/sdcard/update.pkg) when i try to get into recovery. can you help me out?
nvm i got it
Ramhvac said:
Ok, I have flashed the amss and dsp1 files, installed the txt file, re-booted and went into streakmod recovery and loaded Gingerstreak 2.4.4. The phone booted up after 5+ minutes the update seems great except phone does not work.
I get the message"The process com.android.phone has stopped working unexpectedly. Please try again".
Any suggestions? the phone does not seem to reconize my sim card.
Att white Dell streak 5, running Gingerstreak 2.4.4 But no phone!!
Click to expand...
Click to collapse
Did you do a factory reset?? (not in streakmod / clockwork)
Do it from dell recovery..
Not sure why people still install gingerstreak anymore. fards left and it seems support has stopped??
Thanks so much. I've tried it with my streak official rom 2.3 and done it without any problem. In my opiion,this is the easiest way to do.
Not sure what happened here. But basically took a totally stock US ATT Unlocked streak and tried upgrading to the Gingerbread 2.3.3 version. Upon doing this, everything flashed correctly but I was stuck at the Dell screen-15 minutes. Pulled the battery and same thing, pulled it again and it actually started loading up. It loaded up and immediately force closes a bunch of things. Tried flashing it again with no luck. Tried flashing the latest ATT recovery with update.pkg and again, stuck at Dell screen. However if I flash CWM and load a custom ROM, it will load into the ROM but immediately force closes everything and it also isn't reading my SIM card. What the heck did I do?! Please help
could we have more details about your flashing procedure?
Have you done a wipe of the dalvik cache and a factory reset? Skipping those two are the most common cause of FC's.
Sorry guys. Initially. I installed the fast-boot drivers, got the phone in fast-boot mode and recognized by the PC. Gather the correct files and flashed the 407 recovery, rebooted and then flashed the update.pkg through the stock recovery manager.
After this failed. I flashed CWM. Wiped it totally and then tried two different custom roms and also installed the amss and dsp1 and still both would instantly start force closing.
I'm a desperate move I did QDL last night and everything was successful, however I attempt to install the latest stock recovery and update.pkg and I'm still getting stuck at the Dell logo.
Try the recovery from 360.
kurdo_kolene said:
Try the recovery from 360.
Click to expand...
Click to collapse
From my understanding. QDL sets the phone back to 305 recovery to be flashed. Should I try installing that, or as soon as QDL finished install the 360 recovery with the 360 update.pkg?
flash the 360 recovery in fastboot mode, reboot into recovery mode and install the 407 update.pkg. After it is installed do a factory reset.
That method isn't working. I flash the 360 recovery in fast boot and loaded the 407 update to the SD card and renamed it. Upon flashing the update I get a "error in SD card \SDcard\update.pkg.dec"
Do I need to add that extension or what's going on here? I'm using the files provided on the Dell Wiki Rom list btw.
quickbird144 said:
That method isn't working. I flash the 360 recovery in fast boot and loaded the 407 update to the SD card and renamed it. Upon flashing the update I get a "error in SD card \SDcard\update.pkg.dec"
Do I need to add that extension or what's going on here? I'm using the files provided on the Dell Wiki Rom list btw.
Click to expand...
Click to collapse
On the wiki page there is also a link for hashes. Click on it and compare the hashes listed with the hash for the file on your local computer. If you have a bad DL the hash will not match.
If the hash matches then try using the 407 recovery, instead of the 360.
Also see this post in case you are coming from 347. I guess that there are issues updating from BB 347.
The easiest way to generate a hash for files in Windows (IMO) is to use the HashCheck shell extension. You right click on a file in Windows Explorer, select properties, and then a tab to view the hashes for a file.
marvin02 said:
On the wiki page there is also a link for hashes. Click on it and compare the hashes listed with the hash for the file on your local computer. If you have a bad DL the hash will not match.
If the hash matches then try using the 407 recovery, instead of the 360.
Also see this post in case you are coming from 347. I guess that there are issues updating from BB 347.
The easiest way to generate a hash for files in Windows (IMO) is to use the HashCheck shell extension. You right click on a file in Windows Explorer, select properties, and then a tab to view the hashes for a file.
Click to expand...
Click to collapse
I've followed everything you just said. I've checked hash files and all are matching. However when you talk about 347, I QDL'd and it put the recovery back to 305 unlocked.
I try to update viaSD card immediately after but it says it can't find the update blah blah. So from 305, I want to flash the appropriate recovery either 360 or 407 and install the 407-update.pkg correct? Then after it reboots from there, do a factory reset? I feel as if I'm very close, just gotta find the right tunnel. I do greatly appreciate all of the help thus far!
Here's a little update to bring everyone where I'm at.
I QDL and then flashed the 407 recovery. Grab the 407 update, rename it and put it on the SD. I flash via update from SD card, everything goes by. It reboots and I'm still stuck at the Dell logo.
After about 15 minutes of this, I pull the battery and then it goes to "Start recovery copy" and then reboots. Then brings me BACK to flashing the stock recovery but this time wants me to flash the 305 recovery??
quickbird144 said:
I've followed everything you just said. I've checked hash files and all are matching. However when you talk about 347, I QDL'd and it put the recovery back to 305 unlocked.
I try to update viaSD card immediately after but it says it can't find the update blah blah. So from 305, I want to flash the appropriate recovery either 360 or 407 and install the 407-update.pkg correct? Then after it reboots from there, do a factory reset? I feel as if I'm very close, just gotta find the right tunnel. I do greatly appreciate all of the help thus far!
Click to expand...
Click to collapse
If you flashed back to 305 with the QDLTool and can get to fastboot I suggest:
Put the rom file on your SD Card. Make sure it is named update.pkg.
Use fastboot to flash the recovery that matches the ROM, in this case the 407 recovery
use fastboot reboot from the command line to reboot the phone and hold down both volume buttons as it reboots to go directly to the 407 recovery you just flashed. Do not let the phone boot normally or you will have to start over.
Now select the second option to update to 407.
This will wipe all settings, apps, ect., from the phone.
---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ----------
I believe that we cross posted. If you have done the steps in my previous post and are still stuck when you flash the 407 recovery also flash the dsp1.mbn and amss.mbn files for 407 then reboot immediately to recovery and do the update.
The phone is pretty much dead now so I'm going to let it charge before I give it another go.
But I believe my problem is dsp1 and the amss files. That's one step that I have not done yet. I think I'm going to QDL again and from there do as you stated.
I did have one question though. My phone was factory unlocked, through all this, is that unlock gone?
Thanks again and I will report back with the results!
quickbird144 said:
. . .
I did have one question though. My phone was factory unlocked, through all this, is that unlock gone?
. . .
Click to expand...
Click to collapse
From what I have read flashing a ROM does not effect the unlock status. I also have an unlocked Streak but have never used it with any other carrier except AT&T so I can not comment from personal experience.
FIXED!!!
I'm back in business!!!
I used the QDL streakflash then the QDL repair tool. Didn't feel like messing around with all those update.pkg's and stupid recoveries so I just flashed CWM recovery, flashed the basebands for Ginger Streak 2.4.4 and it's back up and running!!!!
THANKS A LOT to everyone that helped. I've lost tons of sleep over this and have been up all night trying to get this right and it all paid off. I'm happy
quickbird144 said:
I'm back in business!!!
I used the QDL streakflash then the QDL repair tool. Didn't feel like messing around with all those update.pkg's and stupid recoveries so I just flashed CWM recovery, flashed the basebands for Ginger Streak 2.4.4 and it's back up and running!!!!
THANKS A LOT to everyone that helped. I've lost tons of sleep over this and have been up all night trying to get this right and it all paid off. I'm happy
Click to expand...
Click to collapse
congratulation!!! somehow i just can"t go back to stock rom
Glad you got it going. . . . Done the QDL tool acouple times myself
posted from my Pimped out Dell