Does anyone know the trick to successfully resizing widgets in TouchWiz 4?
I've managed it a couple of times by luck, but can't reproduce it when I actually want it
I think it only applies to a couple of widgets, like the notepad and weather ones were the only ones I managed. Press and hold the widget until it gets picked up then drop it where it is...it should come up with a grid allowing you to resize it.
Yeah, that seems to be the trick. "Agenda" lets you resize it too, but its a bit random as to how much.
Related
I pushed it to the NC and while it worked, I found that it became downright amazing once I used the unlock code I had purchased for my EVO.
*Widget resizing was always weird and stupid on my Evo. I set my NC to do 10x10 rows on the homescreen and when adding widgets they looked odd...finally I see a reason for the widget resizing. It fixed the widgets very well.
*Dock shortcuts crash LP, but when you unlock LP you can add swipe gestures and those work fine. So basically, it seems at this point you need to swipe to launch apps/etc because tapping the dock won't work.
*With all the screen real estate, I think 3 home screens is going to be more than enough for me (though I have yet to fill up 1). You can fit so much into it that the 7 I use on my Evo seems quite excessive.
I'd love to know if anyone can figure out how to use the dock icons as usable shortcuts.
What version you running?
I am using the latest launcher pro version and launcher pro resets when I try to add shortcuts to the homescreen.
Any ideas?
I got the same problem.. The only icon that works on the dock is the web one.
It successfully launches dolphin HD.
If I try to modify the other default icons, I can change their icon, but it will not launch any app that way. It gives the "Cannot complete requested activity."
I love this compared to the default, its so smooth! but I need to know that I can fix the problems before I'll shell out the money, haha.
Has anyone gotten this stuff to work?
Perhaps using a different version?
But you can add your own shortcuts.
Those icons refer to functions that the Nook doesn't natively support. SMS, contacts and phone. To me that's a small nuisance, hardly noticeable anymore. I'm sure these will get ironed out.
skyhawk21 said:
What version you running?
I am using the latest launcher pro version and launcher pro resets when I try to add shortcuts to the homescreen.
Any ideas?
Click to expand...
Click to collapse
Go to the app dock, where you can see all of your apps. Simply tap n hold the app icon you want on your Launcher Pro homescreen, and you'll automatically be taken to the homescreen with the app still "captured", awaiting you to place it anywhere.
I would like to make my homescreen look like the one attached.
This is a little mockup I have made. Even if I can get the shortcut list going on the side would be nice. I'm not so sure about the tiles after I finished drawing it.
Any ideas on widgets/launchers is appreciated before I have to actually code something myself. I have been trying to look for widgets etc. that can help me but have come up empty.
Things like this have been done before. Search Android Phone 7. I've never seen one with that app list sidebar. That may be a little hard to recreate but it isn't impossible.
Things you'd need: Icons, Desktop Visualizer, ADW EX or Launcher Pro Plus (Plus is needed for resizing widgets) Minimalistic Text, maybe Phantom Music Control. For the icons like "Games" or "Utilities" you may be able to link the DVR widget to an app called Folder Organizator. Or you could use a widget called SiMi Folder, which would make a shortcut on your homescreen that is like the iPhone's folder thing. You could make the icon of the SiMi Folder transparent.
This is going to take A LOT of resizing, which can get really boring. To avoid headaches, plan everything out before you start. If you want a widget above another widget, the widget you want on the bottom (background) needs to be placed BEFORE the widget you want in front (foreground). You are going to have to resize it over the other widget, not place it on top.
That's all I can think of for right now. The left side should be pretty easy. The right side on the other hand will be a little challenging. My best advice would be to start by making a big plain minimalistic text (MT) widget, then add each app name as a MT widget with a blank background (option is in the MT widget configuration menu) For some help, try the Hubs layout in the Asus Transformer Theme and App section. We have a nice thread there with a similar idea and people there will be more than willing to help. They are a lot better at home screen customization than me.
Anyways, awesome idea! If you make the icons, I'll be happy to help you recreate it!
Thanks for the reply. I've played around with Minimalistic Text and it looks promising, thanks. I had noticed it several times before, but it does not mention it can function to create normal shortcuts too.
Just buying ADW Launcher EX (first purchase, borrowing a debit card now), as I have been using the free version for a while. Will post an update when it goes through and I can play with resizing the widgets.
I am currently playing with Minimalistic Text and I have the text on the screen, but when I assigned the proper functions I found they overlap each other...
Anyone know how to avoid this? (They are created using 5x1 horizontal widgets)
BeaverusIV said:
I am currently playing with Minimalistic Text and I have the text on the screen, but when I assigned the proper functions I found they overlap each other...
Anyone know how to avoid this? (They are created using 5x1 horizontal widgets)
Click to expand...
Click to collapse
Resize the widgets. I dont know how its done in ADW but i think you can do it by long pressing them.
I have, they are the smallest they can go. The resize outline box is 1 unit high, but when I push the 'button' it shows a 2 unit high selection box...
I'll see if I can get a s/s of each box...
Edit: Nope, too tricky to get the timing.
reminds me of wp7
if you wanna something like that try Launcher 7
https://market.android.com/details?id=info.tikuwarez.launcher3
else you can use desktop visualizer (like mentioned before)
i am using desktop visualizer,too.
but i noticed when you have to restart your phone it takes a while to reload the widgets
How ever it's still fine
I used to use DVR when I first got my phone. The tile layout on the left was an experiment, I don't think I'll use it. The main thing was the right hand side; the list of shortcuts.
Well I worked around the overlapping issue by reapplying them in a different order so they underlap instead.
Now I'll work on another layout I like for the rest of my icons, thanks guys
PS: @restarting phone: Who does that?
Edit: For anyone who cares:
Use MT to make a 5x1 widget, use the vertical top alignment and both horizontal ones right.
Don't show background.
Choose custom layout and remove the three existing sections and add a 'static text' one from under Misc.
I choose normal (not default) text and change it to 30dip (that fits my applications nicely on my 800x480px screen).
Choose launch another application and choose the application you want to launch.
Start from the bottom of the screen and work your way up, placing the background last.
BeaverusIV said:
I used to use DVR when I first got my phone. The tile layout on the left was an experiment, I don't think I'll use it. The main thing was the right hand side; the list of shortcuts.
Well I worked around the overlapping issue by reapplying them in a different order so they underlap instead.
Now I'll work on another layout I like for the rest of my icons, thanks guys
PS: @restarting phone: Who does that?
Edit: For anyone who cares:
Use MT to make a 5x1 widget, use the vertical top alignment and both horizontal ones right.
Don't show background.
Choose custom layout and remove the three existing sections and add a 'static text' one from under Misc.
I choose normal (not default) text and change it to 30dip (that fits my applications nicely on my 800x480px screen).
Choose launch another application and choose the application you want to launch.
Start from the bottom of the screen and work your way up, placing the background last.
Click to expand...
Click to collapse
OO thanks! I'll wait til you finish the whole thing to try it out but it looks like its going to be awesome.
I'll post a new thread when I've accomplished it
Hi
is there any progress on this topic? is the new thread already open?
It's 12:40am here. A new thread will be made tomorrow after I've finished the homescreen.
I just installed CM7 on my Nook and I'm trying to get my home screen setup. For some reason there seems to be a lot of wasted space between rows. Is there anyway to adjust this? My widgets are also getting stretched way across the screen.
You are using Gingerbread, not ICS, so no, widget is not resizable.
You can move it, you can stretch it and it snaps automatically in a certain region.
I know it's ugly, I feel you.
pharpe said:
I just installed CM7 on my Nook and I'm trying to get my home screen setup. For some reason there seems to be a lot of wasted space between rows. Is there anyway to adjust this? My widgets are also getting stretched way across the screen.
Click to expand...
Click to collapse
I use ADW.Launcher EX on my nook and it works wonderfully. You can.change the amount of columns and rows that the desktop has and then drag Widgets to resize them. You can also set it to use HDPI.Icons on the MDPI Nook and it makes them look big and clear. I would recommend spending the money on it, its worth it.
Sent from my CM7.1'd, ICS Themed NookColor using Tapatalk
To begin with, I'm far from new to Android, just new to Samsung and the Note.
Also - I know I'm not the only one with this problem but I haven't run across a solution yet. I can take and image I want to use as a wallpaper and, on the lock screen and the Touch whiz home screen and it looks exactly like I want it to. But, since I'm one of those folks who dislikes the fact that I can't swap out apps on the TW launcher bar, I slap my own launcher on the Note to make it mine again. Unfortunately, then comes the annoying part.......
Whatever photo I put up as wallpaper looses resolution and seems to explode in size so that only about 1/4 of the original wallpaper/ photo is visible and what's left is very blurry. I know this isn't limited to just one launcher - I've tried ADW, Launcher Pro, Nemus, Go Launcher, Holo, and a few more I can't remember the names of right now. And they all give me the same problem.
So far I've changed the format of the wallpaper photo to .png or .jpeg and back again, tweaked the size and resolution of the picture, dug through XDA and a few other forums fort wisdom, and used harsh language on my Note - all to no avail. So, can anyone tell me what I'm missing or if there's any hope for me at all? I'm rooted stock 2.3.6 and would prefer, for various reasons, to stay that way for now. But, at this point I'm willing to consider options if all else fails since I'm getting quite annoyed by this.
Thanks for any help/ insight!
Use the Quickpic app to set the wallpaper.
Thanks! I'll give that a shot.
Sent from this here talk tapper of mine
Hello,
I have been playing around with Themer and the built in Zooper Widgets, and I made some adjustments to widgets that are in two different themes. I wanted to get them together into the same theme, so I did it by making room on the bottom half of the screen, creating a new widget and resizing it to the same size as the widget I want to copy from the other theme. I then loaded tapped the widget, which brought up the zooper config and opened the widget that was autosaved in the first theme. When it loaded, I noticed that everything was off. Everything was tiny and pulled away from the edges of the widget. I thought it wasn't a big deal, so I went in to change the overall widget scaling to make it fill the space, and instead it hit a point where instead of resizing, it started cutting off the sides of the widget. I tried manually changing the x and y locations of the widget items, and they just get cut off instead of expanding into the rest of the widget space.
Is there a way that I can force the widget to make use of the whole widget space instead of cutting off? I've attached a picture to show where there is the empty space on the sides of the widget. Please note that the "resize" option of the widget (when long pressing on the widget and getting the options to remove, resize or configure) shows the resize handles all the way to the left and right edges of the screen, yet the widget inside of it won't fill that space.
Or maybe I'm thinking about this the wrong way. Are there settings in themer that may be different from theme to theme that would cause this sort of thing to happen even when the widgets are being used on the same phone? I thought perhaps the desktop grid (which is 8x6 in these two themes) would do it, but that doesn't seem to matter in this case since they're the same.
Thanks for your help,
Jeremy
thinker5555 said:
Hello,
I have been playing around with Themer and the built in Zooper Widgets, and I made some adjustments to widgets that are in two different themes. I wanted to get them together into the same theme, so I did it by making room on the bottom half of the screen, creating a new widget and resizing it to the same size as the widget I want to copy from the other theme. I then loaded tapped the widget, which brought up the zooper config and opened the widget that was autosaved in the first theme. When it loaded, I noticed that everything was off. Everything was tiny and pulled away from the edges of the widget. I thought it wasn't a big deal, so I went in to change the overall widget scaling to make it fill the space, and instead it hit a point where instead of resizing, it started cutting off the sides of the widget. I tried manually changing the x and y locations of the widget items, and they just get cut off instead of expanding into the rest of the widget space.
Is there a way that I can force the widget to make use of the whole widget space instead of cutting off? I've attached a picture to show where there is the empty space on the sides of the widget. Please note that the "resize" option of the widget (when long pressing on the widget and getting the options to remove, resize or configure) shows the resize handles all the way to the left and right edges of the screen, yet the widget inside of it won't fill that space.
Or maybe I'm thinking about this the wrong way. Are there settings in themer that may be different from theme to theme that would cause this sort of thing to happen even when the widgets are being used on the same phone? I thought perhaps the desktop grid (which is 8x6 in these two themes) would do it, but that doesn't seem to matter in this case since they're the same.
Thanks for your help,
Jeremy
Click to expand...
Click to collapse
Hi Jeremy,
Thanks for your detailed feedback. This is an odd problem, but that's what Zooper is all about.
This may be caused by a bug in Themer. Sometimes it says that the widget resize handles are touching the edges, when the truth is that the widget is still in the same place. Try adding it in on one side and see if the result is the same (or even multiple resize attempts). The reason I say this is because if the widget was truly the whole width of the screen - it would let you reposition the modules within the skin with ease. Let me know what happens.
Could you give me the name of both themes that you used, perhaps I could recreate the issue.
-Marco
ThemerSupport said:
Hi Jeremy,
Thanks for your detailed feedback. This is an odd problem, but that's what Zooper is all about.
This may be caused by a bug in Themer. Sometimes it says that the widget resize handles are touching the edges, when the truth is that the widget is still in the same place. Try adding it in on one side and see if the result is the same (or even multiple resize attempts). The reason I say this is because if the widget was truly the whole width of the screen - it would let you reposition the modules within the skin with ease. Let me know what happens.
Could you give me the name of both themes that you used, perhaps I could recreate the issue.
-Marco
Click to expand...
Click to collapse
Hi Marco,
I was inserting a customized version of the bottom half of the "Woods" theme into a new screen on the "Glass" theme. I was using the one that was saved in my "Autosave" list rather than one I had manually saved. Also, I tried loading it into a regular Zooper Widget PRO widget within Nova Launcher. It took a time or two, but I was able to finally get it to work and it only required minimal tweaking to get it looking good again. What I may have done wrong was not resizing the widget to the correct size before loading a the saved contents into it. (Honestly I cannot remember for sure at this point since several days have gone by. ) For example, if the widget is supposed to be 6x4, I may have had it sized to 5x4 by accident first, inserted the widget contents from the autosave, and then tried to resize it to 6x4 after, causing the weird gaps.
If I see it happen again, I'll pay more attention to the specific circumstances and give better feedback.
Thanks again for the help,
Jeremy
thinker5555 said:
Hi Marco,
I was inserting a customized version of the bottom half of the "Woods" theme into a new screen on the "Glass" theme. I was using the one that was saved in my "Autosave" list rather than one I had manually saved. Also, I tried loading it into a regular Zooper Widget PRO widget within Nova Launcher. It took a time or two, but I was able to finally get it to work and it only required minimal tweaking to get it looking good again. What I may have done wrong was not resizing the widget to the correct size before loading a the saved contents into it. (Honestly I cannot remember for sure at this point since several days have gone by. ) For example, if the widget is supposed to be 6x4, I may have had it sized to 5x4 by accident first, inserted the widget contents from the autosave, and then tried to resize it to 6x4 after, causing the weird gaps.
If I see it happen again, I'll pay more attention to the specific circumstances and give better feedback.
Thanks again for the help,
Jeremy
Click to expand...
Click to collapse
Hi Jeremy,
If that ever happens, you can always reload the skin within the Zooper Configuration Menu (instead of manually resizing everything), however this only works 70% of the time. You're welcome to watch some of our videos on the MyColorScreen YouTube channel, as there might be something to help you out there.
Regards,
Marco