Related
Hi Guys,
I consider myself noob and any type of help would be appreciated.
Can I mix Mik_os CM7 rom and Franco's 13.7 KERNEL? If its possible, What are the most simplest steps to do it?
same question. ^^
I tryed Gingerbread-2.3.4-rc2 @2011-05-22-21.00+GMT0 + Franco and didn't work. I think it will not work too.
Kheepur said:
Hi Guys,
I consider myself noob and any type of help would be appreciated.
Can I mix Mik_os CM7 rom and Franco's 13.7 KERNEL? If its possible, What are the most simplest steps to do it?
Click to expand...
Click to collapse
I have mixed various mik's CM7 with franco kernel and never had any problem, currently using beta CM7 6.5.1 with franco kernel 13.7.2
char101 said:
I have mixed various mik's CM7 with franco kernel and never had any problem, currently using beta CM7 6.5.1 with franco kernel 13.7.2
Click to expand...
Click to collapse
Thanks for the quick reply.
Few more questions.
1.Is it better or what?
2.Do I need to make partitions before installing the Kernel?
3.Do I need to wipe anything before installing the Kernel?
Greetings. As for me i think that mik's CM7 already has it's own Kernel optimized for CM7 so there is no need to flash another kernel like franco's which is i think most optimized for franco's void.devoid ROM. Also i did some benchmarking tests on AtuNtu. So on clean CM7 6.5.1 with native kernel , with CPU 600/245 i had 1326 result, after that i flashed franco's Kernel 13.7 , CPU 600/245 and i had 1136 result on benchmark. As for battery i dont know hadnt time to test both. But i really think that the best combination is just CM7 + libsqlite.so patch + franco's tweaks and none modifications for kernels.
Kheepur said:
Thanks for the quick reply.
Few more questions.
1.Is it better or what?
2.Do I need to make partitions before installing the Kernel?
3.Do I need to wipe anything before installing the Kernel?
Click to expand...
Click to collapse
i think the best way is to do it a clean install and use clockwork latest
wipe sd card,create partition 512 mb (automatically creates ext4)
transfer rom file and franco kernel using usb mount
wipe data,cache,system, and then select mik rom and install
reboot and complete the setup for rom,boot into recovery again and flash franco kernel do wipe ur cache
reboot
done!
asserp said:
...But i really think that the best combination is just CM7 + libsqlite.so patch + franco's tweaks and none modifications for kernels.
Click to expand...
Click to collapse
If so, you mind giving the URLs to Libsqulite patch and franco's tweaks. thanks.
Sure, you can get tweaks from here: http://forum.xda-developers.com/showthread.php?t=999064
and libsqllite from: http://forum.xda-developers.com/showthread.php?t=1000899
scroll down ull see Patched libsqlite.so for 2.3 by:mik_os
Kheepur said:
Thanks for the quick reply.
1.Is it better or what?
Click to expand...
Click to collapse
Only if you benchmark your phone, for common use I do not feel any noticeable difference. I only flash franco's kernel in mik's CM7 out of curiousity not of necessity.
2.Do I need to make partitions before installing the Kernel?
Click to expand...
Click to collapse
No.
3.Do I need to wipe anything before installing the Kernel?
Click to expand...
Click to collapse
No, just flash over. It will overwrite the old kernel.
As a short explanation:
no kernel have so sayed "special code" for froyo or gingerbread. We (the developers) have currently the 2.6.32 as base kernel because of missing drivers for a newer kernel version like 2.6.35.
the only difference between all .32er kernels are the patches - one kernel have more patches, another kernel have better patches, another have nothing of all - it works only as is.
thanks for explanation.
Thanks to all who responded.
Ok. New scenario. new problem.
I got mik_os v.6.3 + p500 tweak + libsqlite.os + DT apps2sd + CWM
The problem is I can't upgrade to mik_os v.6.5.
I already got the rom. I tried wiping everything using CWM, even the system. After installing and reboot, I got stuck in the first LG logo. Am I missing anything??
What is the correct way to upgrade and exact steps to take??
Thanks in. advance
Sent from my LG-P500 using XDA App
i think you need to format your sd card because of app2sd and leave it without partition , and try to flash the rom. If successful then make partitions again and flash app2sd.
hey can i flash franco Kernel 2.6.35.13 in stable 6.5.5 cm7
http://forum.xda-developers.com/showthread.php?t=1148196
abhi29 said:
hey can i flash franco Kernel 2.6.35.13 in stable 6.5.5 cm7
http://forum.xda-developers.com/showthread.php?t=1148196
Click to expand...
Click to collapse
nope. only 6.6 is configured to use 2.6.35 kernels. if you flash it, you will run into problems (for example, when i flashed it, camera showed only a white screen and accelerometer didnt work)
hmmmmmm.....Right info....
Hi there
need some help! I can't get wifi or usb thetering working!
already tried franco (ginger testing) and paolo's Kernel (v5) ...
don't know if it's a rom issue ... i had that problem on OpenOptimus (Ginger) and now with AGA ...
if is the rom stuff, there's not much to do as i got new baseband and i use data a lot...
really i miss Mik's CM7 XD
smariob said:
Hi there
need some help! I can't get wifi or usb thetering working!
already tried franco (ginger testing) and paolo's Kernel (v5) ...
don't know if it's a rom issue ... i had that problem on OpenOptimus (Ginger) and now with AGA ...
if is the rom stuff, there's not much to do as i got new baseband and i use data a lot...
really i miss Mik's CM7 XD
Click to expand...
Click to collapse
Tethering was not a issue for me on paolo's v5 kernel and open optimus rom.May be u should wipe cache and dalvik cache and try re-flashing poalo's kernel.
Wiped all flashed OO 2.202.1 ... tried with embedded Kernel (franco) --> error
wiped cache, batt stats and flashed Paolo's Kernel --> error
I was thinking ... maybe an error ressult of upgrading baseband?
Is Turbo booster and Lagfree V2 compatible? I've read on the lagfree thread that it is but after I checked out the turbo booster thread it says not to install it with any other ram scripts.
So... is it compatible or not? Also, upon installing, are there any specific permissions needed to be set to either script? Or can they just be installed and left alone?
i think they are
but if they both have same thing modded but with different results then phone will use from 2nd script flashed
my opinion
turboboost and slaidmodv3 are compatible.... turboboost and lagfree... I don't know. If I was to use a combination I would go with the first one, othewise only turboboost alone!
I m running on cm7.2 and installed both TB v8.5 and lagfree v2.. I hav it in my custom ROM also.. No problem
Same with me...
Sent from my GT-S5830 using xda premium
Alright, thanks a lot guys! Flashing Turbo boost in a bit
slaid480 says you have to delete a script from init.d, s78 touchscreen or something like that. Then flash.
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and Tim Graham(tomgus) ,champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Ported Newer Kgsl Drivers by me
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7000] Drived From Thjap's Sources:
[P7000] Swap Support
[P7000] Vr Sched
[P7000] Sio Sched
[P7000] Deadline
ect...
[P7000] bzip2 Support
[P7000] Tun Support
[P7000] Ext3 , Ext4 , NTFS File system Support
[P7000] Updated Yaffs
[P7000] Lzo , Bzip , Gzip Decompression
[P7000] OC_UV
[P7000] Optimized Cpu Freq Table
[P7000] Unlocked many Cpu Freq-Voltages
[P7000] 128-1228!!!
[P7000] Memory Optimization
[P7000] Battery Tweaks
[P7000] Speed Tweaks
Many More...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download Links Can be Found Here
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
THX Very much hero !! but where is 32 kernel ???
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
Exellent idea but cannot download, error links!!! Please adjust links!
tori_mc said:
Exellent idea but cannot download, error links!!! Please adjust links!
Click to expand...
Click to collapse
Solved!
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
silveraero said:
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
Click to expand...
Click to collapse
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Amin` said:
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Click to expand...
Click to collapse
Just asking if you test these things mate. There is no VDD level in CPU setting in CyanogenMod Setting menu, also adb mask controller told me that vdd file dors not exist.
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
InternationalPlayer71 said:
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
azeez77 said:
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
Click to expand...
Click to collapse
mm's cm is based on stock rom...you should try stock kernel when it's released...
silveraero said:
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Many governors are missing (Brazilian wax,interactive,smoothass,savagedZen and some others)...I think that amin included only Th's governors!! I will test the kernel again today..just to see if I can confirm problems reported!!
Sent from my X10i using xda premium
New Release is on the way...
but I have to test some stuff...
i`m ready to test things if u want\
Hi
I've tested the SDE version and i it WLOD after overclocking to 1228...
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Gingerbread?
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Would any of your kernels work on 2.3 non-cm7/cm9 roms?
Feedback
Amin,
not work on [ROM]"X10S" |v9 Final released FTF File| 21/07/2012
blank screen after boot logo.
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Links are not working again!
tori_mc said:
Links are not working again!
Click to expand...
Click to collapse
Confirmed
Sent from my X10i using xda premium
Hello guys,
I'm relatively new at this. I am going to flash the new build of SlimBean tonight and I noticed that on the changelog it says "Removed all init.d scripts" . I also use the Yank555 kernel.
Does this mean i should now allow Yank kernel to load the init.d script for me or should I just keep it as it was?
Thanks a bunch.
schott0102 said:
Hello guys,
I'm relatively new at this. I am going to flash the new build of SlimBean tonight and I noticed that on the changelog it says "Removed all init.d scripts" . I also use the Yank555 kernel.
Does this mean i should now allow Yank kernel to load the init.d script for me or should I just keep it as it was?
Thanks a bunch.
Click to expand...
Click to collapse
Nothing ?