NooB questions - G Tablet Q&A, Help & Troubleshooting

Hi,
as i m quite new to android i would ask your experience for some issue i cant understand.
i received my Zpad T2 with TNT lite V4.4 installed (1.1 ROMs isn t it?) and CKM belkin 0.8
stuck at the boot logo when tryin to install these roms: (1.2 ROMS??)
VeganTab Gingerbread V7.00 RC1
Big idea 1222
bitrix beta 06.43f gingerbread
ROMS that can be installed are :
TNT lite V4.4
downgrade 4349 (tap 'n tap)
all the kernels a tried were ok :
Clemsys froyo v5
kernel 2.632.39 1.4Ghz
anyone can explain me? (i followed the install tuto with CWM)
best regards,
Alain

Have you done an NVflash, and partitioned your tab?

ave01794 said:
Hi,
as i m quite new to android i would ask your experience for some issue i cant understand.
i received my Zpad T2 with TNT lite V4.4 installed (1.1 ROMs isn t it?) and CKM belkin 0.8
stuck at the boot logo when tryin to install these roms: (1.2 ROMS??)
VeganTab Gingerbread V7.00 RC1
Big idea 1222
bitrix beta 06.43f gingerbread
ROMS that can be installed are :
TNT lite V4.4
downgrade 4349 (tap 'n tap)
all the kernels a tried were ok :
Clemsys froyo v5
kernel 2.632.39 1.4Ghz
anyone can explain me? (i followed the install tuto with CWM)
best regards,
Alain
Click to expand...
Click to collapse
Gingerbread roms need a certain partition order to work. They are not 1.2 roms. 1.2 is a locked bootloader not a rom. You have a zpad and its close to a gtab but several people have bricked their tabs nvflashing gtab stuff on a zpad so beware. I would look for a zpad forum instead of a gtab forum

thx for your reply .
i didn t use NVFlash,only install rom via CWM 8.
gonna try tonight NVFlash
a talked about 1.1 and 1.2 Roms as i saw that come with NVFlash 2 Stock roms that are libelled as 1.1 and 1.2 in this thread:
http://forum.xda-developers.com/showthread.php?t=861950
best regards,
Alain

The point was that some gtabs can not run gingerbread roms without nvflashing their partition structure to the correct format. I do know that you will brick your zpad if you use gtab nvflash

Related

[Q] 2.3.3 ROMs?

Hello.
I have a very old Hero and got interested in updating it.
I see that Gingerbread 2.3.3 is the latest version, however I don't find any ROM that has it, I only find TastyGinger 1.x which has 2.3.2, why not 2.3.3? And it turns out that the new TastyGinger release (2.0) is marked as "2.3" instead of "2.3.2", does it have an older Android or what?
I've seen also that a lot of people say that Flash doesn't work on Hero. However it's working in mine (Android 1.5), is this because it's Flash Lite? How can I know that? Will the new Gingerbread ROMs include this version of Flash?
Thanks very much.
Hi there
Flash only works with sense roms (Sense is graphic UI that You have probably on Your 1.5 hero). It's flash lite, not full version.
Regarding gingerbread roms - Tasty Ginger haven't received an update for a while.
Gingerbread roms won't include flash, unless some genius dev (with help of few Igors and a trusty thunderstorm) creates a sense gingerbread ROM...but don't hold Your breath, it's almost impossible
cheers!
brat.haneq
PS. if You need working flash - try some of the custom 2.1 roms. VillainROM12, RCMix to name the few. I remember that there is 2.2 ROM with sense, but camera is not working on that one.
I can recommend elelinux 7.0 roms, and Cyanogen 7 rom.
Both u can find on this site ( under 'development' for hero)
elelinux rom works very well
Root that Hero and put Cronos Ginger on it. latset build is a 2.3.3
cronosproject(.org) /forum/viewforum.php?f=58
i was flashed on my hero cronos ginger in my hero and i was seen some of bugs...
the call and home buttoms doesnt work... and the net navigator is too slow for me.
in addition doesnt have aScreen of blockade, but it can not to be a problem..
certainly... anyone have the flykernel 12a working on Android OS 2.3???
SERGI.3210 said:
i was flashed on my hero cronos ginger in my hero and i was seen some of bugs...
the call and home buttoms doesnt work... and the net navigator is too slow for me.
in addition doesnt have aScreen of blockade, but it can not to be a problem..
certainly... anyone have the flykernel 12a working on Android OS 2.3???
Click to expand...
Click to collapse
My girlfriend uses my Hero with Elenux 7 and the flykernel. It seems to be stable.
Elelinux 7.0.0 rc2 is rlly stable also is cm7 nightly 18 and if you are looking on a rom with flash tht is updated u can try VillianRom 13 or Tegro 2.5rc3 which are both sense one rosie and other expresso consecutively
the flykernel 12a that i unloaded of XDA no works in any of gingerbread roms, there´s anyone person that have the same problem???
my RADIO IS 63.18.55.06SU_6.35.17.03 THANKS!!!!!
Elelinux 7.0.0-RC2-Hero-v1.5... Works perfect.
elelinux gingerbread rom is great...but I recommend a 2.3.2 rom instead...
there is a memory leakage bug that makes my phone unstable in 2.3.3 roms
elelinux v1.6 just came out yesterday, which presumably fixes the leak. I just installed it a few minutes ago, going to test it now
mari21 said:
Elelinux 7.0.0-RC2-Hero-v1.5... Works perfect.
Click to expand...
Click to collapse
i was flashed elelinux 7.0.0 RC1 and RC2 BUT THE flykernel 12a doesnt works in my hero. i think that its a interface trouble only in my device.
any person with the same problem? i´m going to lookintg for another kernel and later go to post it here?
desire mee good luck!!!!
ei! i´m with RAKERN 113 with gingerbread (elelinux 7 rc2) ane works fine... a little bit of battery drain but.... it´s a little sacrifice for a good performance.
elinux 7.0 is smooth. it does not have any problem on my hero starting from v0.7 to v1.6
Sent from my Hero using XDA App

[Q] Olivetti OLIPAD 100 > Gtablet

hi folks
I bought an Olipad knowing that is a g-tab
I flashed the g-tab rom and the clockworkmod
so now I can test all g-tab roms like cyano7 - vegan 5.1 and vegan-GE 7
but I always loose 3g connectivity and 1gb ram that are really important for me!
I tried clemsyn and pershoot kernels (with all wipes) but nothing happens.
could you please help me?
my favourite rom is vegan-tab GE 7 so my effort are on it
thanks in advance!
an olipad is not a gtab. Several people have bricked their olipads using gtab stuff
Not development. Moved to Q&A.

Kernel and such?

Hello everyone!
I have a simple question that I would like to have answered. I'm adept at running custom ROMS on my GTAB, but I've never really messed with kernel stuff before.
There isn't exactly a 'topic' that deals with this, and pershoots website doesn't have that much detail either.
So I would like to know what kernel would be the best for me to run.
I've got VEGAn-Tab GingerEdition running and I just installed pershoots 2.6.32.39-cyanogenmod and it should be the ginger edition
Is this the right kernel or should I be running another?
Thanks
There are basically two kernels that are being actively supported on XDA, pershoot's and clemsyn's (clemsyn has several kernels out, but they're all just slight variations on the same kernel). If you want to overclock above 1.4GHz and/or adjust the voltage settings, then you should try clemsyn's. If not, then stick with pershoot's. It's what I use. It's what most of the devs on here include with their ROMs. For me, it seems to run better with less work. But try them both out for yourself and see what you like better. That's the only way you can really know if you're running the "right" kernel.
Also, pershoot just updated his kernel to 3.6.32.40, if you want the latest version.
Froyo use clemsyn. Gb use pershoot. Jmho...
Hey Thanks! This stuff gets quite confusing.
Another question here. I have installed Roms but how do we install a Kernel? Do we install prior to the Rom?
Thanks in advance
I've tested out every version.
1- froyo -->clemsy
2- ginger --> pershoot
3- flash kernel as you would with any other zip file. Do not use calk wipe all zip.

rooting and installing honeycomb 3.2 on viewsonic viewpad10s posssible?

hi all,
I just recently bought the viewsonic viewpad 10s that comes with a stock froyo 2.2. I am quite new to this but I was hoping if anyone could give me a guide on how to root and install honeycomb 3.2. the tablet itself comes with tegra 2 512 ram/rom. plsplss, I've been searching around for hours and can't get a decent answer.
thx in advanced
The newest honeycomb available is 3.0.1
Sent from my Flashback HC-TAB using XDA Forum App
barqers said:
The newest honeycomb available is 3.0.1
Sent from my Flashback HC-TAB using XDA Forum App
Click to expand...
Click to collapse
THx,
I already found out how to root and install honeycomb 3.0.1..
apparently to those who seek the same answer i use z4root to root the tablet.. then i install ROM MANAGER and choose advent vega
install clockworkmod from there and boot to recovery.
once into recovery, i installed the vegacomb now i have honeycomb
not sure if i'm on the right track there.. but it works for me
Ey, i have same tablet. Im trying to do same that you but i just restart with vegacomb beta 7, updated with beta 8 and it restarts ever. What versions did you use?
Do you know how could i kill this restart and restart and restart...
Regards.
I answer myself. I just done with Vegatools 4.0 and VegaModdedStock 1.10 v2 ^_^
At now i have an issue with screen touch... it doesn't recognize fine at all gestures and touches... :/
Wait you can run Vegan 3.2 on the Gtab?!
How?!
viewsonic viewpad with Honeycomb
I just installed Honeycomb (Android 3.2) on my viewsonic and it worked great.
go to the "code google android-x86 download list" site.
It is the first on on the List. This is a iso file so you need to convert it to run on a usb drive.
I also want to thank the tegav people.
This workd great!!!!!
jsmoot said:
I just installed Honeycomb (Android 3.2) on my viewsonic and it worked great.
go to the "code google android-x86 download list" site.
It is the first on on the List. This is a iso file so you need to convert it to run on a usb drive.
I also want to thank the tegav people.
This workd great!!!!!
Click to expand...
Click to collapse
Hi Jsmoot,
Did you install on Gtablet or Viewpad?
Alil confused as this forum is for Gtablet and the topic is for Viewpad
Thanks,
Arpan
Viewpad 10s Honeycomb 3G working?
I installed the Viewcomb 3.2 but the 3G wireless does not work. Could anyone help me please?
Where to find the 3.2 android for Viewpad.. thanks in advance

[Q] HannsTitan v0.3 on g tab is possible?

1.2 Bl HannsTitan v0.3
Hannspad mod, I assume? As is, it might boot up but the tactile pad might be messed up (I recall these issues when trying to load up a stock ROM for the Hannspad. And if you're on a 1.1-based GTAB ROM/mod, you'll have the usual risks of soft-bricking.
I think this mod is a mix of things like Brilliant Corners, Mountain Laurel, a Zeam UI and probably some other goodies. Is there something in there that you're looking to get on a GTAB Froyo mod? Just curious.
working rom on 1.2 bootloader
Working on my g tab
If you use a kernel that works properly on the gtab it should boot up without any problems - in theory

Categories

Resources