Since I've changed my stock rom I have problem with my sensors. When I launch various games witch use them (for e.g. teeter or some flying game) It always pull on the left when the screen is stable. There is no calibration tool in my rom (2.2.1 froyo_Achotjan_V01.4 27/04/2011) so I dont know what to do with this.
Plz help me, its very annoying in gaming.
sry for my bad english
cheers!
did you tryed reflashing the rom?
Yes, I did but it didn't solve the problem. I tried out also other ROMs (Stock SE and Wolfbreak's) but the problem doesn't dissapear. Is there any way to calibrate the sensor (not in ROM)?
Related
i'v got some problem with my compass it seems. when i use google map or a compas software i don't have a fix on a a point. It stay mostely on east. I try different calibrating tool without any succes? Do you have a clue?
SG2 on Samsung rom (XEF) with cmw last kernel.
Thanks for clues =)
Hi,
I tried new rom and the problem above began.
After calling/answering the other side can't hear me till I press several times on the speaker button - playing with speaker/mic 2-3 times...
tried new roms with swipe and nothing... same problem on stock rom.
On samsun galaxy s, rom 2.3.5, seamaphore kernel.
May be a hardware since all roms showing u d prob , try different apps - to record from microphone and see
the problem is not over the recording app - i tried several ones.
I think it's hardware issue - but i hope not because my warranty expired...
(it's because I changed from 2.2.1 to 2.3.5 - but other people who installed the same rom don't have the same problem...)
someone please help - very disturbing issue...
bring it to service center.....
sent from Nokia 3310
What device are you on and what ROM?
I used to have this problem quite prominently with a CM7-derived ROM on my HTC Desire-Z/G2 and fixed the issue, as many others have, by flashing a newer radio firmware.
Dive into your device's forum here and see if you have the option of flashing a radio.
problem solved after replacing again the rom.
Thanks everyone
hey,recently i`ve some problem with my touch screen,it sometimes doesn`t respone till i switch screen off then on,specially in Ics roms ,in gb it happends also but not all day long|! anyone have had same issue ? is there any solution to fix it ?
moritd said:
hey,recently i`ve some problem with my touch screen,it sometimes doesn`t respone till i switch screen off then on,specially in Ics roms ,in gb it happends also but not all day long|! anyone have had same issue ? is there any solution to fix it ?
Click to expand...
Click to collapse
Never had such a problem. I think it may be hardware problem
btw i saw in fera`s post he had mentioned same problem for his ics rom but i have this problem even in stock rom,but its much less than any other rom
hope its a software problem can be fixed by something!!
\
btw i saw in fera`s post he had mentioned same problem for his ics rom but i have this problem even in stock rom,but its much less than any other rom
hope its a software problem can be fixed by something!!
\
hello
i'm using samsung galaxy i5510 , and my problem is i'm having a dim dark invisble screen on cwm recovery 5.0.2.6 and some 2.3.6 official roms , and in all modded roms 7 and 10 that i found here ,even with this problem i succeed installing some mod roms using cwm recovery that is barely visible but the same problem the rom installed is dark and invisible but installed ,
here a photo is what the screen looks like it's from another guy on youtube having same problem with i5510
i dont want to come back to 2.2 or 2.3.6 beacause i can do it but i want a solution to install modded roms and cwm recovery without the screen problem , thanks to developper for help
up any help ????
ryu11 said:
up any help ????
Click to expand...
Click to collapse
If you are referring to a problem like this video:
http://www.youtube.com/watch?v=Kwll8ZfgaD0
Then i had the same issue, the only fix is to either never let the screen turn off (which consumes the battery) or run one of the two roms that dont have that issue, those would be
- Stock Gingerbread 2.3.6 latest ones (TPH or PAN)
- Arkas 1.2.3. (based on Gingerbread)
Every other single rom i tried has the same issue (CM7-10,MiUi,...).
Best of luck
Muaadib said:
If you are referring to a problem like this video:
Then i had the same issue, the only fix is to either never let the screen turn off (which consumes the battery) or run one of the two roms that dont have that issue, those would be
- Stock Gingerbread 2.3.6 latest ones (TPH or PAN)
- Arkas 1.2.3. (based on Gingerbread)
Every other single rom i tried has the same issue (CM7-10,MiUi,...).
Best of luck
Click to expand...
Click to collapse
yes this the problem that i have ,the one on the video
i'm now on arkas 1.2.3 based on gingerbread but i want to install cm 7 or cm 10 .. , and i see that many other users of i5510 are on cm 10 without having the invisible display problem
So please can someone help us to define why cm 7 10 work without problems on some i5510 ans don't on other i5510 ,it will be great
up any solutions ????
hello every one
proximity sensor of my s3 works continiously on secret menu it shows PROXIMITY:1 ADC:0(0.0.0)
i did every think
flash other stock roms upgrade and downgrade
cleane sensor
recalibrate with many methodes mentioned it stops for few minutes but retunes to work
is it a hard or soft problem
what is the solution a ccording to you please help
any solution ???,,
i am still waiting for your help
Rom or kernel issue.
Stick with the roms that work for you.
Darke5tShad0w said:
Rom or kernel issue.
Stick with the roms that work for you.
Click to expand...
Click to collapse
but because of somme bugs on somme roms i hated my s3
stock roms always are full working
i installed my stock roms on other I9300 phones it didn't cause any problem
i think that the problem is similar to 'not registred on network' issue
:good: thank you for your responce i thinked that no one will anwer me
thank you again
problem remains
i have edited the post because i observed that even with custom rom it works some hours and the problem returns
Hello everybody
I think that the problem is sloved but i am in test period
I cleaned hardly the sensor till i scared that it is broken definitivelly now it is working
And i test it
I will update if any news .thanks