Related
"Originally Posted by msierra519
i get an error too..i didnt catch the message tho..but it said aborted"
"You guys can unzip the file and push it to the system/etc folder until I have time to look at the zip"
I've had my g-Tab all of a week. I got it through Circuit City. The "application crashes" I learned are called "Force Close." Through the forum I found the solutions. I'd learned I needed the updated ROM and wanted Honeycomb. So this ROM seemed the best. I like the ROM as I've used it most of the day. I agree with the comment about soft keys because in the dark it's hard to see the keys on the bezel. The bugs I encounter are frustrating but, I've found solutions here in the forum. I'm new to Android on so many levels. This is my first Android device. So now I'm stuck.
All I wanted to do was transfer the files I have on my HTC Touchpro to my Tab. (For the 3rd Time.)(I've been through Stock ROM's and Mods several times over.) In reading I know I can't set an Adhoc WiFi tether. I also know I need the right App to transfer a file from the PC to the Tab via bluetooth or something.
So now I tried the USB file transfer. Of course it went into Debug mode. I tried some of the solutions for getting transfer mode operating but, that wasn't successful. I figured the SDCardFix solves this problem. So Tjohnsonjr says to push the file into the system/etc. folder. How would this be done?
You mean copy onto an SDcard Ext from the PC and then mount onto the gTab?
For some reason I can't even get my card to be read by the PC (I formatted it using the G-Tab command. Now when I put in my PC the explore window hangs.)
Use a bluetooth transfer? All I get is my Tab trying to use my PC as a headset. I can push a file from the Tab to the PC but, I' haven't figured the reverse.
BTW I thought I might have "bricked" the tab twice. I used CWMod to wipe cache, data, system and set the new partition. Since all of the files were on the internal SDcard the partition wiped the update.zip and command files. The reboot eventually started functioning and it pulled up "something...dirty....3388"
So obviously somewhere in the system there is still an OM android system ROM. (I think I'd like to hang onto that.)
BTW: the error reads:
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/update.zip
(Status 0)
Installation aborted.
Well I hope tjohnsonjr gets this. He's put a lot of work into this ROM. But since the xda-developers won't let me post into the Developer's forum he probably won't. (Too much of a noob).
PS I know some have critiqued the gTab because of it's size. Well for a man who can't see too well that's great. The biggest problem I have with my HTC Touchpro right now is the screen is too small to read the fine print without reading glasses. If I ever figure out how to get the wifi tether working between these two devices. I'd have the perfect solution to several of my problems.
UPdate.zip=SDcardFix.zip
I changed the file name to see if that would make a difference. I was desperate.
try going back to stock rom and then installing. I had a similar problem, and I used nvFlash to go back to stock, then reinstall cwm and repartitioned, cleared data/cache etc.
Installed after doing all that and it worked like a charm.
[Q] [ROM-AOSP]G-Harmony Gingerbread 2.3.3 with Honeycomb elements(UPDATED 4/17)
TJ posted an update to his ROM. The fix to the USB works by renaming the EMMC to the external SDcard per the posts seen on this website. So if you backed up apps and data to the ext SDcard it is now listed under the emmc directory. The SDcard is the internal memory. Not sure how that's going to work when pushing apps and data to the external card. (See forum posts discussing this workaround for the situation for all ROM's.) The USB connection now works for transferring files onto the GTab. Use a file manager for pushing from internal memory to the external SDCard.
The Adhoc Wifi connection seems to work. Meaning I got my cellphone and gTab to connect to one another however, I was unable to get the gTab to connect to the internet via the cellphone. (I'm using an HTC Touchpro on Sprint. I've never gotten the wifi hotspot to function properly but, I'm experimenting with WMWIFIRouter.)
Thanks to TJ for all of the hardwork on this ROM.
I have a GTab that was running Calkulin + Clemsyn Combo Overclock at 1.5 ghz V8 on the 1.2 branch fine for a couple months now, then something happened today. Woke up to find there was no sound coming from it (I'd left an Anti-mosquito app running all night), so I tried to play a couple music files. Seemed to get frozen instead of playing, so I restarted. That's when it went into a boot loop from 3 birds to the first splash screen of the loaded ROM.
Attempted to do a backup via CWM, and it failed on /data. Tried a data wipe/reset, then reflashing the ROM and finally NVFlash. Still goes into a bootloop. Repartitioning and mounting doesn't do anything; ADB doesn't see the device at all in CWM or APX; /data cannot be mounted and /sdcard mounts only when a card is inserted (doesn't see the internal space) but still doesn't mount USB storage and says: "E:Unable to write to ums lunfile (No such file or directory)"; drive shows in Win7, but is inaccessible;
As mentioned, APX mode and NVFlash along with CWM works fine. And I can mount /cache and /system fine. I've gotten to Code Double Red here and now I'm draining the battery for the next step (really don't want to pull any screws). Also tried the fix here, but it seems that's just for CM7, which I'll probably try flashing some time.
I'm going to return to the 1.1 branch and try a couple ROMs there, but I have a really slow connection and it's taking a while to get nvflash 1.1.
Did a quick search of the forum and didn't find anything quite similar. Obvious question is, has anyone ever experienced this before? What are some other steps I can take to fix this? Is there a way to backup the internal SD before I probably have to wipe it?
Connect the USB cable to the tablet, then boot it into CWM, and run this command on your PC:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
Post that dmesg.txt file here. We'll see what's wrong.
Connected the charger long enough to run the command, but all I get is "error: device not found". As I'd said, ADB doesn't detect the tablet, even though Windows knows when it's connected and disconnected. Is there anything that I can flash to get me a terminal? That's the only way I can think of to get that command run and hopefully direct the output to my SD. Thanks.
I now have a completely dead battery. Wondering what to do next since it's supposed to have been hard reset now. Not seeing anything different after booting; same boot loop even though I just flashed a ROM again.
rajeevvp said:
Connect the USB cable to the tablet, then boot it into CWM, and run this command on your PC:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
Post that dmesg.txt file here. We'll see what's wrong.
Click to expand...
Click to collapse
I had seen this thread before where you were helping someone last year. Wish I'd read further to see that he eventually got the same problem I now have. I'm currently working my way through everything. First I need to get ADB running though, so I'm working on that now. Think I may be needing that partition swap trick, but we'll see...
Having issues getting the right USB drivers installed for ADB on Windows 7 64 bit. Using instructions here. But each time I uninstall the device, as soon as I plug in the tablet, it installs the default drivers. Using both Device manager and USBDeview. Updating and other options are also disabled when there is nothing installed. Considering to do a direct registry hack of the device info if I can, and hopefully not break anything important.
Try using Linux.
I finally got ADB working on my system and did some experimenting. Seems there's definitely something wrong with my internal SD according to the dmesg output. Luckily I have a SD which I used in my SG3, and it is already properly partitioned, so I'll try using that. Tried making a fstab file in /etc (mtdblock3) but I got "Magic Value Mismatch" error, so I NVFlashed to return it to how it was. I'm currently researching how to create update files, because it seems that's the only way I can get the SDs swapped. Any guidance is still welcomed. Thanks alot.
Skele Drew said:
Seems there's definitely something wrong with my internal SD according to the dmesg output.
Click to expand...
Click to collapse
Yeah. There are clear error messages relating to the internal SD card. You can either return the tablet and get a replacement, or, use my SD card device swapping technique to use the external SD in place of the non-working internal one.
Tried making a fstab file in /etc (mtdblock3) but I got "Magic Value Mismatch" error, so I NVFlashed to return it to how it was. I'm currently researching how to create update files, because it seems that's the only way I can get the SDs swapped.
Click to expand...
Click to collapse
If you use my files, you don't need to modify anything manually. What're you trying to change, BTW?
I can definitely use some help there. Where are the files? I tried modifying the custom ROM I use by adding a custom fstab and vold.fstab to /etc, an init script to init.d and replacing the /data mounting command with:
Code:
ui_print("Copying Data Files");
run_program("/sbin/mount", "-t", "ext3", "/dev/block/mmcblk2p2", "/data");
ui_print("Mount information:");
ui_print(run_program("/sbin/mount"));
Not sure what you're attempting to do here...
If you just want to use an external SD card in place of your non-working internal one, then all you have to do is a) flash either one of the CWM zip files and then b) flash the SD card swapping zip file right after you install the ROM of your choice. And, if you tell me which ROM you plan to install, I can look inside it and tell you if my scripts will work with that ROM.
If you can read shell/awk scripts, you can look inside the zip files to see what they do and how they do it.
rajeevvp said:
Not sure what you're attempting to do here...
If you just want to use an external SD card in place of your non-working internal one, then all you have to do is a) flash either one of the CWM zip files and then b) flash the SD card swapping zip file right after you install the ROM of your choice. And, if you tell me which ROM you plan to install, I can look inside it and tell you if my scripts will work with that ROM.
If you can read shell/awk scripts, you can look inside the zip files to see what they do and how they do it.
Click to expand...
Click to collapse
I was trying to make a swap script myself, but it's not working. /system dir gets corrupted. I'm using Clemsyn_Caulkinver8final2, a Froyo ROM.
Look at my scripts. If you have any questions, just ask.
Where are the scripts? That's what I've been asking...
EDIT: If this is what you use, then all should be ok. Let you know the result when I'm again online. Thanks alot for your help!
That's what I was talking about. I modified the device-swapping script today to fix-up an additional shell script, /system/etc/inandop.sh, on the various Clemsyn/Beasty ROMs (incl. yours), so use the newer zip file.
rajeevvp said:
That's what I was talking about. I modified the device-swapping script today to fix-up an additional shell script, /system/etc/inandop.sh, on the various Clemsyn/Beasty ROMs (incl. yours), so use the newer zip file.
Click to expand...
Click to collapse
Appears it still doesn't work. However, now instead of having a boot loop, it's just stuck at the splash screen after the 3 birds. I'm going to try combining your script and the ROM to see if I can get better results. I'm also going to try inserting some log/debug messages where I can.
Skele Drew said:
Appears it still doesn't work. However, now instead of having a boot loop, it's just stuck at the splash screen after the 3 birds. I'm going to try combining your script and the ROM to see if I can get better results. I'm also going to try inserting some log/debug messages where I can.
Click to expand...
Click to collapse
THANK YOU RAJEEV!!!!!!!
Today I got the time to work on my tablet again, since I just restarted college and it's been a bit hectic. Decided to try CM7 since when I looked into your script I saw direct management for it, so I NV'd back to 1.1 (I didn't know what branch CM7 was on, but flashing CM7 on 1.2 gave an error and aborted). The first time I tried the CM7, it got to the CM7 logo, then was there for a while until I only had a black screen. The only way I knew the tablet was still on was because ADB was still connected. Then I flashed your script and VOILA! everything started great. So now I have my tablet again for my classes .
I am planning to still run a few tests to see if I can somehow recover/fix the internal SD, so I downloaded your set of e2fsprogs. Think I'll make a flashable file for the entire package.
Again, thanks for all your assistance. It's much appreciated. I really didn't have that much time anymore to work on it myself too. I will continue to learn more as time goes on though, and I hope one day I'll become a guru like you .
Skele Drew said:
Decided to try CM7 since when I looked into your script I saw direct management for it, so I NV'd back to 1.1 (I didn't know what branch CM7 was on, but flashing CM7 on 1.2 gave an error and aborted).
Click to expand...
Click to collapse
The official CM7 is, right now, only for 1.1. However, since you can replace just the kernel and instantly make a 1.2 ROM, you'll have to look at the kernel messages to tell which bootloader version you have (Note: this is only for pershoot kernels).
The first time I tried the CM7, it got to the CM7 logo, then was there for a while until I only had a black screen. The only way I knew the tablet was still on was because ADB was still connected.
Click to expand...
Click to collapse
This is to be expected. When a ROM first runs, it writes a whole bunch of stuff into /data; but, your internal SD card is messed up, so every write would've ended up with the kernel retrying for quite a bit and then failing.
You should've flashed the ROM and immediately afterwards my script to fix-up the mount points on the ROM--ie. before the first boot.
I am planning to still run a few tests to see if I can somehow recover/fix the internal SD, so I downloaded your set of e2fsprogs. Think I'll make a flashable file for the entire package.
Click to expand...
Click to collapse
I doubt if you can "fix" your internal SD card error using any of the e2fsprogs--it looks like a card-controller error rather than a media error. You have one of the non-standard internal SD cards which has caused problems for some other users as well.
Ok. I do have a few issues I hope I can get some help on. For one, flash player doesn't work, and that's something very important. All my browsers direct me to get flashplayer. It worked pretty well in my previous ROM, so it may be an issue with CM7, but I haven't seen any similar issues on their site.
Also, the tablet is less responsive now, though I think this has to do with the /data partition being on external SD, though it's a class 6 card.
Sent from my GTablet using Tapatalk
Did you partition the external SD card correctly into 2 partitions (the first as VFAT and the second as ext3) before you installed CM7? I'm not sure what steps from my post you followed and what steps you skipped: you mentioned you were planning to modify the scripts/ROM, right?
It is also possible that my script is not doing the right thing on CM7 since it doesn't touch the vold.fstab on it. Get me the output of a mount command in CM7, and these files:
Code:
/system/etc/vold.fstab
/system/build.prop
Also make sure that you, or the ROM provider, haven't enabled the SD card switching in Settings > Cyanogenmod settings.
The SD I'm using was in a SG3 using this ROM, so I think it's correctly partitioned. I've accessed the partitions before and the correct names are associated with the contents. I only followed steps 1 & 4. The option to use removable for apps and media is disabled.
build.prop
mount.txt
vold.fstab
Well, I am new to this forum because I recently bought a Galaxy Player. This is my first Android device and I have rooted it using SOC. I have installed clockworkmod but there is no option for the Galaxy Player. I have downloaded the ICS rom for the 5.0 USA version and I am just a complete noob to custom roms. Can anyone direct me to a goods tutorial on this or just a quick rundown on how to do it, I am just a really confused 14 year old... Thanks
mrjaredbeta said:
Well, I am new to this forum because I recently bought a Galaxy Player. This is my first Android device and I have rooted it using SOC. I have installed clockworkmod but there is no option for the Galaxy Player. I have downloaded the ICS rom for the 5.0 USA version and I am just a complete noob to custom roms. Can anyone direct me to a goods tutorial on this or just a quick rundown on how to do it, I am just a really confused 14 year old... Thanks
Click to expand...
Click to collapse
just pretend you didn't do any of that and...
1. download odin3 v1.3 (windows application)
2. download the samsung usb drivers and install them, i can't remember where i got them
3. plug phone into usb, turn off while plugged in, turn back on while holding volume down (maybe it was up?)
4. go into odin and click the pda button and select...
5. this file and press "start" (i think that's what it's labeled)
6. the phone will reboot itself back to normal
7. copy this zip onto your sd.
8. turn the phone off, and turn back on while holding volume up
9. back that **** up, i dunno what the hell it's labeled
10. wipe data/cache/dalvik (dalik is under advanced)
11. choose to install zip from sd, choose the "this zip" from step 7
12. choose install from zip again -> ICS ROM you downloaded
13. reboot, try out ICS for 2 seconds
14. turn off, boot into recovery (the volume up + power **** we keep doing)
15. install from zip -> Google Apps zip
16. reboot and enjoy ICS and google apps and all the other cool stuff the internet has to offer
Thanks! Very well written, I'll try it out later tonight.
I have installed it successfully, however I don't think it detects my internal SD card. Do you know why that is?
mrjaredbeta said:
I have installed it successfully, however I don't think it detects my internal SD card. Do you know why that is?
Click to expand...
Click to collapse
idk what you mean by "it" nor do i pay attention to my internal at all since i have 32gb external
I meant the device doesn't detect it, and I do not have an external at the moment.
mrjaredbeta said:
I meant the device doesn't detect it, and I do not have an external at the moment.
Click to expand...
Click to collapse
yeah, idk i haven't even noticed so i'm not the person to ask i guess.
mrjaredbeta said:
I have installed it successfully, however I don't think it detects my internal SD card. Do you know why that is?
Click to expand...
Click to collapse
This is why you should always read the entire post when you download a ROM. That issue is mentioned several times through the thread, and it has yet to have been resolved to the best of my knowledge. But always look into what your flashing, otherwise you'll probably end up with a really shiny paperweight on your hands.
Yes, I should've looked at the whole thread but I f'd it up badly now... So, I read what you said about the "SD card problem in the thread" and I took a look and saw that you had to switch around /emmc (I think?) and /sdcard around in the vold.fstab file in the /etc directory. SO, I was stupid and extracted the whole .zip of the ROM, changed the contents in the vold.fstab file, re-zipped it up, and tried to flash it again. Unfortunately, I tried to flash but this is what CWM Recovery said:
-- Installing: /emmc/ICS/3-31.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
... It's probably because the signature verification failed (because of no signature). And I was also being so stupid as to deleting the original ROM off of my SD card... I also note that I am doing this all from an internal, I do not have an external... This is what I am going to:
Get an external microSD and microSD reader for the PC
Put the original ROM on it
Flash it from the external
I am guessing that it would work from that way, as I probably f's up the internal. Can someone clear this up? Will this method work?
Disregard my last post, I am all set back to the stock ROM with no problems. Anyways, thanks for the support, and I will always try to look at the whole thread before flashing a new ROM.
Here
Check here this forum has a lot of custom roms for the SGP player and a lot of smart people who explain it as good as M.I.T.
http://forum.xda-developers.com/forumdisplay.php?f=1423
I hope someone can help me. I have a 16gb nook tablet that I rooted using the method described here http://liliputing.com/2012/03/how-to-dual-boot-cyanogenmod-7-nook-tablet-os-with-a-microsd-card.html over a year ago and I've never had an issue until last weekend. My daughter was playing a game and the nook started acting up. The touch screen became unresponsive and the screen started to flash. I let the Nook charge overnight and when I turned it on the next day the screen became stuck at the white Nook welcome screen. After 20 minutes I tried the holding down power and N button to see if I could get it to restart, but unfortunately that may have made it worse. Now my Nook won't start at all. I've read many many threads here on how to fix it, but I am not tech savvy in the slightest. The first thing I tried was Rays method http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/ but instead of getting the green checkmark I got the red X and the "nook is shutting down" message. I tried so many things that I cannot remember them all but I do know that one of the methods I tried I got this message.
E:Can’t mount / cache/recovery/command/
E:Can’t mount / cache/recovery/log/
E:Can’t open / cache/recovery/log/
E:Can’t mount / cache/recovery/last_log/
E:Can’t open / cache/recovery/last_log
After that I tried to use the method described here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 and I did make the booktable cwm-sd and I went to lavero.burgos' thread to download the mmcblk files, but they weren't there.
Also I don't understand what adb is but I'm desperate, when I found the thread that explained it and tried to download the ADB + Fastboot + Drivers.zip that was in said thread (I'm sorry I can't remember which thread it was) the zip file didn't work.
I'm really sorry for posting yet another, "please help my nook is borked" thread but after all the reading I've done this past week the only thing I've become is very confused and frustrated. Thank you in advance to anyone who can help.
Notice on the link you posted
Ray Waldo; said:
If this procedure fails, try one of these:
Celtic has a possible solution on XDA here: http://forum.xda-developers.com/showthread.php?t=1513583
Succulent has more info on his Github page: https://github.com/succulent/acclaim_recovery_sdcard.
Click to expand...
Click to collapse
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
udownwitopp said:
Notice on the link you posted
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
Click to expand...
Click to collapse
Thank you for your reply. I will try this tonight and hopefully it will work.
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
evm22 said:
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
Click to expand...
Click to collapse
I'll try to explain the process for you. "The Red X" is a very common issue that people have with their devices. It's usually caused by digging into something that you don't fully understand. It's VERY important to understand the process of flashing custom ROMs because it could screw up your tablet, delete ROM partitions and such.
The first issue you need to attend to is "The Red X." First download the bn_142_factory_recovery.zip from the ray waldo site found here:
http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/
Unzip the zip file and you should have a repart.img. Use win32diskimager to write this to an SD card. Once it's done writing, put the SD card in your device and it should boot from SD card and flash stock B&N 1.4.2 to your nook (if you have problems booting from SD card plug in the USB to your computer).
If you still get "The Red X" during this process please use the following method:
http://forum.xda-developers.com/showthread.php?t=1513583
If you have further problems please post or PM me. Once you have the issue fixed I HIGHLY recommend using the SDC version. It's a lot easier than the Internal Version and will prevent mistakes from happening.
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
evm22 said:
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
Click to expand...
Click to collapse
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
datallboy said:
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
Click to expand...
Click to collapse
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
evm22 said:
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
Click to expand...
Click to collapse
There is a possibility you could have deleted some partitions important to the nook then. Have you tried making an sdc version of cm10 to see if it could boot at all? You could see if you still have the device information to backup, recreate the partitions and flash back to stock.
Use this to make a bootable cm10 card:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
Just write the image file to an SD card and put it in your nook. It will boot into cm10. Once there go into your file manager and turn on root access. Go to your root drive/ROM/devconf to access all your device information. Make a backup of all them. There is a picture of my devices root drive. If you do not have the various partitions you will have to recreate them. There is a method on the Nook General Thread for doing this named "Unbrick Internal Partitions On NT" or something similar. You can use that recreate the internal partitions essential for your nook.
If you deleted the ROM partition with the Nook's product information you may be out of luck. The serial number and Mac address are the most essential, and can be found on your device hardware. The SN is under the SD slot (if readable) and Mac address is located inside your device. Not sure where I've never opened my nook to look, but probably on the WiFi chip.
Slight chance you may be able to fix it with this information and the rest of the device information you can use from a different nook since it doesn't have to do with internet and registration. There may be a way to fix that, but I don't know of any.
Best of luck. If you have problems just post a reply or send me an email.
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
evm22 said:
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
Click to expand...
Click to collapse
Hello! Did you ever figure out how to resurrect your Nook? I had trouble signing in Gmail and wanted to just unbrick and have the plain Nook again. I've been struggling getting the device to boot from the sd card with the repart imaged. I'm trying to get back to the ClockworkMod recovery screen but I can't at that moment. Someone suggested that I "flash" the B&N zip to the card but I'm trying to figure out how to do that.
Would love help!
Hi all,
to make it plain and short: I messed up.
I have a GT-S5830i which I unrooted according to the Sticky Note in the forum, installed CWM Recovery and then 'installed from ZIP' a CM9_cooperve_Beta_05.zip that I found in one of the posts in the forum. The installation went on without error message but since then the phone does not make it beyond the initial screen "Samsung Galaxy Ace GT-S5830i". I can start recovery mode and Download mode. In reovery mode I can format cache, data, sdcard, sd-ext but *not* system. Error Message: "E: format_volume: make_ext4fs failed on /dev/block/st19"
I have tried already several methods according to the forum, e.g.
1) 'install from ZIP' older Cyanogenmod
2) the tool ext4_formatter.zip
3) re-flash with ODIN with several tar-ROMs, all failed. Odin finds the phone (since I start Odin as Admin now), but after I hit 'start' it tries to establish a connection to the phone and ends after a while with 'Failed'
I'm basically lost now, don't know what else to do. Any advise is appreciated (it's my mom's phone, she is getting impatient )
Thx, cheers!
Xala
Hi @xalarsk , So you can't format your /system partition , which is required for installation of your rom ,, you need to try this method from here mate . Follow my instruction from the line @post#4 :"1. Download one of the newest ,,," to the end of the post and please do not use CM9 beta , because it is unstable and will wreak havoc with your system eventually . ( either cm7 or cm11 is the place you should go for CyanogenMod experience for cooperVe device ).
If you fail at any level please give us your logcat ( error massage ) for better support for your Odin process you mentioned .
Cygwin not working
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
xalarsk said:
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
Click to expand...
Click to collapse
Cygwin was meant for windows platform to get the native Linux environment/command line you already got there . You can create a virtual instance of the windows 7 inside virtualbox or any kind of apps you are preferring such as Vmware/Parallel etc etc to get the job done .
Splitfus2 only supports windows platform as far as i know mate,,, either vitalization as i said or the pre-made zip package ( which is clearly not .exe file ,, push the download now and get yourself a descent downland manager,, tested and zip packaged delivered ) from here is the feasible approach for your problem .
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
xalarsk said:
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
Click to expand...
Click to collapse
Another fellow had similar issue with my attachment that was corrected here @ post#27
Unbricked, SD card not recognized
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
xalarsk said:
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
Click to expand...
Click to collapse
Mostly this happened because of the bug inside CM9 beta you used . Study this topic mate i troubleshooted while ago for a sample of the symptoms external SD card would show after unstable ICS usage .
Also as an alternative to the method i instructed there , you can format/Re-partition your SD card by putting it inside card reader and using app such as free MiniTool Partition Wizard "Gparted" tool for Linux users Or "iPartiton" for Mac users etc etc ,, to get the job done . You can find several tutorials inside XDA for this matter mate.
Phone works with CM7.2, can I upgrade to CM9?
Hi again,
first of all, props to @ehsanotaku, I will hit the 'Thanks' buttons.
Now, this is a bit beyond the topic, but I'd like to ask anyway for recommendations of CM9 roms. The one I picked from a post inside this forum bricked my phone and made me start this thread, I don't want to go down this road again. So I'd be glad for any recommendation of a stable ROM that will put my phone beyond Android 4.0.
Cheers again,
Xala
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
hojnikb said:
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
Click to expand...
Click to collapse
ok not going to excruciating details of symptoms and explaining all of your errors for now just please read my advice @ post2 of this topic and follow the procedures accordingly and finished it with formatter tools and cm7 instructions you will find there ., after that you can install Kitkat Smart R2 like you are coming from another CM7 build instruction . btw some problem regarding super user privileges and play store 492-498 infamous bug was reported for this fairly new development .