My PC hung while I was restoring firmware from Nandroid backup. The delete process went fine but restore did not happen. Now the Streak is bricked (Dead). It won't boot, not recognised when connected to PC, no LEDs, no recovery, no fast boot.
The command which executed in Fastboot mode was :
ECHO.
:: Erase existing boot image
ECHO * Erasing existing boot image
IF EXIST boot.img (fastboot erase boot) else (
(ECHO Backup boot.img image not found in current directory. Bad idea to continue script. No erasing has taken place. ABORT!)
(GOTO :END)
)
ECHO.
:: Erase existing system, userdata, and cache images
ECHO * Erasing existing system, userdata, and cache images
IF EXIST system.img (fastboot erase system -w ) else (
(ECHO Backup system.img image not found in current directory. Bad idea to continue script. No erasing has taken place. ABORT!)
(GOTO :END)
The second part which had the command to flash the system and boot failed due to PC being hung and phone went to reboot but did not reboot since then.
Please let me know what are my options now? Are the files deletd are from the internal SD? I I change the SD card will it boot? Should I look for JTAG to resurrect?
Please... Please..help.
I bought it from US 5 months back now I am in India.. so...No Warranty...and no proper Dell Service Center.
Your streak is dead, only way to fix is to remove the inner SD and reformat it
TheManii said:
Your streak is dead, only way to fix is to remove the inner SD and reformat it
Click to expand...
Click to collapse
I am ready to strip/dismantle it. So, If I remove the SD, will it switch On? Should I buy a new SD and Put it there or once it's ON I can put the same back and Factory Reset?
It only needs to be reformatted, there's a thread somewhere on how to restore it.
TheManii said:
It only needs to be reformatted, there's a thread somewhere on how to restore it.
Click to expand...
Click to collapse
Thank you..Thanks a lot....Just to reconfirm, I should get the Inner SD out, Format it on a PC in FAT32 mode, Place it back and swith on the phone and it should work.
If I can switch it on, that should be enough, then I should be able to manage it from QDL TOOL. Currently I am not able to switch it on and thats a problem.
You have to reformat it in a very specific way, it's made up of multiple partitions i think
TheManii said:
You have to reformat it in a very specific way, it's made up of multiple partitions i think
Click to expand...
Click to collapse
I have searched a lot but can't find a way to get the Internal SD formatted. Please help if you have a link or some guidance. It becomes more difficult if the Streak is not booting at all.
dont remove internal sd only card you can see, internal sd has important info stored bricked or not. I have pm'd you also
nirajkrm said:
My PC hung while I was restoring firmware from Nandroid backup. The delete process went fine but restore did not happen. Now the Streak is bricked (Dead). It won't boot, not recognised when connected to PC, no LEDs, no recovery, no fast boot.
The command which executed in Fastboot mode was :
ECHO.
:: Erase existing boot image
ECHO * Erasing existing boot image
IF EXIST boot.img (fastboot erase boot) else (
(ECHO Backup boot.img image not found in current directory. Bad idea to continue script. No erasing has taken place. ABORT!)
(GOTO :END)
)
ECHO.
:: Erase existing system, userdata, and cache images
ECHO * Erasing existing system, userdata, and cache images
IF EXIST system.img (fastboot erase system -w ) else (
(ECHO Backup system.img image not found in current directory. Bad idea to continue script. No erasing has taken place. ABORT!)
(GOTO :END)
The second part which had the command to flash the system and boot failed due to PC being hung and phone went to reboot but did not reboot since then.
Please let me know what are my options now? Are the files deletd are from the internal SD? I I change the SD card will it boot? Should I look for JTAG to resurrect?
Please... Please..help.
I bought it from US 5 months back now I am in India.. so...No Warranty...and no proper Dell Service Center.
Click to expand...
Click to collapse
----------------------------------------
OK..so now I got my streak back after getting it repaired using RIFF-JTAG. It's at least getting powered on now but gets stuck at Dell Logo. It does not go to Recovery (Boot with Vol+ & Vol-) and does not go to Fastboot.
So I can not flash any firmware on it. So looks like I am back to square.
Any assistance please........
Look at my post on this thread, i had the exact problem and i solved it.
http://forum.xda-developers.com/showpost.php?p=13446944&postcount=10
read the entire thread including my post, if you still have problems let me know.
link to entire thread.
http://forum.xda-developers.com/showthread.php?p=13446944#post13446944
or follow this thread
http://forum.xda-developers.com/showthread.php?t=982906
nirajkrm said:
OK..so now I got my streak back after getting it repaired using RIFF-JTAG.
Click to expand...
Click to collapse
You bought the JTAG Box to fix the streak by soldering method?
Final5k said:
You bought the JTAG Box to fix the streak by soldering method?
Click to expand...
Click to collapse
-------------------------------------------------
I got it done by a Mobile repair shop. It was hard to find one who has JTAG Box and he charged $ 60 for this. I searched on RIFF-JTAG website. They have list of resellers and customers on their website.
bricked streak
time for qdl to resolve bootloop????
passion8059 said:
time for qdl to resolve bootloop????
Click to expand...
Click to collapse
Thank You !!!!! Finaly it's fixed and it's booting up, going to Recovery, FastBoot all Normal.
On Recovery and FastBoot screen it shows a Red Line across the screen written "Default NV checked #3". Yet, the recovery and FastBoot is working fine.
Also the phone shows "No Sim Card" though there's one valid one inserted. I have done Factory Reset, restored my backup and Airplane Mode On/Off but didn't work.
These two may be related to JTAG done earlier. I will try to get to that person again to see if he can check on these. If you have any suggestions please let me know.
bricked streak
had same issue with no signal/airplane mode.
downloaded another update.zip file install steakmod recovery and flashed and success logged onto network. think as it has recovered it skipped logging network mode but as I said flash another update.zip and should resolve issue!
http://forum.xda-developers.com/showthread.php?t=840326
passion8059 said:
had same issue with no signal/airplane mode.
downloaded another update.zip file install steakmod recovery and flashed and success logged onto network. think as it has recovered it skipped logging network mode but as I said flash another update.zip and should resolve issue!
Click to expand...
Click to collapse
Thank you for your help. I have flashed Streakdroid 1.9.1 as well the Stock AT&T 2.2.2. Did not work. With Stock firmware it said Invalid SIM and with 1.9.1 it said No Sim Card.
This prompted me to think of another point. This is a AT&T locked phone unlocked using Unlock Code from AT&T. Again I think JTAG has got this locked somewhere but I am not getting the prompt to input the Unlock Code even with the stock ROM.
Is it possible to manually force somehow the system to prompt for the Unlock Code?
if you put in another sim bar at&t and states invalid sim should prompt for network unlock code again if not looks like baseband may have corrupted. could try qdl again as a last resort.?. otherwise could look for streak unlock costs approx $20/$30 and solved my unlock nightmare
Related
Phone: LG p500
Rom: CM9 (arjen nightly)
Kernel: Default
Apps2SD: [MOD] Move to sd-ext | Simple app, private-app and Dalvik cache to SD solution
2 days ago, my phone gave me like 8 force close in row, so i decided to pull out battery and reboot. Next time i rebooted it got to eternal loop. I wipe dalvik - reboot - nothing, wiped factory reset and got error while erasing things in SD (android secure, ext, etc) i tried to flash a rom and surprise! my phone got error with "Can't mount /dev/block/mmcblk0p1" tried other SD including a new one, a just format card and nothing. Read in the internet that could be an issue that sd wasn't recognized and that could be fixed in fastboot. Entered fastboot and placed these lines
fastboot oem rebootRUU
fastboot oem enableqxdm
But fastboot won't execute them, just gives me "..." after whatever line i write and i have to pull out battery enter again to try again.
I'm now down to discovering why doesn't fastboot isn't executing my commands, as for recovery, i'm unable to flash anything without my sd being recognized. I also thought of flashing stock rom through emergency mode, but don't know why i'm unable to get into that mode with the 2 button combo (Volume up + return) while connecting usb. The result is just getting into eternal loop on the android text logo
Any help that you could give me i would be really pleased,
thanks for your time and sorry for my spelling i'm not an english native speaker
Why dont search a litle bit
http://forum.xda-developers.com/showthread.php?t=1811650
Edit sorry you cant enter emergency mode try see if lgmdp detects your phone while stuck in android
Press thanks if it help you
Try this if LGMDP detect phone i give you all the files needed to flash by lgmdp
http://forum.xda-developers.com/showthread.php?p=29262689
Sent from my MOMO9 using XDA Premium HD app
thx for the help i dont know how magicaly today after days of trying i could magically get into emergency mode on a friends computer, and managed to install 2.3 stock rom. The problem is now that i still can get sd cards to be recognized, but will keep searching for an answer. I'll have to enable fastboot on my device to try again the
fastboot oem enableqxdm 0
any clue on how to get fastboot with out flashing anything? (i'm unable cause sd is unaccesible from any place)
EDIT: Just realized that i wont be able to root with out sd, any workaround?
Hello,
a few weeks ago i flashed cwm and cyanogenmod 10.2 nightly to my L9. I wanted to use Link2SD to move some apps from internal memory, so i had to repartition the sd-card. Unfortunaly the phone would not let me remove the sd-card (seems like it is stuck because the eject-mechanism is not working). So i tried to repartition the memory with Aparted from within the phone and of course i accidentally removed the phones internal partition, instead of the sd-card partition. Now the phone won't respond to almost anything i have tried. That includes:
- turning the phone on
- booting to recovery
- s/w upgrade mode
With Lelus tool i am able to get a fastboot connection, it even looks like i am able to flash another recovery image (i have the omap drivers still installed from flashing the phone the first time). But in the end the phone itself does not respond to anything. When trying to install ics x and u boot with Lelus script it fails after complaining about a missing partition.
Do you know another way to restore internal partition(s)? Is there any hope to get the phone working again?
Thank you in advance
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
tawhid111 said:
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
Click to expand...
Click to collapse
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
kidCurly said:
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
Click to expand...
Click to collapse
The s/w mode from the unofficial fastboot is not going to work. I think you really messed up your phone doing that (aparted). You might be able to run a fastboot command to repartition it but I doubt it will work. Try this command select option 1 (just fastboot)
fastboot devices
fastboot oem format
You should have a look at this information as well http://www.omappedia.com/wiki/Android_Fastboot
Sent from my LGMS769 using XDA Premium 4 mobile app
my phone just LOGO,, try update offline error 4%
then i try with fastboot:
fastboot devices
fastboot erase u-boot
fastboot erase boot
fastboot erase recovery
fastboot flash u-boot 2.img
fastboot flash boot 3.img
fastboot flash recovery 4.img
now phone is dead,, i se on device manager omap4430 fastboot usb device only connect then disconect continuesly...
please helpp,,, #cry
This should help you fix it: http://forum.xda-developers.com/showthread.php?t=2119090
It will give you fastboot access again so you can flash the correct files.
I love omap devices, they seem to be difficult to hard brick with the exception of the high security models.
Sent from my Amazon Tate using Tapatalk
I tried to install Conceptify ROM. When I was making a partition, I had mistake, instead of typing rm 29, i typed rm 3. Then I came back to recovery and power off telephone. At first time I was able to enter recovery, but then I wasnt. Flashmode and Fastboot arent working, device dont start. On my pc its named like an unknown device or somc, Does anyone can help?:crying:
Hi bro , did have solve your problem yet?? , I've got the same situation as you the same rm 3 if only I added another number , I think that block 3 has files for flashboot that is why it isn't working anymore , I tried with xperia companion but also asked about that flashboot
The only solution is to find a workaround on how to flash the firmware through fastboot , anyone has any idea??
partition 3 is s1sbl (related to bootloader), so you can't restore your device via flashtool, pc companion or emma. it's hard bricked, sorry
it can be recovered if you have any jtag box
Cubbins said:
partition 3 is s1sbl (related to bootloader), so you can't restore your device via flashtool, pc companion or emma. it's hard bricked, sorry
it can be recovered if you have any jtag box
Click to expand...
Click to collapse
thanks for clarifying , So the jtag box used for recover the lost partitions or repartitions the whole device?
do you know any the proccess to recover with jtag?
also when I tried to fix that partition with fastboot or flash bootimg or recovery it's said that my partitions table is not exist
othmane.os said:
thanks for clarifying , So the jtag box used for recover the lost partitions or repartitions the whole device?
do you know any the proccess to recover with jtag?
also when I tried to fix that partition with fastboot or flash bootimg or recovery it's said that my partitions table is not exist
Click to expand...
Click to collapse
please join to our telegram chat then we can discuss about your problem
Any joy in getting your boot partition back. I may have gone the same route with my M4. No flashmode, no LED when connecting to USB, etc.
Links to possible JTAG solutions for this phone?
mannemerak said:
Any joy in getting your boot partition back. I may have gone the same route with my M4. No flashmode, no LED when connecting to USB, etc.
Links to possible JTAG solutions for this phone?
Click to expand...
Click to collapse
which partition have you mistakenly delete? did fastboot still work for you? if so you can flash recovery and restore your OS and somehow you could fix flashmode with usb debugging on
but if you're unlucky like me with locking the bootloader mistakenly then
there's setool box and JTAG box but the question is which one is easier for restoring boot partitions
also I saw some way of restore partitions but that was with emmc replacement
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Thanks Flippy for sharing the steps with us.
can i downgrade from Nougat to Marshmallow？
microbai said:
can i downgrade from Nougat to Marshmallow？
Click to expand...
Click to collapse
sorry for the delay, yes you can, just follow the steps.
ayad said:
hello all
i spent last few hours looking for solution to how to flash Stock Rom to my YB1-X90F and i found steps here and there and finally i got it. so i gathered all the steps in one thread to help whoever want to flush back to stock or downgrade from newer version for any reason.
This will erase all user data.
1. do it on your own risk, I'm not responsible for any damage to your devise.
2. Unlco your bootloader here is the steps by earthCallingAngela ----->>> Here
3. if you having issue to connect your drive to your computer while on bootloader you can install Intel driver, its worked for me, ----> Here
4. now install Intel Phone Flash Tool, i think it will install drivers as well, download it from here
5. Download Yoga book YB1-X90F Stock Rom Uploaded by Flippy498 from here
6. open Intel Phone Flash Tool and boot your phone on bootloader by Vol Up + Power, you should see the tool detect your Tablet.
7. on intel tool click on brows and located the Rom, wait for the tool to unzip it,
8. do not change anything just click on Flush and wait for it, on the middle of the process the tablet will ask you if its ok to wipe user data choose yes
after that the tablet will reboot and finish the installations and power off itself, power it on and wait for it, its will take long time for first boot so do not power it off.
Halo keyboard will not work until you do these steps By vimalbhimani on here
a) Open ‘’contacts’’ app, create a new local contact ” test”
b) Click search button at contact
c) Input ####6020# code into search bar
d) a list of country codes will po up, browser the country code list, then chose country code US and click OK
e) Then device will reboot and update, you should be able to use halo Keyboard after that.
note: i have issue with TouchPl keep stopping, had to chose google instead of Lenovo to get it to work without error
if you want to update the system to latest version (7.0.1) you can just go to update and update it.
if you have something to add please do
Thank you all.
Click to expand...
Click to collapse
I followed all of the steps and it says "Flash Failed (Fastboot) PLEASE HELP
Edit: I fixed the problem by simply rebooting it. I didn't think it would be that easy.
SameSame, but L-Version ... cannot find Stock ROM ...
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
pwallenb said:
Hi there,
I would like to downgrade 2 Tablets YB1-X90L (not F), this thread is onderful BUT I cannot find the STOCK ROM version for the L-Model (the one with LTE) ... can someone point me out as where to get it ? The background is that Nougat screwes up the playstore ... as discussed in many other threads and there is no -permanent- solution... Thank you!
Click to expand...
Click to collapse
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Could someone please help me with downgrading my YB1-X90L, it just refuses to boot at all after my nephews messed with it, I found the stock rom but I can't get some of the needed programs and drivers,
Flippy498 said:
Here's an alternative method for those who don't trust flashing tools due to bad experiences and prefer flashing files manually via Fastboot (like me):
Follow steps 1. to 3. and 5. of the opening post.
Unzip the stock rom (archive) into your ADB/Fastboot folder.
Boot the tablet to the bootloader (c.f. step 6. of the opening post).
Use the following commands:
Code:
fastboot flash gpt gpt.bin
fastboot erase misc
fastboot erase persistent
fastboot erase frp
fastboot erase metadata
fastboot format config
fastboot format country
fastboot format cache
fastboot format data
fastboot format factory
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash config config.img
fastboot flash country country.img
fastboot flash system system.img
fastboot flash bootloader bootloader
fastboot flash oemvars bootloader_policy-oemvars.txt
fastboot flashing lock
fastboot continue
Execute each of them with Enter and wait till a command got executed completely before you try to use the next one.
It might happen that you face an error while flashing that oemvars bootloader_policy-oemvars.txt. I couldn't find out why that happened and ignoring it seems to be harmless.
Follow steps a) to e) of the opening post.
Click to expand...
Click to collapse
Hello
I made this all and my Yoga-Book runs on Android 6.0.1 . But is there a possibility to get an Android Build 7.1.1? Because I can't restore my Backup it seams it is corrupt and if I try to update im configuration-app its does anything but at the end its allways on 6.0.1.
It would be great if someone can helb me.
Best regards
Peter
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
phsma said:
sorry for replying to such an old post.
could you or anyone else please reupload a 6.x stock rom for the yb1 x90L? i just cant find any working link and am currently stuck with a device without properly working wlan. wlan keeps turning itself off after a few seconds after reboot and only restarting the whole device can turn it back on again... i hope a rollback can solve the issue...
Click to expand...
Click to collapse
looks like the original link is down, so i searched for the file name YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip and this came up:
YB1-X90L_USR_S110085_1710170829_WW08_EP_ROW_otafull.zip | Easy Firmware
easy-firmware.com
ive no idea if this is working or safe to use but its a start.
good luck
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
galumph said:
So my Android YB1-X90F was locking up when trying to boot, just stuck showing the Lenovo logo. Thinking I'm clever I stubbled across the boot menu if you start the device with the Volume Up held. From there I tried the Recovery Mode and did a Factory Reset. Then the tablet started up and shows the Green Andriod Bin Man, saysi Encrypting and promptly reboots. So one starts Googling and ends up here. Some very help information, thanks for that.
So I've got as far as installing all the drivers/Intel Phone tool/Android Suite etc. but I'm still stuck. The flash is locked. Is there another way to unlock this as I can't get into Android to allow the developer options as suggested in Step 2 of the opening post?
Trying the fastbook commands in post 2 also fail
Code:
FAILED (remote: Prohibited command in locked state.)
finished. total time: 0.170s
TIA
LOL @ me, of course the manual fastboot commands fail as that's precisely what the Phone Tool App trying when doing its magic.
Click to expand...
Click to collapse
I'm in the same boat. I acquired a YB1-X90F but all it does is show the orange Lenovo splash screen, then a black screen.
So here I am reading threads. But I'm already at my first hurdle...since I can't boot into the OS and go into Developer Options to start the boot loader unlock process.
YB1-X90F No OS(?) - Flashing Help
TL;DR: Noob needs to stock flash a device that won't boot into OS. Here's how the recovery looks (without and interaction): Boot loader: Splash screen: I have acquired a YB1-X90F that just shows the orange Lenovo splash screen and or a...
forum.xda-developers.com
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Brent.M said:
Solved. I ran 'flash_update_from_user.json
Just waiting for the battery to charge to 30% to hopefully enable the Halo Keyboard.
Here are the files needed in case other links void in the future: https://drive.google.com/drive/folders/1gD9FyA03GbLZ7ZcjkyMDlhVPs4_em2rY?usp=sharing
Edit: The Android N update bricks the device for some reason.
Click to expand...
Click to collapse
any ideea why my yoga book is not visible in fastboot?
i installed drivers and platform lite indicated in drive location.
currently my yoga sbows bootloader error 05 during booting
Thank you @Brent.M I have a booting Yoga Book again
borisattva said:
found myself in the same boat and eventually came across this:
https://cloud.kolyandex.su/index.php/s/npeVhVlnJw8BFIy
hopefully it sticks around long enough for others to grab.
note that the steps are slightly different in that you have to manually select the .json in the extracted folder.
Click to expand...
Click to collapse
The link is not work anymore, could you please share you firmware for x90L model ? thanks
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy