Related
are there any developers out there creating roms for this? It would nice to have a kernel at least, i know there is one out but its only for the european version. We need developers!!
I got the time for it but not the brain for it im best at testing roms
Doesn't seem that anyone's developing ROMs at the moment, although some are trying. I think first we need to get a recovery working such as Clockworkmod so we can flash the ROMs to the device.
I just got my player a few days ago, but I've been doing some research on how to port CWM to new devices and hopefully something will come to fruition. I'm not a programmer by any means, but I know linux pretty well so hopefully I'll be able to put something together.
Does someone know where there is documentation on how to install new ROMs using Linux? I don't have windows or Mac.
I'm trying to install 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1389809
I believe the instructions are in the android developers kit, so I'll go there next unless someone has a quick pointer.
Thanks,
Daniel
I think the only way currently is with the software samsung gives you, but I might be wrong. Mine came with 2.3.5 on it - I'm using linux mint but haven't had a need to figure it out.
Some people over in the Android Development thread are working on it from what I hear. CM9 here I come!
goudeyman95 said:
Some people over in the Android Development thread are working on it from what I hear. CM9 here I come!
Click to expand...
Click to collapse
Can you show us the link from where you read it please?
OK, this is beginning to give me the s**ts. Where are all the sources to the stuff that is being posted up here? I have been trying to build (rebuild) some of the ROMS on here, if for no other reason than to check there is no dodgy code in them, but also to learn from what everyone has done.
This is supposed to be a DEVELOPMENT forum, where source code is shared and discussed. Not a bazaar where the posters do a bit of hocus-pocus putting together roms from binaries of unknown source code. They fall like crumbs from the majestic sages, that do even more unknown hocus-pocus and cast them down to the unwashed masses to oooh and aahh at, as they give homage to the great compilers in the sky. What is this? Job security?
I have no idea what the legals are around this and I don't really care. The point is that the spirit of the GPL is you post sources (or patches against standard sources) along with any binaries. The binaries are only there to save us the bother of recompiling. The source is what is important in this forum. How else are others going to improve on the code if they can't see it?
I have posted on a couple of threads and/or contacted various people on here, most of whose response is "oh I didn't compile the actual source code, I just stuck it together from the binaries". One of them (thanks kevinlekiller) was kind enough to at least give me rundown on what he did (as best as he could remember - bit of a worry!), but even he didn't have access to the source code. Maybe I haven't looked in the right place, but it shouldn't be this frigging hard - it should be front and centre.
If I had my way, I would ban every ROM post that didn't have a clear link back to all the sources. That's what github etc is for!
Please, please, people, post the source first, binaries can be an afterthought. If you don't have access to the source code, then I reckon it shouldn't be here - who knows what in there? One of these days someone is going to innocently distribute some nefarious program with a ROM. It really isn't that hard to compile a ROM - takes about half an hour on my Linux laptop.
This is actually standard xda-developers policy: see http://forum.xda-developers.com/showpost.php?p=2031989&postcount=45 but seems to be widely ignored.
OK, I'll get off my soapbox now.
Edit: I realise this doesn't apply to everyone, some people are great about posting sources.
Wrong section buddy
Sent from my GT-S5830 using xda premium
djsky2011 said:
Wrong section buddy
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Huh? You're joking right? I'm discussing the sources not being available in this section, the source is a development topic. Hmm maybe this is such a common complaint that there is a separate section created for it. Sorry I'm getting crabby.
What section should it go in?
You take 30mins , mine takes 2h - it's different for everyone......
Furthermore , if they're basing a ROM off a ROM , what sources are there to be published ?
Furthermore , the sources can already be found online if you want CM7/AOSP:
http://github.com/teamhacksung/android_device_samsung_cooper
Herpderp Defy.
ok man make a rom then talk to us. most of roms here are like this u got new app,launcher and theme voila new rom is posted(no offense).so they cant give you source code.they make roms from the prebuilt ones like using stock or cm7 as base .most of the developers which made roms from source code had there github accounts link in there username ok i agree there are one or two developer who dont share but that dose not mean everyone here is just like them.ok
1.i can make a rom.
2.but i will not make a one unless i compiled it from source code.
3.sure i will share its source code.
i agree a little bit with you
EmoBoiix3 said:
You take 30mins , mine takes 2h - it's different for everyone......
Furthermore , if they're basing a ROM off a ROM , what sources are there to be published ?
Furthermore , the sources can already be found online if you want CM7/AOSP:
http://github.com/teamhacksung/android_device_samsung_cooper
Herpderp Defy.
Click to expand...
Click to collapse
Finally. Thank you! A link to the source code (actually the config files is just what I looking for).
So, since I have your attention, I see a couple of roms from people like vo-1, what is he doing just compiling the source (I have asked him, no reply)?
On the ROMS based on ROMS thing, while there is technically no source code you put through a compiler - there is still source - it is a list of all the changes made to that ROM.
I also can't believe people don't seem to use any sort of build environment - as in a build script - how else are we going to document what's been done and/or recreate it?
xdaboy122 said:
ok man make a rom then talk to us. most of roms here are like this u got new app,launcher and theme voila new rom is posted(no offense).so they cant give you source code.they make roms from the prebuilt ones like using stock or cm7 as base .most of the developers which made roms from source code had there github accounts link in there username ok i agree there are one or two developer who dont share but that dose not mean everyone here is just like them.ok
1.i can make a rom.
2.but i will not make a one unless i compiled it from source code.
3.sure i will share its source code.
i agree a little bit with you
Click to expand...
Click to collapse
Yes I agree this does not apply to everyone. Some people do post source. I suppose my frustration was the source seemed to be forgotten and it shouldn't be so hard to track it down. Maybe I have spent too much time in the Linux world, where source code is king.
I will kick off a make on the source that EmoBoiix3 linked to (thanks mate) and see where we go from there!
A lot of roms here are based off other roms. So much they don't build it themselves, just some editing of the zip.
Other developers merely want to save the technobabble since most xda users are blind to programming.
divereigh said:
Huh? You're joking right? I'm discussing the sources not being available in this section, the source is a development topic. Hmm maybe this is such a common complaint that there is a separate section created for it. Sorry I'm getting crabby.
What section should it go in?
Click to expand...
Click to collapse
still wrong section
this aint a source
this is a discusion so its supposed to be in general section
Should be in general section IMO.
But I fully agree with the OP. It is true lots of ROMs here are "cooked" from other ROMs and are not "developed" denovo. They are "theme" packs.
But for example we have two groups actively working on builds of CM 7.2, they each seem to be building from source and tweaking fixes in. It would really help if everyone used github. Pull a source, build, fix and commit to your fork. Anyone else can see what you changed, what revision of the tree you used, and can learn from your work and it could perhaps inspire them to fix something else, to contribute back to make *your* build better.
Sharing your code, even if it is just 5 line hack on teamhacksung / cyanogenmod /AOSP source, honours the GPL and helps our community grow stronger.
The GalaxyICS team is a great example, I can see where they've pulled their sources, what (hard) work they've done in what components. They are contributing all their work and knowledge back. And their fixes can be pulled into other projects easily, speeding up development and sharing that knowledge for everyone.
A phone like the Ace continually loses developers as they migrate to "better" phones, and we really need to share as much knowledge as possible to keep our software
Sometimes , changes just cannot be shown.....like framework-res tweaks!
Herpderp Defy.
EmoBoiix3 said:
Sometimes , changes just cannot be shown.....like framework-res tweaks!
Click to expand...
Click to collapse
What sort of tweaks are you thinking of? If it's a replaced image file, then that can be a separate file copied in with a script. If it's a changed text file, that can be done with patch or sed.
Let me give you an example of what I did with kevinlekiller's The End 2.5o rom. He based it on a vo-1 rom and did a fair number of replacing files, odexing etc. I produced this bash script (attached) along with his extra (binary) sources which I think replicated what he did. Self documenting! Everyone can see what is in there, maybe even change it again.
More details towards the bottom of this page: http://forum.xda-developers.com/showthread.php?t=1440396&page=31
I see where you are coming from and I sympathize. I'm not a developer, because I don't have the time and patience to work on source code , compile , debug etc.
The Rom's we have for the Galaxy Ace are already very good, the developers that have worked on them have/had the time and patience to iron out most the issues. So for me to try to come out with something better would seem futile.
I still like customizing these Rom's to a way that work better for me, and it doesn't involve having to spend lots of time, because like I said they are already very good. So it just ends up that a few files are added or changed.
Is that a bad thing? I think those that think it is should just not use those types of Rom's, everyone has a right to their opinion.
At first when you asked me for sources, I thought you meant the source code, since I already listed everything that was used in the first post. But then I realized you wanted direct sources (links) to those files. This is something I will do in the future, post the links of every file, I agree with you , things should be more documented, it would save everyone time instead of trial and error and possibly even giving up.
Anyways, I should conclude here, it is getting a long read.
divereigh said:
What sort of tweaks are you thinking of? If it's a replaced image file, then that can be a separate file copied in with a script. If it's a changed text file, that can be done with patch or sed.
Let me give you an example of what I did with kevinlekiller's The End 2.5o rom. He based it on a vo-1 rom and did a fair number of replacing files, odexing etc. I produced this bash script (attached) along with his extra (binary) sources which I think replicated what he did. Self documenting! Everyone can see what is in there, maybe even change it again.
More details towards the bottom of this page: http://forum.xda-developers.com/showthread.php?t=1440396&page=31
Click to expand...
Click to collapse
nice script, thats for sure
but u shouldnt expect everyone to be as geeky and provide such build script.
theres a big different between "providing source" that is mandatory by forum rules and "providing howto step by step" like in your script.
hell most of the roms (the one that is based on previous precompiled rom) were created 100% on windows machine without even touching linux, and maybe the rom creator (modder) doesnt have any clue what in the world is linux. maybe they even dont know that their windows machine do have terminal (cmd). so arent u asking for too much?
an0nym0us_ said:
nice script, thats for sure
but u shouldnt expect everyone to be as geeky and provide such build script.
theres a big different between "providing source" that is mandatory by forum rules and "providing howto step by step" like in your script.
hell most of the roms (the one that is based on previous precompiled rom) were created 100% on windows machine without even touching linux, and maybe the rom creator (modder) doesnt have any clue what in the world is linux. maybe they even dont know that their windows machine do have terminal (cmd). so arent u asking for too much?
Click to expand...
Click to collapse
Actually I only have 1 windows pc, all my other PC's are ubuntu / linux mint installed on them. I use windows on the main PC because most of my games work on it.
Edit: And, I didn't take offense to your post , it is valid, most people have no clue about linux.
kevinlekiller said:
Actually I only have 1 windows pc, all my other PC's are ubuntu / linux mint installed on them. I use windows on the main PC because most of my games work on it.
Edit: And, I didn't take offense to your post , it is valid, most people have no clue about linux.
Click to expand...
Click to collapse
and no offence intended and sorry if anyone feels my post abit too offending
my point is a rom created from previous precompiled rom can be created 100% on windows machine.
in that case the rom also doesnt have sourcecode because it were created from already precompiled rom.
so if the modder just give a valid link to what he put/change it still suites the forum rules to provide source.
let say i've modded a cm rom, i've include ketuts oc kernel, i've include a launcher, and a filemanger, and a theme.
so if i just provide a valid link to the original cm rom, a link to ketuts oc kernel thread, a market link to the launcher, the filemanager and the theme, thats a valid source because the rom were modded from binary precompiled rom/kernel/launcher/filemanager/theme.
so the link to those binary precompiled rom/kernel/launcher/filemanager/theme is a valid "source".
divereigh said:
This is supposed to be a DEVELOPMENT forum, where source code is shared and discussed. Not a bazaar where the posters do a bit of hocus-pocus putting together roms from binaries of unknown source code.
Click to expand...
Click to collapse
I agree. There are two groups of devs:
"Real" developers. They provide repo links and detailed changelogs.
Modders. They should provide repo links and detailed changelogs.
A repo has the benefit of allowing peer review. Peer review improves code quality just like user tests and their reports do. Afterall, this is what XDA is about.
What I like about XDA is how people eagerly send in "works" notes. Not much information, but better than just trying out and telling nobody.
Exactly guys......it seems cyanogenmod has become the only alternative and devs here are only editing it and bringing out new firmware versions. Some also edit stock roms..........but no one here gave a thought of creating a new genre of custom rom right from source.
biswatmak said:
Exactly guys......it seems cyanogenmod has become the only alternative and devs here are only editing it and bringing out new firmware versions. Some also edit stock roms..........but no one here gave a thought of creating a new genre of custom rom right from source.
Click to expand...
Click to collapse
its not as easy as it sounds, thats why the two main dogs are miui and cyanogenmod.
an0nym0us_ said:
nice script, thats for sure
but u shouldnt expect everyone to be as geeky and provide such build script.
Click to expand...
Click to collapse
I get that. I essentially built an interpreter and a source file (the build instructions). Way too much for most. However I think it would be great as developers if we provided be packaging tools so that others can use them and provide repeatable builds and automatically documented builds ("read the source luke").
an0nym0us_ said:
theres a big different between "providing source" that is mandatory by forum rules and "providing howto step by step" like in your script.
Click to expand...
Click to collapse
Agreed, it isn't mandatory, however for the purposes of educating and peer-review it would be great. So my challenge is to make this easy for people.
an0nym0us_ said:
hell most of the roms (the one that is based on previous precompiled rom) were created 100% on windows machine without even touching linux, and maybe the rom creator (modder) doesnt have any clue what in the world is linux. maybe they even dont know that their windows machine do have terminal (cmd). so arent u asking for too much?
Click to expand...
Click to collapse
So we need a graphical version for Windows..
Lemme get some things out of the way.. I am a noob. I have searched. I have read some of the results from the search. I am overwhelmed by the 20+ pages of results (lol). I am not 100% sure this is the correct forum for this (not sure where else would be ).. I believe this is one of those things where I need help based on my situation.. Ok, so here I go.
I wish to start porting ICS to my phone. That's my goal. I have general understanding of how linux works, but I do not know much about the android specifics of how they work, or what needs to be modified for this to work. I do not plan to use the kitchen tool as I wish to learn this the hard way. I believe this will help me become more understanding in what I am doing. However, at this point I don't and that's why I'm here. My phone model is irrelevant almost because its prepaid and usually the communities don't even recognize their existence.. at least that's how I feel about it. But I digress. My phone is the zte warp by boost mobile and I am here to learn hopefully the things that will get me started on porting ICS to this phone. I right now believe that the best thing for me to learn is how the android related files work because as it is, I only looked at guides on how linux works and I understand most of it. I'm not sure that's the best thing that will help me port ics, but I'm certain it is important.
Please help me figure out where I should start in learning how to port ICS to my phone basically.
Thanks XDA
anyone? I am quite serious about wanting to do and go into this but I have yet one thread that anyone's ever replied to.. (or post iirc) which puts a damper on me
Snake X said:
Lemme get some things out of the way.. I am a noob. I have searched. I have read some of the results from the search. I am overwhelmed by the 20+ pages of results (lol). I am not 100% sure this is the correct forum for this (not sure where else would be ).. I believe this is one of those things where I need help based on my situation.. Ok, so here I go.
I wish to start porting ICS to my phone. That's my goal. I have general understanding of how linux works, but I do not know much about the android specifics of how they work, or what needs to be modified for this to work. I do not plan to use the kitchen tool as I wish to learn this the hard way. I believe this will help me become more understanding in what I am doing. However, at this point I don't and that's why I'm here. My phone model is irrelevant almost because its prepaid and usually the communities don't even recognize their existence.. at least that's how I feel about it. But I digress. My phone is the zte warp by boost mobile and I am here to learn hopefully the things that will get me started on porting ICS to this phone. I right now believe that the best thing for me to learn is how the android related files work because as it is, I only looked at guides on how linux works and I understand most of it. I'm not sure that's the best thing that will help me port ics, but I'm certain it is important.
Please help me figure out where I should start in learning how to port ICS to my phone basically.
Thanks XDA
Click to expand...
Click to collapse
From my limited knowledge, I think it is a huge task undertaking, you can download Android source code from Google, the hard part will be the device driver development and porting for Linux kernel (and maybe portion of Android). If you are lucky, you can use the existing phone bootloader (or you have to port one). Understanding the inner of the phone (different chip set may need different device driver) will be another challenging task.
by the device driver development, you mean all the libs that go into the phone? Couldn't I just copy/paste the pre-existing libs that are already made for the phone? Also the phone im working with is a bit strange really.. noone has been able to compile the kernel from its source and get it to boot yet.. when it was compiled the zImage was different than that of the stock one.
And yeah, I have downloaded the aosp source.. I just need to know where to start at and the processes involved really
Snake X said:
by the device driver development, you mean all the libs that go into the phone? Couldn't I just copy/paste the pre-existing libs that are already made for the phone? Also the phone im working with is a bit strange really.. noone has been able to compile the kernel from its source and get it to boot yet.. when it was compiled the zImage was different than that of the stock one.
And yeah, I have downloaded the aosp source.. I just need to know where to start at and the processes involved really
Click to expand...
Click to collapse
To answer you question no the drivers and lib files are different for aosp based rooms then they are for the stock OEM from. The first step will be to get a working kernel. Without anything you do will be pointless
I'm somewhat interested in the same thing, and from what I've gathered, you'll need to do these things to begin ROM development:
1. Read every page on the AOSP site and grab a copy of the AOSP source. It probably wouldn't hurt to read the regular Android developer wiki as well.
2. Learn about Linux driver development:
http://lwn.net/Kernel/LDD3/ (this is apparently considered THE BOOK on Linux driver development)
http://www.freesoftwaremagazine.com/articles/drivers_linux
3. Learn pretty much every detail about your phone and its hardware, especially when it comes to how ROMs are installed on it. For example, my phone (the Droid X2) has a locked bootloader, so 2nd init has to be used to boot new ROMs, and this makes it so that we cannot update the kernel.
You can usually find this sort of information on your phone manufacturer's website. Sometimes they even post the source code to their phone's drivers, which is helpful.
4. Look at other ROMs (preferably for your phone) and see how they work. The source code is freely available for most popular ROMs.
For example: CyanogenMod keeps their source code in a public git repository: https://github.com/cyanogenmod
5. Get to work on porting!
I would highly recommend starting with something smaller, however, just as a start. One good jumping-off point is probably this guide: http://forum.xda-developers.com/showthread.php?t=1272270
If any part of this was wrong, or if I left something out, somebody feel free to correct me, I'm still a noob.
Thank you so much for your direction, however,, android kitchen.. im not sure about that because isnt that only ment for htc devices? My phone is made by zte
what device do you even have?
if it's stuck officialy on 2.1 or 2.2 there's no hope that if you even port it that it'll work
its the zte warp from boost mobile (prepaid). Btw if I compile an aosp ics launcher and put that on my phone whats the chances of that working?
edit: it uses 2.3.5
Well Sebastian responded on android forums, apparently zte is very bad at version control with their kernel sources. So when they complete one project, they use the same source for the next project, and what they release could be for anything. Apparently the blade source had the same issues, it took him a while to get them to correct the source
Sent from my N860 using Tapatalk
Yeah I noticed that there were ppl saying there were things similar but I'm not sure what will work or what won't.. guess its time to start a petition on zte to release the source code lol
edit: seems like zte's bein a bad company and violated the GNU GPL license for not providing a complete source code.. I compiled an email and sent it to someone who can proof read it and send it to the right person for this kinda thing.. danggit zte
Hi all,
i want to start with AOSP 4.2 for our SGS3 i9300 - is anybody interested to develop and publish a AOSP based rom with me?
I'm a real application developer (C,C++,JAVA,PHP,MySQL,some Oracle PLSQL) and now its some cold out - i have time to do
some nice things
I think a team of 2 or 3 developers should be enough to develop on this rom, as we can use a lot from AOSP 4.1.2
### EDIT
As long as no one has found to help, here a short description of current progress:
- Code is pure based on AOSP 4.2 but some snippets of CyanogenMod to bring up hardware (camera,graphics,audio)
- Device is bootable (no other boot.img required anymore)
- Bootanimation is working
- Mount of partitions is working
- Deodexing is working
- adb, debuggerd and root access is working
Not working: a lot
- Graphic not working perfect, needs a kernel patch or a working gralloc/hwcomposer/hwconverter to work without laggy PMEM)
- Camera can not be activated due to a missing function call (undefined reference, maybe it can be solved with a newer driver)
- Audio: missing speaker device (Code have to reworked to work with stagefright and tinyalsa libs)
- USB/internal SDCard: cant be mounted (error message sounds like the device is mounted twice, have to find the error in init process)
- RIL not working (Java file from CM10 have to be integrated in frameworks/opt/telephony)
Currently, i'm working on the Graphic problem and USB part to bring up the device to a stable UI
Way to go man. Good luck to you!
Good luck ...!! Im waiting
Sent from my GT-I9300 using xda premium
Good evening,
Well how have you imagined that? Do you have build something like that before or would this be your first attempts to build up a rom from scratch? Do you know what's all necessary to contribute for that?
I would try to help you, but I have clearly to say that I haven't done anything like this before. I'm in the last term of my study of technical computer sciences, working in a company as application programmer for C/C++ and Java(Android). Due to my studies I have also some knowledge about hardware programming, down to read/writing some code in assembler. I would be interested to this if I get introduced to the topic and some help with the necessary tool chain wouldn't hurt too ^^.
greetings
hop3l3ss1990 said:
Good evening,
Well how have you imagined that? Do you have build something like that before or would this be your first attempts to build up a rom from scratch? Do you know what's all necessary to contribute for that?
I would try to help you, but I have clearly to say that I haven't done anything like this before. I'm in the last term of my study of technical computer sciences, working in a company as application programmer for C/C++ and Java(Android). Due to my studies I have also some knowledge about hardware programming, down to read/writing some code in assembler. I would be interested to this if I get introduced to the topic and some help with the necessary tool chain wouldn't hurt too ^^.
greetings
Click to expand...
Click to collapse
I have successfully built a rom in year 2010 for the LG-P500 device, based on CM7 and modified it in a strange way, so i included a lot of nice things
written from scratch - this rom was a unicate ... later, i developed the "Phoenix Launcher" for Gingerbread enabled devices, but its development is currently
frozen because its strange to support every or almost every device with a bugless launcher. In the last months i learned a lot about android and have to re-think about
what i'm able to do, and what i want to do. In the summer of 2011 i bought my SGS3, the first thing i was doing was to remove that samsung crap from my device and
have installed AOKP. So now it's time to do my own thing again - i want to have AOSP as i think for me its the best Android solution for myself and want to publish it
to other users who think "thats ok for me" too
In short, it doesnt matter if its your first rom - its enough if you know about basic things like "how is android doing all that nice things", "how to debug code", "how to fix
some bugs (even strange bugs)" and some experience with git and github. All other you can learn in a very short time - i've learned the most of things with try & error
andy572 said:
I have successfully built a rom in year 2010 for the LG-P500 device, based on CM7 and modified it in a strange way, so i included a lot of nice things
written from scratch - this rom was a unicate ... later, i developed the "Phoenix Launcher" for Gingerbread enabled devices, but its development is currently
frozen because its strange to support every or almost every device with a bugless launcher. In the last months i learned a lot about android and have to re-think about
what i'm able to do, and what i want to do. In the summer of 2011 i bought my SGS3, the first thing i was doing was to remove that samsung crap from my device and
have installed AOKP. So now it's time to do my own thing again - i want to have AOSP as i think for me its the best Android solution for myself and want to publish it
to other users who think "thats ok for me" too
In short, it doesnt matter if its your first rom - its enough if you know about basic things like "how is android doing all that nice things", "how to debug code", "how to fix
some bugs (even strange bugs)" and some experience with git and github. All other you can learn in a very short time - i've learned the most of things with try & error
Click to expand...
Click to collapse
This all sounds interesting for me and yes I like the idea of developing a own clean rom with some cool additional stuff, too. But what would be the first steps to a new rom? Have you begun with all the administration stuff like setting up a new gitrepo, make a to do list etc...?
I think Code debugging and writing some new stuff wouldn't be a problem for me but what are you meaning excactly with "how is android doing all that nice things"? How it build up, deep level architecture? Well, I know how the "normal" Linux system is working, how modules are getting loaded into the kernel... But how this is correctly working on android I have to learn at first and if there is a chance to do that I would do it
Currently on my S3 is SlimBean and till that there is still no update to 4.2 I'm happy with it, but exploring something new would be pretty cool
Do you have an IRC chat room or something like that? I've to go offline now, my girlfriend wants more attention.^^ But If you want, I' m willing to try to contribute to the rom
PS. I'm sorry for my bad English and hope its understandable, but outside from here you can talk to me in German ^^
If you want to help the AOSP experience on our phones the best place to do it is with the CyanogenMod guys. You'll find pretty much everything based on AOSP (including people that port Vanilla AOSP and AOKP) is using a CM kernel.
They're likely working on the merge now in terms of getting CM10.1 out (with Android 4.2) but most of our CM guys are pretty burned out on working with Samsung's subpar reference material to get basic stuff working (mostly HWC). If you think you could help with this, this would be provide a massive boost to the whole community that want to run these phones on an AOSP based ROM and they would be very grateful.
Gotta warn you though it sounds like it'll be an uphill struggle to get the rest of the stuff working right; unless Samsung release some decent sources for HWC.
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
andy572 said:
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
Click to expand...
Click to collapse
Wish i could help (just started learning JAVA ) ! gl with this awesome project
Nice to see you here, I remember you from the P500 forums.
Xda user krarvind should be able to give you some useful hints, you will have to contact him through the RD forum as his pm is locked down, or I could possibly put him in contact with you
slaphead20 said:
Xda user krarvind should be able to give you some useful hints, you will have to contact him through the RD forum as his pm is locked down, or I could possibly put him in contact with you
Click to expand...
Click to collapse
Thank you, it would be nice if you can contact him
andy572 said:
Thank you, it would be nice if you can contact him
Click to expand...
Click to collapse
Ok, will mention it to him
andy572 said:
Currently i have only downloaded the AOSP sources and started to integrate most of the configs. Currently it cant compile because AOSP is not AOKP/CM10
where i got the device and vendor directories, so i have to make some changes in the basic system. if it's compiling to the end, i open a fresh github account
and upload all my modifications. The compile process stops currently on audio,OMX plugins, graphics and camera - most of that are small pieces of changes
i have to make - i think, tomorrow (its monday in germany here) i can upload all and then we can start to develop on
Click to expand...
Click to collapse
How it's going forward?
Maybe it could be useful to publish the github link when it's ready and some more information like staus, on first post
In the next days I have some trouble with my exams ( in two weeks I'm completely finished with my studies ^^) but I think if there is something to do I'll find some time to work on.
Good Luck Dude~
I haven't tried AOSP yet.
Hope someday i can give it a go.:silly:
hop3l3ss1990 said:
How it's going forward?
Maybe it could be useful to publish the github link when it's ready and some more information like staus, on first post
In the next days I have some trouble with my exams ( in two weeks I'm completely finished with my studies ^^) but I think if there is something to do I'll find some time to work on.
Click to expand...
Click to collapse
current state:
- patched android/build so we can compile the kernel within the main compile process
- patched android/build main.mk file so we can use OpenJDK or Oracle JDK
- added android/vendor/aokp and android/vendor/samsung tree from AOKP (its the most useful directory structure)
- added android/hardware from AOKP so we have all that Exynos things that are needed, even by AOSP
- modified android/frameworks/native/include so a OMX Plugin header can be found
- modified android/libhardware and patched gralloc module
currently it compiles to the Webkit library, most of all apps, libs and binaries are building without errors - the next problem
to solve is the PRODUCT_COPY_FILES ****: nothing of proprietary files are copied to the android/out directory, seems like
a bug in android/build too.
For only 2 days trying to compile to the end without errors its a very good cut
here we go: it compiles to the end and a flashable "JOP40" zip could be created
tryed to flash, but it gives errors in CWM: have to remove the recovery folder and the recovery.sh file from etc folder in the ota zip file, but it doesnt boot up - got a black screen only.
do we need a new or patched kernel instead the CM10 smdk421x one?
Well does it have all the closed source libraries fron the phone? If not, it wont boot. Dont think i am calling you stupid, you obviously know what you are doing, but maybe you forgot. Idk. Check that. Try running a log cat and debug that.
Sent from my GT-I9300 using xda premium
b-eock said:
Well does it have all the closed source libraries fron the phone? If not, it wont boot. Dont think i am calling you stupid, you obviously know what you are doing, but maybe you forgot. Idk. Check that. Try running a log cat and debug that.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for the hint, yes i have all files included - i cant connect to adb, i see only small colored point on the top left side and a sensor
is red blinking (the one to the right of the speaker.
That would be the proximity sensor near the top front speaker. Cant connect, adb binary in /system/bin or xbin?
Sent from my GT-I9300 using xda premium
Hello there guys,
As we all know we only have 3? 4? developers for the HOX+ . And they are really doing all they can to help keep the phone upto date.
But as we all know they are all busy and can't update their roms that much any longer.
EDIT: Lloir already has a guide : http://forum.xda-developers.com/showthread.php?t=2187266 but I don't think he covers how to fix camera and gps and stuff
So! Is it possible to make guide on how to compile the rom from the source? I know tombridden and lloir already made a one post guide on how to build some roms but it was too specific.
I now have an extra machine (a laptop) with 500gb free storage and ubuntu as the main OS. It's quite powerful too with 6gb RAM and i7. So Why not use it to help the community while others are busy? In the meantime I will look around for some guides for other phones but I don't think they will help that much.
And please include the answers to those questions if you make a guide:
1- What to do to fix camera/GPS/wifi/Data/sensors ?
2- What approach should I take when compiling a new ROM. For example: there are no developers for PACMAN , how will it differ during compiling between it and AOKP/CM/AOSP .
I am talking about a rom that wasn't approached by Lloir so he won't have the repos for them. What to do then?
Thanks a lot and I can't wait to help
@Lloir @tombriden @PippoX3 @mike1986. and any other developer out there.
you can start by looking at XDA-University
The reply is correct. All of us moved first steps studying at XDA University.
Anyway the case is more complex than others.
For this device there are really few developers. Other device have a lot of support from constructors, many dev and the team-work result in a lot of kernels/roms to flash for the final user.
If you wanna taste the happyness for build a rom, I'll send you a guide to setup your ubuntu, download the sources and build.
But in this case, where enrc2b is not officially support, the things are more difficult.
You must have a minimal practical with java, cpp, android and kernel code (if so).
For the moment I'm in trouble to build an AOKP 4.2.2 with new kernel. I haven't device to try, 'cause the hard is build&&try continuosly.
Not the fact to have a pc turned on for hours and hours.... and the eyes&&mind open for hours and hours... but the patience to continuously try time after time.
Now I am in a dead point... many users like have S2W enable on new CM kernel... but.... the kernel won't!
Thanks a lot anyway. Thanks to @Lloir, @tombriden, @maxwen and alls who's workin' for this device.
Stay tuned....
PippoX3 said:
The reply is correct. All of us moved first steps studying at XDA University.
Anyway the case is more complex than others.
For this device there are really few developers. Other device have a lot of support from constructors, many dev and the team-work result in a lot of kernels/roms to flash for the final user.
If you wanna taste the happyness for build a rom, I'll send you a guide to setup your ubuntu, download the sources and build.
But in this case, where enrc2b is not officially support, the things are more difficult.
You must have a minimal practical with java, cpp, android and kernel code (if so).
For the moment I'm in trouble to build an AOKP 4.2.2 with new kernel. I haven't device to try, 'cause the hard is build&&try continuosly.
Not the fact to have a pc turned on for hours and hours.... and the eyes&&mind open for hours and hours... but the patience to continuously try time after time.
Now I am in a dead point... many users like have S2W enable on new CM kernel... but.... the kernel won't!
Thanks a lot anyway. Thanks to @Lloir, @tombriden, @maxwen and alls who's workin' for this device.
Stay tuned....
Click to expand...
Click to collapse
That's what i did already. I set up the periphals/kernel/device info GITs and now i am looking for the roms, I found CM and stuff but I can't find PURE AOSP , does that mean i must download it and upload it?
I also have Oracle java installed. Do I have to have open JDK?
Ghand0ur said:
That's what i did already. I set up the periphals/kernel/device info GITs and now i am looking for the roms, I found CM and stuff but I can't find PURE AOSP , does that mean i must download it and upload it?
I also have Oracle java installed. Do I have to have open JDK?
Click to expand...
Click to collapse
https://github.com/pure-aosp/android
Lloir said:
https://github.com/pure-aosp/android
Click to expand...
Click to collapse
Now that we begin to have a solid CM base, will possible to build at least CM for enrc2b for noobs too.
And eventually "port" device/kernel" parts to others platforms. So who like e.g. PA can do...
If you agree, I can paste my personal appoints to a guide, from client setup (Sun java don't works) to the build zip rom.
Updated and corrected to last KK.
PippoX3 said:
Now that we begin to have a solid CM base, will possible to build at least CM for enrc2b for noobs too.
And eventually "port" device/kernel" parts to others platforms. So who like e.g. PA can do...
If you agree, I can paste my personal appoints to a guide, from client setup (Sun java don't works) updated and corrected to last KK.
Click to expand...
Click to collapse
Go for it. Saves me doing it which I was about to do
Sent from my One X+ using Tapatalk