Can anyone show me how to enable in-call softkey function??? During call, my display is off and cannot use softkey, if there is an extension number, I have to wait until operator pick up or even cannot see which number is calling via call waiting function.
My ROM is original HTC ROM, don't ask me to load cooked ROM
Thank you
Did it ever work before?
This is the standard:
The display turns off once you put your device close to your ear.
Moving away again should turn back on the screen.
Now there are 2 possible issues:
1) The sensor is malfunctioning
2) The driver/system is malfunctioning
Since you don´t mention if the problem arose after you did something, one cannot offer you better help. Maybe you already tried a hard or a soft reset?
Thanks tictac,
I did upgrade firmware and problem temporary solved
Related
Hello all,
I'm new here, have read lots of the information available, but came here looking for an answer that I haven't found yet.
Situation is the following.
I got this Qtek2020 (or XDA II) from my dad who used it for his work. The reason he stopped using it is because the "phone" function itself is kind off acting weird.
Sometimes it is just nog possible to get into phone mode, neither of the two methods make te device display the dial pad...
- hitting the green button
- going Start-> phone
(It's kind off like a non responding program in windows when you want to execute it)
To make things clear, the phone works fine if we go to contacts and then choose the option to call the contact.
The question is, does this problem seem familiar and is there a way to fix it by for example putting a new rom on the device?
Any help or input about this is greatly appreciated.
Thanks in advance
I think the HARD RESET should help . After a long... long work configuration data and other settings going to be ... melted . If U don't store on devise impotrant data just remove the battery for about 20 mins .
Hi
Please, I need your help, I have a serious problem with my htc tytn 1 :
Herm200
Radio: 1.47.00.10
the problem is that my phone's keypad fate alone, and sometimes make calls alone!
what should I do?! I have to flash ! but by what flash!
Go to start>settings>system>Key lock>Lock all buttons but power button.
This should stop it activating if the buttons other than the power button on the side are pressed...
Cheers...
Hi ultramag69
but my HTC done it alone, I do not touch it! and not even in my pocket! when the phone keypad sort, sometimes gives me a message with "3g not available, click on ok if you want to leave a voice message"!
and call the last number in my call history!
and sometimes the two buttons for call "Green & Red", not works!
is a possible problem with the ROM!
but I installed the official ROM HTC TYTN and I still have that problem!
and I had not this problem before. just lately!
that's going on with my HTC not!
No one can help me! pls
What should I do!
I have no hope now
have you thought that maybe its the circuitboard thats at fault and not the rom? maybe the call button is broken and that is what is making it dial your last number?
If you press the call button the dial pad appears , which is probably why the 3g signal message appears because the video call button was pressed, also why the last number is being dialled which is what happens when you press call twice. If you constantly delete your call history, it wont be able to call. But i know that isnt really a soloution to the problem.
The simplest way of finding out if it is the call button that is causing the problem is to lock the keys as ultramag69 has said, then the software part of your phone cannot activate the buttons. If the problem persists then you have a fault with the motherboard connections.
Thats my view on it anyway, i had a similar problem years ago with a wallaby and the call switch on the motherboard was the problem
I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.
I always have same problem of keyboard of Call !
yes it is possible that I have problem with motherboard! or I did a bad flash!
Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!
thx
I think it sounds like more of a hardware problem...
After flashing with a few different ROMs, the problem should have fixed itself by now if it was software.
You may need to open Her up and poke around, use the "HTC service manual hermes" to do a search to find on the wiki for good instructions to open.
I have also this problem
i think it's abaut with hard spl end spl
how i can find the spl
i have already hard spl
but the pocket, clos end open alone the programs
for i 4 or 7 min
end plis need help
i think i'ts problem in the spl end, Rom somethink do not go together
need help ........
that is what I thought too
possible problems with hard spl!
but I repeat the flash a lot of time and I now see that it works yet.
sorry to be open about twice
http://forum.xda-developers.com/showthread.php?p=3370514#post3370514
Hey Everyone
I am facing a problem in my xperia x10. When I get a call while in a current call, my phone automatically puts the first call on hold, and answers the second call without giving me the option.
What is the problem and how could i fix it?
Thanks
Similar thing happens to me when I switched to a MIUI rom, i guess a different dial-er could fix the problem but I don't know how to do that xD
even i am facing the same problem on my new htc sensation,,,pls someone help
Dear memeber
i have a new problem with my htc legend its sometimes when i need to do something the touch screen give me a wrong selection and other times it not respond ,,, i do a restart for the phone and it back to work .. but i can't keep turn the phone off and re on it if somebody no how to fix this error its will be great and i keep the screen clean from everything i keep clean it but that is not help
Hello,
It happens too with my old ROM (B0.4.8), but didn't find the origin of the problem.
Sometimes it happens with my new ROM (CM9 Beta4) but only when I charge it (when by USB), as soon as I disconnect the cable, the phone is functionnal...
yeah but its not a problem with the room because i didn't do anything for the Os on it .. it just start like this sometimes it respond other times no .. if it work you have to made a selection many time or restart the phone
I experience it too. As I remembered after installing HomICS Venus this problem occur. I do not know whether its ROM related or not. I tried to flash another ROM ex. BlaYO ROM and CRQ 1.3 but the problems still persist.
I had this problem too - sent it to HTC and they exchanged my Legend for a new one ----- as I heared it is a common problem and has to do with the grounding of the touchscreen -> that is why it works sometimes and sometimes it doesnt
Sorry to say that I too suffer from this problem. Also, the part of my screen, where the power widget on the notification bar is resting, is completely unresponsive. I need to use the trackball to hit those buttons. And also, sometimes the screen can just go bananas and go into spasmic movements on its own. In my frustration once I hit the screen really hard with my knuckles and that temporarily fixed the spasmic movements. But it still reoccurs. I assume I would need my warranty to replace my phone, but my warranty has already ran out.
I can also confirm that it has NOTHING to do with your ROM. It started for me when I was running CyanogenMod 7.1, but I still have the same problems on stock ROM, HomICS, Miui, basically any ROM.
Hello!
I recently switched to the m4 from my trusty LG OG, an it is perfect except for one thing... it doesn't ring.
I have tried all Sony-solutions, including PC software repair, etc... but no joy. My wife also has an M4 and has the same problem.
It is worked-around by using a 3rd party lockscreen (I use Hi-Locker), which is awesome.. but not ideal due to security problems, most notably Android Pay.
My question?
Can I replace the lockscreen at the ROM level? Can I replace the basic function with maybe a lockscreen from the Z5?
Unless someone knows how to fix this
I have never compiled my own rom, but I have a reasonable level of tech-savvy. I can flash ROMS and do work in Linux.
I have rooted and unlocked my bootloader, and I am using Stock Sony ROM
I have the latest firmware
Kernel 3.10.49
build 26.1.A.2.99
I have NOT tried using an old firmware- or an alternate ROM. I probably will, but my wife doesn't love the idea for her. Thus, I would like to work out a precision fix.
My thoughts?
Idea 1. find where the stock lockscreen/security module lives.. and try and replace with something from a different phone.
Possible?
Thank you for reading.. I know some other people have these problems, as I read them in threads here.. but I didn't find much in the way of fixing.
just for reference- THIS is the problem.
just for reference- THIS is the problem.
Mustang243 said:
My phone doesn't ring when it 's locked. If phone is unlocked ringtone rings and vibrates. When it's locked no sound or vibrate. Whatsapp messages vibrate but they have no notification sound. I have checked all the settings, volume is up. Last resort is factory reset but i'm not there yet. I don't wanna lose all my settings.
E: Okay I used Sony PC Companion and used the Fix phone/tablet -thing and it downloaded the firmware and installed it so I think it reset my phone. Still my phone doesn't ring if its locked. If I press the power button when someone is calling to me, I can see the lockscreen notification on the screen but it doesn't ring or vibrate. FFS. Any ideas guys?
E2: I guess I find a solutions. Or a temporary solution. I noticed that if I disabled the screen lock, my phone would ring and vibrate normally. So I decided to try and download "Next" lockscreen app. Guess what. When I use it, my phone works perfectly. I don't know why it stopped ringing because there wasn't any new updates from Sony but it's clearly problem in Sony's software.
Click to expand...
Click to collapse
Mustang243 said:
I still have the "silent phone" issue with this update. I have to use third party lock screen app. If I use Sony's lock pattern or pin code and use my gf's phone to call my phone: screen doesn't wake, no ringtone can be heard and no vibration. When I press power-button I can see that someone's trying to call me. Anyone else experiencing this problem? I hope you understand what I tried to say, the issue is kinda hard to explain.
Click to expand...
Click to collapse
Yeah this is a huge problem and we're not the only ones suffering from it. Now I use CM Locker because Next drained my battery. I also noticed that my phone works fine if I boot on safe-mode. Still haven't figured it out which app causes the problem. Gotta wait for the 6.0 update and hope that fixes things.
Same issue with out-of-the box...
Well, have M4 'out of the box' - meaning - no custom software installed, no customized ROM, no custom lock-screen... and well - to make the ring work back I have to restart phone every few days (as soon as realize that it's not working) - oh Sony, what should I say ....