[Q] HElp HElp HElp!!! - Optimus One, P500, V General

Hey plz tell me in detail how do i install custom rom (most stable with excellent performance) in my lg p500!!!
plz answer in detail including how do i wipe sd card and all
THnx in advandee

Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.

danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance

danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance

After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button

virusshah1997 said:
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
Click to expand...
Click to collapse
There's an option where it says "wipe" when you are in your recovery boot you should enter that category and wipe what the developer says.
Also there should be a guide of how to flash cm7 onto your phone in the thread itself
There shouldn't be any problem .

Do you mean you do not know how to enter recovery boot menu?
If so, open your terminal emulator and type
su
reboot recovery
It will reboot your phone to recovery boot.
Then wipe what the developer asks you to wipe,
make the partition on your sd card wether its ext2/3/4
Then flash it.

danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
........
Click to expand...
Click to collapse
Sorry i had cut down your post a little bit, as i was quoting it
Thanks from my side
As you made it very easy for us to understand on how to flash with custom roms

danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
Click to expand...
Click to collapse
When ever i type
su
sh /sdcard/rf.sh
It say not found

iamrajeev said:
When ever i type
su
sh /sdcard/rf.sh
It say not found
Click to expand...
Click to collapse
HeY!
Have u copied files on root of ur sd card?
(on sdcard not in any folder)
Extaract it and den copy it

it in root..i coped there & than extracted

iamrajeev said:
it in root..i coped there & than extracted
Click to expand...
Click to collapse
add me in fb.... i will teach u

id de add kar leta

virusshah1997 said:
add me in fb.... i will teach u
Click to expand...
Click to collapse
good virusshah good to see u helping enjoy

Related

Help, Reward Given

Hey there , I'm a new Lg P500 User and I am really Unclear how to flash a custom recovery mod / megatron v1 / screen lag touch fix by milk_os
About Phone
Model: LG-P500
Android Version: 2.2.2
Kernel Version: 2.6.32.9
Software Version:V10F
Rooted with Superuser using GingerBreak .
The original thread: http://forum.xda-developers.com/showthread.php?t=1044765
Also Installed with busybox from the market.
So if anyone can show me a step by step guide to how to install custom recovery mod , megatron v1 and touch screen lag fixer by milk_os. I will reward
you with $100 Singapore by PayPal.I believe in meritocracy
Links
Custom Recovery Mod:http://androidforums.com/getitnowmarketing/221388-custom-recovery-optimus-one-p500-thunderg.html
Megatron V1: http://forum.xda-developers.com/showthread.php?t=870640
Touch Screen Bug: http://forum.xda-developers.com/showthread.php?t=929941
Let the hack rage begin!
Thank You.
danialrocker said:
Hey there , I'm a new Lg P500 User and I am really Unclear how to flash a custom recovery mod / megatron v1 / screen lag touch fix by milk_os
About Phone
Model: LG-P500
Android Version: 2.2.2
Kernel Version: 2.6.32.9
Software Version:V10F
Rooted with Superuser using GingerBreak .
The original thread: http://forum.xda-developers.com/showthread.php?t=1044765
Also Installed with busybox from the market.
So if anyone can show me a step by step guide to how to install custom recovery mod , megatron v1 and touch screen lag fixer by milk_os. I will reward
you with $100 Singapore by PayPal.I believe in meritocracy
Links
Custom Recovery Mod:http://androidforums.com/getitnowmarketing/221388-custom-recovery-optimus-one-p500-thunderg.html
Megatron V1: http://forum.xda-developers.com/showthread.php?t=870640
Touch Screen Bug: http://forum.xda-developers.com/showthread.php?t=929941
Let the hack rage begin!
Thank You.
Click to expand...
Click to collapse
lol luckly i live in singapore
first of all, lets start with custom recovery
1. Download the custom recovery file from here and here
2. DO NOT rename them, and put them neatly inside the ROOT of the SD CARD (that means it should be at /sdcard/ on androids
3. next, get Terminal Emulator from the market. search it.
4. Get a nice keyboard to work on for a while. you need to type A LOT
5. get titanium backup and backup everything. menu > batch
6. reboot phone.
7. Turn on phone and go to terminal and type the following
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 755 /system/bin/flash_image
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
mount -o remount,ro -t yaffs2 /dev/block/mtdblock1 /system
flash_image recovery /sdcard/recovery-RA-GNM-thunderg-1.1.0.img
Click to expand...
Click to collapse
*there should be no error except at stage 5 there could be, but not always.
8. good. flash complete. now grab the megatron ROM and the lagfix. they both should be .zip . DONT OPEN IT.
9 put the two inside the root of SD card
10. go to terminal, write
su
*press enter*
reboot recovery
11. you should have a menu of things. go to flash zip or sth (you will know) w/ ur volume buttons
12. press menu and you will be able to choose the two zips. flash any of them first, and do the second afterwords.
13. YAY DONE
14. no need for bucks thanks. just press the thanks button down there. its free.
*PM or EMAIL ME IF YOU WANT FURTHER HELP*
*[email protected]*
Also, isnt 2.2.2 not rootable??
I think it has to be downgraded to 2.2 and then rooted..
Edit:
Sorry, My mistake.. Didnt realize 2.2.2 is rootable now..
2.2.2 it's now rootable
It says that "/system/etc/install-recovery.sh ": No such file or directory.
I'm sure that I placed both of the files on the root of my sdcard
Well, I guess the hardest part is getting the recovery. Well I share my method so, here we go.
What you need:
1. terminal emulator(download from market - free)
2. recovery installer(download here)
3. your ROM which is megatron(download here)
4. Touch-screen bug fix(download here)
5. Back-up all your SD contents to your PC.
-. optional: if your file explorer doesn't support unrar/unzipping, download one. but since you have a PC just use winrar.
when you have everything, lets start.
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back) select options:
Partition sdcard > partition SD
4. when asked choose your desired partition size then choose swap size as 0. This should format your SD card.(initially this will leave you with an ext2 partition, if you want ext3 then upgrade it to ext3 and so on using the same menu)
5. when done, press back repeatedly and reboot.
6. now, move your ROM(megatron) and the touchscreen-lag-fix files to the root of your SD card.
7. open terminal again and enter these commands
Code:
su
reboot recovery
just wait and it should bring you back to recovery.
8. in recovery, choose option:
- flash zip menu
- to avoid hiccups just toggle the signature verification
- flash zip from sdcard
- first flash your rom(megatron), when done immediately flash touchscreen-bug-fix
- press back repeatedly then reboot.
9. enjoy
danialrocker said:
It says that "/system/etc/install-recovery.sh ": No such file or directory.
I'm sure that I placed both of the files on the root of my sdcard
Click to expand...
Click to collapse
just ignore that error message. this line is only there for those with different phone models which has the mention file in the phone internal storage. so this shouldn't affect optimus one users.
@ungaze, i did your way . It took me to android system recovery .
Anyway it didnt ask me for partition sdcard. So should i just reboot my phone?
congratulations, you now have recovery. you should see some options.
press volume buttons to navigate up and down(menu button=select/ok). Choose the option:
- Partition sdcard
- Partition SD
If you want to explore your phone a bit more, you could just reboot your phone for now. Just remember, to go back to recovery you could open terminal and enter:
Code:
su
reboot recovery
or when phone is off, press and hold "power/lock button"+"home button"+"vol down button" until recovery menu shows up.
Alright , did that . My friend told me about nandroid how can i do that before i flash the other roms ?
theres a menu option "backup/restore" open it and choose "nand backup". when done, there should be a folder in your SD named "nand" copy the contents to a pc or somewhere safe as this will serve as your backup file.
Okay, i did a nandroid and ready to flash roms . Wish me well =)
Anyway why do i receive E:Bad boot message when i reboot recovery.
everyone has it. it's perfectly fine. good luck
Anyway, as I was nandroid-ing i saw this video http://www.youtube.com/watch?v=s5GWgjJT2zo in the end, it shows the guy having no reception?
edit: He didnt have it on at the first place anyway. Sorry for the inconvenience.
i didnt view the link but im guessing hes using amon_ra v1.1, the method i gave you installs amon_ra v1.2 which fixes most bugs with ext4 and nand recovery/backup
By toggl-ing signature verification do you mean to enable or disable it?
disable. this is really not necessary as the zips youre about to apply are surely signed. but in case you have problems in the future, just remember that disabling sig veryfication may fix the problem.
Thanks man, how do i donate to you?
Btw i just screw my phone. Stuck at android screen page ;(. How do i restore the nandroid backup? Should i wipe my phone first, then do nandroid restore?
Will it restore me my version 2.2.2?
When i nandroid it , my phone was on ver 2.2.2
Ungaze?
Sent from my LG-P500 using XDA Premium App
Check your inbox

Agh! what am i doing wrong!??

Hi everyone.
I'm really sick of this phone (X10 mini pro). right now no matter what i try and flash to it using xrecovery and update.zip, i reboot and always find that i'm running the same old system - like as if i've done NOTHING TO IT AT ALL!
I tried flashing this (which is what i really wanted):
http://forum.xda-developers.com/showthread.php?t=1041099
Nothing, reboots into stock.
I then tried this:
http://forum.xda-developers.com/showthread.php?t=1059361
Also no luck.
What am i doing wrong!? I download the rom, extract (System, META-INF and/or any other folder) and then i install any hotfixes by dragging and dropping/replacing files.
I then zip up the system and meta folders (plus anything else ie: Data folder) to update.zip, then install via xrecovery -- which does so fine, no warning messages -- then i CLEAR cache or format data (if instructed) and reboot.
As far as i can tell, i'm doing NOTHING wrong and it's extremely frustrating. Everytime i reboot i'm greeted with the same old setup wizard, same old theme, same stock "About Phone" details, as listed below:
Model Number:
U20i
Firmware Version:
2.1-update1
Baseband Version:
M76XX-TSNCJOLYM-53404015
Kernal Version:
2.6.29
[email protected] #1
Build Number:
2.1.1.A.0.6
What is going on???
Have you tried not renaming the zip file and flash it as it is, then flash the hotfixes next?
Maybe what you added or replaced caused the flashing to not work at all. For me when I flash a big rom it'll take about a minute. If it was flashed and you don't even see it copying files then it must have failed.
Sent from my U20i using XDA App
Choose custom zip, navigate to the zip file location in your sd card and confirm flashing it. Must work. I bet you flashed the "update.zip" which doesn't exist.
Sent from my U20i using XDA App
Thanks for the quick reply guys.
Unfortunately i've tried both these methods and i still get the same problem. (I just tried both methods again to be sure) Xrecovery just states "Copying files..." then within about a minute or so, it tells me it's "Completed"
Just for the record, i did buy this phone used (and "unlocked" to any network) would that somehow have something to do with this?
I've also tried a factory reset using the PC companion from Sony (then installing a rom) even after that i still get this problem.
Frustrating, very frustrating.
Ok, so i did this all over again:
Step 1.
Reset phone using PC Companion
Step 2
Setup Wifi using the wizard
Step 3
enable usb debugging and Unknown Sources (both under Applications)
Step 4
Connect phone via usb, transfer over Xrecovery, update.zip, etc. Then UNMOUNT SDCARD.
Root phone using S1C, install busybox during then reboot.
Step 5:
Setup marketplace account & Download (provided i get past that rediculous "downloading.." hang bug):
Busybox Installer, once downloaded, double click icon and install
Download and install Root Explorer
Step 6:
install Xrecovery manually using Root Explorer, placing it's 3 files in \system\bin
step 7:
Connect usb, transfer over update.zip, reboot and enter xrecovery
Now, guess what? XRECOVERY won't even start when i hit the back button when the SE logo appears!
One problem after another, about to give up. Really not impressed.
Do the following at your own risk
> Before you start make sure you have
- Root access
- Busy box and terminal emulator (you can get this from the market) installed
1. Download this script http://www.mediafire.com/?yw2a3r2didpb51t
2. Extract the folder called AAIS and rename it to "aais" (without the quotations)
3. Copy the aais folder to sdcard
4. Open up terminal emulator and type in the following commands
Code:
su
Click on allow when superuser dialog pops up and then type
Code:
cd sdcard/aais
Code:
sh install.sh
A list will appear, type the number which installs xrecovery and press enter
Once the phone has rebooted
1. Copy the zip of the rom which you want to install straight to the sd card (Do not rename it, extract it or do anything to it)
2. Copy the zip of the hotfixes straight to the sd card (again do not rename, extract or do anything)
3. Reboot phone, when it reaches "Sony Ericsson" press back a few times to boot into xrecovery
4. Using xrecovery do this
- Wipe cache partition
- Advanced option > wipe dalvik cache and wipe battery stats
- Go back to xrecovery main menu and then click on factory reset (full wipe)
4. Then goto install custom zip > choose custom zip from sdcard > and then choose the rom zip. Let it install
5. Once rom is installed click on choose custom zip from sdcard > and then choose the hotfix zip.
6. Once installed go back to xrecovery main menu and reboot phone
Hopefully should work
K><A said:
Do the following at your own risk
*snip*
Click to expand...
Click to collapse
Thanks for this post, exactly what i needed. Tis much appreciated.
I did what you said, word for word, and everything went smoothly. Xrecovery booted up fine and installed everything fine.
Unfortunately, this has failed to resolve the problem. I'm totally clueless as i'm sure most of you are. All i can say is it's not user error - i've not done anything wrong or missed a THING. I've really followed as you instructed word for word (as i did with previous attempts) and i still got nowhere. I've now spent all day trying to resolve this and still with no luck.
The only difference all of this ever seems to make is i'm constantly bothered by popups saying "X application has failed" etc etc now. It still just boots into the regular OS like as if nothing has happend.
Download this file, do not extract it, copy it straight to your sd card:
https://rapidshare.com/#!download|7...zip|121614|R~E38D143E052C271F51D9FBCAF24427E1
Download this file, do not extract it, copy it straight to your sd card
https://rapidshare.com/#!download|3...ight.zip|1|R~11A42E8D7D5D2FAE74791CC0D9911BE7
Go into xrecovery then
Wipe cache partition
Wipe dalvick cache
Wipe battery stats
Factory reset (full wipe)
Goto install custom zip from sd card and flash the first file
then flash the second file. Reboot phone. Hope it works.
1- Download Sony Ericsson Update Service from here -> http://www.sonyericsson.com/cws/sup...ed/updateservice/xperiax10minipro?cc=gb&lc=en
2- Install it !
3- Run it !
5- Click on "I agree all..." and then next.
4- On the home page of the software, select "X10 mini pro" and click on next !
5- Turn off your phone and remove your battery.
6- Wait 30 seconds x)
7- Plug your usb cable in your computer but not yet in your phone !
8- Replace your battery !
9- Press and hold "Back" button (the 3rd physic button) !
10- Plug your usb cable into your phone !
11- Let's SEUS doing his work !
12- When it says "Finiiiiish !!!", unplug your usb cable and boot your phone !
13- Go to Settings -> About the phone and check if your Firmware is : 2.1.1.A.0.6 !
14- Root your phone.
15- Install xRecovery with K><A method !
16- After, download the ROM you want, place it at the root of your SD card.
17- Reboot into xRecovery and choose "install a custom.zip"
18- Select the .zip of your ROM and apply
That would fix your problem if you follw my instructions
This worked
Why is that? is the version you linked an older one?
Thingamajig said:
This worked
Why is that? is the version you linked an older one?
Click to expand...
Click to collapse
I am pretty sure you didnt have right baseband and xrecovery.
Please sticky this thread mods. Its one of the best tutorials i have seen so far.
Thanks guys for helping him
Sent from my U20i using XDA Premium App
No worries
I linked the latest version.

{help}need stock kernel

I jst flashed d custom kernel and it flashed successfully......bt now my phone goes into bootloop.....whenever i start.....and when i try to install any custom rom it says incompatiable baseband found....HELP
stock kernel here
stock-kernel
taufiiqqq said:
stock kernel here
Click to expand...
Click to collapse
brother... thank you very much for thAT KERNEL
taufiiqqq said:
stock kernel here
Click to expand...
Click to collapse
anyone have the stock kernel
maybe it help you witch e10i-x10i (mini).
1. have stock android 2.1, date 10w30 and root device use SuperOneClick
1.1 optional - unlock bootloader with program msm7227 and check in "s1tool"
2. install busybox 3.3.8 use ADB console (adb install x:\*.apk), after opened in device follow the instructions busybox on the screen.
3. install rootexplorer 2.17 use ADB console
4. download and copy to microsd card CWM, open rootexplorer and copy cwm files (system) to root folder next add all permission system/bin/chargemon file.
5. power off and power on device with press 5-30 times back button, cwm loaded -> mounts and storage -> format system - format data - format cache if cwm say "cwm format, restore cwm" press no >> and yes. power off device.
6. flash custom kernel nAa_0.6 with cwm (flashtool on java) reload in cwm
7. download custom rom 4.1.2_jbmp_mini copy to microsd card

[Q] Phone frozen on overclocking - help

hi folks,
I installed a new Kernel on my Samsung Galaxy S plus. Its on CyanogenMod 10.1. I overclocked the default 1.4 GHz processor to 1.8 GHz. Mistakenly i set the options on the app as set on boot. Now after booting its freezing up.
I can boot in Recovery mode. Any idea how to push the stock kernel file to the SD card?
I don't have any backup ROMs or kernels on the phone. Neither is the Debugging mode on.
I don't want to do a factory reset now. Please help.
Using ADB i tried the push option
K:\ADB>adb.exe push Stock_Kernel.zip /sdcard/
this also showed that the file was pushed
1877 KB/s (3665845 bytes in 1.906s)
but there is no zip file on the sdcard
Is there anything i can do with Eclipse ?
Regards,
Anoop
[SOLVED] Phone freeze on Kernel overclocking
hi all,
This was resolved by Christopher83 whose Kernel i was testing.
Resolution steps:
1. Created a folder called ADB in my PC's K: drive
2. Copied these three files into that folder - 1. adb.exe, 2. AdbWinApi.dll and 3. AdbWinUsbApi.dll
3. Copied the stock kernel zip file there too
4. Rebooted the phone in Recovery mode
5. Connected the phone to PC(Windows) with USB cable once the Recovery screen came up
6. Waited till the two drives were seen in the Windows drive list
7. Executed the command window and typed the below in it after changing the directory to the ADB one
K:\ADB>adb.exe shell mount -t vfat -o rw /dev/block/mmcblk0p28 /sdcard
K:\ADB>adb.exe shell ls -l /sdcard/ (to see the list of files)
K:\ADB>adb.exe push Stock_Kernel.zip /sdcard/
K:\ADB>adb.exe shell ls -l /sdcard/ (again to see the list of files and to confirm that the stock zip was copied)​8. Disconnected the USB
(please try to do these steps a bit faster, my Recovery screen blanked out after 2 or 3 minutes of inactivity)
9. In the Recovery mode i did the following -
a) Install zip from sdcard
b)Choose zip file and then selected the stock kernel zip and flashed it​10. Wiped cache and Dalvik and fixed permission
11. Rebooted and all was fine like before (after all the apps were automatically fixed)
thanks very much, Christopher
You're welcome!
Thank you too for your patience.
Probably you are using a Recovery that is not an ADC Team recovery (this is why you have a shutdown after 2-3 minutes)... provide to update it with the Fixed ones we published (CWM or TWRP)... http://forum.xda-developers.com/showthread.php?t=2463347
In general if an OC kernel has been set to apply the OC/UV during boot (and these settings are not stable for your hardware), the easy way is to switch on the phone in recovery and flash the stock kernel that is NOT OC/UV... in this way the phone can start booting with standard frequencies/voltages... after booting, go in Performance settings and set newly the frequencies and set also the Set On Boot switch...
If you used an external app to set the OC parameters, with the stock kernel, open it and remove the Set On Boot option... in this way there is no stored values anymore... than you can reinstall OC kernel...
If you reinstall the OC kernel, I expect that the standard settings will be taken and used... an anyway be carefully with the settings... before set them on boot, be sure they do not give problems, to avoid a new booting freeze... remember that all the phones are different, so one can accept OC and UV, another not... that's life!!
Regards
Install Touch version of TWRP
smeroni68 said:
Probably you are using a Recovery that is not an ADC Team recovery (this is why you have a shutdown after 2-3 minutes)... provide to update it with the Fixed ones we published (CWM or TWRP)... http://forum.xda-developers.com/showthread.php?t=2463347
Regards
Click to expand...
Click to collapse
Smeroni, thanks for the advise. I'd like to install the touch TWRP Recovery version.
Currently i'm now on cwm6032-Build2-ariesve-alireza7991.zip.
Can i safely follow the same process as mentioned in your post, to install TWRP ?
a) Install TWRP Recovery to SD card
b) Reboot in Recovery mode
c) Soft reboot to recovery mode again
d) Select install from SD Card
e) Select TWRP file and install
f) Reboot normally
thanks much!
smeroni68 said:
anoopgkris said:
hi Smeroni, i dont know if you got my message when i quoted you on my freeze issue.
Wanted help in installing TWRP. Please see my message below.
Smeroni, thanks for the advise. I'd like to install the touch TWRP Recovery version.
Currently i'm now on cwm6032-Build2-ariesve-alireza7991.zip.
Can i safely follow the same process as mentioned in your post, to install TWRP ?
a) Install TWRP Recovery to SD card
b) Reboot in Recovery mode
c) Soft reboot to recovery mode again
d) Select install from SD Card
e) Select TWRP file and install
f) Reboot normally
thanks much!
Click to expand...
Click to collapse
Hi,
sorry but I lost your message.
Yes the procedure is nearly correct... but:
a) Copy the TWRP Recovery zip file to SD card
b) Reboot in Recovery mode (from the rom menu)
c) Soft reboot to recovery mode again (just to be sure nothing strange will happen)
d) Select install from SD Card
e) Select TWRP file and install
f) Reboot to recovery and check the new one
g) Reboot to system...
I hope I understood your PM... if not write me back.
Regards
Click to expand...
Click to collapse
Smeroni, thanks for the advise!! I'm posting it here.
Installed like a charm!
Regards,
Anoop

[Q] How to root Moto E (updated to 4.4.4) ?

I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Thank You DAVI FELICANO and deej_roamer for their help. I have now successfully rooted my phone. If someone else has a problem, go to Page 2 for the solution.
You can use the defalt method, dont need to change anything.
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
DAVI FELICIANO said:
You can use the defalt method, dont need to change anything.
Click to expand...
Click to collapse
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
I know friend. I was talking about games like asphalt 8 and dead trigger which have data of size 1.5 gb because of which I wanted to root my phone. Thank you for the advice.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
5zan said:
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
If you read my post correctly then that's what I have written.
5zan said:
You can install only one gphone and due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
I know friend. Thats why in this post I asked how to root the phone and not how to install games on sd card. Thanks.
Harsh862 said:
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
Click to expand...
Click to collapse
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
DAVI FELICIANO said:
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
Click to expand...
Click to collapse
Ok. Thank you friend. I will reply if I face any problem. Thank you again.
Any idea of rooting the device without unlocking BL...thnx in advance
Sent from my XT1022 using XDA Premium 4 mobile app
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Harsh862 said:
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Click to expand...
Click to collapse
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Urgent help needed
Harsh862 said:
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Click to expand...
Click to collapse
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
problem successfully resolved
Harsh862 said:
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Click to expand...
Click to collapse
Thanks harsh862....it really helped a lot..,. Really thanks
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
Is your recovery.img placed in the "C:\Program Files (x86)\Minimal ADB and Fastboot"?
It need to placed in it or you'll get an error.
Boot loader is LOCKED !! cannot be unlocked !! so no root for me ?

Categories

Resources