Related
Hello,
I have a Mini Pro and succesfully installed CyanogenMod6-v3.1.
Then I put qwerty.kl form german.zip via RootExplorer to /system/usr/keylayout.
Since then I do not have these three buttons: menu, home, back, on/off.
They are completly dead.
So I thought to replace qwerty.kl with the original one found in update.zip.
But this does not work either...
Do you have an Idea?
Thank you
Tobias
(I have less than 10 posts, so I have to post here, sorry)
EDIT: I did a re-flash via xrecovery and now it works again.
But how can I change to the german keyboard layout?
Keyboard
Sorry that i write here, but i am not able to write in the right discussion
the german keyboard works so far fine, but the number "3" is not on the right place.
In the german keyboard the three is over the y and not over the z ( by pressing the green quader.
the problem is in this file qwerty.kcm in the last line y3 yy it must changed to z 3 zz i think
The second :
the symbol button just aktivate the numbers over the character and not the symbols or Ä,Ü,Ö.
thanks for your powerful work
I do not see that these problems are related.
It would be better to start a new thread for you...
How can I install the german keyboard layout?
Thank you
go to the 1st page of the cyanogen mod download german keyboard and instal it with recovery tool
the number 3 is above the y and not above the z. This bug will be fixed later
Thank you.
I mark this as solved as the bug with number 3 is already known.
open qwerty.kl with root explorer (with write permissions) and a text editor. You will be able to change evry single key.
bye
Disclaimer
I am not responsible for any damage ... the regular stuff. So read instructions and you'll be fine
Click to expand...
Click to collapse
(credits go to HerrKuk) for keyprint.xml info
IMPORTANT:
Goto anywhere you need to input text. push long on the input box until the windows input methods appears chose Standardinput and now it will work. If you don't want to use the standard input method and want to use android one also flash the your hardware keyboard from the bottom this will enable you to use both keyboard input methods!. reselect your language. Do the same for Bopomofo Chinese Input method(optional download)
CM7 SE Keyboard update!!!
Hotfix for Word selection in dropdown (when using touchkeyboard) HOTFIX
Instructions
Download CM7 SE Keyboard
Download from CM6 your language
Download CM7 Hardware keyboard layout
Now install CM7 Keyboard
Install CM7 Hardware Keyboard
Install CM6 language
reboot
CM6 v3.3 and newer also for CM7 | Sony Ericsson original Keyboard
One Click on the thank you button would make my day!
AZERTY (French)
Spanish KeyboardSpanish Keyboard
CYRILLIC
LATIN-ON-CYRILLIC
GREEK
LATIN-ON-GREEK
LATIN-ON-ARABIC
LATIN-ON-ARABIC-AZERTY
LATIN-ON-BOPOMOFO
LATIN-ON-BOPOMOFOChinese Input Method for Bopomofo
LATIN-ON-HEBREW
LATIN_PINYIN
LATIN-ON-THAI
QWERTY-PT|BR)
QWERTY-EN | PT (ENGLISH) (Brazilian/Portuguese
QWERTY-NO-DK (Norwegian| Danish)
QWERTY-SE-FI (Swedish|Finnland)
QWERTZ (German)
CM6 3.0/3.1/3.2/3.2.1 Sony Ericsson original Keyboard
One Click on the thank you button would make my day!
AZERTY (French)
CYRILLIC
LATIN-ON-CYRILLIC
GREEK
LATIN-ON-GREEK
LATIN-ON-ARABIC
LATIN-ON-ARABIC-AZERTY
LATIN-ON-BOPOMOFO
LATIN-ON-HEBREW
LATIN_PINYIN
LATIN-ON-THAI
QWERTY-PT|BR)
QWERTY-EN | PT (ENGLISH) (Brazilian/Portuguese
QWERTY-NO-DK (Norwegian| Danish)
QWERTY-SE-FI (Swedish|Finnland)
QWERTZ (German)
Black Theme
credits to nobodyatall
Black Theme
Download your Hardware Layout and then select your language.
AGAIN OPEN i.e. SMS push long on the text input box until a menu appears, select choose inputmethod, choose standardinput, afterwards chose your language AGAIN! even if already the right one is selected
CM7 Keyboard Layout if using Android Keyboard input Method
German
http://www.mediafire.com/?pspwnzgb5byaxaj
Fully working Hardware Keyboard without german specific letters mapped on blue/sym button
http://www.mediafire.com/?fcno0917d13563l
Additional to first german layout also german specific letters mapper like "ä","ö", etc.
French
thanks KeitaroBaka
http://www.mediafire.com/?kde5dnyp6adph7z
French Keyboard layout with added é á etc ...
Swedish
thanks to owain94
http://21da275e.linkbucks.com/
Russian
thanks to owain94
http://8cef7e35.linkbucks.com/
Danish/Norwegian
thanks XabdullahX
http://c2ba60e3.linkbucks.com/
Greece
thanks owain94
http://a91f95d7.linkbucks.com/
Hungarian
thanks Thedy01
http://0efeda72.linkbucks.com/
Instructions
Place zip file on root of sdcard
Boot into xrecovery
goto flash custom zip
look for your zip file
click yes
reboot the phone
As for many of you having troubles with "shift" key not working. Touch the text input window and hold your finger on it until a menu appears, chose input methods, choose android keyboard and NOT the HTC one I don't know why but "shift" key will work again!
As I got a lot of requests regarding different hardware keyboards I'll like to start a thread in order I can build you guys custom keyboard layouts for your froyo or gigglebread roms. My goal is it to have all languages sooner or later updated and organized in this thread.
I need to the following from you guys so we can make the hardware keyboard work.
your qwerty.kcm.bin and your qwerty.kl from your old Sony Ericsson Firmware (/system/usr/) i need the entire folder with keyboard-config, keyboard-chars etc..
List your buttons and which button should have which character on blue/sym button and if you need capital letters as well which key should appear on blue/sym and shift button press
List you special signs, like underscore, plus,minus, etc .. even if you need a key frequently which is not on the default keyboard layout from sony we can still place it on a different button suitable for you
and last but not least any special requests, like numbers or so in the wrong place.
If you want to have an exact copy of your hardware keyboard as it is on your device (like the blue letters and number) please post a picture
As for many of you having troubles with "shift" key not working. Touch the text input window and hold you finger on it until a menu appears, choose android keyboard and NOT the HTC one I don't know why but "shift" key will work again!
I'll place all the keyboards in the second post for you once they are finished.
Change Log
v0.9 Hotfix CM7 less buggy now. only bug besides scroll down on sym menu is white color of text and list when selecting input language
v0.8 finally CM7 compatible but a bit more buggy than under CM6
v0.7 updated Spanish and SE Chinese Input Method for bopomofo (Its a different one than SE Standard Input Method)
v0.6 updated CM7 keyboards.
v0.5 updated all available languages!
v0.4 fixed bug regarding touch screen keyboard
v0.3 another fix for crashing
v0.2 fixed bugs in Sony keyboard so no workaround needed except above instructions
v0.1 new Sony Ericsson Keyboard
Known Bugs:
Sony Erricsson
SYM Menu sometimes does not respond. (workaround chose input method android, choose inputmethod standardinput again)
[in SYM Menü "Enter" does not work!] fixed in CM7 - still persistant in black theme
Black Theme might cause a force close in touch keyboard when trying to get dropdown menu
hi, i just want the original x10 mini pro Portuguese From Portugal(PT-PT) thanks
well as i do not speak pourtuguese do you have the original qwety.kcm.bin or something like that? or button mapping? thanks! (its in the list in 1 thread what i need)
you know what would be best just post a picture of your hardware keyboard. and i'll make the files for you
slade 87.
Good stuff man.
its guys like you who makes XDA what it is.
keep up the good work
Good thread, . I have one suggestion thought, I suggest you move all the keyboard layout submitted to the first post with thanks to the finder/inventor. That way people will easily find what they need.
yes of course i'll give the credit to the people who found it. Once there is more keyboard i'll start using external links, so we can divide languages from each other and also make it easier to give credit.
how do you get the qwerty.kcm.bin and qwerty.kl files? do u need to use root explorer or what? im new at this, sorry
hey, is it possible to put in german keyboard the old function from the sym/aü button. so if u press this button u will open the window, with smilies and special symbols?
luz1fer said:
hey, is it possible to put in german keyboard the old function from the sym/aü button. so if u press this button u will open the window, with smilies and special symbols?
Click to expand...
Click to collapse
I wonder the same about my Norwegian phone...
When I click the Sym button, it happends the same as on the blue button ...
It should be smileys and stuff there like , :-( , , , :O etc...
Thanks!
slade87 you got permission to post my files from cm topics here
i will delete the links from my post and i will link to this posted i think this is more up to date them mine are
as of now i don't think this is possible but we can map new letters to buttons so for example old german layout was:
sym button + o would make an "ö"
now i did the following blue/sym button + o makes "ö"
but not with touch input but with the hardware keyboard. so the most frequent letters we can reasign to a combo of blue/sym button and work with that.
owain thanks I'll update this thread day by day and slowly merge your existing keyboards into this thread. I will upload new version to mediafire as well and keep your old links if thats ok with you.
the why im asking that is, in connectbot for example i must use > or < but i cant find these symbols on the keyboard, coz these were under the menu witch opend with sym/aö ;>
check first post i got it working with the se menu!
slade87 said:
well as i do not speak pourtuguese do you have the original qwety.kcm.bin or something like that? or button mapping? thanks! (its in the list in 1 thread what i need)
you know what would be best just post a picture of your hardware keyboard. and i'll make the files for you
Click to expand...
Click to collapse
what you preffer?
the qwerty.kcm...? or the picture?
if you preffer the qwerty.kcm... please tell me how to get that for you...(im new in this android scene.. i preffer symbian s60 v5 modding)
i just need the keyboard becouz im my language(Portuguese from portugal) we have "Ç" and we use ´, `, ~ and ^ in some letters like "é"(is) in "Não"(this = no) and in "A" in some cases "à" or "á" and i need the < and > for my smiles :b
please check the first post and follow the instructions of the sonyerricon.zip (first link) you should have all your keys back.
okay with the sonyericsson.zip i got the symbols back on sym/äo but it seems instable with the sms/mms programm of cm6 3.2.1 coz i get forced closes Oo
did you reselect the language?
i don't know if it helps you but use xrecovery and download one of the other posted keyboard layouts, install it and then try it again. after i did this i had no more force closes. but in rare occassions the symbol menu did not work (touch did not respond) but it didnt force close i could still write my text just couldn't select an icon (and could get the menu away with pushing sym button again).
uey, i tried it with the french one, at the beginning no sym/aö symbole table, but than i hold the finger on the input and switch from standartinput to Androidinput, closed and do it again but now back to Standart input and it works. strange things are goin on here ;>
thnx for ur help and work
i am glad it worked!
I updated the link on the first post. this should work now without luzifers work around.
Hi everybody, i've googled around for this problem withoud finding any solution.
How can i edit the files in system/usr/ to make the keyboard like the stock one?
Examples:
if i press the blue button ONCE it should write ONE blue character only. instead it messe everything up and i have to press it several times to get the letters working.
the sym button doesn't work in either way (accented letters if pressed simultaneously with the letter or symbols menu if pressed alone).
etc..
i found this (http://forum.xda-developers.com/showthread.php?t=1113863), but it didn't help, and i can't post in that thread to ask for help.
i've seen that italian language file is present in /system/usr/keyboard-config/languages, but how can i make the phone use ita.xml instead of what's using now?
EDIT: i've seen now that i've started the thread in the wrong browser tab, i wonder if a mod may move this to Q&A. i'm sorry
EDIT2: problem solved, i had to change the option in the settings menu. strange that 3 different keyboard input methods were activated, it makes no sense to me.
i'd recommend to stiky a warnig to this fact so no one will be looking for a solution to a problem that doesn't exist
swedish hardware keyboard x10 mini pro
Noob here,
CynaNoComb 1.4 installed on x10 mini pro, can't get the HW keyboard to work with se-fi, tried both http://forum.xda-developers.com/showthread.php?t=982341 (3.3) and other suggested solutions.
Believe 1.3 had an app "cmmini ROM-something", which worked fine then,
Stuck here, thanks for any help, (and sorry if posting inapropriate, haven't fully figured out the structure of xda.)
regards,
Edit solved:
downl es file explorer
start esfe go to manage / security check both root and /sys as wr
edit /system/usr/keybord/keyprint.xml, change latin layout to qwerty-se-fi
save and reboot
exhale.
i have doubts i could not take of reading for HOURS and searching and reading... so here i am to try any good soul to answer me:
1 - how do i use SEUS to verify my firmware?????? Can u explain me pass to pass?
2 - i have froyobread CM6 in my mini pro... Kfix solved the leds problems in HKeyboard, BUT.... i can make it work in my language...
I am Brazilian, my language is Portuguese-BR. I tried to use the Mini Rom Manager to change the hardware keyboard layout but querty-br didn´t work... and it has no other language (i think so...) i can use as i need sym/ä and ç in my language...
can somebofy help me to solve it explaining me a pass to pass?
PLEASE?????????
3 - my virtual keyboard stops when i try to scroll it untill the end using the sym... some tip???
4 - how do i install java in the mini pro?
no answers
ok..... so as i have no answers... i continued trying to get info in the net...
i tried GingerDX, FroyoBread and now i am using CM7Pro for mini pro...
what can i say?????????
well... Froyobread i had no hardware keyboard working in portuguese brazil PT-BR...
i tryed Rom Manager but i got nothing working in the HK
i need to try another tips, but as i am a newbie i waste A LOT OF TIME to understand what to do with the files people post here.
GingerDX it´s awsome but i got no bluetooth working, no HK and no lED light in the HK, and Rom Manager didn´t work in the ROM... i got info about how to make Rom Manager work, but not fully and did not try as my bluetooth didn´t work and i got nothing about how to fix it...
i tried to reinstall the ROM in a fresh base, i tryied to wip it and restart several times... and GingerDX had bug for me in the touch screen and buttons i could not enter the ROM when the LCD turned off. And the Sym/àü key stoped work if i´d scroll it untill the end down. Yes,,, there was tip about how to fix it... but for me had so much problems i tried another ROM
Now i have Cyanogem miniCM7Pro V4. For now the only problem it´s the HK... i am AGAIN trying to find a solution.... everything else it´s working for now... but i need to do more tests.
Some more bugs... please guys.... help!
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
3 - no GPS
4 - no internet connection but the wifi is on !!!!
azhhael said:
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
Click to expand...
Click to collapse
Rom manager
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
Me too
3 - no GPS
Me too
4 - no internet connection but the wifi is on !!!!
And me too
so........... trying again
well... with so much problems i tried all again... what i am getting now:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know how.... does anybody know how???? Can give me a help????
more doubts..... help again
i am trying to get my old file as tells here:
you can browse an xrecovery file you already have and find the keyprint.xml , or find the keyprint.xml from an other rom you installed in /system/usr/keyboard-config and copy it to the sd card
with root explorer or any file manager that can explore your root
go to /system/usr/keyboard-config delete the existing keyprint.xml and paste the one on sd card
give the right permisions [x] [x] [ ]
____________________ [x] [ ] [ ]
___________________ [x] [ ] [ ]
(remember to mount write before you do anything on system)
reboot your phone
but i can´t cause it tells can´t find the file in CWM
i have ".img" files as backup done when i was with 2.1 android from SE.... i need to get the original HK file to test the tip... but i have no idea about how to get this now...
PLEASE HEEEEEEEEEEEELP
you sir, are a dedicated problem solver
i've added my stock rom keyprint.xml for you, hope that helps you
unzip that to sdcard and then just copy it over to the right system folder using root eplorer and setting the right permissions
---
As for the screen borders getting no touch input, the only cm7 version that wasn't the case with was minicm7-v14,5 by slade.
all other versions suffer from it
The symbol menu crashing when scrolling is a common froyo/gingerbread issue and can partly be solved with a workaround
if you go to cm settings > user interface and enable overscrolling and set it to bounce, the symbols menu in h/w keyboard won't freeze anymore. Except that doesn't work on the symbols menu in soft keyboard.
goodluck!
Hello Anderson... in my last post i told what i did that helped me to get the most problems solved in the ROM.... i´ll repost it here:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know
any doubt about it ask me, now i learned a lot!!!!!! auehuaehauehuaeh
and if you think i could help... and if the button appears to you, thank me in my post... :-D
cheers
Oh .... thak u so much for you good help, and for the file.
I tried to do all with the file you sent me, but i got no working HK in PT-BR yet....
this post tell what querty file for the correct language in the HK but i didn´t understand how to install the language...
http://forum.xda-developers.com/showthread.php?t=982341
can you help me? Maybe you may know how...
oh god, i think i did something really bad!!!!!!!!!!!
more questions... i found nothing explaning it in the forum... can somebody help?
I am with GingerDX v5 ROM
1 - when i plug my phone to PC, so PC Companion asks for "choose between charging, connecting and etc..." but there is not the option in the phone screen to do it... what do i have to do to connect???
2 - i had sony android 2.1 and i did a backup using xRecovery so i could install another ROM ... so... after that i formated my sdcard... lost all... but before it i did a backup. So i have inside this backup a folder called xRecovery > backup > 2011-08-02.02.29.25 >
nandroid.md5
cache.img
data.img
system.img
so, my question is: "is there a way i can recover my old android 2.1 with this files??? Or did i lost all...???
and... how can i open this "files" so i can get HK files from old 2.1 i had????
I knoe i have a lot of questions, but i can help too... i think so...
hello guys... i am really ansioous for your help about my last questions.
But for now let me tell what i got.
I Unzipped GingerDX v5 and unzipped pt-br files.... so, i copied these files to Ginger ROM and deleted the original ones. So, i zipped GingerDX again.
So, i wiped all in CWM and reinstalled GingerDx using my zip.
No, it´s all working as before, but the difference is that i have my HK almost ok. Now i have the right keys unless for the SYM key i can´t do it working yet.
Please, do u guys have any ideas?
And need the "popup bar" that appears in android 2.1 when u use the HK... that bar where we can change language and see is the we r using the numbers, or "big letters (?)" or "small letters (? oh... sorry for the bad english)".
I saw something about it in the GingerDX v6 thread but i didn´t understood nothing cause they talk to people who knows about the programing... it´s not a pass to pass... so, can some good soul help me about all these problems????
PLEASE....
I´ll attach here the file i used to replace HK files in GingerDX v5... maybe it can help if somebody can have a look at it about the SYM key and the popup bar...
hope u give me a help guys , i have nobody to ask for....
Can anybody help?
Hello XDA guys... i know you r busy guys, and really intelligent ones... cause waw.... i´d really like to know about programming as u.... but well, everybody has a talent and the mine is animation in computer graphics... if i can help you anyway about it... let me know... but
I need help!!!!!!!
please... guys, i believe my problems can help not just me, but more people here as i could see... and
Hi, I kinda solved the sym key by accident and i can't really tell how i did it but actually I just selected the keyboard i needed in mini rom manager and then i went into settings/keyboard and I unchecked all boxes.
After that I rebooted and I checked the boxes back and it worked. It may sound weird but the sym key works on my phone. I'm using paul's rom V4+hotfix.
Hope this will help you.
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
waw... weird...
Carpe-Dimi said:
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
Click to expand...
Click to collapse
it´s really weird that issue about sym key you did, Chucklechivers. hehehe
But... i am trying to reproduce that "issue" auehaueh.
And Carpe-Dimi...
I just got a little problem, or two:
1 -i use Ginger DX v005 ROM, i installed Mini Rom Manager v.5.2 from Slade but when i try to change the HK layout it tells me it´s not compatible with my device. So i tried to change the build.prop file as people tell here in XDA so MRM should be compatible... ok, that´s working. But when i try to change the language of my HK nothing happens after reboot... no changes. And a lot of features of MRM can´t work properly
2 - when i access the language and keyboard setting to set default input, it doesn´t exist in my ROM... i just have 2 keyboard in the Ginger DX v005: HTC and Android... no other.
About the overscrolling... can i set elastic overscroll and bright? or does it just works only in simple elastic mode?
so... any ideas, guys??? i am still searching for answers... if i thind any... i´ll put it here...
it might be that MRM can't change keyboard cause of the new keyprint.xml file u've used, but I'm not certain about that. and not all functions of MRM work on all phones and roms either.
í've added an apk for the standard input. using root explorer copy that to system/app (on your phone, remember to set r/w) and give it the permissions rw-r--r-- (read+write for owner, just read for the other two)
reboot and u should be able to select default input from the settings menu.
bounce and glow will work as well
Hi, this is FreeXperia KeyboardChanger for X10 Mini Pro
build from CM Sourced by FreeXperia Team (Bina4y)
Important
Read how to use before you used it, i'm not responsible if you brick your phone
What been mod:
change all assets for mimmi device
edit java
edit layout
edit kcm.bin file
Menu:
arabic
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol)
azerty
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
cyrillic
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
greek
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
hebrew
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
latin-on-arabic
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
latin-on-arabic-azerty
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
latin-on-bopomofo thanks to ssdog27 for file and test
default input : work ,confirm
other keyboard : work ,confirm
latin-on-cyrillic
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
latin-on-greek
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
latin-on-hebrew
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
latin-on-korean
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
latin-on-pinyin
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
latin-on-thai
default input : work ,but need to confirm
other keyboard : still not work (unknown symbol), use qwerty-en kcm
qwerty-br
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
qwerty-en
default input : work ,confirm
other keyboard : work ,confirm
qwerty-no-dk
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
qwerty-se-fi
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
qwertz
default input : work ,but need to confirm
other keyboard : work ,but need to confirm
remark : what input methode do you pick
default input : SEMC Keyboard app
other keyboard : other keyboard app (HTC_IME , android keyboard, etc)
This apk will change your keyprint.xml, mimmi_keypad.kcm.bin, qwerty.kcm.bin, mimmi_keypad.kl, and qwerty.kl
Requirements :
Root
Gingerbread Rom or latest
Have SEMC Keyboard app
How to install :
install as usually apk (v2.0.1) --> need test first
How to use :
Set Default Input as your input method (it's important or your brick your phone) thanks to skifyr123
Open app
Allow root access
Choose your Hardware Keyboard Layout
Push Save and Reboot button
If first try not work set your layout again (it should work after second try)
Note :
If you find wrong layout please report back
If your Harware Keyboard Layout still not include send me picture of your keyboard
Keyboard stiil not fix will be fix after i know what symbol they use on hex
For tester please report when you use another keyboard app the layout is work or not (cos that part i been mod, default input is use SEMC layout)
I'm not dev so if you have some idea or something to improve this app i will be happy
Don't install.
MiniCM7 2.3.7 deodexed.
App not installed. MiniCM7 from nAa + nAa kernel
kraven said:
App not installed. MiniCM7 from nAa + nAa kernel
Click to expand...
Click to collapse
This no installed app
push to system/app folder then give right permission
Felimenta97 said:
Don't install.
MiniCM7 2.3.7 deodexed.
Click to expand...
Click to collapse
lol so your ROm can't install any app, cos other app is not deodexes ??
madbulls said:
This no installed app
push to system/app folder then give right permission
Click to expand...
Click to collapse
My ROM: nAa MiniCM7-2.1.7 + nAa 08 kernel
This is my walkthrough:
1. Pushed
2. Changed permissions
3. Started App
4. Select QWERTY-BR (for spanish keyboard)
5. The app restarted phone
The Result: keyboard not working, any push, any key... now I'm restoring from a backup...
Thanks for this, it worked great. You should maybe include a better "how to".
What I did:
1. Copied the .apk to /system/app and changed permissions to rw-r--r--
2. Rebooted and sat the input method to "default", then opened the app and chose my language. Save, the phone will reboot.
3. Profit.
(latest nAa MiniCM7-2.1.7 + nAa kernel)
So I can confirm it work with "16. qwerty-no-dk"
Really, totally don't work for Azerty.
After select Azerty and reboot, All buttons don't work, even turn off button. I have to remove battery to can restart and do restoration in CWM.
So for this moment, need big debugging.
If somebody want try, do backup before
Hi Madbulls,
I try it and it works fine qwerty-br for me!
Maybe for next version you can try to initialize the one already used... ;-)
PS: I use the one you sent me by PM.
Thanks
New version 2.0.1
change log:
make clean java (there is 2 java from last version )
try make installed apk
add more permisssion
make more time for save and reboot, so app have time to copy file( i hope this will be solve last version bug)
download at first post
this version need to test first, i hope someone to tester it
Hi, hope my report will help you. At this state the app is not working at all (at least for me).
Phone Model: U20i
ROM/kernel: MiniCM7 / nAa
Language tested: latin-on-greek
Worked: No
Bugs:
Phone got very laggy
I used the default app mesenger but whenever I pressed a key to write a message the app closed. no message for FC though, it just hung and closed itself.
menu and power button stopped working. Once the phone locks itself you can't unlock it by pressing menu or power button. You have to slide the keyboard in order to unlock. And of course you have to power it off unplugging the battery.
In the end, I did a restore. I didn't have the time to get a logcat.
New version (v2.0.2)
change log:
edit java command , if you not success change your layout your phone not brick but still use previous layout
Try again if still new layout not work
I was tested with full wipe so is must work now (i hope )
download at first post
Very good work
Works on Xperia X10 Mini Pro with hardware- and onscreen keyboard (qwertz).
Move the apk file over Root Explorer to /system/app and give the following
permissions:
X X O
X O O
X O O
Install the app out of the Root Explorer and open the app ...
Click on what you need (in my case qwertz) and click on
"Save & reboot your phone".
That's all
madbulls said:
change log:
edit java command , if you not success change your layout your phone not brick but still use previous layout
Try again if still new layout not work
I was tested with full wipe so is must work now (i hope )
download at first post
Click to expand...
Click to collapse
Hi Madbulls,
I tested last version in CM9 ICS Rom by Paul-xxx with layout qwerty-br and the layout is not updated correctly!
Thanks
DanielFran said:
Hi Madbulls,
I tested last version in CM9 ICS Rom by Paul-xxx with layout qwerty-br and the layout is not updated correctly!
Thanks
Click to expand...
Click to collapse
Try this for ics rom, its stiil beta but its work.
note: its system app, not installed app
Installed app by copying to /system/app, change permissions, install app...
Selected qwerty br for spanish keyboard, reboot, all ok.
Using MiniCM7 2.2.0.
Now the problems: impossible to write "ç" "Ç" characters with hardware keyboard. Instead of "ç" or "Ç" it writes ","
The "," key writes " ' "
All other keys are working fine.
Greetings.
cybdani said:
Installed app by copying to /system/app, change permissions, install app...
Selected qwerty br for spanish keyboard, reboot, all ok.
Using MiniCM7 2.2.0.
Now the problems: impossible to write "ç" "Ç" characters with hardware keyboard. Instead of "ç" or "Ç" it writes ","
The "," key writes " ' "
All other keys are working fine.
Greetings.
Click to expand...
Click to collapse
This version is only for Ics! Try keyboardChanger in 1st postal for Gb.
Sent from my U20i using xda premium
DanielFran said:
This version is only for Ics! Try keyboardChanger in 1st postal for Gb.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
I've installed version from first post (gb), not for ics.
Here is a picture:
For QWERT-BR layout i use mini rom manager, it´s quite simple to use and works.
I would like to know if it´s possible to change the layout for example of the swifkey x, there is a option for QWERTY but not for QWERTY-BR, and there some buttons that does not work.
It will be useful if somebody tell me where this layouts are stored, i believe that is not in the default location SYSTEM/USR/KEYBOARD-CONFG/LAYOUTS.
Best regards
I think I shouldnt do this but in x10 mini general I have a thread too with flashable keyboard layouts,azerty,qwertz and latin-on-greek proven testing.i just post this here for the people having problems.oh,also in order for them to work (layout) you will need sony ericsson default input
Sent from my U20i using XDA