First off, i have an x10a on att, rooted, the whole deal. Wehn i tried to install xRecovery to flash roms, the automatic didnt work, got an error. Then i tried the manual install, still didnt work. I tried using Bin4ry's flashtool xRecovery installation, it said it worked, then i booted into recovery from flashtool, and there was no recovery or anything starting up. i really want to flash roms, but i NEED xRecovery and i am out of options.
Just checking but you installed busybox right?
Sent from my X10i TripNMiUI using XDA App
Galaxynova88 said:
First off, i have an x10a on att, rooted, the whole deal. Wehn i tried to install xRecovery to flash roms, the automatic didnt work, got an error. Then i tried the manual install, still didnt work. I tried using Bin4ry's flashtool xRecovery installation, it said it worked, then i booted into recovery from flashtool, and there was no recovery or anything starting up. i really want to flash roms, but i NEED xRecovery and i am out of options.
Click to expand...
Click to collapse
Did you know how to get into xrecovery? If you don't, just keep pressing the back button on phone when you see the sony ericsson white lettering when you turn the phone on.
yes, i do have busybox, and i do know how to get into xrecovery, it just dosent pop up. i have busybox from the market installed.
Galaxynova88 said:
yes, i do have busybox, and i do know how to get into xrecovery, it just dosent pop up. i have busybox from the market installed.
Click to expand...
Click to collapse
Did you go into the busybox installer itself on the phone and pick the latest version with the busybox app?
I have the stable one, not the newest one.
Sent from my X10a using XDA App
try the newest busy box if you can't get it to work.
Sent from XDA Premium from my X10a rooted running 2.2.1 Pure CM Rom from kxhawkins
Okay, if that dosent work, is there any alt. to xrecovery? Or easier way to get it to work?
Sent from my X10a using XDA App
Galaxynova88 said:
Okay, if that dosent work, is there any alt. to xrecovery? Or easier way to get it to work?
Sent from my X10a using XDA App
Click to expand...
Click to collapse
I had the same problem before when I updated my busybox to the wrong version. What I did was using the latest flash tool 0.2.9.1 to reinstall xrecovery. These are the steps.
1. Connect your phone to the pc.
2. Run flashtool 0.2.9.1
3. A pop up window will come up and select x10.
4. Select Ask Root Permission on the flashtool and select Allow when SU app appears on your phone.
5. Then select xrecovery on the flashtool and it will install xrecovery back for you.
6. Reboot the phone and try press back button a few times when you see SE logo appears.
Hope this will help you.
Do the manual install again and make sure you 'mount r/w' before pasting the 3 files in system>bin and theres no way it goes wrong. Do not install busybox as it is included with the XRecovery files. Make sure to copy the chargemon, busybox and XRecovery.tar files which you can get by extracting them from the installer apk.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Manually installed it again, and I still couldn't get into xrecovery. Do you think the problem is in conflicting busyboxes?
Sent from my X10a using XDA App
tot31 said:
I had the same problem before when I updated my busybox to the wrong version. What I did was using the latest flash tool 0.2.9.1 to reinstall xrecovery. These are the steps.
1. Connect your phone to the pc.
2. Run flashtool 0.2.9.1
3. A pop up window will come up and select x10.
4. Select Ask Root Permission on the flashtool and select Allow when SU app appears on your phone.
5. Then select xrecovery on the flashtool and it will install xrecovery back for you.
6. Reboot the phone and try press back button a few times when you see SE logo appears.
Hope this will help you.
Click to expand...
Click to collapse
Did this, and still no luck.
OK do this.
Make sure you have android sdk installed.
Open up command.
type
Code:
cd <path to adb.exe>
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
chmod 4755 /system/bin/sh
then push the 3 files to /system/bin
It should work. Installing from flash tool doesn't work for me don't know why. So every time i flash se 2.1 through flash tool i do the above.
and by the three files, you mean the chargemon, busybox, and xrecovery.tar?
okayy, so android SDK refuses to install. Any other ways i can make it work? What does FreeXperiaRecovery do?
Galaxynova88 said:
and by the three files, you mean the chargemon, busybox, and xrecovery.tar?
Click to expand...
Click to collapse
Yes, those are the files. The problem could be the conflicting busybox files. Find where the busybox install app placed the file in 'system' and remove it and then try again.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Galaxynova88 said:
okayy, so android SDK refuses to install. Any other ways i can make it work? What does FreeXperiaRecovery do?
Click to expand...
Click to collapse
To install the SDK you first need to have the latest JAVA JDK. FreeXperia is just a different recovery that is almost identical but the files are in a different location. Dont bother with it, if you do it right XRec will work.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Have installed and run xrecovery many many times. Dont know if this will help but here goes.
Connect to sues and fresh install of 2.1
Reboot phone
Connect back to pc and using flashtool root phone.
Wait for reboot
Connect to market download busybox and install
Open busybox and clixk bottom button will install latest version
Download xrexovery apk version3 from zhidu thread on xda
Reboot phone
Press on xrecovery icon in app drawer and install xrecovery
All 3 icons on left should have green tick when finished
Reboot phone
On sony ericcson logo press back button ( think any button will work) many times quickly
Enjoy xrecovery and the devs amazing roms
Kieron
Sent from my X10i using XDA Premium App
Excuse any spelling and gramma . Wrote this whilst driving a crane in work lol
Good luck
Kieron
Sent from my X10i using XDA Premium App
There is no reason to install busybox if you are installing XRecovery! XRecovery is dependant on busybox being installed in the same folder and it's one of the 3 files installed. You could maybe install the latest busybox in the system>bin and then just install the other 2 files but all installing it in the system and then installing the one from XRec will do is cause potential conflict. Installing busybox with XRec installed will break your recovery and mess up your phone so you need to reflash. Just follow the instructions in the XRec thread, dont add any steps or skip any and you'll be fine.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Related
I have found *similar* threads but not exactly this : Prior to updating to .435 through SEUS, I was able to use Xrecovery 0.2 to backup my system image. I just tried to backup a new updated image, and I cannot access xrecovery. I know the procedure is to hit the back button repeatedly at the white SE logo, and that worked prior to the update, but now it just continues to boot up the phone into normal mode. I tried to reinstall xrecovery with the Xrecovery APK already i the app drawer, but no dice. The backup files I already created are still in /sd/xrecovery/backup. I saw them through root explorer. If this question has already been asked, I am sorry. I did do a search
I am rooted with SuperoneClick. Titanium Backup, Busybox & Superuser all verified working.
Thanks all!
Try the newest xrecovery.
Sent from my X10i
Lord Takyon said:
Try the newest xrecovery.
Sent from my X10i
Click to expand...
Click to collapse
I tried installing 0.3, got the msg "install failed". Think I need to delete v 0.2? I was afraid to do that as I assumed it would take my old backup (pre-.435) with it.
Thanks for the reply.
same here, root explorer is set on RW, titanium is working, busybox installed, but i get the red signs when i try to install xrecovery 0.3
+1
At last I managed to install xrecovery v3 manually instead of automatically. I hope this help.
Sent from my X10i using XDA App
what about automatic installation?
Can somebody help me and said how to update to .435
srdjak said:
Can somebody help me and said how to update to .435
Click to expand...
Click to collapse
2.1.A.0.435
GUIDE
Did you install xrecovery since you updated your firmware to .435 ?
Sent from my X10i using XDA App
Auto instal v03 didnt work for me after latest seus update(.435)
Tehouster said:
what about automatic installation?
Click to expand...
Click to collapse
Sent from my X10i using XDA App
teddymild said:
Auto instal v03 didnt work for me after latest seus update(.435)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I flashed custom ROM to get 2.1.A.0.435 update and xRecovery is installed(.3) so I recommend that.
I tried both the manual file copy way and the auto install from the APK. identical result from both.. no xrecovery on reboot. I did get a suggestion to try to actually flash xrecovery using the new flashtool .026, which includes an option to install busybox/xrecovery. I will try that as soon as soon my phone charges back up and post the result.
Thanks everyone!
use THIS tool.
if any doubt/questions HERE
I used the newest flashtool, it said xrecovery installed, but I can never get into xrecovery menu
vpllover said:
I used the newest flashtool, it said xrecovery installed, but I can never get into xrecovery menu
Click to expand...
Click to collapse
Reinstall from flashtool again
Update : reinstalled xrecovery .03 files manually= WORKED!!
Thanks for all the help, tips & advice!!! Got it going. Manual file copy works w build .435! Just need to copy the files from Android/data/ directory on your SD card into system/bin with root explorer on your phone . I had tried repeatedly copying the 3 files from the /res/raw folder from my pc to the phone but it never worked.
Thanks again all.
Im having trouble getting busybox to install properly.
I have rooted my phone but when i DL busybox from the market and open it it gives me a blank pop up with an OK button, then it just says Looking for BusyBox. When I hit install, i get a FC. What am i doing wrong>?
synn21588 said:
Im having trouble getting busybox to install properly.
I have rooted my phone but when i DL busybox from the market and open it it gives me a blank pop up with an OK button, then it just says Looking for BusyBox. When I hit install, i get a FC. What am i doing wrong>?
Click to expand...
Click to collapse
Have you tried installing busybox from Flashtool?
Try rebooting your phone and then try running the busybox installer.
no luck
Try installing Titanium Backup from Market and then install busybox from there
Use flashtool to install busybox.
still no luck
When using flashtool to root and flash busybox, make sure your phone is in debugging mode.
OK I was able to get it to work but now i have another problem. After getting busybox and xrecovery installed, i rebooted and went into Xrecovery and started to install a custom ROM BUT my battery fell out in the middle of the process (stupid me) so now i've just got a screen stuck at Sony Ericsson. What can I do to get the OS back on?????
U must use flashtool again to fix. Then redo root and busybox cuz flashtool wipes everything
Of that doesnt work. Use seus
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
synn21588 said:
OK I was able to get it to work but now i have another problem. After getting busybox and xrecovery installed, i rebooted and went into Xrecovery and started to install a custom ROM BUT my battery fell out in the middle of the process (stupid me) so now i've just got a screen stuck at Sony Ericsson. What can I do to get the OS back on?????
Click to expand...
Click to collapse
You can use Flashtool to flash the 2.1 SE stock ROM.
or
You can use SEUS to reinstall the 2.1 SE
or
If you made a backup of your ROM in xRecovery, you can restore it.
OK when i tried to go thru SEUS it said that i had the most up to date software and gave no option for a repair/reinstall. I uninstalled SEUS and am reinstalling it now
OK I still get the same message when trying to use SEUS. What can i do differently? Plz help i want my phone back
synn21588 said:
OK I still get the same message when trying to use SEUS. What can i do differently? Plz help i want my phone back
Click to expand...
Click to collapse
Have u tried flashtool?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Ok once i was able to hunt down the Global stock rom and flash it via flashtool everything worked fine
synn21588 said:
Ok once i was able to hunt down the Global stock rom and flash it via flashtool everything worked fine
Click to expand...
Click to collapse
Good to know that ... Have your phone rooted and install busybox from there as well
I want to know if there is any other way to flash a cusom ROM, like Froyo or Gingerbread without using xRecovery, because I can't boot into recovery.
Tried to install xRecovery using the app, but it doesn't let me install it. Tried the manual way, I've put the 3 files in System/Bin and it still does not boot into recovery.
I have a 1.6 firmware and I can't install official 2.1 because it gives me an error when I try to install it via PC Companion and when I try to flash a firmware using FlashTool, my phone won't boot. The only firmware I can flash is from ROOT_F3V3 so that my phone can boot.
I have no Repair button in SEUS, it just sais that there is no software update for my phone and the only choice I have is Finish. This happens for no matter what firmware I install.
Can you help me please?
what basebrand are you running and what generic rom are you flashing with your flashtool? Also make you have the latest flashtool...it should isntall xrecovery for you
aval1392 said:
what basebrand are you running and what generic rom are you flashing with your flashtool? Also make you have the latest flashtool...it should isntall xrecovery for you
Click to expand...
Click to collapse
baseband 1.0.14, build R1FA014, flashtool 0.2.8.0
Installed xrecovery using flashtool and I even gave the command to boot recovery from flashtool but it won't. It boots normaly
I've flashed: X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897; X10a_1.0_2_1_A_0_435; X10i_2.0.A.0.504_Generic; nordic flasher for R2BA026, and I think I tried some other, but I don't remember.
this may sound silly...but are you constantly tapping the "back" button when the sony ericsson logo pops up
aval1392 said:
this may sound silly...but are you constantly tapping the "back" button when the sony ericsson logo pops up
Click to expand...
Click to collapse
Of course!!
busybox installed as well?
aval1392 said:
busybox installed as well?
Click to expand...
Click to collapse
Everything installed, I have read all the important posts regarding the usage of xRecovery. That is why I'm asking for another way to flash custom ROM's, because I tried everything from the forum posts, everything that would normaly work, and I get zero results
You don't have to put those 3 files in system/bin.Just find system/bin with your Root Explore,check on all 9 permissions of this folder and then go to the XR app and install it.If you still can't boot into XR after installation,maybe you should try Xrecovery 0.0.1.version.It always works for those people who can't boot into XR just like you.Good luck.Sorry for my bad English.
Hmmm...sorry i couldnt be more help...the only thing i could possibly think of is flashing a new basebrand AND firmware at once...hopefully you get this issue resolved later. Best of luck
vammina said:
You don't have to put those 3 files in system/bin.Just find system/bin with your Root Explore,check on all 9 permissions of this folder and then go to the XR app and install it.If you still can't boot into XR after installation,maybe you should try Xrecovery 0.0.1.version.It always works for those people who can't boot into XR just like you.Good luck.Sorry for my bad English.
Click to expand...
Click to collapse
What 9 permissions for system/bin?
Draganu said:
What 9 permissions for system/bin?
Click to expand...
Click to collapse
Longpress on 'bin',and change file permissions,√ all of them.And then go to the Xrecovery app,install it.Done.Then reboot your phone see if u can boot into Xr.
vammina said:
Longpress on 'bin',and change file permissions,√ all of them.And then go to the Xrecovery app,install it.Done.Then reboot your phone see if u can boot into Xr.
Click to expand...
Click to collapse
changed permissions an tried to install xrecovery through flashtool. here is what it says ERROR - Failure [INSTALL_FAILED_OLDER_SDK] (xrecovery 0.2 and 0.3)
Draganu said:
changed permissions an tried to install xrecovery through flashtool. here is what it says ERROR - Failure [INSTALL_FAILED_OLDER_SDK] (xrecovery 0.2 and 0.3)
Click to expand...
Click to collapse
What about try to use the xRecovery installer app in your phone?
vammina said:
What about try to use the xRecovery installer app in your phone?
Click to expand...
Click to collapse
it allways says that the app could not be installed on my phone
My camera does not work on this phone (don't know why, it is as it isn't there), could this be a problem?
Draganu said:
it allways says that the app could not be installed on my phone
Click to expand...
Click to collapse
That's weird...It always works for me.Maybe try another version?like 0.0.1 Beta?Guess that's all i can help...Just be patient, wait for someone else to solve the problem.Good luck!
So i've tried different ways of doing it...
- rooted using "All in one solution by Mikevhl"
- download and installed xRecovery 0.3
- rebooted and spam BACK when SE letter comes up, nothing happened.
- Reset back to factory
- rooted the same way
- download BusyBox from Market, installed ans symlink the latest 1.19 BusyBox
- installed xRecovery 0.3
- rebooted, again, spamming BACK and nothing happen
I've tried having the USB cable plugged in, and unplugged. Both way give me the same thing... What else am i missing? UGH...
let me share what i did
after rooting... i downloaded the xrecovery rar file from here
then i downloaded Titanium backup from the market. Once installed i clicked "Problems?" on that app and it downloaded busybox
after busybox installed i then unpacked the xrecovery on my pc. it contains three files (chargemon busybox and xrecovery.zip)
i copied those three to my SD card.
On my phone i opened root explorer, opened sd card and selected those three files then clicked MOVE
set root explorer to mount R/W then go to system/bin and paste the three files there.
reboot and keep pressing the back key once the SE white logo apprears. VIOLA!
"spamming" the back button didnt work for me. you have to press it once every second.
codenamezero said:
So i've tried different ways of doing it...
- rooted using "All in one solution by Mikevhl"
- download and installed xRecovery 0.3
- rebooted and spam BACK when SE letter comes up, nothing happened.
- Reset back to factory
- rooted the same way
- download BusyBox from Market, installed ans symlink the latest 1.19 BusyBox
- installed xRecovery 0.3
- rebooted, again, spamming BACK and nothing happen
I've tried having the USB cable plugged in, and unplugged. Both way give me the same thing... What else am i missing? UGH...
Click to expand...
Click to collapse
Dude try to install busy-box from Titanium Backup..And then use the files which i uploaded below and use them instead of files u got from the xRecovery thread....Do the steps as same as written on thread,but use my file...You'll see it soon!!!!
Hi you can use the flash tool for x10 mini, first root and it will automatically restart, then press ask for permissions, the the xrecovery button becomes avaible and finally press it . Just dont press the optimize button coz it's intended to jit the big xperia with v2 jit, if you press it your device will be stuck in an infinite loop and never get out of that without removing the battery cable inside your phone
PaulitoX77 said:
let me share what i did
set root explorer to mount R/W then go to system/bin and paste the three files there.
reboot and keep pressing the back key once the SE white logo apprears. VIOLA!
Click to expand...
Click to collapse
I will try it tonight, but also faced another problem, after i re-mount it with RW, if i reboot, everything goes back to RO. I try to locate the equivalent of /etc/fstab in the android but i couldn't find it.
Does your phone's file-system permission stick after reboot?
Are you guys all using the 0.1 beta or the latest 0.3 releases?
Beware of the market busybox, I updated mine to .19 and it caused major problems.
I was using MiniCM, installed the market busybox and the phone looped. Also, when I was using Srom, I uninstalled some system apps (the usual stuff I don't use) and the phone rebooted and I lost my root... which meant that I couldn't get into recovery.
So maybe try pratyush_gamer's idea, should work, his knowledge has helped me!!
Still no go, tried titanium backup's busybox, tried to manually copy and paste those 3 files, tried to delete those 3 files and reinstall the xRecovery package...
I'm running 2.1.1.A.0.6 and Kernel 2.6.29 SEMCHost#1
Should i downgrade or something?
Did you upgrade using the below method? I'd and it worked for me.
http://forum.xda-developers.com/showthread.php?t=947290
I didn't do the manual recovery thing, I downloaded Bin4ry's flash tool
http://forum.xda-developers.com/showthread.php?t=826455
It does everything for you root, flashing, JIT, recovery and remove system apps. Suggest you check it out.
These are the methods I used, let me know if it works
Oh and don't worry about the optimize button, it works fine on the mini. If you download the X10 version it might loop after JIT but theres a mini version too.
christophermaisch said:
Did you upgrade using the below method? I'd and it worked for me.
http://forum.xda-developers.com/showthread.php?t=947290
I didn't do the manual recovery thing, I downloaded Bin4ry's flash tool
Click to expand...
Click to collapse
I download the flashtool before, and the firmware, but when i select Flash, it never let me select the Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.zip nor the extracted ftf file...
What I did is replace my build.prop (the one sitting in /system) with the one pedrocel85 provided, rebooted, connected my phone to SEUS and did the upgrade the normal way through SEUS and then did the JIT, recovery etc. modding afterwards with flasher. So I haven't used the "flashing" capability of the tool and can't tell you much about the firmware side.
Check your basebrand: M76XX-TSNCJOLYM-53404015, maybe that could be the problem.
Do you have SEUS installed on your PC? If not, get it off of the SE website try replace the build.prop, reboot and follow the SEUS steps.
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
You will end up with the exact firmware that I have.
Good luck
Same issue here
I have the fresh newest firmware from SE. The 3 Xrecovery files are installed in the bin folder.
I did follow all the steps and can't get the recovery mode.
I've tried for hours different ways. It just does not work. I gave up. If there is a new release I will try.
koa
christophermaisch said:
What I did is replace my build.prop (the one sitting in /system) with the one pedrocel85 provided, rebooted, connected my phone to SEUS and did the upgrade the normal way through SEUS and then did the JIT, recovery etc. modding afterwards with flasher. So I haven't used the "flashing" capability of the tool and can't tell you much about the firmware side.
Check your basebrand: M76XX-TSNCJOLYM-53404015, maybe that could be the problem.
Do you have SEUS installed on your PC? If not, get it off of the SE website try replace the build.prop, reboot and follow the SEUS steps.
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
You will end up with the exact firmware that I have.
Good luck
Click to expand...
Click to collapse
It said "No new software is available for your phone"... I already have the latest firmware.
OK. I've re-format my SD card, reset to factory setting AGAIN. (however, is weird, the build.prop that i put in earlier is still there)
So i downloaded:
- xRecovery 1.0 beta (i read that the 2.0 and 3.0 doesn't work
- install busybox 1.15.2
- install RootExplorer and copied the xRecovery files to system/bin
- chmod 777 all the files
Reboot nothing happen...
- copy paste the xRecovery files into system/xbin (desperately trying to get this **** to work)
Reboot... nothing happen. i was spamming the back button the whole time. I've seen some youtube video, people spam it and the xRecovery menu come up within like half a second after the SE logo come out...
This thing won't go into the xRecovery at all. I'm completely out of idea... If anyone else have any other new tricks, please let me know.
Fixed. Went to redownload another FlasherTool, using the non-beta v2.8.0
- Hit Root, Reboot
- Hit Ask Root Perms
- Optimize (maybe this is optional, but i was trying it out and hit it)
- Hit xRecovery
- Advanced -> xRecovery -> Reboot into xRecovery.
Awesome, thought the flasher would work!
Enjoy!!
koalaii said:
Same issue here
I have the fresh newest firmware from SE. The 3 Xrecovery files are installed in the bin folder.
I did follow all the steps and can't get the recovery mode.
I've tried for hours different ways. It just does not work. I gave up. If there is a new release I will try.
koa
Click to expand...
Click to collapse
Try Bin4ry's flasher tool
It works
It works, Xrecovery is now installed.
The steps I have followed :
- First, I installed the latest firmware from SE : Latest 2.1.1.A.0.6 SE firmware because I just got a new Xperia Mini I'm upgrading to MiniCM6.
- I have downloaded the 3 files given by pratyush_gamer in this post (post No4)
- Upload these 3 files in the SD card
- Using rootexplorerthe 3 files were copy/paste in the system/bin
- Restart the phone while pressing the "back" button.
Many thanks for your help
koa
Does it exist any script or somthing to get cwm to stock SE rom?
Lucce96 said:
Does it exist any script or somthing to get cwm to stock SE rom?
Click to expand...
Click to collapse
Yes, downloand aais for xrecovery from xda, run script via teminal emulator (very simple) then install cwm via xrecovery
Ameijer said:
Yes, downloand aais for xrecovery from xda, run script via teminal emulator (very simple) then install cwm via xrecovery
Click to expand...
Click to collapse
how do I install cwm via xrec?
Easy, search for the file on this forum (cwmr3 for xrecovery.zip) and install the zip file after rebooting into xrecovery. Have you got xrecovery working now?
Ameijer said:
Easy, search for the file on this forum (cwmr3 for xrecovery.zip) and install the zip file after rebooting into xrecovery. Have you got xrecovery working now?
Click to expand...
Click to collapse
the thing is that I got the rom froyobread.v023c installed. And none of xrec or cwm works in that version works, so i dont know what to do..
and i cant get the phone into flash mode(dont know if its my microusb contact that is the problem), so I dont know what to do!
Should i try copy those 3 files in the xrecovery post to system/bin or what? Which files are the dualrecovery files?
Lucce96 said:
the thing is that I got the rom froyobread.v023c installed. And none of xrec or cwm works in that version works, so i dont know what to do..
and i cant get the phone into flash mode(dont know if its my microusb contact that is the problem), so I dont know what to do!
Should i try copy those 3 files in the xrecovery post to system/bin or what? Which files are the dualrecovery files?
Click to expand...
Click to collapse
I must admit am i not an expert, but why don't you just go back to default Rom via SEUS and then follow the steps to install xrecovery via AAIS+CWM? I am certain this will work.
Use mini rom manager no need to be in xrec to install just dl and find it (cwm) install
Sent from my U20i using XDA App
Ameijer said:
I must admit am i not an expert, but why don't you just go back to default Rom via SEUS and then follow the steps to install xrecovery via AAIS+CWM? I am certain this will work.
Click to expand...
Click to collapse
Yes of course i would have done that if I could get into flash mode.. and I will test if that works on a friends computer tomorow ( my computer is crap! )
But I just think, what if that doesn't work.. what to do then? Do it work to change the files in system/lib so i can come in to xrec, and then flash another rom?
Sent from my U20iro.product.brand=SonyEricsson using Tapatalk
use the flashtool modified by me to install CWM (just click xrecovery link)
http://www.multiupload.com/7W6TNQUAVN