[Q] Think bricked phone, please help!! - Vibrant Q&A, Help & Troubleshooting

I was on the newest triger rom, then I flashed this new one (Rom)Simply Galaxy RC3.3 Update 1(JVB GB 2.3.3)(5/11/11) \\ and my phone just shows the vibrant screen, then it goes to a static screen and repeats, I am a noob please dont hate. I have read the forum already and says to flash to stock and then try again. But unfortunetly I cannot seem to flash back to stock. Can some one please leave me some detailed steps or a hint in the right direction. Thank you much appriciated.

try to odin to eugene's no brick jk2 froyo and then to stock jfd.

ok, thank you. Will try that when I get off work here in a couple hours. I will let you know.

fixed phone, know working. Thanks.

Related

[Q] samsung galaxy s vibrant fix

Hey guys,
I have a samsung galaxy s vibrant and when i turn it on the white logo comes on then it says vibrant in white ... and then goes black
Can anyone help me out?
We need way more info than that. What were you doing before that happened? Did you try to flash a custom ROM? Which one? What are you trying to do? Is it a bootloop or does it just go Vibrant and then black?
If you need help, we can but we need to know more about the problem before we can diagnose.
thanks for the reply,
ok ... im not very good with all this stuff
i have tried flashing a stock rom on my samsung galaxy s vibrant, thing is i dont think it is the right one for my phone cuz im on bell canada network and i cant find this authentic rom anywhere ...
anyway the situation with the phone is that i can get it into download mode, i can get it into recovery mode .. but whenever i try to boot it up it goes into a restart loop
i am completely lost at this point and have no clue what to do
thanks for your time
Ok that is just what we need to know. The Bell version I believe is the I-9000m. If you go to the I-9000 forums, there is a section for the M version. Chances are that you did flash the wrong firmware. They should be able to help you out over there. Good luck.

[Q] removing recovery

hi,
i rooted my galaxy tab 10.1 3G (europe) GT-P7500.
and installed CWM but the CWM isnt working properly it keeps flashing the screen and therefore i cannot read anything that is in the recovery...
(oh btw i unrooted it already...)
is there any way i can get it back to stock?
i tried Odin, watched some movies, but Odin keeps telling me it failed.
searched the forum cannot find it...
also i cant seem to find the Stock rom for my tab.
can you please help a noob like me? (plz tell me as detailed as you possibly can so i cant screw it up..)
Thanks in advance
(oh btw i unrooted it already...)
a friend gave me a solution... i had to use the files for fummies and flash it with stock rom using Odin.
thanks anyway

[Q] How do I put my vibrant back to factory "out the box" settings?

i have a vibrant through t-mobile and i rooted and put a custom rom on a few year ago. now i wanna put it back to factory as if i just bought it and give it to my gf to have a better phone. How do i do that? I've tried couple of things i've seen on the internet and think i soft bricked it. it's stuck on the custom rom's flash screen before the galaxy s flash screen. I am a noob so please if anyone can help i would greatly appreciate it!!
Try following this guide... http://rootzwiki.com/topic/605-guid...nja-apps-everything/page__p__11106#entry11106
If you need any help or have any questions, feel free to ask here.
Sent from my SGH-T959

[Q] Galaxy P1000 black screen now no boot

Hey guys, Please help if you can. Much appreciated
Okay so I have a P1000, bought from Dubai. decided to flash in a new rom because I realised how crappy the old, 2.2 Froyo was. It was an arabic Rom. So When flashing I flashed to a wrong rom, one that was not compatible. Then I got a black screen. All black, it was detected by odin and zadig. I read somewhere to use the overcome rom to get out of this problem.
I downloaded the rom. But when I tried switching on the tab after a nght switched off. It was no longer detected by the pc. doesnt seem to be switching on. What should I do?
Thanks guys, In advance
Iru10 said:
Hey guys, Please help if you can. Much appreciated
Okay so I have a P1000, bought from Dubai. decided to flash in a new rom because I realised how crappy the old, 2.2 Froyo was. It was an arabic Rom. So When flashing I flashed to a wrong rom, one that was not compatible. Then I got a black screen. All black, it was detected by odin and zadig. I read somewhere to use the overcome rom to get out of this problem.
I downloaded the rom. But when I tried switching on the tab after a nght switched off. It was no longer detected by the pc. doesnt seem to be switching on. What should I do?
Thanks guys, In advance
Click to expand...
Click to collapse
Your in the wrong forum. If you flashed something from here your Tab is bricked. Only way to recover is JTag (search for it online for the service) or warranty from Samsung (don't tell them you flashed something).
Search for your specific section for your device and you might get more answers. This is NOT the right section.

Wrong rom on my gt-i9300

Hi! it is my firts post here, im desperate for help!!
I got a s3 i9300, i want to flash my device to get a unbranded version, the problem was that i install a sch-535 rom, the phone barely works, i cant use data, i barely have signal, but when i reallyze my error i try to flash an i9300 rom but i cant, it stops in the middle and dont let me do it, so i know im stupid, but i really need to fix this, anyone can help me please? thank you guys!
poyotpm said:
Hi! it is my firts post here, im desperate for help!!
I got a s3 i9300, i want to flash my device to get a unbranded version, the problem was that i install a sch-535 rom, the phone barely works, i cant use data, i barely have signal, but when i reallyze my error i try to flash an i9300 rom but i cant, it stops in the middle and dont let me do it, so i know im stupid, but i really need to fix this, anyone can help me please? thank you guys!
Click to expand...
Click to collapse
hi dude,
I will not do a tutorial or how to, or explain, but there is excellent and complete informations and threads from others members in XDA or youtube or other forums
for stock fw search it from sammobile (stock rom - to your country / language) - needs register
http://www.sammobile.com/firmwares/
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
or here in xda - I do recommend a custom rom rooted ... try It ... you will want more and more power ... LOL ...
[10/04] INDEX of ROMs [Android Development Forum] - read in changelogs if the rom support multi csc ... nice fun
http://forum.xda-developers.com/showthread.php?t=2220154
* link updated and correct
best regards
if you can go into download mode, just flash a stock rom via odin. good luck
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
post an Odin screenshot if it doesn't go through
Hi guys!, first of all thank you for your support, here are the updates, i try flashing it via odin and a error was show and it was imposible to flash it that way, because i was desperate and impatient for having it back, i talk to a "expert" friend of mine, he told me that the problem was that the bootloader was locked by verizon, thats why i cant flash it, so he rooted the phone, and download e-z unlocker app or something like that, he install the app and then proceed to unlock the bootloader, everything went well, the turn off the phone for putting it on download mode but the phone wont turn on, it doesnt even charge it was dead, hard bricked :crying: ,so i reallyze that all my impatience went wrong and now i have a 900 dlls brick (im from mexico thats whhy is so expensive, a couple months ago) and well the only brigth side is that im going to try guarantee and say that the phone just experience a sudden death case and hopefully the belive me i´ll keep you guys updated! thanks for the support!
first of all, I asked for an Odin screenshot.
second of all, how can the bootloader be locked by Verizon if it's not a Verizon phone? i9300 is an international unlocked phone. If you messed with the bootloader, then I don't think there's anything you can do

Categories

Resources