Hi All,
I have a little problem with my HD2. It has bin there for quite some time but in the past i used Active sync as a workaround to flash my Phone.
But i want to update my radio now. And i'm on Android NAND and SD. So normaly you just flash your radio or winmo 6.5 rom trough HSPL.
But when i hold volume down and boot HSPL i get the tri color screen. But i get a Serial message in the botem of the screen. And it just stay's there.
I took a other SD card formatted it with FAT32 and placed the LEOIMG.nbh file on that location but still the same issue. Cant flash the radio or the wimo rom. Does anyone have a idea how to fix this?
Thanks in advance!
Nelthalin said:
Hi All,
I have a little problem with my HD2. It has bin there for quite some time but in the past i used Active sync as a workaround to flash my Phone.
But i want to update my radio now. And i'm on Android NAND and SD. So normaly you just flash your radio or winmo 6.5 rom trough HSPL.
But when i hold volume down and boot HSPL i get the tri color screen. But i get a Serial message in the botem of the screen. And it just stay's there.
I took a other SD card formatted it with FAT32 and placed the LEOIMG.nbh file on that location but still the same issue. Cant flash the radio or the wimo rom. Does anyone have a idea how to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Can you sync your phone with the computer? Otherwise you may have a bad USB port. Also, try a hard reset (backup first).
stevedebi said:
Can you sync your phone with the computer? Otherwise you may have a bad USB port. Also, try a hard reset (backup first).
Click to expand...
Click to collapse
Well i dont sync my tel trough USB with android. I dont have wimo anymore.
And about the USB port i use that to put music on the SD card and make android backups. And i have not had issues.
The HSPL does not flash from USB it should pickup the image file on the SD card.
Nelthalin said:
Well i dont sync my tel trough USB with android. I dont have wimo anymore.
And about the USB port i use that to put music on the SD card and make android backups. And i have not had issues.
The HSPL does not flash from USB it should pickup the image file on the SD card.
Click to expand...
Click to collapse
I suppose since you are not using WM, there is no option to change the USB port from syc to USB drive? Checking this setting would be the suggestion at this point. You are right, the USB port works.
stevedebi said:
I suppose since you are not using WM, there is no option to change the USB port from syc to USB drive? Checking this setting would be the suggestion at this point. You are right, the USB port works.
Click to expand...
Click to collapse
I cant remember there was a need to change any option to flash from SD card with HSPL. The only thing you needed to do is place the image with the correct name.
Couple points.
1) When you put it in tri-color bootloader then connect to your PC, does it not say USB? If it does you can flash via RUU, if not we have a problem.
2) You cannot flash anything from a microSD above 8gb. If you are using a 16 or 32 then that is your problem, try an 8 and you will be fine.
Nelthalin said:
I cant remember there was a need to change any option to flash from SD card with HSPL. The only thing you needed to do is place the image with the correct name.
Click to expand...
Click to collapse
On WM, you cannot flash via USB unless it is in activesync mode. Otherwise the computer just sees the device as a USB drive. I don't know about other OS.
orangekid said:
Couple points.
1) When you put it in tri-color bootloader then connect to your PC, does it not say USB? If it does you can flash via RUU, if not we have a problem.
2) You cannot flash anything from a microSD above 8gb. If you are using a 16 or 32 then that is your problem, try an 8 and you will be fine.
Click to expand...
Click to collapse
I will try that.
As for the SD card i was using a 4GB card.
stevedebi said:
On WM, you cannot flash via USB unless it is in activesync mode. Otherwise the computer just sees the device as a USB drive. I don't know about other OS.
Click to expand...
Click to collapse
Y i know. Dont think there is a way to flash in android. It might be possible to flash trough MGDLR with the right tools. But as far as i know there are only Android NAND flash tools not Wimo / Radio. But i will try the USB connection trough HSPL.
Nice the USB connection did work on my new PC! i had problems on a old one maybe thats why i forgot about that.
Win7 detected the flash device installed the drivers and after that i could use the CustomRUU to flash.
Still strange that the SD card did not work. But now i have a working solution Thanks guy's!!
Nelthalin said:
Nice the USB connection did work on my new PC! i had problems on a old one maybe thats why i forgot about that.
Win7 detected the flash device installed the drivers and after that i could use the CustomRUU to flash.
Still strange that the SD card did not work. But now i have a working solution Thanks guy's!!
Click to expand...
Click to collapse
For Nand Android, when you reboot, you will come to a white "fastboot" screen.
Press Power button while this screen is still on, and it will bring you to the CWR screen where you will be able to update from sdcard.
http://forum.xda-developers.com/showthread.php?t=1914723
Post #3
Related
Hi,
I would very high appreciate if someone in this community could help me with the Hard-SPL upgrade problem. I read a lot of threads in this forum and in other forums. I tried to follow several solutions but I get stuck all time during the upgrade to hard spl 2.10 with an error 260.
I connected my mobile via USB cable. WMGC 6.1 is running on my PC --> synchronizing has finished. Then I started Ruuwraper on my vista PC --> after I answered yes to upgrade to hard-spl 2.10 --> on my mobile appeared enterBL.exe and was asking me if I should run it Y/N. Then I replied with yes --> afterwards it appeared the bootloader
IPL-SSPL by Desc
SPL-1.09ds
but then there is no reaction for about half a minute. Afterwards it appears on the PC "error 260" (I should check if the cable is connected via USB)
However I see that USB appears on the bootloader screen. In my opinion it should work, but didn't !
if I go into bootloader I read following :
IPL --> 1.01
SPL --> 1.04
IMG 1.23.707.4
My desktop OS --> vista 64
windows mobile center --> V6.1.6965
Can it be that I need a special USB cable for my HTC ?
Or ????
Thanks in advance for your help.
I know that there is a problem with using 64bit OS versions, so if you have another computer you can use that isn't 64bit to check whether it is that or not.
Good luck
Thanks for your fast reply.
I tried on my other computer (laptop installed windows XP SP3). However I failed with the same problem.
When i first tried to flash my device i had a problem of it not connecting to the boot loader, it seemed that every time the phone changed to boot loader the computer would no longer recognize it and it wouldn't be synced with the computer. i think i managed to get around this problem by putting my phone into boot loader (ok button + power + reset button) and then connecting it for some reason the computer would then recognize it and it would work. I cant remember what it was i was flashing it may have been hard-spl
Hope this helps, Good luck
Edit: I found this information on completely different forum that came from HTC about what to do
HTC's Answer: I was instructed to disconnect and soft-reset. Then I was instructed to go to Settings>System>Memory>Running programs and Stop All. Including Active Sync. We then reconnected the phone. Established a sync and ran the utility. Active Sync still goes away and you get the falling tone of a Disconnect. Ignore it and proceed as if everything is connected. Bang Zoom. 10 minutes later I'm loading software. *dance*
Click to expand...
Click to collapse
this is what is meant to happen as i flashed a new rom the other day on vista and windows had to find the device again and reconnect i think after this small pause it worked again.
Ok, I tried. Following result :
I see that Serial goes to USB but then no reaction. I can see on the WMDC 6.1 --> it shows still "not connected".
I found one article below and tried as well but it starts not automatecly from the bootloader too :
HERMIMG.nbh on a FAT32 filesystem
http://forum.xda-developers.com/files/hermes_sd_flashing.jpg
1. If you want to install any ROM (NBH) which is not supplied by your operator or the CID does not match then you will need to SuperCID your device. This can be easily done by installing HardSPL and should be the first thing done if doing any upgrading.
2. Empty (erase the contents) of your 2 gig or smaller non-SHDC MicroSD card (the Hermes bootloader does not support SDHC) from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work) make sure it's formated in FAT32 format. As a precaution you might want to check the MicroSD card for file errors. i.e (Properties->Tools->Error Checking)
3. Extract the .NBH file from your preferred ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
4. Rename the .NBH file to HERMIMG.nbh and copy it to the root folder of your microSD card.
5. With microSD card inserted on the phone, start the bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom).
6. You should see a screen similar to the one pictured on the left (What lines appear depends on what is included in the nbh. If the file doesn't include bootloader code, that line will not appear, and so on.) Confirm flashing on screen by pressing the power button.
7. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
8. After you get the confirmation that the upgrade is complete, softreset your device.
So you tried flashing using the sd card method and still no result?
yes
and now I tried your suggestion with stop running programs activsync and calender.
Also the same --> error 260
I would've hoped that one of the methods would work, i take it the device syncs up fine normally to device center and you can access all your files etc?
This is the thread i quoted from there is some more information about the problem i don't know whether it will help though.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=42389&view=by_date_ascending&page=1
yes I can synchronize and I can see all the file via vista explorer.
I take it your planning to flash a newer rom onto your hermes, are you running the stock rom that came with it at the moment?
I just ran the hard-spl ruuwrapper.exe on my computer with out my phone connected this gave me the 260 error so it is most probably something to do with the phone connecting whilst in boot loader mode, did you click yes to run any program that it asked you to on the phone?
I did read some where that resetting the pc might work but i dont know whether it will make a difference considering you've already tried it on another computer.
Good luck
See my comments inline :
Scotty93 said:
I take it your planning to flash a newer rom onto your hermes, are you running the stock rom that came with it at the moment?
Actually I bought the HTC in Taiwan (CHT is the brand on the front) in a shop. At the beginning there was a chinese OS and the seller in the shop changed it to the english version.
I just ran the hard-spl ruuwrapper.exe on my computer with out my phone connected this gave me the 260 error so it is most probably something to do with the phone connecting whilst in boot loader mode, did you click yes to run any program that it asked you to on the phone?
yes, it appered enterBL.exe on my mobile. Then I answered with Y.
I did read some where that resetting the pc might work but i dont know whether it will make a difference considering you've already tried it on another computer.
yes, on my laptop (windows xp). The same problem -->error 260. There is only one difference between my desktop and my laptop. activsync (with windows xp) drops during using the program RUUWraper which WMDC 6.1 (with vista) does not.
Good luck
Click to expand...
Click to collapse
i dont really know what to suggest, what happened when you tried flashing it using the sd card method?
Tried already. Not working too.
program starts not automatically with .nbh file from the SD card when I went into bootloader.
you could try the sd card method again, following the instructions Here to the letter and see how it goes because that should bypass the problem of it not connecting and should work.
Scotty93 said:
you could try the sd card method again, following the instructions Here to the letter and see how it goes because that should bypass the problem of it not connecting and should work.
Click to expand...
Click to collapse
I tried again to flash via SD card but my mobile does not recognize the .nbh file. The mobile stays in bootloader mode and does nothing.
Edit :
maybe I made something wrong ? I used the .nbh file from the Hard-SPL. Is this ok ?
i have attached the .nbh file from hard-spl. renamed to what it is needed to be to work. reformat the memory card so that it is blank and in fat32 format, put this file on it and follow the rest of the steps.
Scotty93 said:
i have attached the .nbh file from hard-spl. renamed to what it is needed to be to work. reformat the memory card so that it is blank and in fat32 format, put this file on it and follow the rest of the steps.
Click to expand...
Click to collapse
Thanks. My SD card is already formatted with FAT32. Is it really necessary to format it again ? I deleted only the files on the SD card and tried it already but it did not work.
If yes to format FAT32 again, do you have also a program for FAT32 formating which is running on vista ?
I downloaded fat32format already but I have to find an adapter to put it into the PC to format. Or is there another possibility to format ?
From the PC I did not find a possibility to access to format directly on my mobile.
there is a formatter on vista but the memory card would have to be connected to the pc, when i brought my micro sd card it came with an adapter to an sd card so i can use it in a usb card reader or the one on the front of my tower.
other wise i dont know if you can format it this way whilst it is connected to the phone.
Scotty93 said:
there is a formatter on vista but the memory card would have to be connected to the pc, when i brought my micro sd card it came with an adapter to an sd card so i can use it in a usb card reader or the one on the front of my tower.
other wise i dont know if you can format it this way whilst it is connected to the phone.
Click to expand...
Click to collapse
Ok thanks. I have to buy an adapter. Then try again.
ye im afraid so i cant think of any other ways that might get your device to flash, you could always wait to see if one of the more senior members replies although you may have to wait until tomorrow.
Nobody have an idea why I cant have my phone recognize by the pc and the phone when i plug it in???? inb4 : another cable, another computer, uninstall the driver etc. all did this method many times. I am with videotron and the only ruu is a .exe and I think my bootloader have to be locked but how to locked it if the computer do not recognize it ?????? Im out of breathe I have spend many hours trying to solve my problem searching the net but no luck. But fortunately I have succeeds one time but after a reboot it rebegins.
LeGenDz R3DeaDz said:
Nobody have an idea why I cant have my phone recognize by the pc and the phone when i plug it in???? inb4 : another cable, another computer, uninstall the driver etc. all did this method many times. I am with videotron and the only ruu is a .exe and I think my bootloader have to be locked but how to locked it if the computer do not recognize it ?????? Im out of breathe I have spend many hours trying to solve my problem searching the net but no luck. But fortunately I have succeeds one time but after a reboot it rebegins.
Click to expand...
Click to collapse
After some reflexion my conclusion is I dont knoow why but it seems that the phone think that the internal sd card card is my micro sd card and vice versa .
P.S.: it is normal to have the folder androide.secure on the ext_sdcard but not on sdcard?
LeGenDz R3DeaDz said:
After some reflexion my conclusion is I dont knoow why but it seems that the phone think that the internal sd card card is my micro sd card and vice versa .
P.S.: it is normal to have the folder androide.secure on the ext_sdcard but not on sdcard?
Click to expand...
Click to collapse
Does the computer even detect that you have anything connected to the computer?
My android.secure folder is on (internal) sdcard. The ext_sdcard does not have that folder present.
Are you booted in fastboot?
yes but it detect a unrecognize usb device. And i think that fastboot is on in speedrom 7.5 but I put the old htc setting and disable it but it did nothing.
I was trying to go back to wm 6.5, so i connected my phone with the tricolor screen to my pc then launched RUU : I got an error saying that the phone is not connected though there was on my phone "USB".
I repeated the update process several times, changed the usb cable, checked if it works in usb mass storage in android, used another laptop : I GOT THE SAME ERROR.
karimkahale said:
I was trying to go back to wm 6.5, so i connected my phone with the tricolor screen to my pc then launched RUU : I got an error saying that the phone is not connected though there was on my phone "USB".
I repeated the update process several times, changed the usb cable, checked if it works in usb mass storage in android, used another laptop : I GOT THE SAME ERROR.
Click to expand...
Click to collapse
Try flashing from the sd card.
No need to yell.
Just tried it : Said no image .
My sd is fat32 format
karimkahale said:
Just tried it : Said no image .
My sd is fat32 format
Click to expand...
Click to collapse
You would probably be better off reading the existing thread.
wizardknight said:
You would probably be better off reading the existing thread.
Click to expand...
Click to collapse
That's what i exactly did but i got the same problem .
karimkahale said:
That's what i exactly did but i got the same problem .
Click to expand...
Click to collapse
Try a different SD card? Different USB cable? Different USB port? Different computer?
Format the SD card using the HP Tool? It's fixed crazy things in the past. Make sure you full format, FAT32.
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
boabbyshaft said:
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
Click to expand...
Click to collapse
Yes Scott. Do not make an ornament out of it!
Okay, serious .. download the ROM of your region from sammobile.com. Install Odin on your laptop. Boot your S3 in download mode. Flash the firmware from sammobile.com on your phone using Odin.
http://forum.xda-developers.com/showthread.php?t=2323847 - Follow this guide from step 2. No need to make the binary counter 0. It is important to recover your phone.
Hamza18 said:
Yes Scott. Do not make an ornament out of it!
Okay, serious .. download the ROM of your region from sammobile.com. Install Odin on your laptop. Boot your S3 in download mode. Flash the firmware from sammobile.com on your phone using Odin.
http://forum.xda-developers.com/showthread.php?t=2323847 - Follow this guide from step 2. No need to make the binary counter 0. It is important to recover your phone.
Click to expand...
Click to collapse
Hi Hamza,
Thanks for the reply. This is one of the problems noted above as that my laptop and PC will not recognise my S3 via USB. Tried different USB wires and installed various versions of the drivers, uninstalled, reinstalled etc It just will not connect be recognised.
Any other thoughts?
boabbyshaft said:
Hi Hamza,
Thanks for the reply. This is one of the problems noted above as that my laptop and PC will not recognise my S3 via USB. Tried different USB wires and installed various versions of the drivers, uninstalled, reinstalled etc It just will not connect be recognised.
Any other thoughts?
Click to expand...
Click to collapse
Sorry, I thought that your phone will get recognized when in Odin mode or download mode. I am afraid I am out of tricks for now, but let me search and get back to you in case I find anything
Hello Scott,
Can you enter in Download mode on phone?
"First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot."
For that part you don't need connection to PC (yet).
If u succeed entering in download mode, then use the link that Hamza posted, to restore your device through Odin
HI!
Its no problem to get in to download mode but as the laptop and PC will not recognise my S3, neither does Odin.
The very 1st think i knew to do was to try and flash a stock ROM via Odin, but sadly can't
I've flashed ROM's a lot however it was a rookie mistake not to make a backup on this occasion that was accessable in this situation. My backups and ROMs are on the Ext SD card....
Ive searched and the only 2 outcomes i can see to resolve are to mount my Ext SD card, which i can't do on CMR or to make the handset visible o use Odin or to drop a ROM on the Int SD but again, can't.
boabbyshaft said:
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
Click to expand...
Click to collapse
Remove your sd card..Use a SD card reader and download a rom which u can flash with your current recovery..flash that through extsdcard...
Sent from my GT-I9300 using xda app-developers app
boabbyshaft said:
HI!
Its no problem to get in to download mode but as the laptop and PC will not recognise my S3, neither does Odin.
The very 1st think i knew to do was to try and flash a stock ROM via Odin, but sadly can't
I've flashed ROM's a lot however it was a rookie mistake not to make a backup on this occasion that was accessable in this situation. My backups and ROMs are on the Ext SD card....
Ive searched and the only 2 outcomes i can see to resolve are to mount my Ext SD card, which i can't do on CMR or to make the handset visible o use Odin or to drop a ROM on the Int SD but again, can't.
Click to expand...
Click to collapse
Have you tried with another USB cable? Sometimes USB cable could be faulty.
kunal1540 said:
Remove your sd card..Use a SD card reader and download a rom which u can flash with your current recovery..flash that through extsdcard...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
did you read? he can't mount the ext sd card...
hierarchy666 said:
Have you tried with another USB cable? Sometimes USB cable could be faulty.
Click to expand...
Click to collapse
+1
We have 5 or 6 USB cables for our phones around here, and only 3 work for our S3 phones. Worth a try?
One more thing crossed my mind... In CWR, did you try "mount usb storage"? Under "mounts and storage" setting.
I had a similar problem few weeks ago, changed recovery and new recovery didn't want to read exFat card...
Sent from my GT-I9300 using Tapatalk
Soundwve said:
+1
We have 5 or 6 USB cables for our phones around here, and only 3 work for our S3 phones. Worth a try?
Click to expand...
Click to collapse
I suggest you uninstall samsung kies first.
Proceed here uninstall old samsung usb drivers too.
http://forum.xda-developers.com/showthread.php?t=2038555
There is 3 methods of installing it clearly written there with step by step instructions. Hope with this method your pc recognize your phone.
If that method fails.
Like many said you have to manually insert rom files into your external sd card using a reader. I hope your problem is not similar to this guy
http://forum.cyanogenmod.com/topic/76864-pc-wont-recognize-phone-after-installing-cm-102-20130727/
You said Odin not recognize phone how about Kies? If you have not tried Kies and you can get it to recognize your phone try this Emergency Firmware Recovery link works on S3 >> http://forum.xda-developers.com/showthread.php?t=2261153 <<
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
boabbyshaft said:
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Can you mount OTG in your version of cwm >> http://forum.xda-developers.com/showthread.php?t=1787054 << possibly flash from there..
boabbyshaft said:
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Have u tried manually installing drivers? Connect yr ph in download mode to yr pc and open device manager, pull out and see if there is any response then reinsert yr usb if u may see yr device with a triangle n ! Right click and update ' let me choose' and point to the samsung drivers folder. Cheers!
boabbyshaft said:
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Fat32 should work, not sure about NTFS... Did u tried another card? Or removing battery and reinserting after SD card format?
Thanks for all the suggestions.... Had a family emergency.
Tried everything, i now think that there is a hardware issue with the phone as its a Code 43 error whenever i try to update the driver so the handset can talk to my PC. Seen as this option looks fooked i can only now and try to figure why the Ext SD wont mount on CMR and how to resolve it.
If i can;t then no option but to send it to the big warehouse in the Sky,
Just to exclude, did you tried another SD card?
Sent from my GT-I9300 using Tapatalk
Hey,
if i connect my phone with my PC, i can normaly see all files,...
But if i want to copy a file from my computer to my phone (internal or external sdcard) its stock at 0%. (in system and twrp)
After a while (2-4minutes) windows says, that was an error with the transfer. After these message, the phone reboot (twrp)
I tried to reinstall the right usb drivers, tried sideload and adb push but.
i googled the problem, but i cant find something like this.
sideload says something with "cant read comand"
and push says its done (800mb file after 10sec :/ ) but there is nothing on the device.
I dont know what the problem is. the phone is from 2012 but EVERYTHING else is working fine.
sorry for my english
panther124 said:
Hey,
if i connect my phone with my PC, i can normaly see all files,...
But if i want to copy a file from my computer to my phone (internal or external sdcard) its stock at 0%. (in system and twrp)
After a while (2-4minutes) windows says, that was an error with the transfer. After these message, the phone reboot (twrp)
I tried to reinstall the right usb drivers, tried sideload and adb push but.
i googled the problem, but i cant find something like this.
sideload says something with "cant read comand"
and push says its done (800mb file after 10sec :/ ) but there is nothing on the device.
I dont know what the problem is. the phone is from 2012 but EVERYTHING else is working fine.
sorry for my english
Click to expand...
Click to collapse
Did you tried with another computer ?
And if you really can't fix your problem you can also use micro sd card to transfer file.
olimar7184 said:
Did you tried with another computer ?
And if you really can't fix your problem you can also use micro sd card to transfer file.
Click to expand...
Click to collapse
hi thanks for your reply
i forgot to say, its also on the sd card the problem.
i put the sd card in my tablet and its working.
panther124 said:
hi thanks for your reply
i forgot to say, its also on the sd card the problem.
i put the sd card in my tablet and its working.
Click to expand...
Click to collapse
What rom are you using ?
Maybe the problem is here
Do you tablet works correctly with your pc? (to see if the problem is the phone)
Also try other usb cable
olimar7184 said:
What rom are you using ?
Maybe the problem is here
Do you tablet works correctly with your pc? (to see if the problem is the phone)
Also try other usb cable
Click to expand...
Click to collapse
fixed! it was only on cm13.
i installed mokee rom and now its fixed.
But thank you very much for your reply!