ok so i plugged my phone into my computer in fastboot and instead of the qualcomm hd-usb drivers it changed to android adb interface why is this help please!!!!
adb is like bios so as the phone can see this via you accessing fastboot it thinks you might want to alter someting so it calls up for adb drivers so it can allow you to write. Qualcomm drivers would only apper if you need to restore something via the processor chip (QDL tool for example). If you want Qualcomm drivers to appear hold vol up and insert usb and should prompt for something like Qualcomm USB Diagnostic 9002.
passion8059 said:
adb is like bios so as the phone can see this via you accessing fastboot it thinks you might want to alter someting so it calls up for adb drivers so it can allow you to write. Qualcomm drivers would only apper if you need to restore something via the processor chip (QDL tool for example). If you want Qualcomm drivers to appear hold vol up and insert usb and should prompt for something like Qualcomm USB Diagnostic 9002.
Click to expand...
Click to collapse
im tryin to run the qtl tool my phone is well semi bricked...i can get into fastboot and recovery but i keep gettin loops and lock ups...fc's and freezing...ive tried 351,345, 1.9 streakdroid and i keep get the same problems...
what happens when u have qdl running and do vol up and insert usb?
passion8059 said:
what happens when u have qdl running and do vol up and insert usb?
Click to expand...
Click to collapse
that worked lets see how my phone likes this
passion8059 said:
what happens when u have qdl running and do vol up and insert usb?
Click to expand...
Click to collapse
everytime i try to go on the browser it restarts my phone
Related
I have a motorola motostart (xt390) and wish to unlock bootloader, root, etc. Nevertless, I just can't get into fastboot mode.
Powering up with VOL Down it access the recovery mode. The same for VOL UP+DOWN.
When i try powering up with VOL UP pressed the device simply don't power up.
Is it a malfunctioning device or some roms for this hardware simply have mysteriuos ways to enter fastboot?
The ROM is a brazilian retail, Gingerbread (2.3.6) version MAUI.11AMD.W11.37.SP.V9.F4.P1, build: ARGONM_W_07.15.04R_D.
Please! Help!
Nobody? hehehe
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
erlyneto said:
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
Click to expand...
Click to collapse
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
xshinta9 said:
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
Click to expand...
Click to collapse
Sorry by my ignorance, but SPFT is a software?
I find the SPFT that you mentioned. But, as far as I could understand the software, it is used to flash or dump rom from MTK based phones.
But there are problems:
1)XT390 appears to be based on MTK6*** phones, but is not the same, so, the roms should not work in it, right?
2)I can't use this tool to send commands to the device (like fastboot mode on other Motorola android phones), so i can't get my device id to unlock the bootloader in the morotola web site...
Do you know anything about that software, its roms and XT390? There are any ways to open a command line utility on it?
Hi bro, unfortunately I have zero knowledge on it thus far. 'am figuring out how to unlock my phone's bootloader as well, (it's a local-based chinese phone as well that's marketed under a different name)
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Mani-saini said:
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Click to expand...
Click to collapse
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Yeah first make sure you see it in the Device Manager on Windows.
galarpo said:
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Click to expand...
Click to collapse
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
how to
Mani-saini said:
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
Click to expand...
Click to collapse
1- Hold SHIFT and restart you computer, always holding SHIFT or run this "shutdown /r /o"
2- You should be now on "Advanced Startup options", select "Troubleshoot" --->"Advanced Options"--->"Startup settings"--->"restart"
3- Next select option 7
4- plug your phone to computer in fastboot mode and install flashtool drivers, remenber to say yes on the windows appearing during installation, after everything is installed, restart your computer and problem solved.
I tried to flash the developer rom from here http://forum.xda-developers.com/redmi-note-3/how-to/miui-8-6-6-236-0-1-redmi-note-3-t3404890
MIUI8 DEV Release ROM :6.11.3 fastboot version but apparently used an old miflash tool version .
While trying to flash I got the "miflash not enough storage is available to process this command" error.
Now I cant start my phone, cant go into fastboot and Miflash does not recognize the phone, when I connect to pc, the notification light blinks red like if it was in edl mode but the flash utility does not recognize the device.
Booting into fastboot mode does not work, restarting normally also does not work
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
These kinds of posts remind me of what we risk modind our device. Try on another computer, there may be issues with .net framework or something.
redminote3 said:
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
I am using the same version right now,before I used an older one when I got the error.
I think I installed all the drivers, I will try to install them again including the mipcsuite.
But should I not be able to restart or boot into fastboot mode regardless whether the phone is recognised by my pc?
Also it was recognised in the beginning but not anymore.
redminote3 said:
Which version of MiFlash are you using now? I use 2016.08.30.0
I think you only need proper drivers installed, also install MiPcSuite and adb universal drivers (i have all this) if its blinking red, then it must be in edl mode...your computer does not recognise it...
Check this : en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
So I installed the drivers again and my phone is recognized in device manager as Qualcomm HS-USB diagnostics 900e, I still dont see it in miflash and therefore cannot flash.
Try running edl.bat and then refresh miflash to see if its recognised as COM10
redminote3 said:
Try running edl.bat and then refresh miflash to see if its recognised as COM10
Click to expand...
Click to collapse
Should I create this file or where can I find it?
Any kind of help would be appreciated, because if nothing else works I will have to try the modified wire method.
I already opened the back cover to disconnect the battery for a while, didn't help, still cannot boot into fastboot.
If your phone is already in edl mode, what will wire method do for you?
Running edl.bat will require phone to be in fastboot mode.
Try this: half insert the usb cable, hold power+ both vol buttons and then fully insert the cable. Try this multiple times. This should force your phone into edl state if it already isn't... The use miflash to do the job.
I have a file through which u can enter edl mode using fastboot..if u Want I can share
I did the same mistake earlier and got stuck..adb couldn't recognize my device and was not able to enter edl mode...so I used fastboot mode to enter edl mode through a file provided on an XDA thread forum.xda-developers.com/android/software-hacking/guide-how-to-reboot-to-edl-fastboot-t3394292
hitesh1792 said:
I have a file through which u can enter edl mode using fastboot..if u Want I can share
Click to expand...
Click to collapse
The problem is I cant enter fastboot mode, I am apparently already in edl mode but miflash does not find the phone.
zsajak said:
The problem is I cant enter fastboot mode, I am apparently already in edl mode but miflash does not find the phone.
Click to expand...
Click to collapse
Did u update the Qualcomm driver??
hitesh1792 said:
Did u update the Qualcomm driver??
Click to expand...
Click to collapse
Yes, the device is also recognized by my pc as Qualcomm HS-USB diagnostics 900e, but not visible in Miflash, I tried several different versions
zsajak said:
Yes, the device is also recognized by my pc as Qualcomm HS-USB diagnostics 900e, but not visible in Miflash, I tried several different versions
Click to expand...
Click to collapse
R u using this MIFLASH tool??
en.miui.com/thread-281979-1-1.html
hitesh1792 said:
R u using this MIFLASH tool??
en.miui.com/thread-281979-1-1.html
Click to expand...
Click to collapse
Yes I tried this , also I tried the 201608 version
zsajak said:
Yes I tried this , also I tried the 201608 version
Click to expand...
Click to collapse
Can u give me a screenshot of what message does MIFLASH displays..
hitesh1792 said:
Can u give me a screenshot of what message does MIFLASH displays..
Click to expand...
Click to collapse
No message, its just absolutely empty , no device recognized.
zsajak said:
No message, its just absolutely empty , no device recognized.
Click to expand...
Click to collapse
What's your computer's OS? 32 bit or 64 bit?
hitesh1792 said:
What's your computer's OS? 32 bit or 64 bit?
Click to expand...
Click to collapse
64bit win 7
Is there a through way to cleanly remove all drivers including adb drivers? I hope its some kind of driver problem
I tried reinstalling the qualcomm driver in device manager but it didnt do anything.
zsajak said:
64bit win 7
Is there a through way to cleanly remove all drivers including adb drivers? I hope its some kind of driver problem
I tried reinstalling the qualcomm driver in device manager but it didnt do anything.
Click to expand...
Click to collapse
To recognize your device ur PC needs adb drivers...those get automatically installed once you connect your phone to your PC in normal mode or in fastboot mode...if you right click on my computer then click manage under device manager u will see android device under which it is written android debub interface...which means your device is recognized...
I have just got my phone today and have spent 5 hours trying to get to the point where the mi unlock software tells me to wait 72 hours.
I put my phone in fastboot mode and as soon as I connect it to the computer it disappears. Tried 5000 different ways to do this and even
wiped my pc with a clean install of windows but no matter what my phone is not recognized in the unlock tool. Please steer me in the right direction.
I'm sure I'm not the first person with this issue.
If I remember correctly, the unlock tool has an installable driver in the settings option. That should make the phone detectable in fastboot
satan89 said:
If I remember correctly, the unlock tool has an installable driver in the settings option. That should make the phone detectable in fastboot
Click to expand...
Click to collapse
yeah I did that
Apgibby said:
yeah I did that
Click to expand...
Click to collapse
You see the problem is within windows 10. I boot phone in fastboot mode
and my phone goes to a black screen and phone becomes unrecognized in windows.
Try using another computer, windows 7 if possible. Otherwise try using another usb cable
thunderskain said:
Try using another computer, windows 7 if possible. Otherwise try using another usb cable
Click to expand...
Click to collapse
no extra usb c cable I will install windows 7 on spare hard drive and try it again will post findings when done. thanks
I was facing the same issue, go to Device manager in Windows 10. In the View tab enable show hidden devices, then you should see Android Phone on the top. Click the right arrow and uninstall drivers under Android phone, connect your phone again and the drivers should be installed.
Windows 10 should detect your device in Fastboot mode now onwards.
Unkn0wNx said:
I was facing the same issue, go to Device manager in Windows 10. In the View tab enable show hidden devices, then you should see Android Phone on the top. Click the right arrow and uninstall drivers under Android phone, connect your phone again and the drivers should be installed.
Windows 10 should detect your device in Fastboot mode now onwards.
Click to expand...
Click to collapse
I did that and the minute I launched the unlocker the green fastboot went away and it says press any key to shut down.
Apgibby said:
I did that and the minute I launched the unlocker the green fastboot went away and it says press any key to shut down.
Click to expand...
Click to collapse
unlocker said proper driver installed but install screen stays greyed out. What a pain the butt this is.
If I recall it right you just have to go to the mi unlock site and apply, the unlock is bouund to the mi account.
Have you tried a different usb port? Heard pocophone is finicky on usb 3.0, maybe use a usb 2.0 port.
Try another USB port. It solved for me.
Apgibby said:
unlocker said proper driver installed but install screen stays greyed out. What a pain the butt this is.
Click to expand...
Click to collapse
If you are using AMD RYZEN, it won't recognise the phone. Use Intel or other AMD machines.
tnsmani said:
If you are using AMD RYZEN, it won't recognise the phone. Use Intel or other AMD machines.
Click to expand...
Click to collapse
no amd here running intel 8 series chipset tried all 6 available usb ports.
Apgibby said:
no amd here running intel 8 series chipset tried all 6 available usb ports.
Click to expand...
Click to collapse
Then try another PC/Laptop.
Apgibby said:
You see the problem is within windows 10. I boot phone in fastboot mode
and my phone goes to a black screen and phone becomes unrecognized in windows.
Click to expand...
Click to collapse
All my Xiaomi phones, including Poco F1, are recognized in Windows 10, and I've unlocked them all in Windows 10. So it shouldn't be Windows.
Why is your phone going to a black screen when you boot in fastboot mode ?
I don't know how to solve your problem though. I reboot my phone into fastboot while not connected to the PC, and it surely will show the fastboot animation screen. Then I plug in the cable to the PC, and the unlock tool will start its work.
Maybe redownload the MI unlocker tool ... or create a new MI account and re-bind that account under developer options ...
unlocking boot loader will wipe all the data right?
That is correct. You need to wait 3 days when unlocking the bootloader. That is Xiaomi's waiting period for the Pocophone.
Better than Samsung's 7 day wait, and better than LG's way of having to request an unlock key.
Sent from my POCOPHONE F1 using Tapatalk
@Apgibby
Are you putting the phone in bootloader mode, connect it to the PC and then opening the Mi Unlocker? The correct sequence is open the Unlocker, put your phone in bootloader mode and then connect it to the PC. Try it.
If still not working, open the adb command window on your PC, put your phone in bootloader mode and connect it to the PC. Now type "fastboot devices" (without the quotation marks). You should get a serial number with alphabets and numerals. If you get it, it is confirmation that your drivers for bootloader are working. Try this and let us know the result.
Lastly, try another PC.
Solved used windows 7 with usb 2.0 ports.
Hlo guys this problem start when i buy a new laptop which 3.0 usb ports. Then whenever i connect phone without fastboot it show press any key to shutdown and phone disconnected automatically.
I search a little and find that this bug is related to 3.0 usb ports.
But i got a fix for that. RIP my anglish.
This is also working for whyred violet etc
Read this also for better understanding:
https://forum.xda-developers.com/poco-f1/help/fastboot-problem-usb-3-0-ports-t3859995
Run this as administrator in pc:
https://drive.google.com/file/d/179poqE77RxswNGvefG_JA77dSk9EmRF9/view?usp=drivesdk
Take an usb2 hub?
ConradB said:
Take an usb2 hub?
Click to expand...
Click to collapse
It's working without using any usb hub
Can't believe modifying some registry values solved this! I almost went to buy a usb 2.0 cable. Many thanks
This worked for me and I hope the same goes for you all as well (
without using USB HUB and USB 2 port
).
I found the solution here .
Scenario:
1) Phone not detected with fastboot devices command
2) Phone goes into "Press any key to shutdown"
3) Just download this .bat file and run it as administrator
4) Remove your phone, get it back into fastboot mode (Power + Volume Down), connect it again
5) Open CMD and try to run any fastboot command & they'll run successfully.
P.S.: I too got my POCO F1 unlocked by using this with the modded MI Unlock app. Was tired of trying usb hub and extension thing though my PC is intel and not amd. It'll be happy to know how and what made it worked from technical aspect. Thank You.
Thank youuuuuuuuuu!!! for years now i couldnt do fastboot from my laptop only from my pc
Aadiiiiii said:
Hlo guys this problem start when i buy a new laptop which 3.0 usb ports. Then whenever i connect phone without fastboot it show press any key to shutdown and phone disconnected automatically.
I search a little and find that this bug is related to 3.0 usb ports.
But i got a fix for that. RIP my anglish.
This is also working for whyred violet etc
Read this also for better understanding:
https://forum.xda-developers.com/poco-f1/help/fastboot-problem-usb-3-0-ports-t3859995
Run this as administrator in pc:
https://drive.google.com/file/d/179poqE77RxswNGvefG_JA77dSk9EmRF9/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks, it really helped me out.
machikaa said:
This worked for me and I hope the same goes for you all as well (
without using USB HUB and USB 2 port
).
I found the solution here .
Scenario:
1) Phone not detected with fastboot devices command
2) Phone goes into "Press any key to shutdown"
3) Just download this .bat file and run it as administrator
4) Remove your phone, get it back into fastboot mode (Power + Volume Down), connect it again
5) Open CMD and try to run any fastboot command & they'll run successfully.
P.S.: I too got my POCO F1 unlocked by using this with the modded MI Unlock app. Was tired of trying usb hub and extension thing though my PC is intel and not amd. It'll be happy to know how and what made it worked from technical aspect. Thank You.
Click to expand...
Click to collapse
Thank you. it helped.